Coupling of composite resin cements to quartz fiber posts: A comparison of industrial and ""chairside"" treatments of the post surface

Purpose: To evaluate the influence of surface treatments on microtensile bond strength of luting resin cements to fiber posts. Materials and Methods: Forty-two quartz fiber posts (Light Post, RTD) were divided into 7 groups (n = 6) according to the surface treatment. I and 11: experimental patented industrial treatment consisting of zirconium oxide coating and silanization (RTD); III: industrial treatment followed by adhesive application (XPBond, Dentsply Caulk); IV: adhesive (XPBond); V: adhesive (Prime&Bond NT, Dentsply Caulk); VI: silane (Calibra Silane, Dentsply Caulk); VII: no treatment. Adhesives were used in the self-curing mode. Two cements (Sealbond, RTD - group 1, and Calibra, Dentsply Caulk - groups 11 to VII) were applied on the posts to produce cylindrical specimens. Post/cement interfaces were evaluated under SEM. The surface of the industrially coated posts was examined using energy dispersive analysis by x-ray. Cylinders were cut to obtain microtensile sticks that were loaded in tension at a crosshead speed of 0.5 mm/min until failure. Statistical analysis was performed using Kruskal-Wallis analysis of variance followed by Dunn`s multiple range test for post-hoc comparisons (p < 0.05). Weibull analysis was also performed. Results: The post/cement bond strength was significantly higher on fiber posts treated industrially (I: 23.14 +/- 8.05 MPa; II: 21.56 +/- 7.07 MPa; III: 22.37 +/- 7.00 MPa) or treated with XPBond adhesive (IV: 21.03 +/- 5.34 MPa) when compared to Prime&Bond NT application (V: 14.05 +/- 5.06 MPa), silanization (VI: 6.31 +/- 4.60 MPa) or no treatment (VII: 4.62 +/- 4.31) of conventional fiber posts (p < 0.001). Conclusion: The experimental industrial surface treatment and the adhesive application enhanced fiber post to resin cement interfacial strength. Industrial pretreatment may simplify the clinical luting procedure.

Industrial relations decentralisation and the growth of 12-hour shifts in Australia

In the last two decades, increasing numbers of workplaces in Australia have introduced 12-hour shifts. This increase is due, in part, to government policies aimed at promoting labour flexibility. The purpose of this paper is to examine the cover afforded by the Workplace Relations Act 1996 and other industrial relations legislation in terms of shift-workers’ health and safety. Particular reference is made to the broader social, economic and political context surrounding the introduction and use of 12-hour shifts, as it is this context that shapes the constraints and opportunities facing employers and employees in the work arrangements they choose and how they are negotiated. We conclude that the current system of regulating industrial relations in Australia is largely outcome-focused and inadequate. The bargaining process receives little regulation in terms of considering how changes could affect health and safety in the workplace or how changes might affect individual workers. As a result, the increased introduction of unsafe shiftworking arrangements is a worrying, and likely, prospect.

Effects of slurry rheology on industrial grinding performance

To determine the effect of slurry rheology on industrial grinding performance, 45 surveys were conducted on 16 full-scale grinding mills in five sites. Four operating variables - mill throughput, slurry density, slurry viscosity and feed fines content-were investigated. The rheology of the mill discharge slurries was measured either on-line or off-line, and the data were processed using a standard procedure to obtain a full range of flow curves. Multi-linear regression was employed as a statistical analysis tool to determine whether or not rheological effects exert an influence on industrial grinding, and to assess the influence of the four mill operating conditions on mill performance in terms of the Grinding Index, a criterion describing the overall breakage of particles across the mill. The results show that slurry rheology does influence industrial grinding. The trends of these effects on Grinding Index depend upon the rheological nature of the slurry-whether the slurries are dilatant or pseudoplastic, and whether they exhibit a high or low yield stress. The interpretation of the regression results is discussed, the observed effects are summarised, and the potential for incorporating rheological principles into process control is considered, Guidelines are established to improve industrial grinding operations based on knowledge of the rheological effects. This study confirms some trends in the effect of slurry rheology on grinding reported in the literature, and extends these to a broader understanding of the relationship between slurry properties and rheology, and their effects on industrial milling performance. (C) 2002 Elsevier Science B.V. All rights reserved.

An investigation into commitment in non-Western industrial marketing relationships

This paper reports an investigation into the antecedents of commitment in non-Western industrial marketing relationships. The authors draw the antecedents from extant literature and posit that commitment is related to trust (integrity and reliability), communication quality, conflict, and similarity (social, ethnic, and economic). It is further argued that trust mediates the effects of communication, conflict, and similarity on commitment. As an extension, the authors examine the moderating effects of normative contracts (an implicit understanding of roles and responsibilities) on the construct interrelationships. The hypotheses are tested using data collected from approximately 150 industrial marketing relationships sampled from overseas Chinese firms. The results generally support the authors' framework; however, the mediating hypotheses are not supported. There is evidence of systematic differences in the effects of the studied antecedents on commitment and trust. Furthermore, a multigroup analysis provides evidence of significant moderating effects due to contracting mode. The study provides new insights into the theory and practice of industrial marketing. (C) 2003 Elsevier Science Inc. All rights reserved.

Caf?? com debate: os novos instrumentos da pol??tica industrial e tecnol??gica

A apresenta????o abordas os temas do desenvolvimento industrial e tecnol??gico brasileiro, bem como sua competitividade comercial no exterior

Colet??nea de pol??ticas p??blicas: volume 2: a pol??tica industrial no Brasil, 1985-1992: pol??ticos, burocratas e interesses organizados no processo de policy-making

O principal objetivo deste livro ?? constituir uma fonte de pesquisa para o estudo do processo de produ????o e implementa????o de pol??ticas p??blicas. Por meio de textos selecionados, analisa-se o pr??prio conceito de pol??ticas p??blicas, discute-se as defini????es utilizadas para distinguir suas diversas fases e apresenta-se algumas das principais correntes te??ricas de an??lise sobre o processo de pol??ticas p??blicas.

O discurso e a ação : análise do processo de mudança no sistema de controle gerencial em uma organização industrial brasileira sob a ótica da teoria institucional

O objetivo desse estudo foi investigar o processo de mudança no sistema de controle gerencial (SCG), analisando a alteração das práticas de controle gerencial na estrutura desse sistema, sob a ótica da teoria institucional. A questão de pesquisa é: como ocorre o processo de mudança no SCG em uma organização industrial brasileira? Para tanto, optou-se por uma abordagem qualitativa do tipo descritiva, num estudo de caso único, utilizando como métodos de coleta de dados entrevistas individuais não estruturadas e semiestruturadas com 11 gestores e usuários do SCG, observação não participante e levantamento documental. A coleta dos dados ocorreu entre agosto/2014 e março/2015. Como método de análise e interpretação de dados foram utilizados elementos da análise do discurso (AD). Os principais referenciais teóricos foram os trabalhos de Meyer e Rowan (1977), Dimaggio e Powel (1983, 1991, 2007), Scott (1995, 2008a, 2008b) e Machado-da- Silva e Vizeu (2007) sobre a teoria institucional; Huy (2001), Beekman, Chenhall e Euske (2007) e Machado-da-Silva, Fonseca e Crubellate (2010) referente ao processo de mudança; e Malmi e Brown (2008) e Simons (1995) referente ao SCG; destacando a aplicação empírica dos modelos teóricos de Malmi e Brown (2008), Simons (1995) e Huy (2001). Na análise dos dados, foi identificado o desenho e o uso do SCG, relatando como está transcorrendo a alteração de suas práticas de controle gerencial, identificando os fatores de estímulo e resistência à institucionalização dessas práticas e quais os atores organizacionais que estão atuando como agentes da mudança. Por fim, foram identificados os aspectos discursivos recorrentes que permeiam o discurso da empresa pesquisada, alinhados ao processo de mudança no SCG. Como contribuições, foi demonstrada a influência dos fatores isomórficos na escolha das práticas de controle gerencial, a evidência de que o SCG é socialmente construído, as implicações da centralização do poder e da ausência de estratégias para o SCG, evidências de que o processo de mudança no SCG não é meramente mecânico ou automatizado e ainda, que o discurso da mudança pode permear a organização sem que a ação seja concretizada, revelando um descompasso entre o discurso e a ação