948 resultados para upper chamber
Comparative analysis of stresses distribution in upper incisors restored with different post system.
Resumo:
This report describes the development of a behaviour chamber and the validation of the chamber to measure locomotor activity of a horse, Locomotor activity was detected by four Mini-beam sensors and recorded on a data logger every 5 min for 22 h. Horses were more active during daytime than in the evening, which was at least partially related to human activity in their surroundings. To validate the ability of the chambers to detect changes in activity, fentanyl citrate and xylazine HCl, agents well-characterized as a stimulant and a depressant, respectively, were administered to five horses. Fentanyl citrate (0.016 mg/kg) significantly increased locomotor activity which persisted for 30 min, Xylazine HCl (1 mg/kg) significantly reduced locomotor activity for 90 min. Amitraz produced a dose-dependent decrease in locomotor activity, lasting 75 min for the 0.05 mg/kg dose, 120 min for the 0.10 mg/kg dose, and 180 min for the 0.15 mg/kg dose, In a separate experiment, yohimbine administration immediately reversed the sedative effect of amitraz, This suggests there is a similarity in the mode of action of amitraz, xylazine and detomidine, as yohimbine acts primarily by blocking central alpha 2-adrenoceptors that are stimulated by agents like xylazine, There was also a significant decrease in locomotor activity following injection of detomidine (0.02, 0.04 and 0.08 mg/kg) for 1.5, 3.5 and 5.0 h, respectively, the locomotor chamber is a useful, sensitive and highly reproducible tool for measuring spontaneous locomotor activity in the horse, which allows investigators to determine an agent's average time of onset, duration and intensity of effect on movement.
Resumo:
Topography has been reported to be the major factor ruling the spatial distribution of Acrisols, Plinthosols and Gleysols on the seasonally flooded, low elevation plateaux of the upper Amazon basin occupied by Tertiary (Ica & Solimoes) sediments. In this study, detailed morphological and mineralogical investigations conducted in a representative 25-ha site were combined with hydro-geochemical data to relate the vertical and lateral soil differentiations observed to the hydro-geological history of that part of the basin. As a result of the uplift of the Andes, several cuts in the extensive Tertiary marshlands have formed, at first, slightly incised plateaux of low elevation. There, weathering under hot and humid climates would have generated a reddish, freely drained and bioturbated topsoil layer and the vertical differentiation in subsoil sediments of a plinthite over an iron-depleted mottled clay. The second episode of soil differentiation is linked to the replacement of the forest by a savannah under the drier climates of the late Pleistocene, which favours surface runoff and the infill of the incisions by fine particles. This infill, combined with the return to the present humid climate, has then enabled the local groundwater to rise on the plateaux and to generate episaturation at the topsoil/subsoil transition close to the depressions. Nowadays, ferrous iron is released from the partly iron-depleted topsoil weathering front at high water levels during the rainy seasons. It moves from footslope to low-lying positions and from top to bottom in the soil profile according to the groundwater dynamics. The present general trend is thus to the lateral export of iron at high water levels due to subsurface and overland flows, its vertical transfer during the recession of the groundwater and accumulation in a nodular plinthite. In the latter, ferrous iron is adsorbed onto its softest iron masses where it feeds the neoformation of ferrihydrite that rapidly dehydrates into haematite.
Resumo:
Material from a new titanosaur from the Bauru Basin (Bauru Group), Brazil is described and compared with well-known titanosaurs. Adamantisaurus mezzalirai gen. et sp. nov. is based on six articulated anterior caudal vertebrae and two haemapophyses collected from the Adamantina Formation, which is considered to be Campanian-Maastrichtian? in age. Adamantisaurus mezzalirai is characterized by the following combination of characteristics: anterior caudal vertebrae with straight or slightly backwardly-projecting neural spines with strongly expanded distal ends, stout prespinal lamina, very wide pre- and postzygapophyseal articular facets, and concave postzygapophyseal articular facets on anterior caudal vertebrae. Although our cladistic analysis has produced equivocal results, Adamantisaurus mezzalirai shares with DGM 'Series B' (Peiropolis titanosaur) and Aeolosaurus the presence of postzygapophyses with concave articular facets, and shares with DGM 'Series B' the presence of laterally expanded neural spines and stout prespinal lamina. Additionally, A. mezzalirai shares with DGM 'Series' C (other titanosaur from Peiropolis) the presence of short neural spines.
Resumo:
Temporal distribution and composition of ichthyoplankton and their relationships with some environmental variables of Leopoldo's Inlet (Ressaco do Leopoldo) on the upper Parana River floodplain, southern Brazil, were analysed. Samples were taken from February 1991 to February 1992, and 3480 larvae were collected. The highest density of larvae was observed in November 1991 (36.79 larvae/ 10 m(3)) at night (night/day ratio 7: 1). Species composition showed a predominance of Characiformes (80%). There was a high density (4.28 larvae/10 m(3)) of Bryconamericus stramineus throughout almost the whole study period, the majority of the species were more frequently collected at night. Pearson's correlation indicated a relationship between larval density, temperature, and pluviometric index. Leopoldo's Inlet, whose ichthyofauna is mainly composed of grazing and resident species. shows favourable conditions for fish reproduction and development.
Resumo:
The effect of different anatomic shapes and materials of posts in the stress distribution on an endodontically treated incisor was evaluated in this work. This study compared three post shapes (tapered, cylindrical and two-stage cylindrical) made of three different materials (stainless steel, titanium and carbon fibre on Bisphenol A-Glycidyl Methacrylate (Bis-GMA) matrix). Two-dimensional stress analysis was performed using the Finite Element Method. A static load of 100N was applied at 45degrees inclination with respect to the incisor's edge. The stress concentrations did not significantly affect the region adjacent to the alveolar bone crest at the palatine portion of the tooth, regardless of the post shape or material. However, stress concentrations on the post/dentin interface on the palatine side of the tooth root presented significant variations for different post shapes and materials. Post shapes had relatively small impact on the stress concentrations while post materials introduced higher variations on them. Stainless steel posts presented the highest level of stress concentration, followed by titanium and carbon/Bis-GMA posts.
Resumo:
This study evaluated the pulp chamber penetration of peroxide bleaching agent in human and bovine teeth after office bleach technique. All the teeth were sectioned 3 mm apical of the cement-enamel junction and were divided into 2 groups, A (70 third human molars) and B (70 bovine lateral incisors), that were subdivided into A1 and B1 restored by using composite resin, A2 and B2 by using glass ionomer cement, and A3 and B3 by using resin-modified glass ionomer cement; A4, A5, B4, and B5 were not restored. Acetate buffer was placed in the pulp chamber, and the bleaching agent was applied for 40 minutes as follows: A1-A4 and B1-B4, 38% hydrogen peroxide exposure and A5 and B5, immersion into distilled water. The buffer solution was transferred to a glass tube in which leuco crystal violet and horseradish peroxidase were added, producing a blue solution. The optical density of the blue solution was determined by spectrophotometer and converted into microgram equivalents of hydrogen peroxide. Data were submitted to analysis of variance and Dunnett, Kruskal-Wallis, and Tukey tests (5%). A higher level of hydrogen peroxide penetrated into the pulp chamber in resin-modified glass ionomer cements in bovine (0.79 +/- 0.61 mu g) and human (2.27 +/- 0.41 mu g) groups. The bleaching agent penetration into the pulp chamber was higher in human teeth for any experimental situation. The penetration of the hydrogen peroxide depends on restorative materials, and under the conditions of this study human teeth are more susceptible to penetration of bleaching agent into the pulp chamber than bovine teeth.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
This is a report about the second occurrence and description of the third specimen of Stratiotosuchus maxhechti (Baurusuchidae, Crocodyliformes) from the Bauru Basin, Upper Cretaceous of southeastern Brazil. The material was found in the typical reddish, fine-grained sandstone from the Adamantina Formation, Bauru Group, Monte Alto County, São Paulo State. These strata are considered to be Campanian-Maastrichtian in age. It is the second skull of Stratiotosuchus maxhechti recovered where the choanal region and the skull-mandible articulation is preserved. The holotype of this species comes from the Adamantina Formation from southwestern São Paulo State, while this new specimen comes from its northern-central region, making possible biocbronological and paleoccological correlations among different geographically distant stratigraphic horizons within the Bauru Basin. The main osteologic contributions from this new specimen are the surangular taking part in the skull/mandible articulation and the presence of a relatively well-preserved choanal region, which are not seen in the holotype, furthering the knowledge of Stratiotosuchus maxhechti. Based on the features of this new specimen, an emended diagnosis is provided.