Induced higher-order aberrations after laser in situ keratomileusis (LASIK) performed with wavefront-guided IntraLase femtosecond laser in moderate to high astigmatism

Background Wavefront-guided Laser-assisted in situ keratomileusis (LASIK) is a widespread and effective surgical treatment for myopia and astigmatic correction but whether it induces higher-order aberrations remains controversial. The study was designed to evaluate the changes in higher-order aberrations after wavefront-guided ablation with IntraLase femtosecond laser in moderate to high astigmatism. Methods Twenty-three eyes of 15 patients with moderate to high astigmatism (mean cylinder, −3.22 ± 0.59 dioptres) aged between 19 and 35 years (mean age, 25.6 ± 4.9 years) were included in this prospective study. Subjects with cylinder ≥ 1.5 and ≤2.75 D were classified as moderate astigmatism while high astigmatism was ≥3.00 D. All patients underwent a femtosecond laser–enabled (150-kHz IntraLase iFS; Abbott Medical Optics Inc) wavefront-guided ablation. Uncorrected (UDVA), corrected (CDVA) distance visual acuity in logMAR, keratometry, central corneal thickness (CCT) and higher-order aberrations (HOAs) over a 6 mm pupil, were assessed before and 6 months, postoperatively. The relationship between postoperative change in HOA and preoperative mean spherical equivalent refraction, mean astigmatism, and postoperative CCT were tested. Results At the last follow-up, the mean UDVA was increased (P < 0.0001) but CDVA remained unchanged (P = 0.48) and no eyes lost ≥2 lines of CDVA. Mean spherical equivalent refraction was reduced (P < 0.0001) and was within ±0.50 D range in 61 % of eyes. The average corneal curvature was flatter by 4 D and CCT was reduced by 83 μm (P < 0.0001, for all), postoperatively. Coma aberrations remained unchanged (P = 0.07) while the change in trefoil (P = 0.047) postoperatively, was not clinically significant. The 4th order HOAs (spherical aberration and secondary astigmatism) and the HOA root mean square (RMS) increased from −0.18 ± 0.07 μm, 0.04 ± 0.03 μm and 0.47 ± 0.11 μm, preoperatively, to 0.33 ± 0.19 μm (P = 0.004), 0.21 ± 0.09 μm (P < 0.0001) and 0.77 ± 0.27 μm (P < 0.0001), six months postoperatively. The change in spherical aberration after the procedure increased with an increase in the degree of preoperative myopia. Conclusions Wavefront-guided IntraLASIK offers a safe and effective option for vision and visual function improvement in astigmatism. Although, reduction of HOA is possible in a few eyes, spherical-like aberrations are increased in majority of the treated eyes.

Two-step self-assembly of hierarchically-ordered nanostructures

Due to their unique size- and shape-dependent physical and chemical properties, highly hierarchically-ordered nanostructures have attracted great attention with a view to application in emerging technologies, such as novel energy generation, harvesting, and storage devices. The question of how to get controllable ensembles of nanostructures, however, still remains a challenge. This concept paper first summarizes and clarifies the concept of the two-step self-assembly approach for the synthesis of hierarchically-ordered nanostructures with complex morphology. Based on the preparation processes, two-step self-assembly can be classified into two typical types, namely, two-step self-assembly with two discontinuous processes and two-step self-assembly completed in one-pot solutions with two continuous processes. Compared to the conventional one-step self-assembly, the two-step self-assembly approach allows the combination of multiple synthetic techniques and the realization of complex nanostructures with hierarchically-ordered multiscale structures. Moreover, this approach also allows the self-assembly of heterostructures or hybrid nanomaterials in a cost-effective way. It is expected that widespread application of two-step self-assembly will give us a new way to fabricate multifunctional nanostructures with deliberately designed architectures. The concept of two-step self-assembly can also be extended to syntheses including more than two chemical/physical reaction steps (multiple-step self-assembly).

A recursive perspective on discursive legitimation and organizational action in mergers and acquisitions

This paper challenges the predominant view that legitimation is merely a specific phase in merger or acquisition processes. We argue that a better understanding of postmerger organizational dynamics calls for conceptualization of discursive legitimation as an inherent part of unfolding merger processes. In particular, we focus on the recursive relationship between legitimation and organizational action. We have two objectives: to outline a theoretical model that helps one to understand the dynamics of discursive legitimation and organizational action in postmerger organizations, and to examine a revealing case to distinguish the inherent risks and problems in discursive legitimation. Our case analysis focuses on the merger between the French pharmaceutical companies BioMérieux and Pierre Fabre. We adopt a critical multimethod approach and distinguish specific discursive dynamics and pathological tendencies in this case. The analysis highlights the unintended consequences of discursive legitimation, the central role of sensegiving and sensehiding in discursive legitimation, the inherently political nature of legitimation and the risks associated with politicization, the special problems associated with fashionable discourses and the role of the media, the use of specific discursive strategies for legitimation and delegitimation, and the crucial role of actual integration results. This analysis adds to the existing research on mergers and acquisitions by treating discursive legitimation as part of the merger dynamics. In particular, our case analysis provides a new explanation for merger failure. We also believe that the recursive model connecting discursive legitimation and delegitimation strategies to concrete organizational action makes a more general contribution to our understanding of organizational legitimation.

Effect of sintering on optical, structural and photoluminescence properties of ZnO thin films prepared by sol-gel process

Zinc oxide (ZnO) thin films have been deposited on glass substrates via sol-gel technique using zinc acetate dihydrate as precursor by spin coating of the sol at 2000 rpm. Effects of annealing temperature on optical, structural and photo luminescence properties of the deposited ZnO films have been investigated. The phase transition from amorphous to polycrystalline hexagonal wurtzite structure was observed at an annealing temperature of 400 degrees C. An average transmittance of 87% in the visible region has been obtained at room temperature. The optical transmittance has slightly increased with increase of annealing temperature. The band gap energy was estimated by Tauc's method and found to be 3.22 eV at room temperature. The optical band gap energy has decreased with increasing annealing temperature. The photoluminescence (PL) intensity increased with annealing temperature up to 200 degrees C and decreased at 300 degrees C. (c) 2010 Elsevier B.V. All rights reserved.

Pulsed laser deposited ZnO/ZnO:Li multilayer for blue light emitting diodes

Thin films of ZnO, Li doped ZnO (ZLO) and multilayer of ZnO and ZLO (ZnO/ZLO) were grown on silicon and corning glass substrates by pulsed laser deposition technique. Single phase formation and the crystalline qualities of the films were analyzed by X-ray diffraction and Li composition in the film was investigated to be 15 wt% by X-ray photoelectron spectroscopy. Raman spectrum reveals the hexagonal wurtzite structure of ZnO, ZLO and ZnO/ZLO multilayer and confirms the single phase formation. Films grown on corning glass shows more than 80% transmittance in the visible region and the optical band gaps were calculated to be 3.245, 3.26 and 3.22 eV for ZnO, ZLO and ZnO/ZLO, respectively. An efficient blue emission was observed in all films which were grown on silicon (1 0 0) substrate by photoluminescence (PL). PL measurements at different temperatures reveal that the PL emission intensity of ZnO/ZLO multilayer was weakly dependent on temperature as compared to the single layers of ZnO and ZLO and the wavelength of emission was independent of temperature. Our results indicate that ZnO/ZLO multilayer can be used for the fabrication of blue light emitting diodes. (C) 2011 Elsevier B.V. All rights reserved.

Spontaneous formation of branched nanochains from room temperature molten amides: visible and near-IR active, SERS substrates for non-fluorescent and fluorescent analytes

Highly stable, branched gold nanoworms are formed spontaneously in an acetamide-based room temperature molten solvent without any additional external stabilizing or aggregating agent. The nanoworms can be anchored onto solid substrates such as indium tin oxide (ITO) without any change in morphology. The anchored nanoworms are explored as substrates for surface enhanced Raman scattering (SERS) studies using non-fluorescent 4-mercaptobenzoic acid (4-MBA) and fluorescent rhodamine 6G (R6G) as probe molecules. The anchored nanostructured particles respond to near IR (1064 nm) as well as visible (785, 632.8 and 514 nm) excitation lasers and yield good surface enhancement in Raman signals. Enhancement factors of the order 10(6)-10(7) are determined for the analytes using a 1064 nm excitation source. Minimum detection limits based on adsorption from ethanolic solutions of 1028 M 4-MBA and aqueous solutions of 1027 M R6G are achieved. Experimental Raman frequencies and frequencies estimated by DFT calculations are in fairly good agreement. SERS imaging of the nanostructures suggests that the substrates comprising of three dimensional, highly interlinked particles are more suited than particles fused in one dimension. The high SERS activity of the branched nanoworms may be attributed to both electromagnetic and charge transfer effects.

Microwave, infrared-microwave double resonance, and theoretical studies of C2H4 center dot center dot center dot H2S complex

In this manuscript, rotational spectra of four new isotopologues of the S-H center dot center dot center dot pi bonded C2H4 center dot center dot center dot H2S complex, i.e., C2D4 center dot center dot center dot H2S, C2D4 center dot center dot center dot D2S, C2D4 center dot center dot center dot HDS, and (CCH4)-C-13 center dot center dot center dot H2S have been reported and analyzed. All isotopologues except C2D4 center dot center dot center dot HDS show a four line pattern whereas a doubling of the transition frequencies was observed for C2D4 center dot center dot center dot HDS. These results together with our previous report on the title complex M. Goswami, P. K. Mandal, D. J. Ramdass, and E. Arunan, Chem. Phys. Lett. 393(1-3), 22-27 (2004)] confirm that both subunits (C2H4 and H2S) are involved in large amplitude motions leading to a splitting of each rotational transition to a quartet. Further, the results also confirm that the motions which are responsible for the observed splittings involve both monomers. Molecular symmetry group analysis, considering the interchange of equivalent H atoms in H2S and C2H4 could explain the observed four line pattern and their intensities in the microwave spectrum. In addition, hydride stretching fundamentals of the complex were measured using coherence-converted population transfer Fourier Transform Microwave-infrared (IR-MW double resonance) experiments in the S-H and C-H stretch regions. Changes in the tunneling splittings upon vibrational excitation are consistent with the isotopic dependence of pure rotational transitions. A complexation shift of 2.7-6.5 cm(-1) has been observed in the two fundamental S-H stretching modes of the H2S monomer in the complex. Vibrational pre-dissociation in the bound S-H stretch has been detected whereas the instrument-limited line-shapes in other S-H and C-H stretches indicate slower pre-dissociation rate. Some local perturbations in the vibrational spectra have been observed. Two combination bands have been observed corresponding to both the S-H stretching fundamentals and what appears to be the intermolecular stretching mode at 55 cm(-1). The tunneling splitting involved in the rotation of C2H4 unit has been deduced to be 1.5 GHz from the IR-MW results. In addition, ab initio barrier heights derived for different motions of the monomers support the experimental results and provide further insight into the motions causing the splitting. (C) 2013 AIP Publishing LLC.

Efecto de distintos intervalos de mediciones de leche sobre la estimación de producción de leche total, repetibilidad y la forma de la curva de lactancia en un hato reyna

El presente trabajo se realizó con el objetivo de estudiar el efecto de cuatro intervalos de medición de leche (diario, cada 7, 14 y 28 días) sobre la producción de leche total, la repetibilidad y la forma de la curva de lactancia. Para lo cual se utilizaron los registros productivos y reproductivos del hato criollo Reyna de la Finca San José ubicada en Masatepe, Nicaragua. Se estudiaron 105 lactancia provenientes de 28 vacas durante el periodo de 1982 - 1990. Las características estudiadas fueron PLTOT, repetibilidad y la forma de la curva de lactancia. Todos los análisis estadísticos fueron realizados con el procedimiento de mínimos cuadrados y máxima verosimilitud establecido en el paquete estadístico LSMLMW

Producción y calidad de la biomasa de Zea mays, Sorghum bicolor, Oriza sativa en alfombra forrajera hidropónica.

Con el objetivo de evaluar los tratamientos Zea mays, Sorghum bicolor y Oriza sativa, para determinar su rendimiento y composición química, como alfombra forrajera hidropónico, se realizó un ensayo en el Invernadero del Departamento de Protección Vegetal y Forestal (DEPAF) - Universidad Nacional Agraria, Managua, ubicada en el km 12 ½ carretera norte. Como sustrato para la alfombra se utilizó heno del pasto Cubano CT - 115 (Pennisetum purpureum x P. tiphoydes). Se utilizó un Diseño Completo al Azar, con tres tratamientos y, tres repeticiones. Como unidad experimental se utilizó la cantidad de 1000 gr (1 kg) distribuida uniformemente en bandejas plástica de 0.2034 m2. Las variables de estudio fueron; rendimiento de alfombra en verde y seca, por bandeja y por metro cuadrado; porcentajes de; materia seca, proteína cruda, fibra cruda y cenizas. Se realizaron Análisis de Varianza y, separaciones de medias, usando Duncan (P<0.05). Para el análisis estadístico las variables codificadas en porcentajes se transformaron, según, 2 arco seno p (Dos veces Arco seno de la raíz cuadrada de la proporción). No hubo diferencias significativas (P>0,05) para el rendimiento por bandeja de alfombra en verde entre tratamientos, pero sí para el rendimiento (kg) por bandeja de materia seca (P<0.05) entre la producción del arroz (0.91) y sorgo (0.65), no así entre el arroz y maíz, ni entre el maíz y el sorgo. Resultados similares se encontraron para la producción por m2. No se encontraron diferencias significativas (P>0.05) entre los tres cultivos, oscilando la producción desde 23.59 a 28.35 kg/m2, para sorgo y maíz respectivamente. Se encontraron diferencias significativas (P<0.05) entre tratamientos para la producción de biomasa seca, la mayor producción la obtuvo el arroz y la menor el sorgo (4.48 y 3.22 kg/m2). La gramínea con el porcentaje de MS más alto fue el arroz (16.48), que mostró diferencias significativas (P<0,05) con respecto al sorgo y el maíz; el maíz presentó los porcentajes de MS más bajos (12.41). Respecto a la proteína cruda se encontraron diferencias significativas (P<0.05) entre los cultivos. El mayor contenido (%) se obtuvo en el sorgo (15.01) y el menor (9.76) en el arroz. Los contenidos de fibra cruda presentaron diferencias significativas (P< 0.05) entre el arroz con el maíz y sorgo, no así entre sorgo y maíz. El arroz presentó mayores contenidos (34.59 %), registrándose el menor tenor en el sorgo (19.71 %). Los contenidos de cenizas presentaron las mismas tendencias que la fibra cruda en cuanto a las diferencias estadísticas encontradas. El mayor contenido (%) de cenizas se obtuvo en el arroz (9.31) y el menor para el maíz (4.51). La alfombra forrajera hidropónica es una alternativa viable para la producción de forraje de alta calidad e inocuidad.

Efecto de distintos nutrientes sobre el rendimiento y la calidad de soja no GMO en América, provincia de Buenos Aires

Resumen: El desarrollo genético de variedades de soja en la Argentina se ha inclinado hacia la búsqueda de altos rendimientos sin tener en cuenta la calidad del grano, en cuanto a porcentaje de proteína. Por esta razón existe la necesidad de buscar prácticas de manejo que aumenten el mismo. En el presente ensayo, se evaluó el efecto de distintas estrategias de fertilización sobre el porcentaje de proteína, aceite y rendimiento de una variedad de soja no GMO y High Pro, en la localidad de América, provincia de Buenos Aires. Los tratamientos fueron: 1. Testigo, 2. 22 kg P ha-1, 3. 22 kg P ha-1 + 13.2 kg S ha-1, 4. 22 kg P ha-1 + 13.2 kg S ha-1 + 100 g B ha-1, 5. 22 kg P ha-1 + 13.2 kg S ha-1 + 100 g B ha-1 + 10 kg N ha-1, 6. 22 kg P ha-1 + 13.2 kg S ha-1 + 100 g B ha-1 + 20 kg N ha-1, 7. 22 kg P ha-1 + 13.2 kg S ha-1 + 100 g B ha-1 + 1,3 kg Zn ha-1, y 8. 44 kg P ha-1 + 26.4 kg S ha-1. Para el caso de P, S y Zn, se aplicaron al suelo un mes antes de la siembra, en cambio el B y N fueron aplicados de manera foliar en los estadios R2 y R5 del cultivo, respectivamente. El rendimiento promedió 4598 kg ha-1, el porcentaje de proteína promedió 45,1% y el de aceite 17.4%. Los tratamientos no arrojaron diferencias significativas en cuanto a rendimiento ni proteína, pero sí la aplicación de Zn, que produjo un aumento significativo en el porcentaje de aceite (10,4%).