Biotribological assessment for artificial synovial joints : the role of boundary lubrication

Biotribology, the study of lubrication, wear and friction within the body, has become a topic of high importance in recent times as we continue to encounter debilitating diseases and trauma that destroy function of the joints. A highly successful surgical procedure to replace the joint with an artificial equivalent alleviates dysfunction and pain. However, the wear of the bearing surfaces in prosthetic joints is a significant clinical problem and more patients are surviving longer than the life expectancy of the joint replacement. Revision surgery is associated with increased morbidity and mortality and has a far less successful outcome than primary joint replacement. As such, it is essential to ensure that everything possible is done to limit the rate of revision surgery. Past experience indicates that the survival rate of the implant will be influenced by many parameters, of primary importance, the material properties of the implant, the composition of the synovial fluid and the method of lubrication. In prosthetic joints, effective boundary lubrication is known to take place. The interaction of the boundary lubricant and the bearing material is of utmost importance. The identity of the vital active ingredient within synovial fluid (SF) to which we owe the near frictionless performance of our articulating joints has been the quest of researchers for many years. Once identified, tribo tests can determine what materials and more importantly what surfaces this fraction of SF can function most optimally with. Surface-Active Phospholipids (SAPL) have been implicated as the body’s natural load bearing lubricant. Studies in this thesis are the first to fully characterise the adsorbed SAPL detected on the surface of retrieved prostheses and the first to verify the presence of SAPL on knee prostheses. Rinsings from the bearing surfaces of both hip and knee prostheses removed from revision operations were analysed using High Performance Liquid Chromatography (HPLC) to determine the presence and profile of SAPL. Several common prosthetic materials along with a novel biomaterial were investigated to determine their tribological interaction with various SAPLs. A pin-on-flat tribometer was used to make comparative friction measurements between the various tribo-pairs. A novel material, Pyrolytic Carbon (PyC) was screened as a potential candidate as a load bearing prosthetic material. Friction measurements were also performed on explanted prostheses. SAPL was detected on all retrieved implant bearing surfaces. As a result of the study eight different species of phosphatidylcholines were identified. The relative concentrations of each species were also determined indicating that the unsaturated species are dominant. Initial tribo tests employed a saturated phosphatidylcholine (SPC) and the subsequent tests adopted the addition of the newly identified major constituents of SAPL, unsaturated phosphatidylcholine (USPC), as the test lubricant. All tribo tests showed a dramatic reduction in friction when synthetic SAPL was used as the lubricant under boundary lubrication conditions. Some tribopairs showed more of an affinity to SAPL than others. PyC performed superior to the other prosthetic materials. Friction measurements with explanted prostheses verified the presence and performance of SAPL. SAPL, in particular phosphatidylcholine, plays an essential role in the lubrication of prosthetic joints. Of particular interest was the ability of SAPLs to reduce friction and ultimately wear of the bearing materials. The identification and knowledge of the lubricating constituents of SF is invaluable for not only the future development of artificial joints but also in developing effective cures for several disease processes where lubrication may play a role. The tribological interaction of the various tribo-pairs and SAPL is extremely favourable in the context of reducing friction at the bearing interface. PyC is highly recommended as a future candidate material for use in load bearing prosthetic joints considering its impressive tribological performance.

Prognostic modelling options for remaining useful life estimation by industry

Over recent years a significant amount of research has been undertaken to develop prognostic models that can be used to predict the remaining useful life of engineering assets. Implementations by industry have only had limited success. By design, models are subject to specific assumptions and approximations, some of which are mathematical, while others relate to practical implementation issues such as the amount of data required to validate and verify a proposed model. Therefore, appropriate model selection for successful practical implementation requires not only a mathematical understanding of each model type, but also an appreciation of how a particular business intends to utilise a model and its outputs. This paper discusses business issues that need to be considered when selecting an appropriate modelling approach for trial. It also presents classification tables and process flow diagrams to assist industry and research personnel select appropriate prognostic models for predicting the remaining useful life of engineering assets within their specific business environment. The paper then explores the strengths and weaknesses of the main prognostics model classes to establish what makes them better suited to certain applications than to others and summarises how each have been applied to engineering prognostics. Consequently, this paper should provide a starting point for young researchers first considering options for remaining useful life prediction. The models described in this paper are Knowledge-based (expert and fuzzy), Life expectancy (stochastic and statistical), Artificial Neural Networks, and Physical models.

Me and my body : the relevance of the difference for the distinction between withdrawing life support and euthanasia

In this paper I discuss David Shaw’s claim that the body of a terminally ill person can be conceived as a kind of life-support, akin to an artificial ventilator. I claim that this position rests upon an untenable dualism between the mind and the body. Given that dualism continues to be attractive to some thinkers, I attempt to diagnose the reasons why it continues to be attractive, as well as to demonstrate its incoherence, drawing on some recent work in the philosophy of psychology. I conclude that, if my criticisms are sound, Shaw’s attempt to deny the distinction between withdrawal and euthanasia fails.

Determining process model precision and generalization with weighted artificial negative events

Process mining encompasses the research area which is concerned with knowledge discovery from event logs. One common process mining task focuses on conformance checking, comparing discovered or designed process models with actual real-life behavior as captured in event logs in order to assess the “goodness” of the process model. This paper introduces a novel conformance checking method to measure how well a process model performs in terms of precision and generalization with respect to the actual executions of a process as recorded in an event log. Our approach differs from related work in the sense that we apply the concept of so-called weighted artificial negative events towards conformance checking, leading to more robust results, especially when dealing with less complete event logs that only contain a subset of all possible process execution behavior. In addition, our technique offers a novel way to estimate a process model’s ability to generalize. Existing literature has focused mainly on the fitness (recall) and precision (appropriateness) of process models, whereas generalization has been much more difficult to estimate. The described algorithms are implemented in a number of ProM plugins, and a Petri net conformance checking tool was developed to inspect process model conformance in a visual manner.

Feeling the life : a look into the visual culture of life scientists

In order to deal with human biological problems, life scientists have started investigating artificial ways of generating tissues and growing cells ? leading to the evolution of tissue engineering. In this paper we explore visualization practices of life scientists working within the domain of tissue engineering. We carried out a small scale ethnographic exploration with 8 scientists and explored that the real value of scientists' experiments (and simulations), reasoning and collaborative processes go beyond their end results. We observed that these scientists' three-dimensional reasoning, corporeal knowledge and intimacy with biological objects and tools play a vital role in overall success.

Collation, analysis and research of thermal benefits of green life in the urban landscapes

This project reviewed international research conducted on the possible role of plants in alleviating high temperatures in our living spaces. The literature review served to identify the work that has already been carried out in the area and to highlight the gaps to be filled by experimental research. A pilot study then investigated the thermal properties of six of the most common landscaping materials. This project clearly shows that plants can play a significant role in modifying the thermal conditions of urban environments. Tall trees can shade nearby buildings and allow for reductions in cooling costs. In addition to basic shading, the dispersal of heat via the plant’s natural transpiration stream has long been recognised as an important component of the urban energy balance. It has been shown that urban temperatures can be up to 7°C higher than nearby rural areas, illustrating the impact of plants on their environment. These benefits argue against the idea of removing plants from landscapes in order to save on water in times of drought. Similarly, the idea of switching to artificial turf is questionable, since artificial turf still requires watering and can reach temperatures that far exceed the safe range for players. While vegetation offers evaporative cooling, non-vegetative, impervious surfaces such as concrete do not, and can therefore cause greater surface and soil temperatures. In addition, the higher temperatures associated with these impervious surfaces can negatively affect the growth of plants in surrounding areas. Permeable surfaces, such as mulches, have better insulating properties and can prevent excessive heating of the soil. However, they can also lead to an increase in reflected longwave radiation, causing the leaves of plants to close their water-conducting pores and reducing the beneficial cooling effects of transpiration. The results show that the energy balance of our surroundings is complicated and that all components of a landscape will have an impact on thermal conditions.

Application of artificial intelligence for the assessment of the status of power transformers

The Dissolved Gas Analysis (DGA) a non destructive test procedure, has been in vogue for a long time now, for assessing the status of power and related transformers in service. An early indication of likely internal faults that may exist in Transformers has been seen to be revealed, to a reasonable degree of accuracy by the DGA. The data acquisition and subsequent analysis needs an expert in the concerned area to accurately assess the condition of the equipment. Since the presence of the expert is not always guaranteed, it is incumbent on the part of the power utilities to requisition a well planned and reliable artificial expert system to replace, at least in part, an expert. This paper presents the application of Ordered Ant Mner (OAM) classifier for the prediction of involved fault. Secondly, the paper also attempts to estimate the remaining life of the power transformer as an extension to the elapsed life estimation method suggested in the literature.

Artificial fertilization of the eggs, and rearing and identification of the larvae of the anchoveta, Cetengraulis mysticetus

ENGLISH: The anchoveta, Cetengraulis mysticetus (Günther), is an important bait fish used to capture tunas in the Eastern Tropical Pacific Ocean. Contributions to the early life history of this species in the Gulf of Panama were made by Simpson (1959), who was able to identify deductively the planktonic egg of the anchoveta from 10 other anchovy eggs concurrently present. He also reared these planktonic eggs in the laboratory and described the resultant larvae to the age of 48 hours after hatching. Because of the lack of differences among the anchovy larvae, this description does not permit the identification of anchoveta larvae from those of other engraulid species. Furthermore, while adult specimens are easily recognized, up to the present it has not been possible to extend the identification of the juvenile anchoveta to specimens smaller than about 25 mm. The purpose of this study, therefore, was to identify anchoveta from the time of hatching to about 25 mm. SPANISH: La anchoveta, Cetengraulis mysticetus (Günther), es un importante pez de carnada que se emplea en la captura de los atunes en el Océano Pacífico Oriental Tropical. Simpson (1959) logró identificar deductivamente el huevo planctónico de la anchoveta al separarlo de otros diez huevos de anchoas que se encuentran al mismo tiempo, contribuyendo de esta manera a conocer los primeros estados de la historia natural de esta especie en el Golfo de Panamá. El también estableció un criadero en el laboratorio con estos huevos planctónicos y describió las larvas resultantes hasta la edad de 48 horas después de la eclosión. Debido a que no hay diferencias entre las larvas de las anchoas, esta descripción no permite identificar las larvas de la anchoveta de las otras especies de engráulidos. Más aun, a pesar de que los especímenes adultos son fácilmente reconocibles, hasta ahora no ha sido posible identificar la anchoveta juvenil de menos de unos 25 mm. Consecuentemente, el propósito del presente estudio ha sido el de identificar al anchoveta desde el momento de la eclosión hasta que tiene unos 25 mm.

Microbiological evaluation and keeping quality of fishes reared in livestock sewage fed ponds without artificial feed

Livestock sewage has been utilized for fish culture. There is lack of information on microbiological evaluation and keeping quality of these fishes. This paper reveals the incidence, types of micro-organisms and keeping quality of fishes reared in livestock sewage fed ponds without artificial feed. These fishes revealed microbial incidence and keeping quality comparable to other fishes. Initial mesophilic and psychrophilic counts varied from 3.38 to 5.56 and 2.47 to 4.74. On an average, the counts reduced by about 40% after evisceration and washing. Whole as well as washed fishes had refrigerated (8 ± 1°C) life of not more than 4 days. The average psychrophilic and mesophilic counts of ice (0 to 1°C) stored whole fishes up to 10th day varied from 3.66 to 4.81, 4.61 to 5.24 and in eviscerated and washed fishes 2.17 to 3.69 and 2.78 to 4.41. Both remained acceptable till the 10th day. Qualitative study of surface slime and gills revealed presence of Aerobacter (Enterobacter), Aeromonas, Alcaligenes, Bacillus, Clostridia, E. coli, Klebsiella, Micrococci, Proteus and Pseudomonas.

Two unisexual artificial polyploid clones constructed by genome addition of common carp (Cyprinus carp) and crucian carp (Carassius auratus)

A polyploid hybrid fish with natural gynogenesis can prevent segregation and maintain their hybrid vigor in their progenies. Supposing the reproduction mode of induced polyploid fish being natural gynogenesis, allopolyploid hybrid between common carp and crucian carp into allopolyploid was performed. The purpose of this paper is to describe a lineage from sexual diploid carp transforming into allotriploid and allotetraploid unisexual clones by genome addition. The diploid hybrid between common carp and crucian carp reproduces an unreduced nucleus consisting of two parental genomes. This unreduced female pronucleus will fuse with male pronucleus and form allotriploid zygote after penetration of related species sperms. Allotriploid embryos grow normally, and part of female allotriploid can produce unreduced mature ova with three genomes. Mature ova of most allotriploid females are provided with natural gynogenetic trait and their nuclei do not fuse with any entrance sperm. All female offspring are produced by gynogenesis of allotriploid egg under activation of penetrating sperms. These offspring maintain morphological traits of their allotriploid maternal and form an allotetraploid unisexual clone by gynogenetic reproduction mode. However, female nuclei of rare allotriploid female can fuse with penetrating male pronuclei and result in the appearance of allotetraploid individuals by means of genome addition. All allotetraploid females can reproduce unreduced mature eggs containing four genomes. Therefore, mature eggs of allotetraploid maintain gynogenetic trait and allotetraploid unisexual clone is produced under activation of related species sperms.

Life history cycles of flatfish species in the Bohai Sea, China

This paper provides basic information on the general ecology and life history cycles of various flatfish species in the Bohai Sea, China. The species studied are Paralichthys olivaceus (Temminck & Schlegel), Cleisthenes herzensteini (Schmidt), Eopsetta grigorjewi (Herzenstein), Verasper variegatus (Temminck & Schlegel), Pleuronichthys cornutus (Temminck & Schlegel), Pseudopleuronectes yokohamae (Gunther), Pseudopleuronectes herzensteini (Jordan & Snyder), Kareius bicoloratus (Basilewsky), Zebrias zebra (Bloch), Cynoglossus semilaevis Gunther, Cynoglossus abbreviatus (Gray) and Cynoglossus joyneri Gunther. Information on reproduction, eggs and larval distribution, growth and adult abundance is presented. Based on the biology and ecology of these flatfish, artificial enhancement of the commercial species in the Bohai Sea is discussed.

Endocrine Inspired Modulation of Artificial Neural Networks for Mobile Robotics

Sauze, C and Neal, M. 'Endocrine Inspired Modulation of Artificial Neural Networks for Mobile Robotics', Dynamics of Learning Behavior and Neuromodulation Workshop, European Conference on Artifical Life 2007, Lisbon, Portugal, September 10th-14th 2007.

Guidelines on artificial nutrition versus hydration in terminal cancer patients

Whether a terminally ill cancer patient should be actively fed or simply hydrated through subcutaneous or intravenous infusion of isotonic fluids is a matter of ongoing controversy among clinicians involved in the care of these patients. Under the auspices of the European Association for Palliative Care, a committee of experts developed guidelines to help clinicians make a reasonable decision on what type of nutritional support should be provided on a case-by-case basis. It was acknowledged that part of the controversy related to the definition of the terminal cancer patient, since this is a heterogeneous group of patients with different needs, expectations, and potential for a medical intervention. A major difficulty is the prediction of life expectancy and the patient's likely response to vigorous nutritional support. In an attempt to reach a decision on the type of treatment support (artificial nutrition vs. hydration) which would best meet the needs and expectations of the patient, we propose a three-step process: Step I: define the eight key elements necessary to reach a decision: Step II: make the decision; and Step III: reevaluate the patient and the proposed treatment at specified intervals. Step I involves assessing the patient concerning the following: 1) oncological/clinical condition; 2) symptoms; 3) expected length of survival; 4) hydration and nutritional status; 5) spontaneous or voluntary nutrient intake; 6) psychological profile; 7) gut function and potential route of administration; and 8) need for special services based on type of nutritional support prescribed. Step II involves the overall assessment of pros and cons, based on information determined in Step I, in order to reach an appropriate decision based on a well-defined end point (i.e. improvement of quality of life; maintaining patient survival; attaining rehydration). Step III involves the periodic reevaluation of the decision made in Step II based on the proposed goal and the attained result.

Culture-bound technological solutions: An artificial theoretic insight

Sometimes, technological solutions to practical problems are devised that conspicuously take into account the constraints to which a given culture is subjecting the particular task or the manner in which it is carried out. The culture may be a professional culture (e.g., the practice of law), or an ethnic-cum-professional culture (e.g., dance in given ethnic cultures from South-East Asia), or, again, a denominational culture prescribing an orthopraxy impinging on everyday life through, for example, prescribed abstinence from given categories of workday activities, or dietary laws. Massimo Negrotti's Theory of the artificial is a convenient framework for discussing some of these techniques. We discuss a few examples, but focus on the contrast of two that are taken from the same cultural background, namely, technological applications in compliance with Jewish Law orthopraxy. •Soya-, mycoprotein- or otherwise derived meat surrogates are an example ofnaturoid; they emulate the flavours and olfactory properties, as well as the texture and the outer and inner appearance, of the meat product (its kind, cut, form) they set out to emulate (including amenability to cooking in the usual manner for the model), while satisfying cultural dietary prohibitions. •In contrast, the Sabbath Notebook, a writing surrogate we describe in this paper, is atechnoid: it emulates a technique (writing to store alphanumeric information), while satisfying the prohibition of writing at particular times of the liturgical calendar (the Sabbath and the major holidays).