Assistência de ar em pulverização no manejo fitossanitário na cultura da soja Glycine max (L.) Merrill

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of Fungicides and Plant Populations on Soybean Disease and Yield

Applications of foliar fungicides on soybeans have been shown to reduce disease pressure and protect yield under the right conditions, especially in environments that have very wet or humid conditions. In the past decade, fungicide use in Iowa has increased. Initially, growers were concerned with the potential threat of soybean rust, which is controlled effectively by foliar fungicides. In Iowa, however, there has not been any case of yield reduction due to soybean rust. New potential purposes for foliar fungicides include “plant health” benefits and the reduction of foliar diseases endemic in Iowa such as Septoria brown spot, Cercospora leaf blight, and frogeye leaf spot. Currently what is not known is how the efficacy of fungicides is affected when agricultural practices change. Our question: How does plant population affect the efficacy of fungicides?

Preservation of Phakopsora pachyrhizi uredospores

This study compared different temperatures and dormancy-reversion procedures for preservation of Phakopsora pachyrhizi uredospores. The storage temperatures tested were room temperature, 5 degrees C, -20 degrees C and -80 degrees C. Dehydrated and non-dehydrated uredospores were used, and evaluations for germination (%) and infectivity (no. of lesions/cm(2)) were made with fresh harvested spores and after 15, 29 76, 154 and 231 days of storage. The dormancy-reversion procedures evaluated were thermal shock (40 degrees C/5 min) followed or not by hydration (moist chamber,24 h). Uredospores stored at room temperature were viable only up to a month of storage, regardless of their hydration condition. Survival of uredospores increased with storage at lower temperatures. Dehydration of uredospores prior to storage increased their viability, mainly for uredospores stored at 5 degrees C, -20 degrees C and -80 degrees C. At 5 degrees C and -20 degrees C, dehydrated uredospores showed increases in viability of at least 47 and 127 days, respectively, compared to non-dehydrated spores. Uredospore germination and infectivity after storage for 231 days (7.7 months), could only be observed at -80 degrees C, for both hydration conditions. At this storage temperature, dehydrated and non-dehydrated uredospores exhibited 56 and 28% of germination at the end of the experiment, respectively. Storage at -80 degrees C also maintained uredospore infectivity, based upon levels of Infection frequency, for both hydration conditions. Among the dormancy-reversion treatments applied to spores stored at -80 degrees C, those involving hydration allowed recoveries of 85 to 92% of the initial germination.

In vivo sensitivity of Phakopsora pachyrhizi to DMI and QoI fungicides

In in vivoexperiments the sensitivity of 18 isolates of Phakopsora pachyrhizifrom several regions of Brazil to IDM fungicides (cyproconazole, epoxiconazole and tebuconazole and an IQE (pyraclostrobin) were evaluated. The assessments were based on leaflet uredia density. Inhibitory concentration (IC50) and sensitivity reduction factor were determined for all fungicide x strain interactions. Tebuconazole sensitivity reduction was detected for most fungus isolates. In contrast, there was no fungicide shift in sensitivity of the fungus to pyraclostrobin. We conclude that the control failure of soybean rust found in some farms is due to the reduced sensitivity of the fungus to the IDM fungicide and that it remains sensitive to pyraclostrobin.

Velocidade do ar em barra de pulverização na deposição da calda fungicida, severidade da ferrugem asiática e produtividade da soja

O trabalho objetivou comparar a deposição da pulverização e o controle da ferrugem asiática após o tratamento com fungicidas sob quatro velocidades da assistência de ar junto à barra de pulverização na cultura da soja. Dois experimentos foram conduzidos na FCA/UNESP - Campus de Botucatu, safra 2006/07. Alvos artificiais foram fixados na superfície adaxial e abaxial de folíolos posicionados nas partes superior e inferior das plantas selecionadas e distribuídas perpendicularmente ao deslocamento do pulverizador. O oxicloreto de cobre (50% de cobre metálico) foi o marcador utilizado em pulverização e a determinação quantitativa dos depósitos feita com o uso de espectrofotometria de absorção atômica. Após a aplicação do fungicida piraclostrobina + epoxiconazole sob diferentes velocidades da assistência de ar junto à barra de pulverização (0, 9, 11 e 29 km h-1) procedeu-se a avaliação da severidade da doença e produtividade da soja. Na parte superior das plantas os maiores níveis de depósitos foram encontrados na pulverização sem assistência de ar. Já na parte inferior da planta foram encontrados os maiores níveis de deposição quando foram utilizadas as maiores velocidades da assistência de ar. No geral, a severidade da doença foi mais acentuada nos tratamentos sem o uso da assistência de ar. em relação à produtividade não houve diferenças entre os tratamentos com aplicação de fungicidas, porém houve incremento na produtividade para os tratamentos com assistência de ar.

Assistência de ar em barra de pulverização no controle da ferrugem asiática da soja

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

População de plantas, ferrugem asiática e produção de soja

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Adjuvantes e assistência de ar junto à barra de pulverização no controle da deriva e da ferrugem da soja (Phakopsora pachyrhizi)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo genético e influência de caracteres na seleção de genótipos superiores de soja

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Eficiência de volumes e pontas de pulverização centrífuga e hidráulica na distribuição e deposição da calda no controle da ferrugem asiática da soja

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Desempenho de adjuvantes na qualidade da aplicação e na retenção e translocação de fungicida na cultura da soja

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Selection strategies of segregant soybean populations for resistance to Asian rust

The objective of this work was to identify the best selection strategies for the more promising parental combinations to obtain lines with good resistance to soybean Asian rust (Phakopsora pachyrhizi). Two experiments were carried out in the field during the 2006/2007 and 2007/2008 growing seasons, to determine the percentage of infected leaf area of individual plants of five parents and their segregant F2 and F3 populations. The data obtained indicates that additive genetic variance predominates in the control of soybean resistance to Asian rust, and that the year and time of assessment do not significantly influence the estimates of the genetic parameters obtained. The narrow-sense heritability (h²r) ranged from 23.12 to 55.83%, and indicates the possibility of successful selection of resistant individuals in the early generations of the breeding program. All the procedures used to select the most promising populations to generate superior inbred lines for resistance to P. pachyrhizi presented similar results and identified the BR01-18437 x BRS 232 population as the best for inbred line selection.

Effect of nozzle angle and air-jet parameters in air-assisted sprayer on biological effect of soybean asian rust chemical protection

Aiming at improving the efficiency control of Phakopsora pachyrhizi, this research evaluated different application techniques, using spray deposits and yield parameters of soybean crop. Two experiments were carried out in the experimental area of FCA/UNESP - Botucatu, SP, Brazil, in the soybean crop, Conquista variety, in the 2006/2007 season. The first experiment was arranged in random blocks with eight treatments and four replications. The treatments were conducted in factorial arrangement 4×2 (four air levels 0, 9, 11 and 29 km/h combined at two nozzle angles 0 and 30°) using AXI 110015 nozzles. Ten plants on each plot were selected for sampling spray deposits. Artificial targets were fixed on plants, two in the top and another two in the bottom part of plants (abaxial and adaxial leaf surface each one). For deposit evaluations, a cupric tracer was used and the amount of deposits was determined by a spectrophotometer. The second experiment was carried out in the same place and the treatments were of the same arrangement as the previous experiment, including control treatment (untreated plants). The spraying with triazole fungicide was realized in R2 and R5.2 growth stages of soybean with 142 l/ha spray volume. The nozzle angled of 30° combined with maximum air speed promoted the highest spray deposits on the soybean crop and influenced positively the control of the soybean Asian rust as well in the productivity of this crop.

Air-assistance and low volume application to control of asian rust on soybean crop

Currently, one of factors that cause the production cost increase of soybean crop is the pesticide application. The most important disease in soybean crop is Asian rust, caused by Phakopsora pachyrhizi Sydon & P. Sydon fungus, which can cause significant loss of the production. Therefore, this work aimed at evaluation of different spraying techniques on the spray deposits and some parameters of soybean crop: grain size, weight of 1 000 seeds and the crop productivity. Two experiments were carried out in the experimental area of FCA/UNESP (Faculdade de Ciencias Agronomicas/Universidade Estadual Paulista Julio de Mesquita Filho) - Botucatu, S P, Brazil, in soybean crop, Conquista variety, in the 2007/2008 season. In the first experiment, three air levels (0, 9 and 29 km/h of the air speed generated by fan) with flat fan nozzle XR 8002 with a spray volume of 130 l/ha were compared with a rotating nozzle - using low volume oily - LVO at 40 l/ha of spray volume. The second experiment was carried out under the same conditions as the previous experiment, including a control treatment (untreated plants). The disease severity was evaluated using a diagrammatic scale with a visual evaluation of the disease on 15 leaves of each plot. The grades varied between 0.6 and 78.5% of the disease severity. The use of air assistance when compared with the rotating system nozzle did not show significant differences for spray deposits on adaxial and abaxial surface of the leaves in bottom part of the plant. The air assistance with maximum air speed (29 km/h) increased the productivity with respect of the other treatments.

Diversidade genética com base em dados fenotípicos avaliada em diferentes populações e linhagens avançadas de soja

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV