Waverider configurations derived from general conical flowfields

A method based on the computational fluid dynamics (CFD) is presented for a flexible waverider's design. The generating bodies of this method could be any cones. In addition, either the leading edge or the profile of the scramjet's inlet is used as the waverider's definition curve, parameterized by the quadric function, the sigmoid function or the B-spline function. Furthermore, several numerical examples are carried out to validate the method and the relevant codes. The CFD results of the configurations show that all the designs are successful. Moreover, primary suggestions are proposed for practical design by comparing the geometrical and aerodynamic performances of the cone-derived waveriders at Mach 6.

波前重建法射线追踪及走时表压缩

As a fast and effective method for approximate calculation of seismic numerical simulation, ray tracing method, which has important theory and practical application value, in terms of seismic theory and seismic simulation, inversion, migration, imaging, simplified from seismic theory according to geometric seismic, means that the main energy of seismic wave field propagates along ray paths in condition of high-frequency asymptotic approximation. Calculation of ray paths and traveltimes is one of key steps in seismic simulation, inversion, migration, and imaging. Integrated triangular grids layout on wavefront with wavefront reconstruction ray tracing method, the thesis puts forward wavefront reconstruction ray tracing method based on triangular grids layout on wavefront, achieves accurate and fast calculation of ray paths and traveltimes. This method has stable and reasonable ray distribution, and overcomes problems caused by shadows in conventional ray tracing methods. The application of triangular grids layout on wavefront, keeps all the triangular grids stable, and makes the division of grids and interpolation of a new ray convenient. This technology reduces grids and memory, and then improves calculation efficiency. It enhances calculation accuracy by accurate and effective description and division on wavefront. Ray tracing traveltime table, which shares the character of 2-D or 3-D scatter data, has great amount of data points in process of seismic simulation, inversion, migration, and imaging. Therefore the traveltime table file will be frequently read, and the calculation efficiency is very low. Due to these reasons, reasonable traveltime table compression will be very necessary. This thesis proposes surface fitting and scattered data compression with B-spline function method, applies to 2-D and 3-D traveltime table compression. In order to compress 2-D (3-D) traveltime table, first we need construct a smallest rectangular (cuboidal) region with regular grids to cover all the traveltime data points, through the coordinate range of them in 2-D surface (3-D space). Then the value of finite regular grids, which are stored in memory, can be calculated using least square method. The traveltime table can be decompressed when necessary, according to liner interpolation method of 2-D (3-D) B-spline function. In the above calculation, the coefficient matrix is stored using sparse method and the liner system equations are solved using LU decomposition based on the multi-frontal method according to the sparse character of the least square method matrix. This method is practiced successfully in several models, and the cubic B-spline function can be the best basal function for surface fitting. It make the construction surface smooth, has stable and effective compression with high approximate accuracy using regular grids. In this way, through constructing reasonable regular grids to insure the calculation efficiency and accuracy of compression and surface fitting, we achieved the aim of traveltime table compression. This greatly improves calculation efficiency in process of seismic simulation, inversion, migration, and imaging.

Predicting breeding values for milk yield of Guzera (Bos indicus) cows using random regression models

Given the importance of Guzera breeding programs for milk production in the tropics, the objective of this study was to compare alternative random regression models for estimation of genetic parameters and prediction of breeding values. Test-day milk yields records (TDR) were collected monthly, in a maximum of 10 measurements. The database included 20,524 records of first lactation from 2816 Guzera cows. TDR data were analyzed by random regression models (RRM) considering additive genetic, permanent environmental and residual effects as random and the effects of contemporary group (CG), calving age as a covariate (linear and quadratic effects) and mean lactation curve as fixed. The genetic additive and permanent environmental effects were modeled by RRM using Wilmink, All and Schaeffer and cubic B-spline functions as well as Legendre polynomials. Residual variances were considered as heterogeneous classes, grouped differently according to the model used. Multi-trait analysis using finite-dimensional models (FDM) for testday milk records (TDR) and a single-trait model for 305-days milk yields (default) using the restricted maximum likelihood method were also carried out as further comparisons. Through the statistical criteria adopted, the best RRM was the one that used the cubic B-spline function with five random regression coefficients for the genetic additive and permanent environmental effects. However, the models using the Ali and Schaeffer function or Legendre polynomials with second and fifth order for, respectively, the additive genetic and permanent environmental effects can be adopted, as little variation was observed in the genetic parameter estimates compared to those estimated by models using the B-spline function. Therefore, due to the lower complexity in the (co)variance estimations, the model using Legendre polynomials represented the best option for the genetic evaluation of the Guzera lactation records. An increase of 3.6% in the accuracy of the estimated breeding values was verified when using RRM. The ranks of animals were very close whatever the RRM for the data set used to predict breeding values. Considering P305, results indicated only small to medium difference in the animals' ranking based on breeding values predicted by the conventional model or by RRM. Therefore, the sum of all the RRM-predicted breeding values along the lactation period (RRM305) can be used as a selection criterion for 305-day milk production. (c) 2014 Elsevier B.V. All rights reserved.

Random regression models using different functions to model milk flow in dairy cows

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Random regression analyses using B-splines functions to model growth from birth to adult age in Canchim cattle

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Otimização de forma aplicando B-splines sob critério integral de tensões

This work proposes a computational methodology to solve problems of optimization in structural design. The application develops, implements and integrates methods for structural analysis, geometric modeling, design sensitivity analysis and optimization. So, the optimum design problem is particularized for plane stress case, with the objective to minimize the structural mass subject to a stress criterion. Notice that, these constraints must be evaluated at a series of discrete points, whose distribution should be dense enough in order to minimize the chance of any significant constraint violation between specified points. Therefore, the local stress constraints are transformed into a global stress measure reducing the computational cost in deriving the optimal shape design. The problem is approximated by Finite Element Method using Lagrangian triangular elements with six nodes, and use a automatic mesh generation with a mesh quality criterion of geometric element. The geometric modeling, i.e., the contour is defined by parametric curves of type B-splines, these curves hold suitable characteristics to implement the Shape Optimization Method, that uses the key points like design variables to determine the solution of minimum problem. A reliable tool for design sensitivity analysis is a prerequisite for performing interactive structural design, synthesis and optimization. General expressions for design sensitivity analysis are derived with respect to key points of B-splines. The method of design sensitivity analysis used is the adjoin approach and the analytical method. The formulation of the optimization problem applies the Augmented Lagrangian Method, which convert an optimization problem constrained problem in an unconstrained. The solution of the Augmented Lagrangian function is achieved by determining the analysis of sensitivity. Therefore, the optimization problem reduces to the solution of a sequence of problems with lateral limits constraints, which is solved by the Memoryless Quasi-Newton Method It is demonstrated by several examples that this new approach of analytical design sensitivity analysis of integrated shape design optimization with a global stress criterion purpose is computationally efficient

Inhibin B and ovarian function after total abdominal hysterectomy in women of reproductive age

The aim of this prospective study was to assess ovarian function using clinical and endocrine parameters in women of reproductive age who underwent total abdominal hysterectomy. Sixty-one women, aged ≤ 40 years, were allocated into two groups: group 1, consisting of 31 patients who had hysterectomy, and group 2, consisting of 30 normal women. Inclusion criteria were normal ovarian function at baseline, normal body weight, no hormonal diseases and basal follicle stimulating hormone (FSH) level of < 15 mIU/ml. FSH, luteinizing hormone (LH), estradiol and inhibin B levels as well as maturation value (MV) were measured by vaginal cytology on three occasions: baseline, and 6 and 12 months after hysterectomy. Analysis of variance, the Friedman test, Mann-Whitney test and t-test statistics were employed to compare the two groups. At baseline the groups were homogeneous. At months 6 and 12, hysterectomized women showed decreased median values of inhibin B, increased median values of estradiol (p < 0.05), unchanged median values of FSH and LH, and decreased median values of MV (p < 0.05). In the hysterectomy group, 12.9% (4/31) of the patients had FSH levels of > 40 mIU/ml, estradiol of < 20 pg/ml and inhibin B of < 5 ng/ml, compatible with ovarian failure. In the control group, all the parameters studied remained unchanged. These results suggest that total abdominal hysterectomy accelerates the decline in ovarian function in women of reproductive age.

基于逆向参数化的B样条曲面重建算法

目的解决B样条曲面重建问题中矩形拓扑网自动生成和参数化两大难点问题,提出一种基于逆向参数化的B样条曲面重建算法.方法首先构建基曲面,在基曲面上根据参数(u,v)进行采样,沿其法线方向进行数据的滤波和精简,求得参数(u,v)对应的精简点,然后对采样求取的精简点集进行B样条曲面拟合,该方法提供了B样条曲面重建的一个新思路.结果新算法突破了传统密集散乱点云数据的B样条曲面重建基本过程,采用与正向参数化相反的过程进行参数化,解决了B样条曲面重建问题中矩形拓扑网自动生成和参数化的难题;具体试验分析表明新算法不仅在参数化的同时完成了数据滤波和精简,而且在时间和迭代效率方面都具有优势.结论新算法避免了求取法线的迭代过程,并且可以较容易的实现矩形拓扑网的自动生成,新算法在自主开发的智能测量建模加工一体化装备中得到了应用验证.

监控式水下机械手及相关技术的研究

水下机械手作为水下机器人通用作业工具得到广泛地应用，目前水下机械手的主要操作方式为主从方式。虽然主从方式具有操作直观，灵活的特点，但难于完成需要精确定位，轨迹控制的水下作用，如海洋石油钻井平台导管架的检查作用。为了扩展水下机器人的作业能力，提高水下作业智能化程度，沈阳自动化所承担国家863课题“水下虚拟遥操作与监控机械手系统”关键技术的研究工作。作者参加了此课题的研究工作，以Schilling水下机械手为研究对象，深入研究机械手的作用功能，对机械手的逆运动学，焊缝空间轨迹规划作了深入的研究，形成本文阐述的主要内容。由于Schilling水下机械手各关节之间的连接参数中存在多个偏距，其运动学逆解不能简单由解析方式给出。机械手进行控制与轨迹规划等操作必须找到一种快速求解的方法。本篇文章得出一种基于信赖域法的机械手运动学逆解算法。由于该算法具有收敛速度快的特点，故可以被应用于在线求解机械手运动学逆解；由于没有直接求解二阶导数，故不存在奇异解的问题。经理论分析和实验证明该方法在解决水下监控机械手在线跟踪水下结构物空间轨迹的技术问题具有较好的效果。作为课题的实际应用背景的导管架焊缝曲面为一复杂的空间曲面。为了实现课题的研究目标，本课题不仅要求解焊缝的轨迹，而且要给出其法线方向。对于这样一个问题，用空间解析几何和微分几何方法是很难求解的，本文给出了一种基于B样条参数曲面及曲面求交的方法，具有速度快，通用性强的优点。

B Cell Activation in Insulin Resistance and Obesity

Our group has demonstrated that inflammatory diseases such as type 2 diabetes (DM), inflammatory bowel disease (IBD), and periodontal disease (PD) are associated with altered B cell function that may contribute to disease pathogenesis. B cells were found to be highly activated with characteristics of inflammatory cells. Obesity is a pre-disease state for cardiovascular disease and type 2 diabetes and is considered a state of chronic inflammation. Therefore, we sought to better characterize B cell function and phenotype in obese patients. We demonstrate that (Toll-like receptor) TLR4 and CD36 expression by B cells is elevated in obese subjects, suggesting increased sensing of lipopolysaccharide (LPS) and other TLR ligands. These ligands may be of microbial, from translocation from a leaky gut, or host origin. To better assess microbial ligand burden and host response in the bloodstream, we measured LPS binding protein (LBP), bacterial/permeability increasing protein (BPI), and high mobility group box 1 (HMGB1). Thus far, our data demonstrate an increase in LBP in DM and obesity indicating increased responses to TLR ligands in the blood. Interestingly, B cells responded to certain types of LPS by phosphorylating extracellular-signal-regulated kinases (ERK) 1/2. A better understanding of the immunological state of obesity and the microbial and endogenous TLR ligands that may be activating B cells will help identify novel therapeutics to reduce the risk of more dangerous conditions, such as cardiovascular disease.

Surface Reconstruction from Multiple Views using Rational B-Splines

A method for reconstructing 3D rational B-spline surfaces from multiple views is proposed. The method takes advantage of the projective invariance properties of rational B-splines. Given feature correspondences in multiple views, the 3D surface is reconstructed via a four step framework. First, corresponding features in each view are given an initial surface parameter value (s; t), and a 2D B-spline is fitted in each view. After this initialization, an iterative minimization procedure alternates between updating the 2D B-spline control points and re-estimating each feature's (s; t). Next, a non-linear minimization method is used to upgrade the 2D B-splines to 2D rational B-splines, and obtain a better fit. Finally, a factorization method is used to reconstruct the 3D B-spline surface given 2D B-splines in each view. This surface recovery method can be applied in both the perspective and orthographic case. The orthographic case allows the use of additional constraints in the recovery. Experiments with real and synthetic imagery demonstrate the efficacy of the approach for the orthographic case.

Surface Reconstruction from Multiple Views using Rational B-Splines and Knot Insertion

A method for reconstruction of 3D rational B-spline surfaces from multiple views is proposed. Given corresponding features in multiple views, though not necessarily visible in all views, the surface is reconstructed. First 2D B-spline patches are fitted to each view. The 3D B-splines and projection matricies can then be extracted from the 2D B-splines using factorization methods. The surface fit is then further refined via an iterative procedure. Finally, a hierarchal fitting scheme is proposed to allow modeling of complex surfaces by means of knot insertion. Experiments with real imagery demonstrate the efficacy of the approach.

B-lymphocyte effector functions in health and disease.

B-lymphocytes have traditionally been thought to contribute to immunity and autoimmune disease through terminal differentiation into plasma cells that secrete antibody. However, studies in mice and recent clinical studies have demonstrated that genetically altered B-cell function and B-cell-targeted therapies can significantly affect autoimmune diseases that were predominantly thought to be T-cell-mediated. B-cell depletion in mouse models of disease has also led to the identification of alternative B-cell effector functions that regulate normal immune responses and autoimmune disease. This review highlights multiple B-cell effector mechanisms, including the promotion of cellular immunity, the negative regulation of immune responses, and the production of pathogenic antibodies.

Single ionization of helium by antiproton impact

We study the ionization of helium (fie) in collision with antiprotons (p) in the energy range from 10 keV to 1000 keV. We adopt a semiclassical single center close coupling approach in which the wave function for the electron is expanded in a B-spline basis centered on the nucleus of the He atom, The calculations are performed using two different models: the independent particle (IP) model and the one-electron (OE) approximation. The interaction between the active electron and the rest of the atom, i.e. passive electron and nucleus, is represented by a model potential. The results obtained are compared with experimental data as well as with existing theoretical calculations. (c) 2005 Published by Elsevier B.V.