Grain Floatation During Equiaxed Solidification of an Al-Cu Alloy in a Side-Cooled Cavity: Part I-Experimental Studies

Experimental studies were performed to investigate the role and influence of grain movement on macrosegregation and microstructure evolution during equiaxed solidification. Casting experiments were performed with a grain-refined Al-Cu alloy in a rectangular sand mold. For the aluminum alloy studied, the equiaxed grains are lighter than the bulk melt and thus float up. Experiments were designed to investigate floatation phenomena of equiaxed grains in the presence of thermosolutal convection. Cooling curves were recorded at key locations in both the casting and the chill. Quantitative image analysis and spatial chemical analysis were performed on the solidified casting to observe the chemical and microstructural inhomogeneity created by the melt convection and solid floatation. Several notable features that can be attributed to grain movement were observed in temperature histories, macrosegregation patterns, and microstructures. In our experiments, the floatation of grains influences the thermal conditions and the overall flow direction in the casting cavity. In some cases, the induced flow resulting from the grain movement caused a flow reversal. This in turn influences the solidification direction, microstructure evolution, and the overall macrosegregation behavior.

A Matroidal Framework for Network-Error Correcting Codes

Matroidal networks were introduced by Dougherty et al. and have been well studied in the recent past. It was shown that a network has a scalar linear network coding solution if and only if it is matroidal associated with a representable matroid. A particularly interesting feature of this development is the ability to construct (scalar and vector) linearly solvable networks using certain classes of matroids. Furthermore, it was shown through the connection between network coding and matroid theory that linear network coding is not always sufficient for general network coding scenarios. The current work attempts to establish a connection between matroid theory and network-error correcting and detecting codes. In a similar vein to the theory connecting matroids and network coding, we abstract the essential aspects of linear network-error detecting codes to arrive at the definition of a matroidal error detecting network (and similarly, a matroidal error correcting network abstracting from network-error correcting codes). An acyclic network (with arbitrary sink demands) is then shown to possess a scalar linear error detecting (correcting) network code if and only if it is a matroidal error detecting (correcting) network associated with a representable matroid. Therefore, constructing such network-error correcting and detecting codes implies the construction of certain representable matroids that satisfy some special conditions, and vice versa. We then present algorithms that enable the construction of matroidal error detecting and correcting networks with a specified capability of network-error correction. Using these construction algorithms, a large class of hitherto unknown scalar linearly solvable networks with multisource, multicast, and multiple-unicast network-error correcting codes is made available for theoretical use and practical implementation, with parameters, such as number of information symbols, number of sinks, number of coding nodes, error correcting capability, and so on, being arbitrary but for computing power (for the execution of the algorithms). The complexity of the construction of these networks is shown to be comparable with the complexity of existing algorithms that design multicast scalar linear network-error correcting codes. Finally, we also show that linear network coding is not sufficient for the general network-error correction (detection) problem with arbitrary demands. In particular, for the same number of network errors, we show a network for which there is a nonlinear network-error detecting code satisfying the demands at the sinks, whereas there are no linear network-error detecting codes that do the same.

Cryogenian magmatism and crustal reworking in the Southern Granulite Terrane, India

Understanding Neoproterozoic crustal evolution is fundamental to reconstructing the Gondwana supercontinent, which was assembled at this time. Here we report evidence of Cryogenian crustal reworking in the Madurai Block of the Southern Granulite Terrane of India. The study focuses on a garnet-bearing granite-charnockite suite, where the granite shows in situ dehydration into patches and veins of incipient charnockite along the contact with charnockite. The granite also carries dismembered layers of Mg-Al-rich granulite. Micro-textural evidence for dehydration of granite in the presence of CO2-rich fluids includes the formation of orthopyroxene by the breakdown of biotite, neoblastic zircon growth in the dehydration zone, at around 870 degrees C and 8kbar. The zircon U-Pb ages suggest formation of the granite, charnockite, and incipient charnockite at 836 +/- 73, 831 +/- 31, and 772 +/- 49Ma, respectively. Negative zircon epsilon Hf (t) (-5 to -20) values suggest that these rocks were derived from a reworked Palaeoproterozoic crustal source. Zircon grains in the Mg-Al-rich granulite record a spectrum of ages from ca. 2300 to ca. 500Ma, suggesting multiple provenances ranging from Palaeoproterozoic to mid-Neoproterozoic, with neoblastic zircon growth during high-temperature metamorphism in the Cambrian. We propose that the garnet-bearing granite and charnockite reflect the crustal reworking of aluminous crustal material indicated by the presence of biotite+quartz+aluminosilicate inclusions in the garnet within the granite. This crustal source can be the Mg-Al-rich layers carried by the granite itself, which later experienced high-temperature regional metamorphism at ca. 550Ma. Our model also envisages that the CO2 which dehydrated the garnet-bearing granite generating incipient charnockite was sourced from the proximal massive charnockite through advection. These Cryogenian crustal reworking events are related to prolonged tectonic activities prior to the final assembly of the Gondwana supercontinent.

爆破方法识别滑带试验研究

以往对滑坡体中软弱层与滑带的识别主要依赖十钻孔并辅之以工程师的经验。采用在钻孔中进行爆破的方法，通过对地表接收信号的波形分析即可十分方便地识别出软弱层与滑带。简耍阐述了该方法的理论依据，通过对现场爆破实验测量信号的分析可以发现，该方法可以减少钻孔数量以及提高滑带识别的精度与效率。

Evaluación de sistemas productivos a pequeña escala de maíz y frijol utilizando indicadores de calidad de suelo en la microcuenca Las Jaguas, Ciudad Antigua 2011

Con el propósito de evaluar rendimientos y adaptabilidad de variedades mejoradas de maíz y frijol ante las frecuentes sequías y su efecto a la mejora de la calidad de suelo en la microcuenca Las Jaguas, municipio de Ciudad Antigua; se establecieron en tres fincas representativas del área un total de diez parcelas ó ensayos productivos en sitios que oscilan entre 880 y 1 980 m 2 , en época de postrera 2011. Las variedades utilizadas fueron maíz NUTRADER, maíz criollo Catacama (NB-9043), maíz criollo H-5, frijol INTA-Rojo y frijol Estelí 90 como criollo. Previo al establecimiento de los ensayos, se seleccionaron localmente un grupo de indicadores sencillos entre los cuales están: el contenido de materia orgánica en el suelo, tasa de infiltración de agua en el suelo, textura, pendiente del terreno, profundidad del suelo, piedras en la superficie, espesor orgánico, pH y fósforo disponible. Los cálculos indican que el contenido de materia orgánica comprende niveles de medio a alto; este indicador es el más importante ya que permite evaluar la calidad de suelos en vista de la influencia positiva en las propiedades y funciones básicas del suelo. Los niveles de fósforo disponible van de pobre a regular, presenta suelos muy ligeramente ácidos, textura de franco arcilloso arenosa a franco limosa arenosa; sin embargo, estos suelos tienen potencial para establecer una alternativa que permita incrementar los rendimientos de los cultivos, mediante prácticas de manejo adecuado como obras de conservación de suelos garantizando de esta manera la sostenibilidad de este recurso. Los resultados obtenidos indicaron una respuesta diferente a la aplicación de las fuentes de fertilizantes (18-46-0) y abono orgánico (lombrihumus), superando a todos los ensayos con rendimientos promedios de 1 291 kg ha -1 y 1 223 kg ha -1 , seguido por los ensayos establecidos con lombrihumus con rendimiento de 773 kg ha -1 y 427 kg ha -1 para el cultivo de frijol. En el caso del cultivo de maíz los mayores rendimientos fueron de 1 850 kg ha -1 y 1 836 kg ha -1 respectivamente, mediante la aplicación de urea y lombrihumus. El análisis económico muestra que el ensayo con fertilización lombrihumus mas 18-46-0 obtuvo los mayores beneficios económicos con C$ 1.40 por cada córdoba invertido, sin embargo, agronómicamente los mayores rendimientos se producen con la fertilización mineral y abono orgánico.

强引力场中的一维活塞过程

本文在直角坐标系、柱坐标及球坐标系中研究一维匀速活塞在强引力场中的动力学过程。用特征线法数值求解流体力学方程组,得出符合活塞速度条件及联结条件的解。分析讨论了不同坐标系对压缩区,常流区,稀疏区流场、激波传播速度及活塞面上声速的影响。

Reflection and refraction of light at the interface of a uniaxial bicrystal

This paper deals with a theoretical analysis of the reflection and refraction of light at the interface of a bicrystal by use of Maxwell's equations. For a general case, the formulas of Snell's Law and the four Fresnel coefficients for the reflection and refraction of extraordinary light at the interface of a uniaxial bicrystal are derived for the first time, as well as the Brewster angle value. The condition for total reflection is presented and the electromagnetic fields distributions at both sides of a bicrystal are presented when total reflection occurs.

Investigation of noncollinear QPM optical parametric amplification based on periodically poled KTP

The properties of noncollinear optical parametric amplification based on quasi-phase matching of periodically poled KTP are investigated theoretically. Our numerical simulation focuses on the gain spectrum of dependence upon noncollinear angle, crystal temperature and crystal angle. At the optimal noncollinear angle and grating period with fixed temperature, there exists a broadest gain bandwidth about 130 nm at signal wavelength of 800 nm. The deviation from optimal noncollinear angle can be compensated by accurately tuning the crystal angle or temperature with a fixed grating period for phase matching. (c) 2004 Elsevier B.V. All rights reserved.

掺铒碲钨酸盐玻璃及其平面波导

研制了一种用于宽带波导放大器的掺铒碲钨酸盐激光玻璃材料，对玻璃热稳定性、光谱性质进行了表征，并在其上采用离子交换法制作了平面光波导．掺铒碲钨酸盐玻璃的转变温度Tg和析品开始温度Tx分别为377．1和488．5℃；荧光半高宽为52nm；应用McCumber理论，计算得出Er^3+离子4I13／2→^4I15／2跃迁在峰值波长1532nm的受激发射截面为0．91×10^-20cm^2．不同条件下制作了在632．8nm处多模的平面光波导，通过拟合得到Ag^+离子在300℃的有效扩散系数De为2．82×10^-1

U. S. Trade in Tuna for Canning, 1987

U.S. tuna fleet activity, canned tuna processing, ex-vessel, wholesale and retail prices and imports in 1987 are described and compared to their counterparts in previous years. Industry statistics gathered from government agencies and industry contacts are presented in 14 figures and 8 tables. In 1987, U.S. tuna fisheries delivered 253,136 short tons (tons) of tuna to U.S. canneries. Domestic deliveries of albacore (white-meat) tuna were 2,836 tons, down 20 percent from 1986 levels. Domestic deliveries of tropical (light-meat) tuna (bigeye, blackfin, bluefin, skipjack, and yellowfin) were 251,000 tons, up 12 percent. Contract prices for tuna delivered by U. S. vessels to U. S. canneries increased dramatically in 1987. Depending on the size of fish in the delivery, ex-vessel prices of white-meat tuna increased as much as 27 percent, and prices of light-meat tuna increased as much as 47 percent. U. S. cannery receipts of imported and domestically caught raw frozen tuna for canning totaled 532,704 tons in 1987, up 2 percent from 1986 levels. U.S. cannery receipts of white-meat tuna were 104,197 tons, down 10 percent from 1986. Imports made up 97 percent of the total cannery supply. Total 1987 U. S. cannery receipts of raw, frozen light meat tuna were 428,507 tons, up 5 percent from 1986 levels. Imports made up 41 percent of the total cannery supply. The 1987 U.S. pack of canned tuna was 33.6 million standard cases, up 3 percent from 1986. The pack of white-meat tuna was 7.2 million standard cases, down 11 percent from 1986; the pack of light-meat tuna was 26.4 million standard cases, up 7 percent. U. S. imports of canned tuna in 1987 were 10.8 million standard cases, down 11 percent from 1986 levels, the first time in recent years that imports have declined. Per capita consumption of canned tuna in the United States was 3.5 pounds in 1987, down slightly from 1986. The retail composite price was $2.26 per pound, unchanged from 1986.