Upper and lower bounds of 180 degrees unit element of a ridge waveguide: Calculations and measurements

The upper and lower bounds on the actual solution of any microwave structure is of general interest. The purpose of this letter is to compare some calculations using the mode-matching and finite-element methods, with some measurements on a 180 degrees ridge waveguide insert between standard WR62 rectangular waveguides. The work suggests that the MMM produces an upper bound, while the FEM places a lower bound on the measurement. (C) 2001 John Wiley & Sons, Inc.

Ground-based detection of thermal emission from the exoplanet WASP-19b

We present an occultation of the newly discovered hot Jupiter system WASP-19, observed with the High Acuity Wide-field K-band Imager instrument on the VLT, in order to measure thermal emission from the planet's dayside at ~2µm. The light curve was analysed using a Markov Chain Monte Carlo method to find the eclipse depth and the central transit time. The transit depth was found to be 0.366 +/- 0.072 per cent, corresponding to a brightness temperature of 2540 +/- 180 K. This is significantly higher than the calculated (zero-albedo) equilibrium temperature and indicates that the planet shows poor redistribution of heat to the night side, consistent with models of highly irradiated planets. Further observations are needed to confirm the existence of a temperature inversion and possibly molecular emission lines. The central eclipse time was found to be consistent with a circular orbit.

A Geostatistical Investigation into Changing Permeability of Sandstones During Weathering Simulations

The ability to predict the behavior of masonry materials is crucial to conserve building stone. Natural stone, such as sandstone, is not immune from the processes of weathering in the built environment and suffers from decay by granular disintegration, contour scaling, and multiple flaking. Spatial variation of rock properties is a major contributing factor to inconsistent responses to weathering. This has implications for moisture movement and salt input and output and storage, and results in unpredictability in the decay dynamics of masonry materials. This article explores the use of variography and kriging to investigate the spatial interactions between the trigger factors of stone decay, in particular, permeability and its effect on salt penetration. Sandstone blocks were used to represent fresh building stones from a weathering perspective and gave baseline characteristics for the interpretation of subsequent deterioration and decay pathways. Simulated weathering trials involved preloading a sandstone block with salt and subjecting a separate block to 20 cycles of a weathering trial designed to simulate a temperate weathering regime. Geostatistical analysis indicated differences in the spatial variation of permeability of the fresh rock and that subjected to the weathering regimes. Spatial prediction and visualization showed differences in the spatial continuity of permeability in a horizontal and vertical direction through the preloaded block after salt weathering. Continual wetting with salt and alternate heating increased permeability in a vertical direction, enabling the ingress and movement of salt and moisture more effectively through the stone.

Children with cerebral palsy: severity and trends over time

Increasingly, more very-low-birthweight infants in the developed world are now expected to survive the neonatal period than was previously the case. There are concerns that there may be a related increase in the number of infants developing severe sensorimotor impairments. Pooled data from five registers contributing to the UK Network of Cerebral Palsy Registers, Surveys and Databases were used to identify patterns of motor impairment in relation to additional impairments and to birthweight, and to assess whether prevalence of cerebral palsy (CP) by birthweight and by severity of motor impairment had changed over time. Low-birthweight infants are at greater risk of developing CP than larger-birthweight babies. The CP rate amongst children with birthweights <2500 g was significantly higher at 16 per 1000 livebirths [95% confidence interval (CI) 14.9, 16.2] than 1.2 per 1000 livebirths [95% CI 11, 1.2] for normal-birthweight children. Despite being at greater risk of developing CP, smaller-birthweight babies are proportionately less likely to develop the most severe forms of motor impairment. Of those born weighing ≥2500 g, 23% compared with 15% weighing <1000 g (P < 0.001) were in the most severely motor impaired group. Severe motor impairment is associated with higher levels of additional impairments. CP rates for each motor impairment group in the 1990s were similar to those in the late 1970s. Rates of CP among infants born below normal birthweight are high but have decreased over time. The CP rate for infants weighing 1000–1499 g at birth decreased from around 180 per 1000 livebirths in 1979 to around 50 per 1000 livebirths from the early 1990s onwards.

Family caregivers' ideal expectations of Canada's Compassionate Care Benefit

We present the findings of 57 interviews conducted in 2007-2008 with Canadians who have cared for a dying family member to examine their ideal expectations of the Compassionate Care Benefit (CCB) - a social programme providing job security and income support for workers caring for a dying person. Our aims are to (1) appreciate how intended users and other family caregivers view the programme's very nature; (2) identify programme challenges and improvements that emerge from considering family caregivers' ideal expectations; and (3) contribute to a larger evaluative study designed to make policy-relevant recommendations for CCB improvement. Review of transcripts across three respondent groups reveals four categories of ideal expectations: (1) eligibility, (2) informational, (3) timing and (4) financial. Ideal expectations were typically derived from respondents' experiences of care-giving, their knowledge of the programme and, for some, of applying for and/or receiving the CCB. Findings reveal that there are gaps between respondents' ideal expectations and their experienced realities. Such gaps may lead to disappointment being experienced by those who believe they should be eligible for the programme but are not, or should be entitled to receive some form of support that is not presently available. This analysis plays an important role in identifying potential changes for the CCB that may better support family caregivers, in that the ideal expectations serve as a starting point for articulating desirable programme amendments. This analysis also has wider relevance. For jurisdictions looking to create new social programmes to support caregivers based upon labour policy strategies and legislation, this analysis identifies considerations that should be made at the outset of development. For jurisdictions that already have employment-based caregiver support programmes, this analysis demonstrates that programme challenges may not always be met through legislative changes alone but also through measures such as increasing awareness. © 2011 Blackwell Publishing Ltd.

Ordered 180 degrees ferroelectric domains in epitaxial submicron structures

Large range ordered La(0.7)Sr(0.3)MnO(3) and SrRuO(3) epitaxial dots were fabricated by pulsed laser deposition using stencil masks and were embedded in ferroelectric PbTiO(3) epitaxial films. PbTiO(3) films grown on top of La(0.7)Sr(0.3)MnO(3) dots form arrays of 180 degrees domains that are switchable and have good ferroelectric properties. PbTiO(3) films made on top of SrRuO(3) dots have a monodomain polarization state. These observations point out the importance of the electronic properties of the bottom electrode in the selection of a preferential polarization state in epitaxial ferroelectric films and propose a route of fabricating large arrays of switchable 180 degrees ferroelectric domains. (C) 2011 American Institute of Physics. [doi:10.1063/1.3630232]

A low-cost digital image correlation technique for characterising the shear deformation of fabrics for draping studies

A novel digital image correlation (DIC) technique has been developed to track changes in textile yarn orientations during shear characterisation experiments, requiring only low-cost digital imaging equipment. Fabric shear angles and effective yarn strains are calculated and visualised using this new DIC technique for bias extension testing of an aerospace grade, carbon-fibre reinforcement material with a plain weave architecture. The DIC results are validated by direct measurement, and the use of a wide bias extension sample is evaluated against a more commonly used narrow sample. Wide samples exhibit a shear angle range 25% greater than narrow samples and peak loads which are 10 times higher. This is primarily due to excessive yarn slippage in the narrow samples; hence, the wide sample configuration is recommended for characterisation of shear properties which are required for accurate modelling of textile draping.

The fate of 14C-naphthalene in soil microcosms containing Scots pine seedlings and enchytraeids

The fate of freshly spiked and aged ¹⁴C-naphthalene associated residues as investigated in the presence and absence of ectomycorrhizal Scots pine seedlings and enchytraeid worms, in a factorial experimental design. Microcosms were used which enabled the ¹⁴C-labelled naphthalene associated residues to be quantified, including plant lipids which acted as an additional naphthalene sink within the microcosms. The presence of plant roots altered the availability of the ¹⁴C-naphthalene and associated residues to degrading microbes. Mineralisation and volatilisation of ¹⁴C naphthalene in freshly spiked soil were lower in the presence of Scots pine. Conversely, in soil aged for 180 d, Scots pine increased mineralisation, and bioavailability of naphthalene. Root-mediated processes, microbial activity and enchytraeids interact with desorption, bioavailability and mineralisation of naphthalene. © 2006 Elsevier Ltd. All rights reserved.

Perceived difficulty of various steps of manual small incision cataract surgery among trainees in rural China

Background: The perceived difficulty of steps of manual small incision cataract surgery among trainees in rural China was assessed. Design: Cohort study. Participants: Fifty-two trainees at the end of a manual small incision cataract surgery training programme. Methods: Participants rated the difficulty of 14 surgical steps using a 5-point scale, 1 (very easy) to 5 (very difficult). Demographic and professional information was recorded for trainees. Main Outcome Measure: Mean ratings for surgical steps. Results: Questionnaires were completed by 49 trainees (94.2%, median age 38 years, 8 [16.3%] women). Twenty six (53.1%) had performed ≤50 independent cataract surgeries prior to training. Trainees rated cortical aspiration (mean score±standard deviation=3.10±1.14) the most difficult step, followed by wound construction (2.76±1.08), nuclear prolapse into the anterior chamber (2.74±1.23) and lens delivery (2.51±1.08). Draping the surgical field (1.06±0.242), anaesthetic block administration (1.14±0.354) and thermal coagulation (1.18±0.441) were rated easiest. In regression models, the score for cortical aspiration was significantly inversely associated with performing >50 independent manual small incision cataract surgery surgeries during training (P=0.01), but not with age, gender, years of experience in an eye department or total number of cataract surgeries performed prior to training. Conclusions: Cortical aspiration, wound construction and nuclear prolapse pose the greatest challenge for trainees learning manual small incision cataract surgery, and should receive emphasis during training. Number of cases performed is the strongest predictor of perceived difficulty of key steps. © 2013 Royal Australian and New Zealand College of Ophthalmologists.

Informe de seguimiento No.1: Ejecución de las obras de valorización (Acuerdo 180 de 2005)

Gestión del conocimiento

Informe de seguimiento No.2: Ejecución de las obras de valorización (Acuerdo 180 de 2005)

Gestión del conocimiento

Informe de seguimiento No.3: Ejecución de las obras de valorización (Acuerdo 180 de 2005)

Gestión del conocimiento