Proteinograma e teores de cobre, ferro e zinco no soro sanguíneo de ovelhas da raça Santa Inês com mastite experimental por Staphylococcus aureus

Costa N.A., Simao L.C.V., Santos R.A., Afonso J.A.B., Fagliari J.J., Cardoso E.C., Soares P.C. & Mendonca C.L. 2010. [Proteinogram and serum concentrations of copper, iron and zinc in Santa Ines ewes with Staphylococcus aureus experimentally induced mastitis.] Proteinograma e teores de cobre, ferro e zinco no soro sanguineo de ovelhas da raca Santa Ines com mastite experimental por Staphylococcus aureus. Pesquisa Veterinaria Brasileira 30(5):435-442. Clinica de Bovinos, Campus Garanhuns, Universidade Federal Rural de Pernambuco (UFRPE), Avenida Bom Pastor s/n, Boa Vista, Caixa Postal 152, Garanhuns, PE 55292-901, Brazil. E-mail: carlalopes.mendonca@gmail.comThe aim of the present study was to evaluate the effect of Staphylococcus aureus experimentally induced mastitis on proteinogram and serum concentrations of cupper, iron and zinc levels of Santa Ines primiparous ewes. The right mammary gland of ten healthy ewes was inoculated with 1,0x10(4) UFC/mL of S. aureus. Clinical examination and determination of serum concentrations of proteins by electrophoresis in polyacrylamide gel (SDS-PAGE), cupper, iron and zinc, as well plasma level of fibrinogen were measured before the inoculation (control) and 12h, 24h, 36h, 48h, 60h, 72h, 84h, 96h, 108h, 120h, 132h, 168h, 180h, 288h and 336h after bacteria inoculation. All animals experimentally infected presented clinical mastitis and subsequent loss of mammary gland function. The electrophoretogram allowed the identification of 23 proteins with molecular weights (MW) ranged from 26.000 to 185.000 daltons (Da) including acute-phase proteins, IgG and IgA. A significant increase (P<0,05) in haptoglobin, ceruloplasmin, IgG and IgA concentrations was observed. Antitrypsin and acid glicoprotein concentrations did not alter. The levels of iron and zinc decreased and the cupper concentration increased. A positive correlation between plasma fibrinogen and serum ceruloplasmin (r=0.74), haptoglobin (r=0.62) and IgA (r=0.62) was also identified. Results showed the importance of ceruloplasmin and haptoglobin as acute-phase proteins in ewes with intramammary infections and confirms fibrinogen as an inflammatory marker because its high correlation with specific proteins. The alterations in the serum levels of Cu, Fe and Zn suggest the action of inflammatory mediators triggered by S. aureus.

Produção de rúcula em hidroponia com diferentes concentrações de cobre

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cobre e zinco no material percolado e no solo com a aplicação de água residuaria de suinocultura em solo cultivado com soja

O objetivo deste trabalho foi avaliar possíveis efeitos da aplicação de taxas de água residuária de suinocultura (ARS), quanto às concentrações de cobre e zinco, tanto no solo quanto na água percolada de lisímetros de drenagem, durante o ciclo da cultura da soja. O experimento foi conduzido em ambiente protegido, onde havia 24 lisímetros de drenagem. Semeou-se soja cultivar CD 202, e foram aplicadas ARS nas seguintes dosagens: 0; 100; 200 e 300 m³ ha-1 no ciclo, combinadas com duas adubações na semeadura (com e sem adição da adubação recomendada na semeadura), em três repetições por tratamento. Foram feitas seis coletas do material percolado durante o ciclo da cultura e realizadas determinações de cobre e zinco. No solo, foram feitas três coletas em cada parcela experimental, para a determinação do pH, da matéria orgânica, da capacidade de troca catiônica, do cobre e do zinco. O delineamento foi em blocos casualizados, num esquema fatorial de 4 x 2. Observou-se que o cobre no solo não apresentou diferenças significativas com a aplicação de ARS e adubação, enquanto as concentrações de zinco no solo foram influenciadas pelas taxas aplicadas de ARS. As transferências de cobre e de zinco por percolação foram pouco expressivas.

Estudo tribológico de biolubrificantes com adição de nanopartículas de óxidos (zinco e cobre)

Currently, vegetable oils have been studied for bio-lubricants base that fits the new environmental standards. Since, in a world full of finite natural resources, mineral oils bring consequences to the environment due to its low biodegradability and toxicity, also it is important to consider that synthetic oils have a high cost The aim of this work is to obtain a biolubricant additived with oxide nanoparticles (ZnO and CuO) for better resistance to friction and wear, which is not toxic to the environment and have better adherence under boundary lubrication. The methodology consisted in the synthesis of bio-lubricants (soybean and sunflower base) by epoxidation reaction. Then, some physical-chemical analysis in bio-lubricants are made to characterize theses lubricants, such as, density, acidity, iodine value, viscosity, viscosity index. Later, the lubricants were additive with nanoparticles. The tribological performance was evaluated by the equipment HFRR (High Frequency Reciprocating Rig) consisting of a wear test ball-plan type. The characterization of wear analysis was performed by SEM / EDS. The results show that bio-lubricants may be synthesized by reaction of epoxidation with good conversion. Tribological point of view, the epoxidized oils are more effective than lubricant additived with the oxide nanoparticles, they had lower coefficients of friction and better rate of film formation in the study. However, because they are environmentally friendly, bio-lubricants gain the relevant importance in tribological field

Remoção do cobre de efluente galvânico aplicando tensoativos derivado de óleos vegetais

Copper is one of the most used metals in platingprocesses of galvanic industries. The presence of copper, a heavy metal, in galvanic effluents is harmful to the environment.The main objective of this researchwas the removal ofcopperfromgalvanic effluents, using for this purpose anionic surfactants. The removal process is based on the interaction between the polar head group of the anionic surfactant and the divalent copper in solution. The surfactants used in this study were derived from soybean oil (OSS), coconut oil (OCS), and sunflower oil (OGS). It was used a copper synthetic solution (280 ppm Cu+2) simulating the rinse water from a copper acid bath of a galvanic industry. It were developed 23and 32 factorial designs to evaluate the parameters that have influence in theremoval process. For each surfactant (OSS, OCS, and OGS), the independent variables evaluated were: surfactant concentration (1.25 to 3.75 g/L), pH (5 to 9) and the presence of an anionic polymer (0 to 0.0125 g/L).From the results obtained in the 23 factorial design and in the calculus for estimatingthe stoichiometric relationship between surfactants and copper in solution, it were developed new experimental tests, varying surfactant concentration in the range of 1.25 to 6.8 g/L (32 factorial design).The results obtained in the experimental designs were subjected to statistical evaluations to obtain Pareto charts and mathematical modelsfor Copper removal efficiency (%). The statistical evaluation of the 23 and 32factorial designs, using saponifiedcoconut oil (OCS), presented the mathematical model that best described the copper removal process.It can be concluded that OCS was the most efficient anionic surfactant, removing 100% of the copper present in the synthetic galvanic solution

Utilização De Polímeros à Base De Acrilamida Na Remoção De Cobre De Meio Aquoso

Environmental Laws and Regulations to dump wastewater are increasingly relevant and, together with pressure from environmentalists, provide awareness of academics in search of solutions. In Brazil, federal law, through Resolution No. 357 of 17/03/05 of the National Environmental Council - CONAMA, in Article 24 deals with the disposal of these effluents. Water pollution with heavy metals is concern because of the difficulty of the treatment and removal from the environment. Copper, for example, is a metallic element and in the form of salt is very soluble in water which dificults its removal. In this context, this study aims to evaluate the extraction of copper with acrylamide polymers through the process of assisted flocculation followed by filtration. Therefore, we used acrylamide polymers, produced by SNF Floerger, with varying degrees of ionicity which is the parameter examined on the extraction of copper. We used the FA polymers FA 920 SH, AH 912 SH, AN 905 SH, AN 910 SH, AN 923 SH, AN 945 SH, AN 956 SH and AN 977 SH, which have anionicities different from each other and growing in that order. The parameters temperature, pH, concentration of the copper solution and stirring speed are fixed. The polymer solution was added to a solution of 200 ppm copper, varying the concentration of polymer. After stirring, an assisted flocculation occurred followed by filtration of the effluent. The filtrate was analyzed by atomic absorption spectrophotometer and the percentage removal of copper ranged from 63 % to 97 %, noting that polymers with higher ionic charge were responsible for the highest percentage of copper extraction. The results of this study showed that these polymers can be applied in the treatment of wastewaters containing metals such as copper

Complexos metálicos de cobalto, níquel e cobre com a Pirazina-2-carboxamida e 4- hidrazida ácida piridincarboxílica: síntese e caracterização

This work involved the synthesis, characterization and proposing the molecular structure of coordination compounds involving ligands pyrazine-2-carboxamide (PZA) and 4- hydrazide acidic pyridine carboxylic (INH) and metals of the first transition series (M = Co2+, Ni2+ and Cu2+). For the characterization of the compounds used were analytical techniques such as infrared absorption spectroscopy average (FT-IR) molar conductivity measurements, CHN elemental analysis, EDTA Complexometric, measurement of melting point, X-ray diffraction by powder method, Thermogravimetry (TG) and Differential Thermal Analysis (DTA) and Simultaneous Differential Scanning Calorimetry (DSC). The absorption spectra in the infrared region suggested that the ligand coordination to the metal center occurs through the carbonyl oxygen atom and nitrogen alpha pyrazine ring to those complexes formed with PZA. For INH complexes with metal-ligand coordination is through the carbonyl oxygen and nitrogen of the terminal hydrazide grouping. The conductivity measurements of the complexes in aqueous solution they suggest to all behavior of the type 1:2 electrolytes, and conduct of non-electrolytes in acetonitrile. The results obtained by CHN elemental analysis and EDTA Complexometric allowed to infer the stoichiometry of the compounds synthesized. For all of the complexes obtained was possible to record the melting points, neither of which melted near the melting temperature of the free ligands. The X-ray diffraction showed that the complexes of pyrazinamide exhibited diffraction lines, suggesting that these compounds are crystalline, while compounds of isoniazid, with the exception of cobalt, exhibited diffraction lines, indicating that they are crystalline. The results from the TG-DTA and DSC allowed information regarding the dehydration and thermal decomposition of these complexes

Otimização da síntese de nanoferritas de nizn dopada com cobre e cobalto

Different compositions of Ni0,5-xCuxZn0,5Fe2O4 and Ni0,5-xCoxZn0,5Fe2O4 0 ≤ x ≤ 0.3 were synthesized ferrite y the citrate precursor method. The stoichiometric compositions were calcined in air at 350°C and then pressed into pellets and toroids. The pressed samples were sintered at temperatures of 1000, 1050 and 1100°C/3h in air control at the speed of heating and cooling. The calcined powders were characterized by XRD, TGA / DTG, FTIR, SEM and vibrating sample magnetometry (VSM) and the sintered samples by XRD, SEM, MAV, density and measurements of permeability and magnetic losses. There was pure phase formation ferrimagnetism applied at all temperatures except for A-I composition at all sintering temperatures and A-II only at a temperature of 1100°C. Crystallite sizes were obtained by Rietveld analysis, nanometer size from 11 to 20 nm for the calcined powders. For SEM, the sintered samples showed grain size between 1 and 10 micrometers. Bulk density (ρ) of sintered material presented to the Families almost linear behavior with increasing temperature and a tendency to decrease with increasing concentration of copper, different behavior of the B Family, where the increase in temperature decreased the density. The magnetic measurements revealed the powder characteristics of a soft ferrimagnetic material. Two processes of magnetization were considered, the superparamagnetism at low temperatures (350°C) and the formation of magnetic domains at higher temperatures. Obtaining the best parameters for P and B-II magnetic ferrites at high temperatures. The sintered material at 1000°C showed a relative permeability (μ) from 50 to 800 for the A Family and from 10 to 600 for the B Family. The samples sintered at 1100°C, B Family showed a variation from 10 to 1000 and the magnetic loss (tan δ) of A and B Families, around of 1. The frequency response of the toroidal core is in the range of 0.3 kHz. Several factors contribute to the behavior of microstructure considering the quantities μ and tan δ, such as the grain size, inter-and intragranular porosity, amount of grain boundary and the aspects of the dynamics of domain walls at high frequencies.

Eficiência de extração de cobre e níquel utilizando sistemas microemulsionados bifásicos e trifásicos

The environmental impact due to the improper disposal of metal-bearing industrial effluents imposes the need of wastewater treatment, since heavy metals are nonbiodegradable and hazardous substances that may cause undesirable effects to humans and the environment. The use of microemulsion systems for the extraction of metal ions from wastewaters is effective when it occurs in a Winsor II (WII) domain, where a microemulsion phase is in equilibrium with an aqueous phase in excess. However, the microemulsion phase formed in this system has a higher amount of active matter when compared to a WIII system (microemulsion in equilibrium with aqueous and oil phases both in excess). This was the reason to develop a comparative study to evaluate the efficiency of two-phases and three-phases microemulsion systems (WII and WIII) in the extraction of Cu+2 and Ni+2 from aqueous solutions. The systems were composed by: saponified coconut oil (SCO) as surfactant, n-Butanol as cosurfactant, kerosene as oil phase, and synthetic solutions of CuSO4.5H2O and NiSO4.6H2O, with 2 wt.% NaCl, as aqueous phase. Pseudoternary phase diagrams were obtained and the systems were characterized by using surface tension measurements, particle size determination and scanning electron microscopy (SEM). The concentrations of metal ions before and after extraction were determined by atomic absorption spectrometry. The extraction study of Cu+2 and Ni+2 in the WIII domain contributed to a better understanding of microemulsion extraction, elucidating the various behaviors presented in the literature for these systems. Furthermore, since WIII systems presented high extraction efficiencies, similar to the ones presented by Winsor II systems, they represented an economic and technological advantage in heavy metal extraction due to a small amount of surfactant and cosurfactant used in the process and also due to the formation of a reduced volume of aqueous phase, with high concentration of metal. Considering the reextraction process, it was observed that WIII system is more effective because it is performed in the oil phase, unlike reextraction in WII, which is performed in the aqueous phase. The presence of the metalsurfactant complex in the oil phase makes possible to regenerate only the surfactant present in the organic phase, and not all the surfactant in the process, as in WII system. This fact allows the reuse of the microemulsion phase in a new extraction process, reducing the costs with surfactant regeneration

Correlação entre a atividade sérica da ceruloplasmina e os teores sérico e hepático de cobre em novilhas Nelore

Avaliou-se a atividade oxidativa sérica da ceruloplasmina como indicadora dos teores sérico e hepático de cobre e compararam-se dois métodos de determinação da ceruloplasmina, pelo parafenileno e pela ortodianisidina. Foram colhidas 56 amostras de soro e de fígado (biópsias hepáticas) de novilhas Nelore para determinação da atividade sérica da ceruloplasmina e da concentração de cobre. As correlações entre a concentração sérica de cobre e a atividade sérica da ceruloplasmina determinadas pelos métodos do parafemileno e da ortodianisidina foram 0,75 e 0,62, respectivamente. As correlações entre a concentração hepática de cobre e a atividade sérica da ceruloplasmina pelos métodos citados foram 0,15 e 0,12. Não foi observada correlação entre os valores séricos e hepáticos de cobre. A correlação entre determinação da atividade sérica de ceruloplasmina, que utilizou o parafenileno como substrato, e o cobre sérico foi maior do que a correlação entre esse mineral e o método que usou a ortodianisidina.

Fontes orgânicas e inorgânicas de zinco e cobre como melhoradores de desempenho em leitões desmamados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito do cobre na atividade da enzima pirogalol peroxidase em plantas de Myriophyllum aquaticum cultivadas em solução nutritiva

Myriophyllum aquaticum é uma planta perene, herbácea, que pode se desenvolver totalmente submersa ou com a porção terminal dos ramos acima da superfície da água. É também considerada uma planta daninha que possui elevado potencial de colonização, o qual, dependendo da densidade populacional, pode causar aumento no teor de matéria orgânica e redução de oxigênio na água, comprometendo a qualidade da água e seus usos múltiplos. O objetivo do presente trabalho foi verificar a influência do cobre na atividade da pirogalol peroxidase de plantas de M. aquaticum submetidas à solução nutritiva contendo concentrações de cobre de 1,2; 11,2; 21,2; 31,2; e 41,2 µg L-1. O experimento foi conduzido em um delineamento experimental inteiramente casualizado, com quatro repetições e cinco tratamentos, aos quais as plantas foram submetidas durante 21 dias. Aos 81 dias após a instalação das mudas em solução nutritiva contendo os diferentes níveis de cobre, as folhas foram colhidas a partir do ápice da planta até o final do ramo, que não estavam em contato com a solução. Esse material fresco foi envolvido por plástico transparente e papel-alumínio e, a seguir, congelado em nitrogênio líquido, sendo armazenado em freezer a -20 ºC até o momento da determinação da atividade da enzima pirogalol peroxidase. A atividade da enzima foi progressiva com o aumento das doses de cobre. As plantas cultivadas com 40 µg L-1 de Cu2+ após três semanas, com base em avaliação visual, apresentaram redução no desenvolvimento.

Fracionamento de cobre em proteínas do plasma, músculo e fígado de tilápia do Nilo

Copper fractionation in plasma, muscle and liver of Nile tilapia was performed after protein separation by 2D-PAGE. SR XRF analysis indicated the presence of copper in three protein spots of plasma, and in two protein spots of muscle and liver, respectively. Copper ions were found to be distributed mostly in proteins that had a molar mass of less than 54 kDa and greater than 13 kDa and a pI in the 5.3-9.3 range. The copper concentration bound to these proteins was determined by GFAAS which showed concentrations in the 1.20-4.82 mg g-1 range.

Deposição eletrolítica catódica e anódica simultâneas para minimizar interferências de cobre e chumbo na determinação espectrofotométrica de cádmio em água e alimentos via reação com Verde de Malaquita e iodeto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudos sobre a nutrição mineral do cafeeiro: XXXI. influêcia do cobre do substrato no crescimento e composição mineral do cafeeiro (Coffea arabica L.) variedades Mundo Novo e Catuaí

Foi estudado o efeito do cobre do substrato no crescimento, sintomatologia e composição mineral do cafeeiro novo. Verificou-se ser a var. Mundo Novo mais sensível à toxidez do cobre por translocar maior proporção do elemento que a var. Catuaí. O uso de calcário e de matéria orgânica no solo neutraliza o sobre tóxico.