Rickettsial infection in Amblyomma nodosum ticks (Acari: Ixodidae) from Brazil

The rickettsial infections in 174 Amblyomma nodosum found on passeriform birds in the Atlantic forest, eastern Brazil, have recently been evaluated. Rickettsiae were successfully isolated from two ticks, using cultures of Vero cells. Both isolates were molecularly characterised, using the rickettsial genes gltA and htrA and, when possible, also ompA and ompB. Portions of the gltA and htrA genes from one of the rickettsial isolates were found be closely match the corresponding GenBank sequences for Rickettsia bellii, with 99.9% and 100% homology, respectively. This isolate was named R. bellii strain Pontal. Portions of the gltA, htrA and ompB genes from the second isolate most closely matched the corresponding sequences of R. parkeri, whereas a portion of the ompA gene from this isolate was closest to the relevant sequence of Rickettsia sp. strain COOPERI (which has been considered to be a strain of R. parkeri in Brazil). The second isolate was named R. parkeri strain NOD. Further investigation of the 172 ticks from which isolates were not recovered revealed R. parkeri strain NOD in 40 and R. bellii strain Pontal in nine, giving overall infection prevalences of 23.6% (41/174) and 5.7% (10/174), respectively. This appears to be the first report of R. bellii and R. parkeri in A. nodosum.

Root Canal Area Increase Promoted by the EndoSequence and ProTaper Systems: Comparison by Computed Tomography

Introduction: The aim of this study was to compare the increase of the root canal area after instrumentation with EndoSequence or ProTaper rotary systems. Methods: Twenty-two mesial root canals from mandibular molars were instrumented. Teeth were mounted on a base, numbered, and divided into 2 groups; teeth from 1-11 (PT group) were instrumented by using the ProTaper system, and teeth from 12-22 (ES group) were instrumented by using the EndoSequence system. Cone beam computed tomography was performed on all teeth before and after instrumentation. Measurements at 3,5, and 7 mm as well as differences in instrument performance were statistically compared by the Student t test at 5% significance level. Results: Both systems increased significantly the root canal area (P < .05) at all levels. Comparison between the rotary systems showed significantly greater increase (P < .05) for EndoSequence at 3 mm, with no statistically significant difference (P < .05) at the other levels. Conclusions: Both rotary systems increased significantly the root canal area. (J Endod 2010;36:1179-1182)

Revitaliza????o do Museu do ??ndio

Este programa refere-se ?? reorganiza????o do Museu do ??ndio no Rio de Janeiro. Foram desenvolvidas a????es para modernizar sua estrutura organizacional, recuperar o espa??o f??sico, reequipar seus diversos servi??os e se????es, inventariar e processar tecnicamente os diferentes tipos de acervo, criar uma rede informatizada para agilizar os trabalhos e recuperar informa????es. Este projeto visa tamb??m revitalizar o Museu enquanto espa??o cient??fico cultural, voltado para a divulga????o da tem??tica ind??gena junto ao grande p??blico e para o estudo e conhecimento das diferentes sociedades ind??genas

Fatores que inibem a institucionalização do orçamento como ferramenta de controle gerencial em uma IFES

Este estudo aborda o tema orçamento como ferramenta de controle gerencial em uma Instituição Federal de Ensino Superior (IFES), cujo objetivo da pesquisa foi investigar, descrever e analisar os fatores que inibem a institucionalização do orçamento como ferramenta de controle gerencial em uma IFES. A questão de pesquisa é quais os fatores que inibem a institucionalização do orçamento como ferramenta de controle gerencial em uma IFES? Desta forma, a compreensão do problema norteou a opção por um estudo de caso, com uma abordagem qualitativa, com objetivos descritivo e exploratório, utilizando como procedimentos técnicos de coleta de dados a observação não participante, entrevista semi estruturada e analise documental. O levantamento dos dados deu-se nos meses de dezembro de 2013 a março de 2014. Como técnica de análise de dados foi utilizada a técnica de Análise de Conteúdo de Bardin (1977, 2004) desenvolvida nos meses abril a junho de 2014. A pesquisa teve como referenciais teóricos, a literatura de Orçamento com trabalhos de Frezatti et al., (2008) e Covaleski et al., (2003) e a Teoria Institucional com a contribuição de trabalhos de autores como Burns e Scapens (2000) e Dimaggio e Powell, (1983, 2007). Entretanto, cabe destacar que a literatura principal utilizada foi a de Frezatti et al., (2011) onde foram analisadas oito categorias impactantes ao processo orçamentário. Na análise dos dados, foi analisado o processo orçamentário nos planos teórico e real, foi verificado os estágios de institucionalização das etapas e funções do processo orçamentário e foi observado oito categorias de análise com 27 fatores impactantes a institucionalização do orçamento. Como conclusão, foi verificado 16 fatores inibidores, tais como: Comunicação Top Down, Dados Históricos, Impessoalidade e que o orçamento na IFES ainda não foi institucionalizado como ferramenta de controle gerencial. É apenas um “critério cerimonial de valor” que estabiliza e legitima a gestão da universidade frente à comunidade acadêmica e aos órgãos de controle externo.

O impacto energético e as emissões de CO2 dos veículos eléctricos em Portugal

Para a diminuição da dependência energética de Portugal face às importações de energia, a Estratégia Nacional para a Energia 2020 (ENE 2020) define uma aposta na produção de energia a partir de fontes renováveis, na promoção da eficiência energética tanto nos edifícios como nos transportes com vista a reduzir as emissões de gases com efeito de estufa. No campo da eficiência energética, o ENE 2020 pretende obter uma poupança energética de 9,8% face a valores de 2008, traduzindo-se em perto de 1800 milhões de tep já em 2015. Uma das medidas passa pela aposta na mobilidade eléctrica, onde se prevê que os veículos eléctricos possam contribuir significativamente para a redução do consumo de combustível e por conseguinte, para a redução das emissões de CO2 para a atmosfera. No entanto, esta redução está condicionada pelas fontes de energia utilizadas para o abastecimento das baterias. Neste estudo foram determinados os consumos de combustível e as emissões de CO2 de um veículo de combustão interna adimensional representativo do parque automóvel. É também estimada a previsão de crescimento do parque automóvel num cenário "Business-as-Usual", através dos métodos de previsão tecnológica para o horizonte 2010-2030, bem como cenários de penetração de veículos eléctricos para o mesmo período com base no método de Fisher- Pry. É ainda analisado o impacto que a introdução dos veículos eléctricos tem ao nível dos consumos de combustível, das emissões de dióxido de carbono e qual o impacto que tal medida terá na rede eléctrica, nomeadamente no diagrama de carga e no nível de emissões de CO2 do Sistema Electroprodutor Nacional. Por fim, é avaliado o impacto dos veículos eléctricos no diagrama de carga diário português, com base em vários perfis de carga das baterias. A introdução de veículos eléctricos em Portugal terá pouca expressão dado que, no melhor dos cenários haverão somente cerca de 85 mil unidades em circulação, no ano de 2030. Ao nível do consumo de combustíveis rodoviários, os veículos eléctricos poderão vir a reduzir o consumo de gasolina até 0,52% e até 0,27% no consumo de diesel, entre 2010 e 2030, contribuindo ligeiramente uma menor dependência energética externa. Ao nível do consumo eléctrico, o abastecimento das baterias dos veículos eléctricos representará até 0,5% do consumo eléctrico total, sendo que parte desse abastecimento será garantido através de centrais de ciclo combinado a gás natural. Apesar da maior utilização deste tipo de centrais térmicas para produção de energia, tanto para abastecimento das viaturas eléctricas, como para o consumo em geral, verifica-se que em 2030, o nível de emissões do sistema electroprodutor será cerca de 46% inferior aos níveis registados em 2010, prevendo-se que atinja as 0,163gCO2/kWh produzido pelo Sistema Electroprodutor Nacional devido à maior quota de produção das fontes de energia renovável, como o vento, a hídrica ou a solar.

The genus Corallina (Corallinaceae, Corallinales, Rhodophyta) in the Azores (NE Atlantic): character expression and taxonomic evaluation

Morphological and anatomical characters used for segregating species within the genus Corallina (Corallinaceae, Rhodophyta) have been compiled and evaluated in 120 specimens collected in the Azores. The morphological, anatomical and statistical evaluation of the thirty four segregating characters for the genus Corallina performed in the present study revealed no species segregation, either showing no differences across the whole lot of specimens or being highly variable within sets of plants. This suggests that all studied material belongs to one species, so far Ellisolandia elongata (formely Corallina elongata), thus reinforcing old proposed synonyms. A morphological and anatomical account is provided for this species, considering the whole set of studied specimens.

Rhodolith forming coralline algae in the Upper Miocene of Santa Maria Island (Azores, NE Atlantic) : a critical evaluation

The Late Miocene Malbusca outcrop is located in the southeastern coast of Santa Maria Island (Azores, NE Atlantic), interspersed in volcanic formations. At ~20 meters above present sea level, a prominent discontinuous layer of rhodoliths seizes with an extension of ~250 meters. This paper presents the first taxonomic record of fossil rhodolith forming coralline algae for the Miocene of the Azores. The preserved taxonomic features used were the following: (1) arrangement of basal filaments, (2) epithallial cells (when observable), (3) presence of cell fusions, (4) conceptacle type, (5) number of cells layers which conceptacle chamber floors are situated below the surrounding thallus surface and (6) for the sporangial pores, the orientation of the filaments around the conceptacle pores. Based on these characters, six taxa were identified encompassing three Corallinaceae (Lithophyllum prototypum, Lithophyllum sp., Spongites sp., Hydrolithon sp.) and one Hapalidaceae (Phymatolithon calcareum and cf. Phymatolithon sp.). An unidentified coaxial thallus was also present, the coaxial construction ascribing the specimens to the genus Mesophyllum or Neogoniolithon. Taxonomic accounts for the identified taxa are described, illustrated and an identification key is provided. The report of L prototypum represents the first Miocene record and the preservation of the specimens is very good. Miocene coralline algae seem very consistent among deposits but some species are relevant for particular areas, like in the Azores.

Immunohistochemistry in formalin-gel fixed tissues

There are several hazards in histopathology laboratories and its staff must ensure that their professional activity is set to the highest standards while complying with the best safety procedures. Formalin is one of the chemical hazards to which such professionals are routinely exposed. To decrease this contact, it is suggested that 10% neutral buffered liquid formalin (FL) is replaced by 10% formalin-gel (FG), given the later reduces the likelihood of spills and splashes, and decreased fume levels are released during its handling, proving itself less harmful. However, it is mandatory to assess the effectiveness of FG as a fixative and ensure that the subsequent complementary techniques, such as immunohistochemistry (IHC), are not compromised. Two groups of 30 samples from human placenta have been fixed with FG and FL fixatives during different periods of time (12, 24, and 48 hours) and, thereafter, processed, embedded, and sectioned. IHC for six different antibodies was performed and the results were scored (0–100) using an algorithm that took into account immunostaining intensity, percentage of staining structures, non-specific immunostaining, contrast, and morphological preservation. Parametric and non-parametric statistical tests were used (alpha = 0•05). All results were similar for both fixatives, with global score means of 95•36±6•65 for FL and 96•06±5•80 for FG, and without any statistical difference (P>0•05). The duration of the fixation had no statistical relevance also (P>0•05). So it is proved here FG could be an effective alternative to FL.

Comparison of allocation approaches in soybean biodiesel life cycle assessment

This work shows the influence of using different allocation approaches when modelling the inventory analysis in a soybean biodiesel life cycle assessment (LCA). Results obtained using mass, energy and economic based allocations are compared, focusing on the following aspects: normalised potential environmental impact (PEI) categories, total PEI and relative contributions to the total PEI from each life cycle stage and environmental impact category. Similar results are obtained either using economic and energy based allocations. However, different results are obtained when mass based allocation is used when compared with the other two. This study also illustrates that using different allocation approaches in biodiesel LCA may influence the final conclusions, especially in comparative assertions, emphasising the need to perform a sensitivity analysis in the LCA interpretation step.

Writing and living on the stage of history

This article studies the intercultural trajectory of a Portuguese female aristocrat of the eighteenth to nineteenth centuries. Her trajectory of intercultural transition from a Portuguese provincial lady into an independent owner of a sugar mill in tropical Bahia is documented through family letters, which provide a polyphonic representation of a movement of personal, family, and social transculturation over almost two decades. Maria Bárbara began her journey between cultures as a simple spectator-reader, progressively becoming a commentator-actor-protagonist-author in society, in politics, and in history. These letters function as a translation that is sometimes consecutive, other times simultaneous, of the events lived and witnessed. This concept of intercultural translation is based on the theories of Boaventura de Sousa Santos (2006, 2008), who argues that cultural differences imply that any comparison has to be made using procedures of proportion and correspondence which, taken as a whole, constitute the work of translation itself. These procedures construct approximations of the known to the unknown, of the strange to the familiar, of the ‘other’ to the ‘self’, categories which are always unstable. Likewise, this essay explores the unstable contexts of its object of study, with the purpose of understanding different rationalities and worldviews.

Consolidation and chromatic reintegration of historical renders with lime-based pozzolanic products

Historical renders are exposed to several degradation processes that can lead to a wide range of anomalies,such as scaling, detachments, and pulverization. Among the common anomalies, the loss of cohesion and of adhesion are usually identified as the most difficult to repair; these anomalies still need to be deeply studied to design compatible, durable, and sustainable conservation treatments. The restitution of render cohesion can be achieved using consolidating products. Nevertheless, repair treatments could induce aesthetic alterations, and, therefore, are usually followed by chromatic reintegration. This work aims to study the effectiveness of mineral products as consolidants for lime-based mortars and simultaneously as chromatic treatments for pigmented renders. The studied consolidating products are prepared by mixing air lime,metakaolin, water, and mineral pigments. The idea of these consolidating and coloring products rises from a traditional lime-based technique, the limewash, widely diffused in southern Europe and in the Mediterranean area. Consolidating products were applied and tested on lime-based mortar specimens with a low binder–aggregate ratio and therefore with reduced cohesion. A physico-mechanical, microstructural, and mineralogical characterization was performed on untreated and treated specimens, in order to evaluate the efficacy and durability of the treatments. Accelerated aging tests were also performed to assess consolidant durability, when subjected to aggressive conditions. Results showed that the consolidants tested are compatible, effective, and possess good durability.

Microinjection molding of polyamide 6/carbon nanotube composites

Microinjection molding of polymer composites with carbon nanotubes (CNT) requires previous production of the nanocomposites, often by melt extrusion. Each processing step has a thermo-mechanical effect on the polymer melt, conveying different properties to the final product. In this work, polyamide 6 and its composites with pristine and functionalized CNT (f-CNT) were processed by a mini twin-screw extrusion, followed by microinjection molding. The morphology induced on the polymer by each process was analyzed by differential scanning calorimetry and wide angle X-ray diffraction. Calorimetric analysis showed a secondary crystallization for the microinjected materials, absent for the extruded materials. The characterization of microinjected polyamide 6 by X-ray diffraction revealed a large contribution of the c phase to the total crystallinity, mainly in the skin region, while the nanocomposites and extruded materials were characterized by a larger contribution of the a phase. Functionalization of CNT did not affect significantly the polymer morphology compared to composites with pristine CNT.