The Influence of Pre-Migration Factors and Post-Migration Climate of the Receiving Community on the Psychological Distress of Latino Immigrants

Over forty million foreign-born residents currently live in the United States. Latinos make up the largest population of immigrants living in the U.S. Previous research suggests that Latino immigrants often experience pre-migration stressors, such as traumatic experiences, political upheaval, and unplanned migration. These stressors may have a negative impact on immigrants’ post-migration mental health. Research also suggests that the post-migration climate of the receiving community may inform the connection between pre-migration experiences and post-migration mental health. The current study examined the relationship between Latino immigrants’ reasons for migration, migration planning, and pre-migration experience of political and/or interpersonal violence, and post-migration symptoms of psychological distress. In addition to examining the effect of these pre-migration factors, the current study also examined the community “climate” experienced by Latino immigrants post-migration by assessing the influence of three post-migration factors: 1) community support and engagement, 2) discrimination, and 3) employment. The study was a secondary analysis of data collected for the National Latino and Asian American Study, which focused on the mental health and service utilization of Latinos and Asian Americans. Participants included 1,629 Latino immigrants from across the United States. Results indicated that pre-migration experience of political and/or interpersonal trauma, post-migration experience of discrimination, and female sex were positively associated with psychological distress. Post-migration employment was negatively associated with psychological distress. In addition, discrimination modified the association between unplanned migration and psychological distress; the relationship between unplanned migration and psychological distress decreased for participants who reported more discrimination. Furthermore, employment modified the association between political and/or interpersonal trauma and psychological distress; the connection between trauma and psychological distress increased among those who reported having less employment. Recommendations for further research were presented. Policy and clinical practice implications were discussed, particularly given the current climate of high anti-immigrant sentiment and hostility in the U.S.

NEW DATA ON THE CHRONOLOGY OF THE VALE DO FORNO SEDIMENTARY SEQUENCE (LOWER TAGUS RIVER TERRACE STAIRCASE) AND ITS RELEVANCE AS FLUVIAL ARCHIVE OF THE MIDDLE PLEISTOCENE IN WESTERN IBERIA

NEW DATA ON THE CHRONOLOGY OF THE VALE DO FORNO SEDIMENTARY SEQUENCE (LOWER TAGUS RIVER TERRACE STAIRCASE) AND ITS RELEVANCE AS FLUVIAL ARCHIVE OF THE MIDDLE PLEISTOCENE IN WESTERN IBERIA Pedro P. Cunha 1, António A. Martins 2, Jan-Pieter Buylaert 3,4, Andrew S. Murray 4, Luis Raposo 5, Paolo Mozzi 6, Martin Stokes 7 1 MARE - Marine and Environmental Sciences Centre, Department of Earth Sciences, University of Coimbra, Portugal: pcunha@dct.uc.pt 2 MARE - Marine and Environmental Sciences Centre, Dep. Geociências, University of Évora, Portugal; aam@uevora.pt 3 Centre for Nuclear Technologies, Technical University of Denmark, Risø Campus, Denmark; jabu@dtu.dk 4 Nordic Laboratory for Luminescence Dating, Aarhus University, Risø DTU, Denmark; anmu@dtu.dk 5 Museu Nacional de Arqueologia, Lisboa, Portugal; 3raposos@sapo.pt 6 Department of Geosciences, University of Padova, Italy; paolo.mozzi@unipd.it 7 School of Geography, Earth and Environmental Sciences, University of Plymouth, UK; m.stokes@plymouth.ac.uk The stratigraphic units that record the evolution of the Tagus River in Portugal (study area between Vila Velha de Ródão and Porto Alto villages; Fig. 1) have different sedimentary characteristics and lithic industries (Cunha et al., 2012): - a culminant sedimentary unit (the ancestral Tagus, before the drainage network entrenchment) – SLD13 (+142 to 262 m above river bed – a.r.b.; with probable age ca. 3,6 to 1,8 Ma), without artefacts; - T1 terrace (+84 to 180 m; ca. 1000? to 900 ka), without artefacts; - T2 terrace (+57 to 150 m; top deposits with a probable age ca. 600 ka), without artefacts; - T3 terrace (+43 to 113 m; ca. 460 to 360? ka), without artefacts; - T4 terrace (+26 to 55 m; ca. 335 a 155 ka), Lower Paleolithic (Acheulian) at basal and middle levels but early Middle Paleolithic at top levels; - T5 terrace (+5 to 34 m; 135 to 73 ka), Middle Paleolithic (Mousterian; Levallois technique); - T6 terrace (+3 to 14 m; 62 to 32 ka), late Middle Paleolithic (late Mousterian); - Carregueira Sands (aeolian sands) and colluvium (+3 a ca. 100 m; 32 to 12 ka), Upper Paleolithic to Epipaleolithic; - alluvial plain (+0 to 8 m; ca. 12 ka to present), Mesolithic and more recent industries. The differences in elevation (a.r.b.) of the several terrace staircases results from differential uplift due to active faults. Longitudinal correlation with the terrace levels indicates that a graded profile ca. 200 km long was achieved during terrace formation periods and a strong control by sea base level was determinant for terrace formation. The Neogene sedimentary units constituted the main source of sediments for the fluvial terraces (Fig. 2). Geomorphological mapping, coupled with lithostratigraphy, sedimentology and luminescence dating (quartz-OSL and K-feldspar post-IRIR290) were used in this study focused on the T4 terrace, which comprises a Lower Gravels (LG) unit and an Upper Sand (US) unit. The thick, coarse and dominantly massive gravels of the LG unit indicate deposition by a coarse bed-load braided river, with strong sediment supply, high gradient and fluvial competence, during conditions of rapidly rising sea level. Luminescence dating only provided minimum ages but it is probable that the LG unit corresponds to the earlier part of the MIS9 (ca. 335 to 325 ka), immediately postdating the incision promoted by the very low sea level (reaching ca. -140 m) during MIS10 (362 to 337 ka), a period of relatively cold climate conditions with weak vegetation cover on slopes and low sea level. Fig. 1. Main Portuguese reaches in which the Tagus River can be divided (Lower Tagus Basin): I – from the Spanish border to Arneiro (a general E–W trend, mainly consisting of polygonal segments); II – from Arneiro to Gavião (NE–SW); III – from Gavião to Arripiado (E–W); IV – from Arripiado to Vila Franca de Xira (NNE-SSW); V – from Vila Franca de Xira to the Atlantic shoreline. The faults considered to be the limit of the referred fluvial sectors are: F1 – Ponsul-Arneiro fault (WSW-ENE); F2 – Gavião fault (NW-SE); F3 – Ortiga fault (NW-SE); F4 – Vila Nova da Barquinha fault (W-E); F5 – Arripiado-Chamusca fault (NNE-SSW). 1 – estuary; 2 – terraces; 3 – faults; 4 – Tagus main channel. The main Iberian drainage basins are also represented (inset). The lower and middle parts of the US unit, comprising an alternation of clayish silts with paleosols and minor sands to the east (flood-plain deposits) and sand deposits to the west (channel belt), have a probable age of ca. 325 to 200 ka. This points to formation during MIS9 to MIS7, under conditions of high to medium sea levels and warm to mild conditions. The upper part of the US unit, dominated by sand facies and with OSL ages of ca. 200 to 154 ka, correlates with the early part of the MIS6. During this period, progradation resulted from climate deterioration and relative depletion of vegetation that promoted enhanced sediment production in the catchment, coupled with initiation of sea-level lowering that increased the longitudinal slope. The Vale do Forno and Vale da Atela archaeological sites (Alpiarça, central Portugal) document the earliest human occupation in the Lower Tagus River, well established in geomorphological and environmental terms, within the Middle Pleistocene. The Lower Palaeolithic sites were found on the T4 terrace (+26 m, a.r.b.). The oldest artefacts previously found in the LG unit, display crude bifacial forms that can be attributed to the Acheulian, with a probable age of ca. 335 to 325 ka. The T4 US unit has archaeological sites stratigraphically documenting successive phases of an evolved Acheulian, that probably date ca. 325 to 300 ka. Notably, these Lower Palaeolithic artisans were able to produce tools with different sophistication levels, simply by applying different strategies: more elaborated reduction sequences in case of bifaces and simple reduction sequences to obtain cleavers. Fig. 2. . Simplified geologic map of the Lower Tagus Cenozoic basin, adapted from the Carta Geológica de Portugal, 1/500000, 1992). The study area (comprising the Vale do Forno and Vale de Atela sites) is located on the more upstream sector of the Lower Tagus River reach IV, between Arripiado and Chamusca villages. 1 – alluvium (Holocene); 2 – terraces (Pleistocene); 3 – sands, silts and gravels (Paleogene to Pliocene); 4 – Sintra Massif (Cretaceous); 5 – limestones, marls, silts and sandstones (Mesozoic); 6 – quartzites (Ordovician); 7 – basement (Proterozoic to Palaeozoic); 8 – main fault. The main Portuguese reaches of the Tagus River are identified (I to V). The VF3 site (Milharós), containing a Final Acheulian industry, with fine and elaborated bifaces) found in a stratigraphic level located between the T4 terrace deposits and a colluvium associated with Late Pleistocene aeolian sands (32 to 12 ka), has an age younger than ca. 154 ka but much older than 32 ka. In the study area, the sedimentary units of the T4 terrace seem to record the river response to sea-level changes and climatically-driven fluctuations in sediment supply. REFERENCES Cunha P. P., Almeida N. A. C., Aubry T., Martins A. A., Murray A. S., Buylaert J.-P., Sohbati R., Raposo L., Rocha L., 2012, Records of human occupation from Pleistocene river terrace and aeolian sediments in the Arneiro depression (Lower Tejo River, central eastern Portugal). Geomorphology, vol. 165-166, pp. 78-90.

Advanced studies on two animal models, murine and fish. RadKI21A626T mouse model: new insights into molecular mechanisms of enteric neuro-epithelial pathology. European sea bass: study of the effects of essential oils in different diets on the gastric system.

My PhD research period was focused on the anatomical, physiological and functional study of the gastrointestinal system on two different animal models. In two different contexts, the purpose of these two lines of research was contribute to understand how a specific genetic mutation or the adoption of a particular dietary supplement can affect gastrointestinal function. Functional gastrointestinal disorders are chronic conditions characterized by symptoms for which no organic cause can be found. Although symptoms are generally mild, a small subset of cases shows severe manifestations. This subset of patients may also have recurrent intestinal sub-occlusive episodes, but in absence of mechanical causes. This condition is referred to as chronic intestinal pseudo-obstruction, a rare, intractable chronic disease. Some mutations have been associated with CIPO. A novel causative RAD21 missense mutation was identified in a large consanguineous family, segregating a recessive form of CIPO. The present thesis was aimed to elucidate the mechanisms leading to neuropathy underlying CIPO via a recently developed conditional KI mouse carrying the RAD21 mutation. The experimental studies are based on the characterization and functional analysis of the conditional KI Rad21A626T mouse model. On the other hand aquaculture is increasing the global supply of foods. The species selected and feeds used affects the nutrients available from aquaculture, with a need to improve feed efficiency, both for economic and environmental reasons, but this will require novel innovative approaches. Nutritional strategies focused on the use of botanicals have attracted interest in animal production. Previous research indicates the positive results of using essential oils (EOs) as natural feed additives for several farmed animals. Therefore, the present study was designed to compare the effects of feed EO supplementation in two different forms (natural and composed of active ingredients obtained by synthesis) on the gastric mucosa in European sea bass.

Ecodesign methods focused on remanufacturing

Understanding the product`s `end-of-life` is important to reduce the environmental impact of the products` final disposal. When the initial stages of product development consider end-of-life aspects, which can be established by ecodesign (a proactive approach of environmental management that aims to reduce the total environmental impact of products), it becomes easier to close the loop of materials. The `end-of-life` ecodesign methods generally include more than one `end-of-life` strategy. Since product complexity varies substantially, some components, systems or sub-systems are easier to be recycled, reused or remanufactured than others. Remanufacture is an effective way to maintain products in a closed-loop, reducing both environmental impacts and costs of the manufacturing processes. This paper presents some ecodesign methods focused on the integration of different `end-of-life` strategies, with special attention to remanufacturing, given its increasing importance in the international scenario to reduce the life cycle impacts of products. (C) 2009 Elsevier Ltd. All rights reserved.

A method to estimate EMG crosstalk between two muscles based on the silent period following an H-reflex

The crosstalk phenomenon consists in recording the volume-conducted electromyographic activity of muscles other than that under study. This interference may impair the correct interpretation of the results in a variety of experiments. A new protocol is presented here for crosstalk assessment between two muscles based on changes in their electrical activity following a reflex discharge in one of the muscles in response to nerve stimulation. A reflex compound muscle action potential (H-reflex) was used to induce a silent period in the muscle that causes the crosstalk, called here the remote muscle. The rationale is that if the activity recorded in the target muscle is influenced by a distant source (the remote muscle) a silent period observed in the electromyogram (EMG) of the remote muscle would coincide with a decrease in the EMG activity of the target muscle. The new crosstalk index is evaluated based on the root mean square (RMS) values of the EMGs obtained in two distinct periods (background EMG and silent period) of both the remote and the target muscles. In the present work the application focused on the estimation of the degree of crosstalk from the soleus muscle to the tibialis anterior muscle during quiet stance. However, the technique may be extended to other pairs of muscles provided a silent period may be evoked in one of them. (C) 2009 IPEM. Published by Elsevier Ltd. All rights reserved.

Effect of the Impact Conditions on the Mechanical Properties of Injection-Molded Parts

This work focused on the study of the impact event on molded parts in the framework of automotive components. The influence of the impact conditions and processing parameters on the mechanical behavior of talc-filled polypropylene specimens was analyzed. The specimens were lateral-gate discs produced by injection molding, and the mechanical characterization was performed through instrumented falling weight impact tests concomitantly assisted with high-speed videography. Results analyzed using the analysis of variance (ANOVA) method have shown that from the considered parameters, only the dart diameter and test temperature have significant influence on the falling weight impact properties. Higher dart diameter leads to higher peak force and peak energy results. Conversely, higher levels of test temperatures lead to lower values of peak force and peak energy. By means of high-speed videography, a more brittle fracture was observed for experiments with higher levels of test velocity and dart diameter and lower levels of test temperature. The injection-molding process conditions assessed in this study have an influence on the impact response of moldings, mainly on the deformation capabilities of the moldings.

The Carboniferous Baralacha La basaltic dykes (Upper Lahul, Ladakh): remnants of an early rifting event along the Indian northern plate

The Lower Carboniferous Baralacha La basaltic dykes were emplaced along transtensional faults. The basalts exhibit tholeiitic and alkaline affinities. The tholeiites are TiO2-poor, moderately enriched in light rare earth (LREE), and display Nb and Ta negative and Th positive anomalies. The alkali basalts, compared to the tholeiites, have higher TiO2, rare earth and highly incompatible trace element contents and greater LREE enrichments. The Nd and Pb isotope compositions of the Baralacha La basalts suggest that they derive from the partial melting of an enriched OIB mantle source. characterized by a HIMU component, and contaminated by the lower continental crust. The Baralacha La dyke swarm represent the remnants of an early rifting event on the northern Indian passive margin.

The use of the Family Management Style Framework to evaluate the family management of liver transplantation in adolescence

Objective: To understand the family management experience of liver transplantation during adolescence based on the Family Management Style Framework(FMSF). Method: This is a case study that used the FMSF as theoretical framework and the hybrid model of thematic analysis as methodological reference. The case presented is from an adolescent’s family that lives in Salvador, Bahia. The data were collected through interviews with the mother and the patient charts analysis. Results: The results shows that the family defines the transplantation as threatening and there are divergence between mother and daughter related to the teen’s capabilities perception. Facing those discrepancies, the family assumes a protective posture by believing that the teen cannot take care of herself alone. The perceived consequences reflect how much the uncertainty permeates the family environment. Conclusion: It is concluded that the use of a model to evaluate the management can help professionals to direct and plan specific interventions.



On the success of generalized food deception in orchids : the role of sympatric rewarding species and pollinators

Résumé : La production de nectar assure aux plantes entomophiles un important succès reproducteur. Malgré cela, de nombreuses espèces d'orchidées ne produisent pas de nectar. La majorité de ces orchidées dites trompeuses exploitent simplement l'instinct des pollinisateurs généralistes, qui les pousse à chercher du nectar dans les fleurs. Afin d'optimiser la récolte de nectar, les pollinisateurs apprennent à différencier les fleurs trompeuses des nectarifères, et à concentrer leurs visites sur ces dernières, au détriment des plantes trompeuses. Chez les orchidées non autogames, la reproduction est assurée uniquement par les pollinisateurs. L'apprentissage des pollinisateurs a donc un impact négatif sur la reproduction des orchidées trompeuses. Cependant, les caractéristiques d'une espèce trompeuse et des espèces nectarifères au sein d'une communauté végétale peuvent affecter l'apprentissage et le taux de visite des pollinisateurs aux plantes trompeuses. J'ai réalisé des expériences en milieu naturel et en milieu contrôlé, pour déterminer si les caractéristiques florales, spatiales et temporelles des communautés affectent le taux de visite et le succès reproducteur de plantes trompeuses. Une agrégation spatiale élevée des plantes trompeuses et des plantes nectarifères diminue le succès reproducteur des plantes trompeuses. De plus, les pollinisateurs visitent plus souvent l'espèce trompeuse Iorsque ses fleurs sont de couleur similaire à celles de l'espèce nectarifère. Cet effet bénéfique de la similarité pour la couleur des fleurs s'accentue si les deux espèces sont mélangées et proches spatialement, ou si l'espèce trompeuse fleurit après l'espèce nectarifère. Enfin, le comportement des pollinisateurs n'est pas tout de suite affecté lorsque les caractéristiques de la communauté changent. Les caractéristiques des communautés végétales affectent donc la reproduction des espèces trompeuses. Bien que L'absence de coûts associés à la production de nectar, l'exportation efficace de pollen et la production de graines de qualité dont bénéficient les orchidées trompeuses favorisent Ieur maintien, les caractéristiques de la communauté peuvent aussi y contribuer. Mon étude fournit donc une explication alternative et complémentaire au maintien des orchidées trompeuses. Je conclus par une discussion des implications possibles de ces résultats sur le maintien et l'évolution des orchidées trompeuses, en tenant compte de la dynamique des caractéristiques des communautés végétales naturelles. Abstract : Despite the importance of producing food to ensure a high reproductive success, many orchid species lack such rewards. The majority of deceptive orchids simply exploit the instinctive food-foraging behaviour of generalist pollinators. This strategy is termed generalized food deception. To optimize their foraging efficiency, pollinators can learn to discriminate deceptive from rewarding flowers and to focus their visits to the rewarding plants, to the disadvantage of the deceptive plants. Because the reproductive success of non-autogamous orchids entirely relies on pollinator visitation rate, pollinator learning decreases the reproductive success of deceptive orchids. However, the characteristics of deceptive and rewarding plants within a community may affect pollinator learning and visitation rate to a deceptive orchid. Therefore, the biological characteristics of natural plant communities may be crucial to the maintenance of generalized food deceptive orchids. My study focused on the floral, spatial and temporal characteristics of plant communities. I used both in and ex sitar experiments to investigate whether these characteristics influence pollinator visitation rates and the reproductive success of deceptive orchids. A high spatial aggregation of both deceptive and rewarding species decreased the reproductive success of the deceptive species. Also, being of similar flower colour to rewarding sympatric species increased pollinator visitation rates to a deceptive species. The beneficial effect of flower colour similarity was even more pronounced when both species were spatially closely mingled or when the deceptive species flowered after the rewarding species. Finally, pollinator behaviour was unaffected in the short term by a change in the characteristics of plant communities, indicating that pollinators need time to learn under new conditions. Thus, the characteristics of plant communities may crucially affect the reproductive success of deceptive orchids. Although the absence of costs associated with nectar production, the efficient pollen export and the high seed quality of deceptive orchids may favour their maintenance, the characteristics of plant communities may also contribute to it. Therefore, my study provides an alternative yet complementary explanation to the maintenance of generalized food deceptive orchids in natural populations. I discuss the possible implications for the maintenance and the evolution of generalized food deceptive orchids with regards to the floral and temporal dynamics of natural plant communities.

Supplier Evaluation on the Standard Material and Component Markets in the Electronic Manufacturing Equipment Industry

Työn tavoitteena oli arvioida ja selvittää toimittajasuhteeseen vaikuttavia tekijöitä JOT Automation Group Oyj.n ja sen alihankkijoiden välisessä yhteistyössä ja muodostaa yrityksen kilpailukykyä parantava toimittaja-arviointiprosessi. Työssä keskityttiin tarkastelemaan yleisillä materiaali- ja komponenttimarkkinoilla toimivia toimittajia elektroniikkateollisuuden tuotantojärjestelmien valmistuksessa. Ensin tutustuttiin toimittajasuhdetta ja sen arviointia käsitelleeseen kirjallisuuteen. Teorian tueksi tehtiin haastatteluja ja kartoitettiin ensisijaisia tarpeita ja tavoitteita arviointiprosessille. Valmis prosessi testattiin käytännössä kahden eri case-esimerkin avulla. Prosessista muodostui kahteen eri työkaluun jakautunut kokonaisuus, joista auditointi arvioi toimittajan kyvykkyyttä vastatta sille asetettuihin vaatimuksiin. Toimittajan suorituskyvyn mittaaminen puolestaan testaa ja vertaa jatkuvasti toiminnan todellista tasoa auditoinnissa saatuihin tuloksiin. Työ sisältää selvityksen ja ohjeistuksen toimittaja-arviointiprosessin käytöstä. Prosessin käyttö alentaa toimittajaan kohdistuvaa materiaalien saatavuuteen ja hankintaan liittyviä riskejä. Esimerkeistä saadut kokemukset osoittivat, että prosessin avulla päästään pureutumaan tärkeisiin ydinalueisiin ja kehittämään niitä sekä toimittajalle, että ostajayritykselle edullisella tavalla. Toimittaja-arviointiprosessista kehittyy toimintatapa yrityksen ja sen toimittajan välisen suhteen ylläpitämiseksi.

Cross-country data on the quantity of schooling: a selective survey and some quality measures

We survey a number of papers that have focused on the construction of cross-country data sets on average years of schooling. We discuss the construction of the different series, compare their profiles and construct indicators of their information content. The discussion focuses on a sample of OECD countries but we also provide some results for a large non-OECD sample.

Environmental inFluences on the Adoption of Open Innovation: Analysis of Structural, Institutional and Cultural Impacts

The concept of open innovation has recently gained widespread attention, and is particularly relevant now as many firms endeavouring to implement open innovation, face different sets of challenges associated with managing it. Prior research on open innovation has focused on the internal processes dealing with open innovation implementation and the organizational changes, already taking place or yet required in companies order to succeed in the global open innovation market. Despite the intensive research on open innovation, the question of what influences its adoption by companies in different contexts has not received much attention in studies. To fill this gap, this thesis contribute to the discussion on open innovation influencing factors by bringing in the perspective of environmental impacts, i.e. gathering data on possible sources of external influences, classifying them and testing their systemic impact through conceptual system dynamics simulation model. The insights from data collection and conceptualization in modelling are used to answer the question of how the external environment affects the adoption of open innovation. The thesis research is presented through five research papers reflecting the method triangulation based study (conducted at initial stage as case study, later as quantitative analysis and finally as system dynamics simulation). This multitude of methods was used to collect the possible external influence factors and to assess their impact (on positive/negative scale rather than numerical). The results obtained throughout the thesis research bring valuable insights into understanding of open innovation influencing factors inside a firm’s operating environment, point out the balance required in the system for successful open innovation performance and discover the existence of tipping point of open innovation success when driven by market dynamics and structures. The practical implications on how firms and policy-makers can leverage environment for their potential benefits are offered in the conclusions.

Effects of life cycle profits on the profitability of industrial heavy duty cranes

The goal of the thesis was to investigate how much after-sales profits a crane sale generates over the life cycle of the crane and the effects of these after-sales profits on the overall profitability of the crane. The thesis utilizes theories about life cycle costing from an equipment and service supplier’s point of view. However, instead of costs, the thesis is focused on the life cycle after-sales profits from maintenance services and spare parts provided for the sold crane. The case study approach was chosen and a total of five cranes from three different segments were investigated. An eight-step life cycle profit calculation model was developed in order to analyze the chosen cases’ life cycle profits systematically. The results of the investigation suggest that the life cycle after-sales profits are significant in value. In the case analyses they accounted for between 20% and 44% of the overall life cycle profits of the case cranes. The after-sales profits should be taken into account already in the pricing when offering a crane to a customer.

Impacts of increased levels of wind penetration on the Electric Power System of the Åland Islands

The application of VSC-HVDC technology throughout the world has turned out to be an efficient solution regarding a large share of wind power in different power systems. This technology enhances the overall reliability of the grid by utilization of the active and reactive power control schemes which allows to maintain frequency and voltage on busbars of the end-consumers at the required level stated by the network operator. This master’s thesis is focused on the existing and planned wind farms as well as electric power system of the Åland Islands. The goal is to analyze the wind conditions of the islands and appropriately predict a possible production of the existing and planned wind farms with a help of WAsP software program. Further, to investigate the influence of increased wind power it is necessary to develop a simulation model of the electric grid and VSC-HVDC system in PSCAD and examine grid response to different wind power production cases with respect to the grid code requirements and ensure the stability of the power system.

Examining the inclusion experiences of students with intellectual disabilities : a study focusing on the transition from elementary to secondary school

Transitioning from elementary to secondary school is a major event in adolescents' lives and can be associated with academic, social, and emotional challenges (Shaffer, 2005; Sirsch, 2003). Considerably less research has focused on the transitional experiences of students with intellectual disabilities (lD) as they enter secondary school and the role of educational inclusion in this process (Noland, Cason, & Lincoln, 2007). Conceivably, students with ID who leave inclusive elementary schools, where they have been educated alongside their peers without ID, and who enter segregated secondary educational placements may experience unique social and emotional challenges (Farmer, Pearl, & Van Acker, 1996; Fryxell & Kennedy, 1995; Shaffer, 2005). This study examined the transitional experiences of 6 students with ID and the role of educational inclusion, with a focus on elementary to secondary school transitions from inclusive to segregated settings and vice versa. This study included the collection of multiple sources of data. Semi-structured interviews with 6 caregivers and students with ID were conducted. Students' Individual Education Transitional Plans were discussed in caregivers' interviews to determine how they shaped students' educational inclusion experiences (Ontario Ministry of Education & Training, 1999/2000/2004). Parts ofthe following questionnaires were "qualitized" (Tashakkori & Teddlie, 1998) and administered orally: "Youth Self-Report" (YSR; Achenbach, 2001 c) and "Child Behaviour Checklist Caregivers Form" (CBLC/6-18; Achenbach, 200la). The findings of this study contribute to the literature on educational inclusion by highlighting the positive/negative social and emotional impact of congruent and incongruent transitional experiences of students with ID and the role of educational inclusion.