Furosemide stimulation of parathormone in humans: role of the calcium-sensing receptor and the renin-angiotensin system

Les interactions entre les systèmes de régulation du sodium et du calcium sont encore mal comprises et leur importance clinique mérite d'être étudiée plus en détail. Les études chez l'animal ont montré qu'il existe des relations entre le taux plasmatique d'hormone parathyroïdienne (PTH) et l'aldostérone ou l'activité de la rénine. Par ailleurs, il a été démontré chez l'animal et chez l'homme que le taux sanguin de PTH augmente rapidement après une injection de furosémide, un diurétique de l'anse ce qui fait penser qu'il existe un lien entre l'effet du furosémide sur le rein et la sécrétion de PTH. Toutefois, à ce jour, le(s) mécanisme(s) impliqués dans ce lien reste(nt) encore inconnu(s). Des résultats plus récents suggèrent que l'effet du furosemide est amoindri par l'administration préalable d'un calcimimétique agissant au niveau du récepteur sensible au calcium (calcium sensing receptor). Pour explorer chez l'homme, les mécanismes possibles du lien entre PTH et effet du furosemide sur le rein, nous avons planifié une étude randomisée croisée contre placebo réalisée chez 18 volontaires sains masculins. Le but principal était d'investiguer le rôle du système rénine-angiotensine et des calcium sensing receptors. L'étude s'est donc réalisée en 2 phases pour chaque sujet. Les participants ont ainsi reçu soit du cinacalcet (60mg) soit un placebo dans une première phase et le placebo ou du cinacalcet dans la 2° phase. Dans chaque phase d'évaluation, une injection de 20 mg de furosemide a été administrée par voie intraveineuse à l'équilibre soit 3 heures après la prise du placebo ou du cinacalcet. Des échantillons de plasma ont été prélevés toutes les 15 minutes pendant 1 heure puis toutes les heures pour le dosage de PTH intacte, calcium, sodium, potassium, magnésium, phosphate, activité de la rénine plasmatique et aldostérone jusqu'à 6h après l'injection de furosémide. L'excrétion urinaire de ces mêmes électrolytes a été mesurée aux mêmes intervalles.

CFD Modelling of Direct Contact Condensation in Suppression Pools by Applying Condensation Models of Separated Flow

The condensation rate has to be high in the safety pressure suppression pool systems of Boiling Water Reactors (BWR) in order to fulfill their safety function. The phenomena due to such a high direct contact condensation (DCC) rate turn out to be very challenging to be analysed either with experiments or numerical simulations. In this thesis, the suppression pool experiments carried out in the POOLEX facility of Lappeenranta University of Technology were simulated. Two different condensation modes were modelled by using the 2-phase CFD codes NEPTUNE CFD and TransAT. The DCC models applied were the typical ones to be used for separated flows in channels, and their applicability to the rapidly condensing flow in the condensation pool context had not been tested earlier. A low Reynolds number case was the first to be simulated. The POOLEX experiment STB-31 was operated near the conditions between the ’quasi-steady oscillatory interface condensation’ mode and the ’condensation within the blowdown pipe’ mode. The condensation models of Lakehal et al. and Coste & Lavi´eville predicted the condensation rate quite accurately, while the other tested ones overestimated it. It was possible to get the direct phase change solution to settle near to the measured values, but a very high resolution of calculation grid was needed. Secondly, a high Reynolds number case corresponding to the ’chugging’ mode was simulated. The POOLEX experiment STB-28 was chosen, because various standard and highspeed video samples of bubbles were recorded during it. In order to extract numerical information from the video material, a pattern recognition procedure was programmed. The bubble size distributions and the frequencies of chugging were calculated with this procedure. With the statistical data of the bubble sizes and temporal data of the bubble/jet appearance, it was possible to compare the condensation rates between the experiment and the CFD simulations. In the chugging simulations, a spherically curvilinear calculation grid at the blowdown pipe exit improved the convergence and decreased the required cell count. The compressible flow solver with complete steam-tables was beneficial for the numerical success of the simulations. The Hughes-Duffey model and, to some extent, the Coste & Lavi´eville model produced realistic chugging behavior. The initial level of the steam/water interface was an important factor to determine the initiation of the chugging. If the interface was initialized with a water level high enough inside the blowdown pipe, the vigorous penetration of a water plug into the pool created a turbulent wake which invoked the chugging that was self-sustaining. A 3D simulation with a suitable DCC model produced qualitatively very realistic shapes of the chugging bubbles and jets. The comparative FFT analysis of the bubble size data and the pool bottom pressure data gave useful information to distinguish the eigenmodes of chugging, bubbling, and pool structure oscillations.

Pulssitettu laserablaatio mikrofluidisten kanavistojen sarjatuotantomenetelmänä

Puolijohteiden yleistyttyä vuodesta 1948 alkaen, ovat elektroniset laitteet pienentyneet jatkuvasti tehojen kuitenkin kasvaessa. Kasvaneet tehotiheydet kuitenkin vaikeuttavat laitesuunnittelua, sillä puoljohdekomponenttien suorituskyvylle ja eliniälle on oleellista lämpötilojen ja lämpötilavaihteluiden minimointi. Perinteisen ilmajäähdytyksen lähestyessä rajojaan niin kokonaistehon kuin järkevän energiatehokkuudenkin suhteen, on parhaaksi seuraavaksi teknologiaksi ennustettu kaksifaasijäähdytystä, jonka suorituskyky ja energiatehokkuus ovat vaaditulla tasolla. Kaksifaasijäähdytyksen optimaaliselle toiminnalle tärkeää on hyvin suunniteltu ja tarkasti valmistettu lämmönsiirtopinta, jota kutsutaan mikrokanavistoksi. Pulssitettu laserkaiverrus on edistynyt valmistustekniikka, jonka tarkkuus ja luotettavuus sopisivat mikrokanavistojen valmistamiseen. Laserkaiverruksella saavutettavat lopputulokset vaihtelevat kuitenkin materiaalista riippuen ja kupari – jota käytetään yleisesti lämmönjohteena – on eräs huonoimmin lasertyöstöön reagoivista materiaaleista ja siksi on oleellista selvittää laser-kaiverruksen toimivuutta kuparisten mikrokanavistojen valmistuksessa. Pulssitetun laser-kaiverruksen eri variaatioista nanosekunti-luokan pulssinpituuksilla toimivat laitteet ovat jatkuvan tuotannon kannalta paras vaihtoehto niiden hyvän tuottavuuden, saatavuuden sekä kohtuullisen alkuinvestoinnin vuoksi. Käytännön kaiverruskokeiden perusteella selvisi, että menetelmä on laatunsa ja tarkkuutensa puolesta sopiva varsinaiseen tuotantoon. Kaiverruksen tehokkuus kuparia työstettäessä on kuitenkin ennakoituakin heikompi ja niin valmistus- kuin suunnitelu-prosessikin vaativat vielä jatkotutkimusta ja -kehitystä.

Organizational commitment and perceived relatedness as correlates of the intention to continue officiating in track and field

The objectives of the present study were to explore three components of organizational commitment (affective [AC], normative [NC] and continuance [CC] commitment; Allen & Meyer, 1991), perceived relatedness (Oeci & Ryan, 1985; 2002), and behavioural intention (Ajzen, 2002) within the context of volunteer track and field officiating. The objectives were examined in a 2-phase study. Ouring phase 1, experts (N = 10) with domain familiarity assessed the item content relevance and representation of modified organizational commitment (OC; Meyer, Allen & Smith, 1993) and perceived relatedness (La Guardia, Oeci, Ryan & Couchman, 2000) items. Fourteen of 26 (p < .05) items were relevant (Aiken's coefficient V) and NC (M = 3.88, SO = .64), CC (M = 3.63, SD = .52), and relatedness (M = 4.00, SD = .93) items had mean item content-representation ratings of either "good" or "very good" while AC (M = 2.50, SD = 0.58) was rated "fair". Participants in phase 2 (N = 80) responded to items measuring demographic variables, perceptions of OC to Athletics Canada, perceived relatedness to other track and field officials, and a measure of intention (yiu, Au & Tang, 2001) to continue officiating. Internal consistency reliability estimates (Cronbach's (1951) coefficient alpha) were as follows: (a) AC = .78, (b) CC = .85, (c) NC = .80 (d) perceived relatedness = .70 and, (e) intention = .92 in the present sample. Results suggest that the track and field officials felt only minimally committed to Athletics Canada (AC M = 3.90, SD = 1.23; NC M = 2.47, SD = 1.25; CC M = 3.32; SD = 1.34) and that their relationships with other track and field officials were strongly endorsed (M = 5.86, SD = 0.74). Bivariate correlations (Pearson r) indicated that perceived relatedness to other track and field officials demonstrated the strongest relationship with intention to continue officiating (r = .346, p < .05), while dimensions of OC were not significantly related to intention (all p's > .05). Together perceived relatedness (j3 = .339, p = .004), affective commitment (j3 = -.1 53, p = .308), normative commitment (j3 = -.024, p = .864) and continuance commitment (j3 = .186, P = .287) contribute to the prediction of intention to continued officiating (K = .139). These relationships remained unaffected by the inclusion of demographic (j3age = -.02; P years with Athletics Canada = -.13; bothp's > .05) or alternative commitment (j3sport = -.19; P role = .15; Pathletes = .20; all p' s > .05) considerations. Three open-ended questions elicited qualitative responses regarding participants' reasons for officiating. Responses reflecting initial reasons for officiating formed these higher order themes: convenience, helping reasons, extension of role, and intrinsic reasons. Responses reflecting reasons for continuing to officiate formed these higher order themes: track and field, to help, and personal benefits. Responses reflecting changes that would influence continued involvement were: political, organizational/structural, and personal. These results corroborate the findings of previous investigations which state that the reasons underpinning volunteer motivations change over time (Cuskelly et al., 2002). Overall, the results of this study suggest that track and field officials feel minimal commitment to the organization of Athletics Canada but a stronger bond with their fellow officials. Moreover, the degree to which track and field officials feel meaningfully connected to one another appears to exert a positive influence on their intentions to continue officiating. As such, it is suggested that in order to promote continued involvement, Athletics Canada increases its focus on fostering environments promoting positive interactions among officials.

Structural effects of neutral lipids on the divalent cation-induced interactions of phosphatidylserine - containing bilayers

As Ca2+ and phosphatidylserine (PS) are known to induce the adhesion of bilayer vesicles and form collapsed multibilayer structures in vitro, it was the aim of this study to examine how that interaction and the resultant structures might be modified by neutral lipid species. X-ray diffraction data from multilamellar systems suggest that phosphatidylcholine (PC) and diacylglycerol (DG) might be in the collapsed phase up to a concentration of -30 mole % and that above this concentration these neutral lipids may modify Ca2+-induced bilayer interactions. Using large unilamellar vesicles and long incubations in excess Ca2+ to ensure equilibration, similar preliminary results were again obtained with PC, and also with phosphatidylethanolamine (PE). A combination of X-ray diffraction, thin-layer chromatography, density gradient centrifugation and freeze-fracture electron microscopy, used in conjunction with an osmotic stress technique, showed that (i) -30 mole % PC can be accomodated in the Ca(DOPS)2 phase; and (ii) higher PC levels modify Ca2+-induced bilayer interactions resulting in single lamellar phases of larger dimension and reduced tendency for REV collapse. Importantly, the data suggest that PC is dehydrated during the rapid collapse process leading. to Ca(DOPS)2 formation and exists with this dehydrated phase. Similar results were obtained using PS isolated from bovine brain. Preliminary studies using two different phosphatidylethanolamine (PE) species indicated accomodation by Ca(DOPS)2 of -25-30 mole 0/0 PE and bulk phase separation, of species favouring a non-bilayer phase, at higher levels. Significantly, all PS/PE vesicles appear to undergo a complete Ca2+-induced collapse, even with contents of up to 90 mole % PE. These data suggest that PE may have an important role in fusion mechanisms in vivo. In sum the data lend both structural and stoichiometric evidence for th~ existence of laterally segregated neutral lipid molecules within the same bilayers as PS domains exposed to Ca2+.

Hydrogen adsorption in a copper ZSM5 zeolite: an inelastic neutron scattering study

Currently microporous oxidic materials including zeolites are attracting interest as potential hydrogen storage materials. Understanding how molecular hydrogen interacts with these materials is important in the rational development of hydrogen storage materials and is also challenging theoretically. In this paper, we present an incoherent inelastic neutron scattering (INS) study of the adsorption of molecular hydrogen and hydrogen deuteride (HD) in a copper substituted ZSM5 zeolite varying the hydrogen dosage and temperature. We have demonstrated how inelastic neutron scattering can help us understand the interaction of H-2 molecules with a binding site in a particular microporous material, Cu ZSM5, and by implication of other similar materials. The H-2 molecule is bound as a single species lying parallel with the surface. As H-2 dosing increases, lateral interactions between the adsorbed H-2 molecules become apparent. With rising temperature of measurement up to 70 K (the limit of our experiments), H-2 molecules remain bound to the surface equivalent to a liquid or solid H-2 phase. The implication is that hydrogen is bound rather strongly in Cu ZSM5. Using the simple model for the anisotropic interaction to calculate the energy levels splitting, we found that the measured rotational constant of the hydrogen molecule is reduced as a consequence of adsorption by the Cu ZSM5. From the decrease in total signal intensity with increasing temperature, we were able to observe the conversion of para-hydrogen into ortho-hydrogen at paramagnetic centres and so determine the fraction of paramagnetic sites occupied by hydrogen molecules, ca. 60%. (c) 2006 Elsevier B.V. All rights reserved.

Non-stationary frequency analysis of extreme daily rainfall in Sao Paulo, Brazil

This work is an assessment of frequency of extreme values (EVs) of daily rainfall in the city of Sao Paulo. Brazil, over the period 1933-2005, based on the peaks-over-threshold (POT) and Generalized Pareto Distribution (GPD) approach. Usually. a GPD model is fitted to a sample of POT Values Selected With a constant threshold. However. in this work we use time-dependent thresholds, composed of relatively large p quantities (for example p of 0.97) of daily rainfall amounts computed from all available data. Samples of POT values were extracted with several Values of p. Four different GPD models (GPD-1, GPD-2, GPD-3. and GDP-4) were fitted to each one of these samples by the maximum likelihood (ML) method. The shape parameter was assumed constant for the four models, but time-varying covariates were incorporated into scale parameter of GPD-2. GPD-3, and GPD-4, describing annual cycle in GPD-2. linear trend in GPD-3, and both annual cycle and linear trend in GPD-4. The GPD-1 with constant scale and shape parameters is the simplest model. For identification of the best model among the four models WC used rescaled Akaike Information Criterion (AIC) with second-order bias correction. This criterion isolates GPD-3 as the best model, i.e. the one with positive linear trend in the scale parameter. The slope of this trend is significant compared to the null hypothesis of no trend, for about 98% confidence level. The non-parametric Mann-Kendall test also showed presence of positive trend in the annual frequency of excess over high thresholds. with p-value being virtually zero. Therefore. there is strong evidence that high quantiles of daily rainfall in the city of Sao Paulo have been increasing in magnitude and frequency over time. For example. 0.99 quantiles of daily rainfall amount have increased by about 40 mm between 1933 and 2005. Copyright (C) 2008 Royal Meteorological Society

A geometric mass-preserving redistancing scheme for the level set function

In this paper we describe and evaluate a geometric mass-preserving redistancing procedure for the level set function on general structured grids. The proposed algorithm is adapted from a recent finite element-based method and preserves the mass by means of a localized mass correction. A salient feature of the scheme is the absence of adjustable parameters. The algorithm is tested in two and three spatial dimensions and compared with the widely used partial differential equation (PDE)-based redistancing method using structured Cartesian grids. Through the use of quantitative error measures of interest in level set methods, we show that the overall performance of the proposed geometric procedure is better than PDE-based reinitialization schemes, since it is more robust with comparable accuracy. We also show that the algorithm is well-suited for the highly stretched curvilinear grids used in CFD simulations. Copyright (C) 2010 John Wiley & Sons, Ltd.

An improved finite element space for discontinuous pressures

We consider incompressible Stokes flow with an internal interface at which the pressure is discontinuous, as happens for example in problems involving surface tension. We assume that the mesh does not follow the interface, which makes classical interpolation spaces to yield suboptimal convergence rates (typically, the interpolation error in the L(2)(Omega)-norm is of order h(1/2)). We propose a modification of the P(1)-conforming space that accommodates discontinuities at the interface without introducing additional degrees of freedom or modifying the sparsity pattern of the linear system. The unknowns are the pressure values at the vertices of the mesh and the basis functions are computed locally at each element, so that the implementation of the proposed space into existing codes is straightforward. With this modification, numerical tests show that the interpolation order improves to O(h(3/2)). The new pressure space is implemented for the stable P(1)(+)/P(1) mini-element discretization, and for the stabilized equal-order P(1)/P(1) discretization. Assessment is carried out for Poiseuille flow with a forcing surface and for a static bubble. In all cases the proposed pressure space leads to improved convergence orders and to more accurate results than the standard P(1) space. In addition, two Navier-Stokes simulations with moving interfaces (Rayleigh-Taylor instability and merging bubbles) are reported to show that the proposed space is robust enough to carry out realistic simulations. (c) 2009 Elsevier B.V. All rights reserved.

Front tracking with moving-least-squares surfaces

The representation of interfaces by means of the algebraic moving-least-squares (AMLS) technique is addressed. This technique, in which the interface is represented by an unconnected set of points, is interesting for evolving fluid interfaces since there is]to surface connectivity. The position of the surface points can thus be updated without concerns about the quality of any surface triangulation. We introduce a novel AMLS technique especially designed for evolving-interfaces applications that we denote RAMLS (for Robust AMLS). The main advantages with respect to previous AMLS techniques are: increased robustness, computational efficiency, and being free of user-tuned parameters. Further, we propose a new front-tracking method based on the Lagrangian advection of the unconnected point set that defines the RAMLS surface. We assume that a background Eulerian grid is defined with some grid spacing h. The advection of the point set makes the surface evolve in time. The point cloud can be regenerated at any time (in particular, we regenerate it each time step) by intersecting the gridlines with the evolved surface, which guarantees that the density of points on the surface is always well balanced. The intersection algorithm is essentially a ray-tracing algorithm, well-studied in computer graphics, in which a line (ray) is traced so as to detect all intersections with a surface. Also, the tracing of each gridline is independent and can thus be performed in parallel. Several tests are reported assessing first the accuracy of the proposed RAMLS technique, and then of the front-tracking method based on it. Comparison with previous Eulerian, Lagrangian and hybrid techniques encourage further development of the proposed method for fluid mechanics applications. (C) 2008 Elsevier Inc. All rights reserved.

Oxide surface modification: Synthesis and characterization of zirconia-coated alumina

Four aluminas were used as Supports for impregnation with a zirconium oxide with the aim to achieve a coating, without phase separation, between Support and modifier. The Supports were impregnated with different concentrations Of zirconium aqueous resin, obtained through the polymeric precursor method. After impregnation the samples were calcined and then characterized by XRD, which led to identification of crystalline zirconia in different concentrations from each support used. Using a simple geometric model the maximum amount Of Surface modifier Oxide required for the complete coating of a support with a layer of unit cells was estimated. According to this estimate, only the support should be identified below the limit proposed and crystalline zirconium oxide Should be identified above this limit when a complete coating is reached. The results obtained From XRD agree with the estimated values and to confirm the coating, the samples were also characterized by EDS/STEM, HRTEM, XPS, and XAS. The results showed that the zirconium oxide oil the Surface of alumina Support reached the coating in the limit of 15 Zr nm(-2), without the formation of the ZrO(2) phase. (c) 2009 Elsevier Inc. All rights reserved.

A New Insight on the Preparation of Stabilized Alpha-Nickel Hydroxide Nanoparticles

Nickel hydroxide can provide an outstanding cathode material in alkaline secondary batteries, however the progressive decrease of the charge capacity as a function of the number of oxidation/reduction cycles is a challenging problem to be solved. New improvements on the electrochemical properties of electrode materials can be achieved by exploiting the much better performance of alpha-nickel hydroxide. Such materials were obtained in a stable form by sol-gel method and characterized by thermogravimetric analyses, UV-Vis spectroscopy, X-ray diffractometry, scanning and transmission electron microscopy, cyclic voltammetry and electrochemical quartz crystal microbalance techniques. The results revealed not only the formation of the alpha-Ni(OH)(2) phase, but also a much better electrochemical reversibility and stability as compared with similar materials obtained by electrochemical precipitation method.

Evaluation of anti-inflammatory activity of derivatives from aerial parts of Baccharis uncinella

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Validação de protocolo de assistência para pessoas com úlcera venosa na atenção primária

People with venous ulcers constitute as an important public health problem, its treatment is onerous and require assistance provided by trained professionals, systematized through protocols, however what lies in the assistance is that the management of this group of people differs from that preconized in the scientific literature, interfering with wound healing and quality of life of affected. In this sense, the construction of a assistance protocol specific to people with venous ulcers (VU) can help professionals of the Family Health Strategy both in patient assessment as and in establishment of quality assistance. Thus, this study aimed to analyse the validity of a multiprofessional assistance protocol for people with venous ulcers in primary care by health professionals using Delphi technique. This is a quantitative study, the methodological type conducted in two steps: first step related to integrative literature review to subsidize the development of the protocol, then these aspects were organized and proposed to the judges of the study through the Delphi technique. The study was initiated after approval by the Research Ethics Committee. The first step was performed between August and September 2012, in the virtual library of health, in the page of the Coordination of Improvement of Higher Education Personnel, of Municipal Health Secretariat and international guidelines of associations and in the subsequent step carried out between September 2012 to January 2013, was performed search by Lattes platform of the National Council of Technological and Scientific Development, in order to identify health professionals in Brazil who act as judges of the instrument and then, via online, the form was submitted to them.The sample for the second step was 51 judges in the first round and 35 for the second round Delphi. The analysis was done by adopting Kappa index ≥ 0.81 and Content Validity Index (CVI)> 0.80. In the first submission for the judges, items that did not reach Kappa and CVI established were: request / realization / test results, demographic data, medical history, risk factors, verification of pain / vital signs / pulse / infection signs / lesion location/ edema and pain treatment. After removal of items which have not obtained Kappa or CVI index established, it was found achieving optimal levels of these index for the categories. In the next step was the ressubmissão of protocol to judges through the Delphi technique in it was found that, of the 15 categories of the protocol, 12 presented higher scores in Delphi 2 phase and the other three categories remained the same Kappa and IVC of the previous phase. As for the average of evaluation requirements of the protocol was found that the scores assigned by the judges were higher in the second phase in nine of the 10 items, remaining the same in only one of the items indicating validity of the instrument before the consensus of the judges. Thus, we accepted the alternative hypothesis in this study, as they were obtained in the second Delphi phase the validity index greater than or equal to the Delphi 1 phase. The formulation of this assistance protocol valid and reproducible will enable a reorganization and redesign of assistance, with standardization of actions and continuity of care for persons with venous ulcers in primary health care

Avrami exponent of crystallization in tellurite glasses

Nucleation process and crystal growth for three samples of the (20-x)Li(2)O-80TeO(2)-xWO(3) glass system were studied using X-ray diffraction and differential scanning calorimetry techniques. X-ray diffraction data confirmed the amorphous characteristic of the as-quenched samples and indicated the growth of crystalline phases formed due to the thermal treatment for annealed samples. These results reveal the presence of three distinct gamma-TeO(2), alpha-TeO(2) and alpha-Li(2)Te(2)O(5) crystalline phases in the TL sample, and two distinct alpha-TeO(2) and gamma-TeO(2) crystalline phases in the TLW5 and TLW10 samples. The activation energy and the Avrami exponent were determined from DSC measurements. The activation energy values X-ray diffraction data of the TLW10 glass sample suggest that gamma-TeO(2) phase occur before the alpha-TeO(2). The results obtained for the Avrami exponent point to that the nucleation process is volumetric and that the crystal growth is two or three-dimensional.