A Proportional plus Multiresonant Controller for Three-Phase Four-Wire High-Frequency Link Inverter

A new solution for unbalanced and nonlinear loads in terms of power circuit topology and controller structure is proposed in this paper. A three-phase four-wire high-frequency ac-link inverter is adopted to cater to such loads. Use of high-frequency transformer results in compact and light-weight systems. The fourth wire is taken out from the midpoint of the isolation transformer in order to avoid the necessity of an extra leg. This makes the converter suitable for unbalanced loads and eliminates the requirements of bulky capacitor in half-bridge inverter. The closed-loop control is carried out in stationary reference frame using proportional + multiresonant controller (three separate resonant controller for fundamental, fifth and seventh harmonic components). The limitations on improving steady-state response of harmonic resonance controllers is investigated and mitigated using a lead-lag compensator. The proposed voltage controller is used along with an inner current loop to ensure excellent performance of the power converter. Simulation studies and experimental results with 1 kVA prototype under nonlinear and unbalanced loading conditions validate the proposed scheme.

Structural alteration from non-B to B-form could reflect DNase I hypersensitivity

Preferential cleavage of active genes by DNase I has been correlated with a structurally altered conformation of DNA at the hypersensitive site in chromatin. To have a better understanding of the structural requirements for gene activation as probed by DNase I action, digestability by DNase I of synthetic polynucleotides having the ability to adopt B and non-B conformation (like Z-form) was studied which indicated a marked higher digestability of the B-form of DNA. Left handed Z form present within a natural sequence in supercoiled plasmid also showed marked resistance towards DNase I digestion. We show that alternating purine-pyrimidine sequences adopting Z-conformation exhibit DNAse I foot printing even in a protein free system. The logical deductions from the results indicate that 1) altered structure like Z-DNA is not a favourable substrate for DNase I, 2) both the ends of the alternating purine-pyrimidine insert showed hypersensitivity, 3) B-form with a minor groove of 12-13 A is a more favourable substrate for DNase I than an altered structure, 4) any structure of DNA deviating largely from B form with a capacity to flip over to the B-form are potential targets for the DNase I enzymic probes in naked DNA.

Reactivity with hydrogen of pure iron oxide and of iron oxides doped with oxides of Mn, Co, Ni and Cu

Using dynamic TG in H2, X-ray powder diffraction and Mössbauer Spectroscopy the reactivities fot hydrogen reduction of Fe2O3 prepared at different temperatures, Fe2O3 doped with oxides of Mn, Co, Ni and Cu prepared at 300DaggerC from nitrate precursors and intermediate spinels derived from above samples during reduction have been explored. The reactivity is higher for finely divided Fe2O3 prepared at 250DaggerC. The reduction is retarded by Mn, marginally affected by Co and accelerated by Ni and Cu, especially at higher (5 at.%) dopant concentration. These reactivities confirmed also by isothermal experiments, are ascribed to the nature of disorder in the metastable intermediate spinels and to hydrogen rsquospill overrsquo effects.

Processing map for hot working of stainless steel type AISI 316L

Processing and instability maps using a dynamic materials model have been developed for stainless steel type AISI 316L in the temperature range 600-1250-degrees-C and strain rate range 0.001-100 s-1 with a view to optimising its hot workability. Stainless steel type AISI 316L undergoes dynamic recrystallisation, with a peak efficiency of 35% at 1250-degrees-C and 0.05 s-1, which are the optimum parameters for hot working this material. The material undergoes dynamic recovery at 900-degrees-C and 0.001 s-1. The increase in the dynamic recrystallisation and dynamic recovery temperatures in comparison with stainless steel type AISI 304L is attributed to the presence of a backstress caused by the molybdenum additions. These results are in general agreement with those reported elsewhere on stainless steel type 316 deformed in hot extrusion and hot torsion. At temperatures < 850-degrees-C and strain rates > 10 s-1, the material exhibits flow localisation owing to adiabatic shear band formation, whereas at higher temperatures (> 850-degrees-C) and strain rates (> 10 s-1) mechanical twinning and wavy slip bands are observed. (C) 1993 The Institute of Materials.

Systematic crystallographic investigation of hydrogen-bonded networks involving monohydrogen tartrate-amine complexes: Potential materials for nonlinear optics

Crystal structures of six binary salts involving aromatic amines as cations and hydrogen tartrates as anions are presented. The materials are 2,6-xylidinium-L-monohydrogen tartrate monohydrate, C12H18O6.5N, P22(1)2(1), a = 7.283(2) Angstrom, b = 17.030(2) Angstrom, c = 22.196(2) Angstrom, Z = 8; 2,6-xylidinium-D-dibenzoyl monohydrogen tartrate, C26H25O8N, P2(1), a = 7.906(1) Angstrom, b = 24.757(1) Angstrom, c = 13.166(1) Angstrom, beta = 105.01(1)degrees, Z = 4; 2,3-xylidinium-D-dibenzoyl monohydrogen tartrate monohydrate, C26H26O8.5N, P2(1), a = 7.837(1) Angstrom, b = 24.488(1) Angstrom, c = 13.763(1) Angstrom, beta = 105.69(1)degrees, Z = 4; 2-toluidinium-D-dibenzoyl monohydrogen tartrate, C25H23O8N, P2(1)2(1)2(1), a = 13.553(2) Angstrom, b = 15.869(3) Angstrom, c = 22.123(2) Angstrom, Z = 8; 3-toluidinium-D-dibenzoyl monohydrogen tartrate (1:1), C25H23O8N, P1, a = 7.916(3) Angstrom, b = 11.467(6) Angstrom, c = 14.203(8) Angstrom, alpha = 96.44(4)degrees, beta = 98.20(5)degrees, = 110.55(5)degrees, Z = 2; 3-toluidinium-D-dibenzoyl tartrate dihydrate (1:2), C32H36O10N, P1, a = 7.828(3) Angstrom, b = 8.233(1) Angstrom, c = 24.888(8) Angstrom, alpha = 93.98 degrees, beta = 94.58(3)degrees, = 89.99(2)degrees, Z = 2. An analysis of the hydrogen-bonding schemes in terms of crystal packing, stoichiometric variations, and substitutional variations in these materials provides insights to design hydrogen-bonded networks directed toward the engineering of crystalline nonlinear optical materials.

Facial Coordination in BIS[BIS(Benzimidazol-2-Ylmethyl)Amine]Copper(II) Perchlorate Dihydrate - Synthesis, Structure, Spectra and Redox Behavior

The 1:1 and 1:2 cooper(II) complexes with the tridentate compound bis(benzimidazol-2-ylmethyl)amine (L(1)) and its benzimidazole (L(2)) and amine (L(3)) N-methyl-substituted derivatives have been prepared and their spectroscopic properties studied. While the 1:1 complexes are of the type CuLX(2) nH(2)O (X = C/O-4(-), NO3-, Cl- or Br-), the 1:2 complexes are of the type CuL(2) (ClO4)(2) nH(2)O (L = L(1) or L(3), n = 0-4). In all these complexes L acts as a tridentate ligand with the amine nitrogen and both the benzimidazole nitrogens co-ordinating to Cu-II. The complex [CuL(2)(1)][ClO4](2) 2H(2)O crystallises in the monoclinic space group P2(1)/c with a = 9.828(2), b = 9.546(2) and c = 19.906(2) Angstrom and beta = 95.71(1)degrees, for Z = 2. The R value is 0.0635 for 2180 significant reflections. The copper(II) ion has an elongated octahedral geometry with four equatorial benzimidazole and two long-distance axial amine N donors. The Cu-N-bzim and Cu-N-amine distances are 2.011(4) and 2.597(6) Angstrom respectively. Factors favouring facial co-ordination to tridentate ligands are discussed. The 1:1 complexes involve meridonal co-ordination of the ligands, with square-based geometry as revealed by ligand-field and EPR spectral properties. The NMe substitution as in CuL(3)(ClO4)(2) confers low V ($) over tilde$$(max) and high E(1/2) for the cu(II)-Cu-I couple. Most of the 1:1 complexes are less reversible but exhibit E(1/2) values more positive than those of the corresponding 1:2 complexes.

Continuous Recording of Retardation and Intensity of Echoes from the Ionosphere

Pulse retardation method of Breit and Tuve has been modified to record continuously the equivalent height as well as the intensity of reflections from the ionosphere. Synchronized pulses are transmitted, and the received ground pulse and the reflected pulses, after amplification and suitable distortion, are applied to the focusing cylinder of a cathode ray tube the horizontal deflecting plates of which are connected to a synchronized linear time base circuit. The pattern on the screen is composed of a bright straight line corresponding to the time base with dark gaps corresponding to the received pulses. The distance between the initial points of the gaps represents retardation while the widths of the gaps correspond to the intensity of the pulses. The pattern is photographed on a vertically moving film. One of the first few records taken at Bangalore on 4 megacycles is reproduced. It shows, among other things, that the less retarded component of magneto-ionic splitting from the F layer is present most of the time. Whenever the longer retardation component does occur, it has stronger intensity than the former. Towards the late evening hours, just before disappearing, when the F layer rises and exhibits magnetoionic splitting, the intensity of the less retarded component is extremely low compared with the other component.

Transmit Power Control Policies for Energy Harvesting Sensors With Retransmissions

This paper addresses the problem of finding outage-optimal power control policies for wireless energy harvesting sensor (EHS) nodes with automatic repeat request (ARQ)-based packet transmissions. The power control policy of the EHS specifies the transmission power for each packet transmission attempt, based on all the information available at the EHS. In particular, the acknowledgement (ACK) or negative acknowledgement (NACK) messages received provide the EHS with partial information about the channel state. We solve the problem of finding an optimal power control policy by casting it as a partially observable Markov decision process (POMDP). We study the structure of the optimal power policy in two ways. First, for the special case of binary power levels at the EHS, we show that the optimal policy for the underlying Markov decision process (MDP) when the channel state is observable is a threshold policy in the battery state. Second, we benchmark the performance of the EHS by rigorously analyzing the outage probability of a general fixed-power transmission scheme, where the EHS uses a predetermined power level at each slot within the frame. Monte Carlo simulation results illustrate the performance of the POMDP approach and verify the accuracy of the analysis. They also show that the POMDP solutions can significantly outperform conventional ad hoc approaches.

Raman spectroscopy explores molecular structural signatures of hidden materials in depth: Universal Multiple Angle Raman Spectroscopy

Non-invasive 3D imaging in materials and medical research involves methodologies such as X-ray imaging, MRI, fluorescence and optical coherence tomography, NIR absorption imaging, etc., providing global morphological/density/absorption changes of the hidden components. However, molecular information of such buried materials has been elusive. In this article we demonstrate observation of molecular structural information of materials hidden/buried in depth using Raman scattering. Typically, Raman spectroscopic observations are made at fixed collection angles, such as, 906, 1356, and 1806, except in spatially offset Raman scattering (SORS) (only back scattering based collection of photons) and transmission techniques. Such specific collection angles restrict the observations of Raman signals either from or near the surface of the materials. Universal Multiple Angle Raman Spectroscopy (UMARS) presented here employs the principle of (a) penetration depth of photons and then diffuse propagation through non-absorbing media by multiple scattering and (b) detection of signals from all the observable angles.

Efecto de diferentes densidades de siembra y niveles de fertilizacion nitrogenada sobre el rendimiento de Moringa oleifera, Managua, Nicaragua

El presente trabajo tuvo como objetivo evaluar el efecto de dos densidades de siembra y cuatro niveles nitrogenados sobre la producción de Moringa oleifera. El ensayo se llevo a cabo en la hacienda “Las Mercedes”, localizada geográficamente a 86° 16 ́ 50 ̈ longitud oeste 12° 9 ́ 2.66 ̈ longitud norte, Municipio de Managua, de junio 2007 a Octubre 2008. El diseño experimental usado fue un factorial con dos dens idades de siembra (100 000 plantas/ha y 166 666 plantas/ha) como factor principal y por 4 niveles de fertilización; (0 kg N/ha/año, 446 kg N/ha/año, 906.2 kg N/ha/año, 1334 kg N/ha/año); como factor secundario, en un arreglo de parcela dividida usando las Densidades como parcela principal y los niveles de fertilización como sub-parcela. Las variables de estudio fueron: Rendimiento de materia fresca total (RMFT),rendimiento de materia fresca fracción fina (RMFFF), rendimiento de materia fresca fracción gruesa (RMFFG), Rendimiento de materia seca total (RMST), Rendimiento de materia seca fracción fina (RMSFF), Rendimiento de materia seca fracción gruesa (RMFFG), Altura promedio de plantas, mortalidad de plantas y Tasa de Crecimiento (TC). Se realizó análisis de varianza (ANDEVA) y comparaciones con la Prueba de Tukey utilizando MINITAB, versión 13.0. los resultados en el ANDEVA mostraron que las densidades de siembra no presentaron efecto significativo (P<0.05) sobre las variables evaluadas, no así la fertilización que si presentaron efecto significativo (P<0.05) para todas las variables evaluadas, el nivel de fertilización nitrogenada III presentó los mejores resultados para las variables RMFT(186.35 Ton/ha/año), RMFFF(138.52Ton/ha/año), RMFFG(47.82 Ton/ha/año), RMST(26.43 Ton/ha/año), RMSFF(19.23 Ton/ha/año) y RMSFG(7.23 Ton/ha/año), Altura de las plantas (1.39 m) y TC(73.42kgMS/ha/dia)

Efecto de la densidad de siembra y nivel de fertilizacion nitrogenada sobre el rendimiento de Moringa oleifera en suelo franco arcilloso. Universidad Nacional Agraria (UNA). Managua, Nicaragua

El presente trabajo se realizó con el objetivo de evaluar el efecto de dos densidades de siembra y cuatro niveles nitrogenados sobre la producción de Moringa oleífera. El ensayo se llevó a cabo en la finca Santa Rosa, localizada geográficamente de 12°08’15’’ a latitud Norte y 86°09’36’’ a longitud e ste, municipio de Managua, de mayo 2008 a septiembre 2009; el diseño experimental fue un bifactorial con parcela dividida usando las densidades como parcela principal (100,000 plantas ha-1 y 166,666 plantas ha-1) y los niveles de fertilización (0 kg N ha año-1, 446 kg N ha año-1, 906.2 kg N ha año-1, 1334 kg N ha año-1)como sub -parcela. Las variables de estudio fueron: rendimiento de materia fresca total (RMFT), rendimiento de materia fresca fracción fina (RMFFF), rendimiento de materia fresca fracción gruesa (RMFFG), rendimiento de materia seca total (RMST), rendimiento de materia seca fracción fina (RMSFF), rendimiento de materia seca fracción gruesa (RMFFG), a ltura promedio de plantas, Mortalidad de plantas y Tasa de crecimiento (TC). Se realizó análisis de varianza (ANDEVA) y comparaciones con la prueba de Tukey utilizando MINITAB, versión 13.0. Los resultados en el ANDEVA, mostraron que la fertilización presentó efecto significativo (P<0.05) con los mejores rendimientos el nivel 150 %, con RMFT (69.17 to n ha año-1), RMFFF (60.72 ton ha año-1), RMFG (8.45 ton ha año-1), RMST (10.81 ton ha año-1), RMSFF (9.69 ton ha año -1), RMSFG (1.12 ton ha año-1), Altura de las plantas(1.33 m) y TC( 28.91), la densidad de siembra presentó efectos significativos (P<0.05)sólo para la variable Mortalidad con (18.08 %).

Legislação sobre museus

Leis nº 11.904, de 14 de janeiro de 2009, que institui o Estatuto de Museus, nº 11.906, de 20 de janeiro de 2009, que cria o Instituto Brasileiro de Museus (Ibram), e legislação correlata.

Euskal nazionalismoaren diskurtsoa gaur egungo immigrazioaren aurrean

340 p.

可调复合旋光器的研制

旋光器是常用的偏光器件之一，通常用晶体旋光材料制成，其旋转角是不可调的．本文研制了一种新型可调复合旋光器，结构简单，其旋转角连续可调．从理论和实验可看出，无论入射线偏振光的振动方向如何，出射线偏振光总是相对入射光偏转2γ．从而克服了一般旋光器的不可调性，为科学实验提供了方便．