Análise dos efeitos das deformações estruturais sobre a transferência transversal de carga em um veículo do tipo fórmula SAE submetido a uma aceleração lateral constante

This paper studies the frame deformations on a formula SAE vehicle in steady-state cornering and its influence on the lateral load transfers and, consequently, on the tires normal loads due to the applied lateral load. For a vehicle with a perfect rigid frame, the vehicle mass, the position of the center of gravity and the suspensions are the only factors responsible for the load distribution between the tires. When the frame deformations are no longer negligible, the frame deformations affect the loaddistribution between the tires. The frame flexibility turns it able to behave as an additional set of springs to the suspension system, thus changing the behavior of the set. This paper describes howit happens and suggests ways to minimize this phenomenon

Prospecção de novos negócios numa indústria de autopeças: diagnóstico de falhas e sugestões de ferramentas para melhoria

The growth and expansion in auto parts market are directly related to the ability of a company to innovate and gain new customers, increasing its portfolio of customers and products. For this purpose the process of prospecting for new business has become a key process in companies seeking this goal, which requires teams and structures dedicated to it. Besides counting on available resources to carry out prospecting, it is necessary to properly manage the process as a whole, whose main result is a business proposal, which may lead to closer relations with the potential client and the activation of a new business. Process failures and difficulties to formulate a commercial proposal lead to documents produced without the quality needed that makes it harder to obtain new business. The objective of this study is to evaluate the process of new businesses quotation in the auto parts industry and indicate opportunities for improving this process. This goal is achieved by mapping the current process, from the diagnosis of problems and the indication of tools that can prevent or minimize the problems diagnosed. The information supporting this study were obtained by the bibliographical research, participant observation of the process, unstructured interviews with some of the involved people in the process and prospecting tools that can improve it. It results the mapping of new business quotation process, the points indicated as failures and difficulties in the process and the appointment of project management tools that can bring improvements to the new business proposals and pointing the moment for your application in the process

Procedimentos para análise de lucratividade de produtos no setor de autopeças metálicas

In a globalized world, organizations face an increasingly dynamic, innovative and competitive environment, so that this condition requires continuous adaptation to market developments. Intense competition requires organizations to further improve their performance, making productive efficiency a key factor for survival. A methodology that has added value to the product through a reconfiguration of the production method is the implementation of a management philosophy called Lean Six Sigma. The main objective of this work is, in the light of the Lean Six Sigma philosophy, intervene in a critical-collaborative way to develop procedures for analyzing the profitability of products in a company specializing in steel processing. To achieve this goal, were applied the method of action-research to intervene in a group of professionals for the study of the profitability of products in a auto parts industry. The interaction of practical and theoretical knowledge provided by the action-research allowed the business program was enhanced. The procedures proposed in this study were able to identify the current profitability of the product, the main causes of inefficiency and productive for solutions to reduce production inefficiencies, when the productive systems planned and actual production system were compared. The results indicate that current profitability of -3%, while the parameter provided during budget was 10%. Thus, it is concluded that the low profitability of the products may compromise the company's financial results and affect their competitiveness in the market. To address this problem, the Lean Six Sigma presents itself as a versatile and high applicability philosophy, providing relevant results for characterization and troubleshooting. It was also observed that the evidence presented in this paper can be adapted to other companies in the metal auto parts segment to identify and recover the profitability of products

Modelagem e simulação do mecanismo biela manivela e análise estrutural de biela automotiva

Nowadays, the automotive industry is working to optimize the design of engines, in order to reduce the fuel consumption with acceptable efficiency ratio. This undergraduate thesis is aimed at perform a kinematic/dynamic analysis of a slider-crank mechanism that is part of a four stroke internal combustion engine, the same engine that was used in the analysis described by Montazersadhd and Fatemi (2007). Two algorithms were developed based on Kane’s method to calculate velocities and accelerations of the mechanism bodies, and provide the acting forces at connecting rod joints. A SimMechanics model was developed to simulate the engine, and monitoring the same parameters that were calculated with the algorithms. The results obtained with both approaches were satisfactory and showed good agreement with the values provided by Montazersadhd and Fatemi (2007). The obtained results showed that the axial component of the rod joint efforts was caused by the pressure exerted on the piston head,whereas the radial component was related with the action of inertia loads. Besides, this thesis presents a connecting rod assembly mesh that is going to be used for static and fatigue finite element analysis in the future

Estimativa das emissões de monóxido de carbono por veículos automotivos na cidade de Campinas/SP utilizando o modelo CAL3QHCR

Air pollution is an environmental issue worldwide and frequently cause negative effects on population health and ecosystems on cities. The relationship between climate and atmospheric pollution can be used as a surrogate to the intensity of air pollution. The present and quantity of some gases can be used as indicators to air quality: particulate matter (PM), sulfur dioxide (SO2), carbon monoxide (CO), ozone (O3), and nitrogen dioxide (NO2). Among those gases, CO has its major source within the cities, where automobiles are the main emitter. But measure pollutant concentration are challenging, sometimes because the lack of good equipments due to high costs and of the large variability of models that varies in precision, way of measure and distribution of sellers. Modeling are useful when there are an intend to evaluate air pollution, its sources and evaluate scenarios. This work aims to use CAL3QHCR model developed by the U.S Environmental Protection Agency (EPA) to generate predictive surfaces of CO concentration distribution on a site within Campinas city, located in São Paulo state, Brazil. CAL3QHCR model use data urban automobile circulation to generate spatial results for CO distribution. We observed that the pollution concentration was lower on our modeling than the concentrations measured by Companhia Ambiental do Estado de São Paulo (CETESB), the main environmental company on the São Paulo state. Also the correlation between average estimates of our model and the measure by CETESB was weak, indicating that the model used on this study need to be or better parameterized, or the scale we measured of CO emissions need to be rescaled. Although the model failed to correlate to CETESB data, maybe one that explore the estimated emissions distributed within the sites to understand spatial distributions of CO on the regions. Also, the generated information can also be used to other studies, and come to be useful to explain heat island

Estudo da sinistralidade no mercado securitário de veículos: uma abordagem multivariada

Pós-graduação em Engenharia de Produção - FEB

Análise de fadiga em rodas automotivas utilizando método dos elementos finitos

The increasing search for better performance at the automotive industry, especially on the matter of fuel consumption, caused a progressive evolution of industrial technology. For the wheel this study is based on the try of reducing mass and decreasing the moment of inertia, characteristics that directly reflect on the performance parameter, as consumption and acceleration, so that it also is effective on the growth of the profit margin, since it reduces the costs of the locomotion. In this paper will be applied the Finite Element Analysis to explain the wheel behavior and identify ways to improve the performance. To the analyze it will be simulated a test condition established by ABNT NBR 6751:2009 foreseeing a possible collapse through general yielding and fatigue. The load here presented results from the equation presented on the norms and in the datas provided by the manufacturer

Estudo sobre o gerenciamento de projeto de desenvolvimento de um veículo Baja para competições

This paper presents a study of practices in project management of a college team that participates in Baja SAE competitions. The use of management techniques can deliver benefits to the project in terms of meeting customer needs, use of time and resources and minimization of risks, for example. Should be sought methods and techniques in agreement with the project context and the team that leads it. This paper analyzes a specific case of baja vehicle project management, obtaining data by means of literature research, archival research and interviews with students on the team (structured and unstructured). The study allowed to relate the practices used by the team and to identify possible areas for improvement, based on the literature on project management. There was thus obtained a set of recommendations for the current team, in future initiatives, and to other teams responsible for carrying out similar projects

Analise de desgaste em materiais aplicados em discos de freio

Baja SAE competitions challenge engineering students to design and build offroad vehicles, preparing them for the competitive job market. This monograph aims to study a part of the braking of a Baja SAE vehicle system, the brake disc. Giving attention to the wear suffered by discs of two different materials, steel 1045 and stainless steel 304, helping the team Piratas do Vale Bardahl in the best selection between them. Braking tests were performed on a test bench. Both discs have suffered the same braking conditions. Brake pads material, brake line pressure, braking time, number of braking, were parameters which were repeated in the testing of different types of disk, in order to ensure a high power comparison between the obtained data. Before and after the disk tests were weighed and measured, to make a comparison. After the brake tests, the disks were subjected to hardness and surface roughness testing. With the data collected and observations made in the worn parts, the comparison between these two materials was made, obtaining a selection of the best material for the team. The tests showed that steel 1045 has more advantages, compared to stainless steel 304, when applied to brake discs, on the tested conditions

Desenvolvimento de estrutura para purificação de água potável, através da irradiação de UV com lâmpadas fluorescentes especiais

Pós-graduação em Engenharia Elétrica - FEIS

Habilidades sociais e comportamento do motorista entre universitárias usuárias e não usuárias de bebida alcoólica

Pós-graduação em Educação - FFC

Projeto DMAIC com ferramentas Seis Sigma para redução de sucata em uma multinacional do ramo de acessórios automobilísticos

In this era of globalization, with fierce competition in the labor market, using the reduction cost strategy and resources optimization, has become a competitive advantage. In this graduation study, it will be exposed in form of case study the DMAIC project (Define Measure Analyze Improve Control) execution, using of Six Sigma's tools, statistical and quality knowledge, with intent of analyze, improve and control the processes of a selected problem, always demonstrating good practice of methodologies. In an auto parts multinational branch, It was identified a high scrap rate in one of his production lines. This work will study this problem to improve their processes and ensure that these improvements are perpetual. As a result, reached the stipulated goals, increasing Corporation's Intellectual, thereby providing a competitive advantage

Recomendações para criação e gerenciamento de um sistema da qualidade em empresas de autopeças

This paper addresses the difficulties and best practices of a quality system of an automotive parts company. In it will be discussed the features and benefits of the proper use of a system of management and quality assurance. It emphasizes the proper use of tools and methodologies that aim improving the quality of processes and products. It also has some guidance information given by the standards of quality which helps the implementation of the quality system and the standards are important because it attests to the quality of companies. So, this work has as objective to guide the creation and management of the quality system in auto parts companies, which seek an increase in the quality of products and processes, it also helps to certify companies in the current quality standard for the sector, ISO TS 16949, and thus increases the competitiveness of companies in this market. As result, this paper resumes good practices, difficulties and key steps for creating and managing a quality system

Desenvolvimento, validação, avaliação da incerteza de medição e análise de custos de método baseado em espectroscopia no infravermelho e análise multivariada para previsão de parâmetros de qualidade de amostras de E85

Pós-graduação em Química - IQ

Engine LES with fuel-spray modeling

Pós-graduação em Engenharia Mecânica - FEG