Effect of functional gain on satisfaction with medical rehabilitation after stroke

Objective: To examine the association between gain in motor and cognitive functional status with patient satisfaction 3-6 mo after rehabilitation discharge. Design: Patient satisfaction and changes in functional status were examined in 18,375 patients with stroke who received inpatient medical rehabilitation. Information was obtained from 144 hospitals and rehabilitation facilities contributing records to the Uniform Data System for Medical Rehabilitation and the National Follow-up Services. Results: Data analysis revealed significant (P < 0.05) differences in satisfaction responses based on whether information was collected from patient self-report or from a family member proxy, and the two subsets were analyzed separately. Logistic regression revealed the following significant predictors of satisfaction for data collected from stroke patients: cognitive and motor gain, rehospitalization, who the patient was living with at follow-up, age, and follow-up therapy. In the patient-reported data subset, compared with patients who showed improved cognitive or motor functional status, those with no change, respectively, had a 31% and 33% reduced risk of dissatisfaction. In addition, rehospitalized patients had a higher risk of dissatisfaction. For the proxy reported data subset, significant influences on satisfaction were health maintenance, rehospitalization, stroke type, ethnicity, cognitive FIM(TM) gain, length of stay, and follow-up therapy. Conclusions: Ratings of satisfaction with rehabilitation services were affected by change in functional status and whether the information was collected from patient rating or proxy response.

Dynamic stability of laminated FGM plates based on higher-order shear deformation theory

This paper conducts a dynamic stability analysis of symmetrically laminated FGM rectangular plates with general out-of-plane supporting conditions, subjected to a uniaxial periodic in-plane load and undergoing uniform temperature change. Theoretical formulations are based on Reddy's third-order shear deformation plate theory, and account for the temperature dependence of material properties. A semi-analytical Galerkin-differential quadrature approach is employed to convert the governing equations into a linear system of Mathieu-Hill equations from which the boundary points on the unstable regions are determined by Bolotin's method. Free vibration and bifurcation buckling are also discussed as subset problems. Numerical results are presented in both dimensionless tabular and graphical forms for laminated plates with FGM layers made of silicon nitride and stainless steel. The influences of various parameters such as material composition, layer thickness ratio, temperature change, static load level, boundary constraints on the dynamic stability, buckling and vibration frequencies are examined in detail through parametric studies.

Digitally-implemented naturally sampled PWM suitable for multilevel converter control

For dynamic closed loop control of a multilevel converter with a low pulse number (ratio of switching frequency to synthesized fundamental), natural sampled pulse-width modulation (PWM) is the best form of modulation. Natural sampling does not introduce distortion or a delayed response to the modulating signal. However previous natural sampled PWM implementations have generally been analog. For a modular multilevel converter, a digital implementation has advantages of accuracy and flexibility. Re-sampled uniform PWM is a novel digital modulation technique which approaches the performance of natural PWM. Both hardware and software implementations for a five level multilevel converter phase are presented, demonstrating the improvement over uniform PWM.

Controle estatístico de processo aplicado no monitoramento da absorção de água por carcaças de frango durante a etapa de pré-resfriamento

A absorção de água por carcaças de frango na etapa de pré-resfriamento da linha abate representa uma característica de qualidade importante relacionada ao rendimento do produto final. Uma forma de manter o padrão de qualidade de um produto é garantir que as etapas do processo sejam estáveis e replicáveis. Ao empregar o Controle Estatístico de Processo (CEP) é possível obter estabilidade e melhorias nos processos, por meio da redução da variabilidade. Neste contexto, o objetivo deste trabalho foi a aplicação de gráficos de controle, análise de correlação, estatística descritiva, testes de hipóteses e regressão linear múltipla na linha de abate de um abatedouro-frigorífico de aves para monitorar a variabilidade da absorção de água pelas carcaças de frango após a etapa de pré-resfriamento. Como resultado, verificou-se que o teor de absorção de água das carcaças de frango apresentou elevada variabilidade, sendo que 10% (8/80) das carcaças apresentaram absorção de água superior ao limite de 8% definido pela legislação brasileira. Do total de 16 variáveis de entrada analisadas, as mais impactantes no teor de absorção de água foram o “tempo de retenção da carcaça no pré-chiller” e o “tempo de espera da carcaça após a etapa de gotejamento”. Entretanto, o modelo de regressão obtido apresentou baixa correlação (R²=0,16) que foi associada à elevada variabilidade da variável-resposta. Os resultados da estatística descritiva demonstraram que as variáveis de entrada também apresentaram elevada variabilidade, com coeficiente de variação entre 7,95 e 63,5%. Verificou-se, pela análise dos gráficos de controle de medida individual e da amplitude móvel, que 15 das 16 variáveis de entrada se apresentaram fora de controle estatístico assim como a variável-resposta. Baseado no fluxograma e na descrição das etapas da linha de abate, previamente realizados, atribuiu-se à falta de padronização na condução das etapas e de procedimentos para o controle de qualidade das operações na linha de abate como fatores relevantes que poderiam estar associados à presença de causas especiais no processo. Concluiu-se que para reduzir a elevada variabilidade das variáveis e eliminar as causas especiais presentes são necessários ajustes operacionais para, dessa forma, obter um processo mais estável e mais uniforme garantindo o padrão de qualidade das carcaças de frango em relação ao teor de absorção de água.

India, Latin America, and the Caribbean during the Cold War

In this period, the key to the relationship between India and Latin America and the Caribbean (LAC) was based in the political nature of this liaison: it was a "uni-multilateral" relationship, centered in India, where LAC countries operated as a group of autonomous entities (an "island chain" structure), and not as a unit of a supranational character with unified international conduct (an island structure). As we will see, faced with uniform and consistent Indian policies, LAC had national policies which make it impossible to discuss a regional policy towards India. The goal of this work is to form a general characterization of the bilateral policies during the period of the Cold War with the intent of identifying the key explanatory factors of the process. While this may be a limited objective, it addresses the non-existence of an academic debate surrounding the topic. We intend to contribute an analysis which in this phase is primarily descriptive.

SPAD-502 readings in response to photon fluence in leaves with different chlorophyll content

The chlorophyll meter (SPAD-502) is widely used to estimate chlorophyll content, but non-uniform chloroplast distribution can affect its accuracy. This study aimed to assess the effect of photon fluence (F, irradiance x time of illumination) in leaves with different chlorophyll content and determine the effect of chlorophyll a/b on SPAD values of four tropical tree species (Croton draconoides Müll. Arg., Hevea guianensis Aubl., Hymenaea courbaril L. and Matisia cordata H.B.K.). There were also determined calibration equations for the chlorophyll meter and assessed the effect of F on SPAD values between 07:00 h and 17:00 h. Calibration equations were obtained after determining leaf chlorophyll content in the laboratory. Increases in F with time caused a reduction in SPAD values in species with a high chlorophyll content, with reductions of 20% in M. cordata and 10% in H. guianensis. Leaves of C. draconoides and H. courbaril had lower chlorophyll content and showed no changes in SPAD values with increase in F. The chlorophyll a/b ratio increased with SPAD values and the SPAD/chlorophyll relationship was best described by an exponential equation. It seems that F may affect SPAD values in leaves with high chlorophyll content, probably due to non-uniform chloroplast distribution at high irradiance. This indicates that SPAD values tend to be more accurate if recorded early in morning when irradiance is low.

Fatigue Prediction on Fibrin Poly-ε-caprolactone Macroporous Scaffolds

Tissue engineering applications rely on scaffolds that during its service life, either for in-vivo or in vitro applications, are under mechanical solicitations. The variation of the mechanical condition of the scaffold is strongly relevant for cell culture and has been scarcely addressed. Fatigue life cycle of poly-ε-caprolactone, PCL, scaffolds with and without fibrin as filler of the pore structure were characterized both dry and immersed in liquid water. It is observed that the there is a strong increase from 100 to 500 in the number of loading cycles before collapse in the samples tested in immersed conditions due to the more uniform stress distributions within the samples, the fibrin loading playing a minor role in the mechanical performance of the scaffolds

Use efficiency of variable rate of nitrogen prescribed by optical sensor in corn

ABSTRACT The efficiency of nitrogen fertilizer in corn is usually low, negatively affecting plant nutrition, the economic return, and the environment. In this context, a variable rate of nitrogen, prescribed by crop sensors, has been proposed as an alternative to the uniform rate of nitrogen traditionally used by farmers. This study tested the hypothesis that variable rate of nitrogen, prescribed by optical sensor, increases the nitrogen use efficiency and grain yield as compared to uniform rate of nitrogen. The following treatments were evaluated: 0; 70; 140; and 210 kg ha-1 under uniform rate of nitrogen, and 140 kg ha -1 under variable rate of nitrogen. The nitrogen source was urea applied on the soil surface using a distributor equipped with the crop sensor. In this study, the grain yield ranged from 10.2 to 15.5 Mg ha-1, with linear response to nitrogen rates. The variable rate of nitrogen increased by 11.8 and 32.6% the nitrogen uptake and nitrogen use efficiency, respectively, compared to the uniform rate of nitrogen. However, no significant increase in grain yield was observed, indicating that the major benefit of the variable rate of nitrogen was reducing the risk of environmental impact of fertilizer.

Da criação de uma Ordem Profissional

O objetivo central deste estudo é a análise da perspetiva dos Assistentes Sociais sobre a necessidade/ importância da criação de uma Ordem Profissional e, consequentemente de um Código Deontológico (português) para a profissão. Privilegiou-se a investigação qualitativa, construída a partir da interpretação das narrativas das entrevistas, da pesquisa bibliografia e documental. O carácter qualitativo do trabalho concretiza-se por meio de uma lógica abdutiva, que pretende compreender a realidade através da construção dos seus atores (Blaikie, 2000). Para o efeito construímos duas dimensões de análise: a primeira refere-se à análise e compreensão da necessidade de criação de uma Ordem Profissional e a segunda dimensão integra a análise da opinião dos informantes sobre a necessidade de criação de um código deontológico português. Os resultados obtidos nesta investigação demonstram de forma unânime, a importância da criação de uma Ordem Profissional para a legitimação, representatividade e autorregulação da categoria profissional. Nas razões apontadas para a importância da Ordem surgem, quer justificações que se centram na necessidade de uniformização da prática, demonstrando uma visão mais burocrática e tecnicista da profissão, no qual os métodos se sobrepõem à relação, quer razões de legitimação e de necessidade de representação coletiva junto à classe política, relacionada com uma vertente humanista, no qual os aspetos relacionais e comportamentais devem fazer parte da prática profissional de forma a uma maior adequação dos mecanismos de intervenção no indivíduo. Nas razões apontadas para o insucesso da não criação de uma Ordem Profissional, a maioria realçou motivos internos e externos inerentes à profissão. A questão interna tem a ver com a falta de associativismo e união dos Assistentes Sociais em se mobilizarem por uma causa comum. A questão externa relaciona-se com interesses políticos, bem como a questão coletiva dos profissionais. Os princípios subjacentes a um código deontológico são os inerentes aos direitos humanos e justiça social e de atitudes associadas à profissão.

Capacity Enhancement Using MIMO Antenna Arrays in Realistic Macro-Cellular Urban Environment

In MIMO systems the antenna array configuration in the BS and MS has a large influence on the available channel capacity. In this paper, we first introduce a new Frequency Selective (FS) MIMO framework for macro-cells in a realistic urban environment. The MIMO channel is built over a previously developed directional channel model, which considers the terrain and clutter information in the cluster, line-of-sight and link loss calculations. Next, MIMO configuration characteristics are investigated in order to maximize capacity, mainly the number of antennas, inter-antenna spacing and SNR impact. Channel and capacity simulation results are presented for the city of Lisbon, Portugal, using different antenna configurations. Two power allocations schemes are considered, uniform distribution and FS spatial water-filling. The results suggest optimized MIMO configurations, considering the antenna array size limitations, specially at the MS side.

Grid structure impact in sparse point representation of derivatives

In the Sparse Point Representation (SPR) method the principle is to retain the function data indicated by significant interpolatory wavelet coefficients, which are defined as interpolation errors by means of an interpolating subdivision scheme. Typically, a SPR grid is coarse in smooth regions, and refined close to irregularities. Furthermore, the computation of partial derivatives of a function from the information of its SPR content is performed in two steps. The first one is a refinement procedure to extend the SPR by the inclusion of new interpolated point values in a security zone. Then, for points in the refined grid, such derivatives are approximated by uniform finite differences, using a step size proportional to each point local scale. If required neighboring stencils are not present in the grid, the corresponding missing point values are approximated from coarser scales using the interpolating subdivision scheme. Using the cubic interpolation subdivision scheme, we demonstrate that such adaptive finite differences can be formulated in terms of a collocation scheme based on the wavelet expansion associated to the SPR. For this purpose, we prove some results concerning the local behavior of such wavelet reconstruction operators, which stand for SPR grids having appropriate structures. This statement implies that the adaptive finite difference scheme and the one using the step size of the finest level produce the same result at SPR grid points. Consequently, in addition to the refinement strategy, our analysis indicates that some care must be taken concerning the grid structure, in order to keep the truncation error under a certain accuracy limit. Illustrating results are presented for 2D Maxwell's equation numerical solutions.

Tuning Iris Recognition for Noisy Images

The use of iris recognition for human authentication has been spreading in the past years. Daugman has proposed a method for iris recognition, composed by four stages: segmentation, normalization, feature extraction, and matching. In this paper we propose some modifications and extensions to Daugman's method to cope with noisy images. These modifications are proposed after a study of images of CASIA and UBIRIS databases. The major modification is on the computationally demanding segmentation stage, for which we propose a faster and equally accurate template matching approach. The extensions on the algorithm address the important issue of pre-processing that depends on the image database, being mandatory when we have a non infra-red camera, like a typical WebCam. For this scenario, we propose methods for reflection removal and pupil enhancement and isolation. The tests, carried out by our C# application on grayscale CASIA and UBIRIS images show that the template matching segmentation method is more accurate and faster than the previous one, for noisy images. The proposed algorithms are found to be efficient and necessary when we deal with non infra-red images and non uniform illumination.

A moda e o traje militar no século XVII

O traje militar, em geral, e em Portugal, em particular, teve uma enorme evolução no século XVII. Foi nesta centúria que se deram as primeiras tentativas em Portugal de introduzir e regular os uniformes. Paralelamente verifica-se que a indumentária militar sofreu de fortes influências da Moda vigente. ABSTRACT - The military costume had an enormous evolution in the seventeenth century. It was in this century that the first attempts were made to introduce the uniforms in Portugal. It appears that the military outfit suffered from strong influences from fashion.

General Ribeiro Arthur militar e artista

Ribeiro Arthur foi militar, crítico de Arte e foi sobretudo um dos mais importantes investigadores e ilustradores da história dos uniformes em Portugal. Produziu um número muito significativo de aguarelas dedicadas a este tema que, reunidas em colecção, estão preservadas no Arquivo Histórico Militar. ABSTRACT - Artur Ribeiro Arthur was military, art critic and was one of the most important researchers and illustrators in the history of the uniforms in Portugal. He produced a significant number of watercolors dedicated to this theme, gathered in collections that are kept in the Military Historical Archive.

A moda e o traje militar

RESUMO - A introdução do Uniforme nas forças armadas em Portugal deu-se no século XVII e este é claramente influenciado e por vezes mesmo condicionado pelo vestuário civil e pelas modas em voga.