Limitations in controlling white mold on common beans with Trichoderma spp. at the fall-winter season

We studied the effectiveness of application of Trichoderma spp. in controlling white mold on common beans at the fall-winter crop in the Zona da Mata region of the State of Minas Gerais, Brazil. There was no effect of the antagonist in reducing the disease severity, which could be explained by the low temperatures and the high inoculum pressure in the field. We concluded that Trichoderma applications are not recommended for control of white mold on common beans at the fall-winter season in regions with average temperature bellow 20 °C, since this condition favor more the pathogen than the antagonist.

Biocontrol of Sclerotinia sclerotiorum and white mold of soybean using saprobic fungi from semi-arid areas of Northeastern Brazil

ABSTRACTThe incidence and the levels of yield loss caused by the white mold of soybean (caused by the fungus Sclerotinia sclerotiorum) have increased in areas of higher altitude at Cerrado and Southern Brazil, causing yield losses of up to 60%. The aim of this study was to select saprobic fungi with the potential to control the white mold of soybean. First, in vitroantagonism screening was carried out to test eight saprobic fungi against S. sclerotiorum. Assessment of S. sclerotiorum mycelial growth was done at four and seven days after its placement on the culture medium. The isolate showing greatest antagonistic effect in all tests/assessments was Myrothecium sp. An in vivo experiment was conducted in a greenhouse and growth chamber, where plants previously treated with eight saprobic fungi were artificially inoculated with S. sclerotiorum. The fungal culture medium (potato-dextrose) and the commercial resistance inducer acibenzolar-S-methyl were used as controls. In the in vivotests, severity of the white mold was assessed at 8, 14 and 21 days after inoculation. The highest reduction percentage in the lesion length was observed for the treatment with Myrothecium sp. (70%), which has the greater potential to be used as biocontrol agent of soybean under the conditions of this experiment.

Uusi ja vanha Hayden White

Kirjallisuusarvostelu

Thermal comfort in reduced models of broilers' houses, under different types of roofing materials

The research was developed to evaluate the use of different types of roofing materials regularly used in poultry houses. Measurements of thermal comfort were made through the use of techniques such as the Black Globe and Humidity Index (BGHI), the Thermal Heat Load (THL) and Enthalpy (H). Conducted in the State University of Goiás, during the months of April and May, 2011, the experiment was composed of five different treatments: AC - Asbestos cement tiles, BA -Bamboo tiles, BAP - Bamboo tiles painted in white, FB -Vegetable fiber tiles and bitumen, FBP -Vegetable fiber tiles and bitumen painted in white. The experiment consisted in 15 repetitions, which were considered the different days of measurements taken. Throughout the studied period, the time of the day considered the least comfortable was the one observed at 2:00pm, and the coverage of vegetable fiber and bitumen showed the highest value of BGHI (84.1) when compared to other types of coverage, characterizing a situation of lower thermal comfort, and no difference was found for THL and H on treatments in the studied region.

Characterization and treatment of sisal fiber residues for cement-based composite application

Sisal fiber is an important agricultural product used in the manufacture of ropes, rugs and also as a reinforcement of polymeric or cement-based composites. However, during the fiber production process a large amount of residues is generated which currently have a low potential for commercial use. The aim of this study is to characterize the agricultural residues by the production and improvement of sisal fiber, called field bush and refugo and verify the potentiality of their use in the reinforcement of cement-based composites. The residues were treated with wet-dry cycles and evaluated using tensile testing of fibers, scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. Compatibility with the cement-based matrix was evaluated through the fiber pull-out test and flexural test in composites reinforced with 2 % of sisal residues. The results indicate that the use of treated residue allows the production of composites with good mechanical properties that are superior to the traditional composites reinforced with natural sisal fibers.

White mold detection in common beans through leaf reflectance spectroscopy

ABSTRACT This study aimed to identify wavelengths based on leaf reflectance (400-1050 nm) to estimate white mold severity in common beans at different seasons. Two experiments were carried out, one during fall and another in winter. Partial Least Squares (PLS) regression was used to establish a set of wavelengths that better estimates the disease severity at a specific date. Therefore, observations were previously divided in two sub-groups. The first one (calibration) was used for model building and the second subgroup for model testing. Error measurements and correlation between measured and predicted values of disease severity index were employed to provide the best wavelengths in both seasons. The average indexes of each experiment were of 5.8% and 7.4%, which is considered low. Spectral bands ranged between blue and green, green and red, and red and infrared, being most sensitive for disease estimation. Beyond the transition ranges, other spectral regions also presented wavelengths with potential to determine the disease severity, such as red, green, and near infrared.

Acalasia do esôfago: miotomia com transiluminação

Laparoscopic techniques have provided a new dimension to correct functional disorders of the esophagus, which has stimulated some investigators to recently report the use of laparoscopic cardiomyotomy in the treatment of esophageal achalasia. Now, a new instrument has been added to the current laparoscopic technique to offer a safer and easier method to proceed complete myotomy. After the dissection of the esophagogastric junction, a special catheter is introduced reaching the stomach. lt has an illuminated 10 cm extremity connected to a light source. lts withdrawal allows to visualize every muscle circular fiber by transillumination withan improved view provide by the laparoscopic optic system lens. This condition modifies the operative surgeon s attitude offering a better controlled situation over the procedure. The use of transillumination o fthe esophagogastric junction provides a good identification of the mucosa e submucosa avoiding the risk of esophageal perforation. It also helps to perform a complete myotomy preventing the ocurrence of persistent disphagia in the postoperative period. Cardiomyotomy with parcial fundoplication is possible by videolaparoscopic approach, now made easier with transillumination. This technique is safe and the functional results are similar to those observed in the literature for conventional open procedures, with the obvious advantages of the minimally invasive approach.

Postcolonial Cultural Identity and the Caribbean White Creole in Jean Rhys’s Wide Sargasso Sea and Phyllis Shand Allfrey’s The Orchid House

Tutkielmassani tarkastelen, miten teokset Wide Sargasso Sea (1966) ja The Orchid House (1953) käsittelevät kulttuuri-identiteettiä henkilöhahmojen luonnissa sekä millaisia yhtäläisyyksiä ja eroja näissä esiintyy. Kulttuuri-identiteetti on yksi jälkikoloniaalisen kirjallisuudentutkimuksen keskeisimmistä teemoista. Tarkastelen tekstejä kahden keskeisen teeman kautta: nimet ja maisemakuvaukset. Molemmat teokset käyttävät näitä teemoja monipuolisesti eri identiteetin osa-alueiden kuvaamiseen. Tarkasteluni keskittyy pääasiassa teosten naispäähahmoihin, mutta käsittelen soveltuvilta osin myös muita henkilöhahmoja. Monet Jean Rhysia ja Phyllis Shand Allfreyta tutkineet kirjallisuuskriitikot ovat olleet haluttomia näkemään teosten välillä olevan yhteyden. Wide Sargasso Sean intertekstuaalinen yhteys Charlotte Brontën teokseen Jane Eyre onkin usein jättänyt hienovaraisemmat intertekstuaaliset viittaukset varjoonsa. Viimeisimpien vuosien aikana on jälkikoloniaalisen kirjallisuudentutkimuksen saralla kuitenkin ollut havaittavissa myönteisempää suhtautumista myös näihin intertekstuaalisiin viittauksiin. Lähtökohtani teosten tarkasteluun on jälkikoloniaalinen kirjallisuudentutkimus ja ensisijaisia teoreettisia lähteitäni ovat muun muassa Patrick Hoganin ja Stuart Hallin käsitykset jälkikoloniaalisesta kulttuuri-identiteetistä. Tarkastelen pääasiallisesti Karibian alueen valkoisten kreolien kulttuuri-identiteettiä. Koska kummankin teoksen keskeisimmät henkilöhahmot ovat pääasiassa naisia, myös naisnäkökulma tulee esiin tutkielmassani. Tutkielmastani käy ilmi, että teosten välillä on selkeä yhteys siinä, millaisia välineitä käytetään kulttuuri-identiteetin kuvaamiseen. Teokset liittyvät kiinteästi dominicalaiseen kirjallisuusperinteeseen, mutta yhteneväisyyksiä on havaittavissa siinä määrin, ettei niitä pystytä selittämään pelkästään samankaltaisella kulttuurisella taustalla.

”AMERICAN ENVIRONMENTS”. Ympäristön merkitykset Don DeLillon romaanissa White Noise

Pro gradu -tutkielmani tavoitteena on analysoida ympäristön merkityksiä yhdysvaltalaiskirjailija Don DeLillon (1936-) romaanissa White Noise (1985). Lähestyn romaania ekokriittisen kirjallisuudentutkimuksen näkökulmasta ja kytken sen ekokriitikko Lawrence Buellin ajatukseen nk. ympäristöalitajunnasta. Analysoin DeLillon romaania myös yhteydessä filosofi Jean Baudrillardin ajatukseen postmodernin ajan länsimaisessa ja erityisesti amerikkalaisessa yhteiskunnassa vallalla olevasta simulaatioiden järjestelmästä. White Noise -romaanin todellisuus vastaa Baudrillardin ajatusta yhteiskunnasta, jossa representaatiot ja simulaatiot ovat korvanneet todellisuuden. Media, erityisesti televisio, tuottaa jatkuvasti kuvia ja simulaatioita, joiden kyllästämässä todellisuudessa aineellinen maailma ja luonto jäävät tavoittamattomiin. White Noise -romaanin henkilöiden yhteys aineelliseen ympäristöönsä ja luonnonilmiöihin on katkennut, sillä heidän arkensa pyörii pitkälti kuluttamisen ja televisionkatselun ympärillä. Romaanin todellisuudessa myös identiteetistä on tullut eräänlainen tuote, jonka jokainen voi rakentaa mieleisekseen kulutusvalinnoillaan. Identiteettiproblematiikan ohella myös kuolemalla on keskeinen asema tutkielmassani. White Noise -romaanin päähenkilö Jack Gladney kärsii paniikinomaisesta kuolemanpelosta, jota pyrkii torjumaan erilaisin keinoin siinä kuitenkaan onnistumatta. Tavoitteenani on osoittaa, että tämä piinaava pelko kuolemaa kohtaan on syntynyt simulaatioyhteiskunnan tuloksena. Vieraantuminen aineellisesta maailmasta ja luonnon prosesseista on johtanut vieraantumiseen ruumiista ja kuolemasta. Analysoin kuolemaa romaanissa eräänlaisena simulaatioiden maailman äärirajana, viimeisenä luonnollisena tapahtumana. White Noise -romaanin päähenkilö Jack Gladney ahdistuu kulutuskeskeisessä, simulaatioiden kyllästämässä elinympäristössään. Tulkitsen tämän ahdistuksen tarpeena tunnistaa tärkeä vuorovaikutussuhde yksilön ja hänen aineellisen ympäristönsä välillä. Jack ei ole vielä täysin sulautunut osaksi simulaatioiden maailmaa, vaan hän tiedostaa kytköksen itsensä ja aineellisen maailman välillä. Tämä romaanista implisiittisesti esiin nouseva tiedostamisen tunne korostaa ihmisen ja ympäristön sekä laajemmin kulttuurin ja luonnon välttämätöntä yhteyttä. DeLillon romaanista on löydettävissä ajatus ympäristöalitajunnasta, joka alleviivaa ympäristön ja luonnon merkitystä ihmiselle.

Repair of segmental bone defects with fiber-reinforced composite: a study of material development and an animal model on rabbits

The Repair of segmental defects in load-bearing long bones is a challenging task because of the diversity of the load affecting the area; axial, bending, shearing and torsional forces all come together to test the stability/integrity of the bone. The natural biomechanical requirements for bone restorative materials include strength to withstand heavy loads, and adaptivity to conform into a biological environment without disturbing or damaging it. Fiber-reinforced composite (FRC) materials have shown promise, as metals and ceramics have been too rigid, and polymers alone are lacking in strength which is needed for restoration. The versatility of the fiber-reinforced composites also allows tailoring of the composite to meet the multitude of bone properties in the skeleton. The attachment and incorporation of a bone substitute to bone has been advanced by different surface modification methods. Most often this is achieved by the creation of surface texture, which allows bone growth, onto the substitute, creating a mechanical interlocking. Another method is to alter the chemical properties of the surface to create bonding with the bone – for example with a hydroxyapatite (HA) or a bioactive glass (BG) coating. A novel fiber-reinforced composite implant material with a porous surface was developed for bone substitution purposes in load-bearing applications. The material’s biomechanical properties were tailored with unidirectional fiber reinforcement to match the strength of cortical bone. To advance bone growth onto the material, an optimal surface porosity was created by a dissolution process, and an addition of bioactive glass to the material was explored. The effects of dissolution and orientation of the fiber reinforcement were also evaluated for bone-bonding purposes. The Biological response to the implant material was evaluated in a cell culture study to assure the safety of the materials combined. To test the material’s properties in a clinical setting, an animal model was used. A critical-size bone defect in a rabbit’s tibia was used to test the material in a load-bearing application, with short- and long-term follow-up, and a histological evaluation of the incorporation to the host bone. The biomechanical results of the study showed that the material is durable and the tailoring of the properties can be reproduced reliably. The Biological response - ex vivo - to the created surface structure favours the attachment and growth of bone cells, with the additional benefit of bioactive glass appearing on the surface. No toxic reactions to possible agents leaching from the material could be detected in the cell culture study when compared to a nontoxic control material. The mechanical interlocking was enhanced - as expected - with the porosity, whereas the reinforcing fibers protruding from the surface of the implant gave additional strength when tested in a bone-bonding model. Animal experiments verified that the material is capable of withstanding load-bearing conditions in prolonged use without breaking of the material or creating stress shielding effects to the host bone. A Histological examination verified the enhanced incorporation to host bone with an abundance of bone growth onto and over the material. This was achieved with minimal tissue reactions to a foreign body. An FRC implant with surface porosity displays potential in the field of reconstructive surgery, especially regarding large bone defects with high demands on strength and shape retention in load-bearing areas or flat bones such as facial / cranial bones. The benefits of modifying the strength of the material and adjusting the surface properties with fiber reinforcement and bone-bonding additives to meet the requirements of different bone qualities are still to be fully discovered.

Relação entre a Classificação Clínica de White e a Histopatologia das Placentas de Gestantes Diabéticas

Objetivo: analisar a relação entre a classificação clínica de White e as alterações histopatológicas de placentas de gestantes diabéticas, comparando, de forma qualitativa, as alterações histopatológicas de placentas de gestantes não-diabéticas e diabéticas gestacionais (classes A e A/B), clínicas de curta duração (classes B e C) e clínicas com vasculopatia (classes D a FRH), no termo e no pré-termo, e de acordo com a qualidade do controle glicêmico na gestação. Pacientes e Métodos: foram colhidas amostras de placentas de todas as gestantes diabéticas, atendidas entre 1991 e 1996 na Maternidade do Hospital das Clínicas da Faculdade de Medicina de Botucatu, coradas pela técnica de hematoxilina-eosina e submetidas a exame histopatológico. A qualidade do controle glicêmico foi analisada pela média glicêmica da gestação e classificada em adequada e inadequada, com limite de 120 mg/dl. A idade da gestação foi individualizada em termo e pré-termo. Resultados: observou-se que 42 recém-nascidos (43,3%) eram de termo e o restante, de pré-termo (56,7%). O índice de prematuridade foi maior nas diabéticas clínicas (classes B e C; D a FRH). Algumas alterações histopatológicas só foram encontradas em placentas de gestantes diabéticas: degeneração cistóide, edema corial, edema da íntima, dismaturidade, hiperplasia das células de Hofbauer, vilite, células fantasmas, dois vasos no cordão umbilical e endarterite. Conclusões: as alterações histopatológicas de placentas de gestantes com diabete gestacional (classes A e A/B), clínico de curta duração (classes B e C) e clínico com vasculopatia (classes D a FRH) foram semelhantes às das não-diabéticas e, portanto, independeram da classificação clínica de White. As alterações histopatológicas de placentas de gestantes diabéticas não se relacionaram com a idade gestacional ao nascimento e com a qualidade do controle glicêmico materno. A comparação entre as alterações histopatológicas e a elevada proporção de recém-nascidos pré-termo nas diabéticas clínicas, classes D a FRH, sugerem amadurecimento placentário precoce nas diabéticas clínicas com vasculopatia.

Clinical and pathological study of an outbreak of obstructive urolithiasis in feedlot cattle in southern Brazil

The epidemiology, clinical picture and pathology of an outbreak of urolithiasis in cattle in southern Brazil are described. The disease occurred in August 1999 in a feedlot beef cattle herd. Five out of 1,100 castrated steers were affected. Clinical signs included colic and ventral abdominal distension. White, sand-grain-like mineral deposits precipitated on the preputial hairs. Affected cattle died spontaneously 24-48 hrs after the onset of the clinical signs. Only one animal recovered after perineal urethrostomy. Necropsy findings included calculi blocking the urethral lumen of the distal portion of the penile sigmoid flexure, urinary bladder rupture with leakage of urine into the abdominal cavity and secondary fibrinous peritonitis. Daily water intake was low since water sources were scarce and not readily available. The animals were fed rations high in grains and received limited amounts of roughage. Biochemical analysis revealed that the calculi were composed of ammonium phosphate. A calcium-phosphorus imbalance (0.4:0.6) was detected in the feedlot ration. For the outbreak, it is suggested that contributing factors to urolith formation include insufficient fiber ingestion, low water intake and high dietary levels of phosphorus. No additional cases were observed in that feedlot after preventive measures were established. Similar dietary mismanagement in fattening steers has been associated with obstructive urolithiasis in feedlot beef cattle in other countries.

Surface transformation hardening of carbon steel with high power fiber laser

This study investigated the surface hardening of steels via experimental tests using a multi-kilowatt fiber laser as the laser source. The influence of laser power and laser power density on the hardening effect was investigated. The microhardness analysis of various laser hardened steels was done. A thermodynamic model was developed to evaluate the thermal process of the surface treatment of a wide thin steel plate with a Gaussian laser beam. The effect of laser linear oscillation hardening (LLOS) of steel was examined. An as-rolled ferritic-pearlitic steel and a tempered martensitic steel with 0.37 wt% C content were hardened under various laser power levels and laser power densities. The optimum power density that produced the maximum hardness was found to be dependent on the laser power. The effect of laser power density on the produced hardness was revealed. The surface hardness, hardened depth and required laser power density were compared between the samples. Fiber laser was briefly compared with high power diode laser in hardening medium-carbon steel. Microhardness (HV0.01) test was done on seven different laser hardened steels, including rolled steel, quenched and tempered steel, soft annealed alloyed steel and conventionally through-hardened steel consisting of different carbon and alloy contents. The surface hardness and hardened depth were compared among the samples. The effect of grain size on surface hardness of ferritic-pearlitic steel and pearlitic-cementite steel was evaluated. In-grain indentation was done to measure the hardness of pearlitic and cementite structures. The macrohardness of the base material was found to be related to the microhardness of the softer phase structure. The measured microhardness values were compared with the conventional macrohardness (HV5) results. A thermodynamic model was developed to calculate the temperature cycle, Ac1 and Ac3 boundaries, homogenization time and cooling rate. The equations were numerically solved with an error of less than 10-8. The temperature distributions for various thicknesses were compared under different laser traverse speed. The lag of the was verified by experiments done on six different steels. The calculated thermal cycle and hardened depth were compared with measured data. Correction coefficients were applied to the model for AISI 4340 steel. AISI 4340 steel was hardened by laser linear oscillation hardening (LLOS). Equations were derived to calculate the overlapped width of adjacent tracks and the number of overlapped scans in the center of the scanned track. The effect of oscillation frequency on the hardened depth was investigated by microscopic evaluation and hardness measurement. The homogeneity of hardness and hardened depth with different processing parameters were investigated. The hardness profiles were compared with the results obtained with conventional single-track hardening. LLOS was proved to be well suitable for surface hardening in a relatively large rectangular area with considerable depth of hardening. Compared with conventional single-track scanning, LLOS produced notably smaller hardened depths while at 40 and 100 Hz LLOS resulted in higher hardness within a depth of about 0.6 mm.

Characterization of fiber and vessel elements in pulp suspension images

The thesis is related to the topic of image-based characterization of fibers in pulp suspension during the papermaking process. Papermaking industry is focusing on process control optimization and automatization, which makes it possible to manufacture highquality products in a resource-efficient way. Being a part of the process control, pulp suspension analysis allows to predict and modify properties of the end product. This work is a part of the tree species identification task and focuses on analysis of fiber parameters in the pulp suspension at the wet stage of paper production. The existing machine vision methods for pulp characterization were investigated, and a method exploiting direction sensitive filtering, non-maximum suppression, hysteresis thresholding, tensor voting, and curve extraction from tensor maps was developed. Application of the method to the microscopic grayscale pulp images made it possible to detect curves corresponding to fibers in the pulp image and to compute their morphological characteristics. Performance of the method was evaluated based on the manually produced ground truth data. An accuracy of fiber characteristics estimation, including length, width, and curvature, for the acacia pulp images was found to be 84, 85, and 60% correspondingly.