The design and evaluation of distributed virtual environment to support learning in global operations management

The primary goal of this research is to design and develop an education technology to support learning in global operations management. The research implements a series of studies to determine the right balance among user requirements, learning methods and applied technologies, on a view of student-centred learning. This research is multidisciplinary by nature, involving topics from various disciplines such as global operations management, curriculum and contemporary learning theory, and computer aided learning. Innovative learning models that emphasise on technological implementation are employed and discussed throughout this research.

Good practice guide in learning and teaching

Once again this publication is produced to celebrate and promote good teaching and learning support and to offer encouragement to those imaginative and innovative staff who continue to wish to challenge students to learn to maximum effect. It is hoped that others will pick up some good ideas from the articles contained in this volume. We have again changed our approach for this 2006/07 edition (our fourth) of the Aston Business School Good Practice Guide. As before, some contributions were selected from those identifying interesting best practice on their Annual Module reflection forms in 2005/2006. Other contributors received HELM (Research Centre in Higher Education Learning and Management) small research grants in 2005/2006. Part of the conditions were for them to write an article for this publication. We have also been less tight on the length of the articles this year. Some contributions are, therefore, on the way to being journal articles. HELM will be working with these authors to help develop these for publication. The themes covered in this year?s articles are all central to the issues faced by those providing HE teaching and learning opportunities in the 21st Century. Specifically this is providing support and feedback to students in large classes, embracing new uses of technology to encourage active learning and addressing cultural issues in a diverse student population. Michael Grojean and Yves Guillaume used Blackboard™ to give a more interactive learning experience and improve feedback to students. It would be easy for other staff to adopt this approach. Patrick Tissington and Qin Zhou (HELM small research grant holders) were keen to improve the efficiency of student support, as does Roger McDermott. Celine Chew shares her action learning project, completed as part of the Aston University PG Certificate in Teaching and Learning. Her use of Blackboard™ puts emphasis on the learner having to do something to help them meet the learning outcomes. This is what learning should be like, but many of our students seem used to a more passive learning experience, so much needs to be done on changing expectations and cultures about learning. Regina Herzfeldt also looks at cultures. She was awarded a HELM small research grant and carried out some significant new research on cultural diversity in ABS and what it means for developing teaching methods. Her results fit in with what many of us are experiencing in practice. Gina leaves us with some challenges for the future. Her paper certainly needs to be published. This volume finishes with Stuart Cooper and Matt Davies reflecting on how to keep students busy in lectures and Pavel Albores working with students on podcasting. Pavel?s work, which was the result of another HELM small research grant, will also be prepared for publication as a journal article. The students learnt more from this work that any formal lecture and Pavel will be using the approach again this year. Some staff have been awarded HELM small research grants in 2006/07 and these will be published in the next Good Practice Guide. In the second volume we mentioned the launch of the School?s Research Centre in Higher Education Learning and Management (HELM). Since then HELM has stimulated a lot of activity across the School (and University) particularly linking research and teaching. A list of the HELM seminars for 2006/2007 is listed as Appendix 1 of this publication. Further details can be obtained from Catherine Foster (c.s.foster@aston.ac.uk), who coordinates the HELM seminars. For 2006 and 2005 HELM listed, 20 refereed journal articles, 7 book chapters, 1 published conference papers, 20 conference presentations, two official reports, nine working papers and £71,535 of grant money produced in this research area across the School. I hope that this shows that reflection on learning is alive and well in ABS. We have also been working on a list of target journals to guide ABS staff who wish to publish in this area. These are included as Appendix 2 of this publication. May I thank the contributors for taking time out of their busy schedules to write the articles and to Julie Green, the Quality Manager, for putting the varying diverse approaches into a coherent and publishable form and for agreeing to fund the printing of this volume.

Good practice guide in learning and teaching

Once again this publication is produced to celebrate and promote good teaching and learning support and to offer encouragement to those imaginative and innovative staff who continue to wish to challenge students to learn to maximum effect. It is hoped that others will pick up some good ideas from the articles contained in this volume. We had changed our editorial approach in drawing together the articles for this 2005/6 edition (our third) of the ABS Good Practice Guide. Firstly we have expanded our contributors beyond ABS academics. This year?s articles have also been written by staff from other areas of the University, a PhD student, a post-doctoral researcher and staff working in learning support. We see this as an acknowledgement that the learning environment involves a range of people in the process of student support. We have also expanded the maximum length of the articles from two to five pages, in order to allow greater reflection on the issues. The themes of the papers cluster around issues relating to diversity (widening participation and internationalisation of the student body), imaginative use of new technology (electronic reading on BlackboardTM ) and reflective practitioners, (reflection on rigour and relevance; on how best to train students in research ethics, relevance in the curriculum and the creativity of the teaching process) Discussion of efforts to train the HE teachers of the future looks forward to the next academic year when the Higher Education Academy?s professional standards will be introduced across the sector. In the last volume we mentioned the launch of the School?s Research Centre in Higher Education Learning and Management (HELM). Since then HELM has stimulated a lot of activity across the School (and University) particularly linking research and teaching. A list of the HELM seminars is listed as an appendix to this publication. Further details can be obtained from Catherine Foster (c.s.foster@aston.ac.uk) who coordinates the HELM seminars. HELM has also won its first independent grant from the EU Leonardo programme to look at the effect of business education on employment. In its annual report to the ABS Research Committee HELM listed for 2004 and 2005, 11 refereed journal articles, 4 book chapters, 3 published conference papers, 18 conference papers, one official reports and £72,500 of grant money produced in this research area across the School. I hope that this shows that reflection on learning is live and well in ABS. May I thank the contributors for taking time out of their busy schedules to write the articles and to Julie Green, the Quality Manager, for putting our diverse approaches into a coherent and publishable form.

Foreign direct investment, technology sourcing and reverse spillovers

Recent theoretical work points to the possibility of foreign direct investment motivated not by 'ownership' advantages which may be exploited by a multinational enterprise but by the desire to access the superior technology of a host nation through direct investment. To be successful, technology sourcing foreign direct investment hinges crucially on the existence of domestic-to-foreign technological externalities within the host country. We test empirically for the existence of such 'reverse spillover' effects for a panel of UK manufacturing industries. The results demonstrate that technology generated by the domestic sector spills over to foreign multinational enterprises, but that this effect is restricted to relatively research and development intensive sectors. There is also evidence that these spillover effects are affected by the spatial concentration of industry, and that learning-by-doing effects are restricted to sectors in which technology sourcing is unlikely to be a motivating influence.

From national innovation systems to national innovation capacity:internationalisation and technology transfer perspectives

The last decade or so has witnessed the emergence of the national innovation system (NIS) phenomenon. Since then, many scholars have investigated NIS and its implementation in different countries. However, there are very few investigations into the relationship between the NIS of a country and its national innovation capacity. This paper aims to make a contribution in this area by examining the link that currently exists between these two topics. Whilst examining this relationship, we also explore internationalisation and technology transfer, being cognate areas that have been investigated during the same period. This follows our assertion that the link between NIS and national innovation capacity is the mechanism of internationalisation and technology transfer. The NIS approach was introduced in the late 1980s (see Freeman, 1987; Dosi et al., 1988) and further elaborated later (see Lundvall, 1992; Nelson, 1993; Edquist, 1997). In essence, a country?s NIS is a historically grown subsystem of the entire national economy consisting of organisations and institutions which play a major role in the innovative activity in the country. In the NIS approach, interactions within organisations as well as the interplay between organisations and institutions are of central importance. The NIS approach has been used to reveal the structure of the innovation processes and the main actors involved in them in industrialised and emerging countries. Although the national focus remains strong, it has been accompanied by studies seeking to analyse the notion of systems of innovation at an international level and at a sub-national scale (Archibugi et al., 1999). Dosi in the edition of Archibugi et al. (1999) argues that the general background of the discussion of national systems is the observation of non-random distributions across countries of: corporate capabilities; organisational forms; strategies; and ultimately revealed performances, in terms of production efficiency and inputs productivities, rates of innovation, rates of adoption/diffusion of innovation themselves, dynamics of market shares on the world markets, growth of income and employment. They also mention that there are several approaches to NIS. Nelson (1993) focuses upon the specificities of national institutions and policies supporting directly or indirectly innovation, diffusion and skills accumulation. Patel and Pavitt (1991) have stressed the links between the national patterns of technological accumulation and the competencies and innovative strategies of a few major national companies. Amable et al (1997) and Soskice (1993) and Zysman (1994) focus on the specifics of national institutions including, for example, the forms of organization, financial and labour markets, training institutions, forms of state intervention in the economy etc. However, the most common reference is by Lundvall (1992) who argues that the focus on the national level is associated with the fact that national economies vary according to their production system and their institutional framework and these differences are in turn strengthened by different historical experiences, language and culture. On the other hand, the national innovation capability consists of abilities to create and carry new technological possibilities through to economic practice. The term covers a wide range of activities from capability to invent to capability to innovate and to capability to improve existing technology beyond the original design parameters (Kim, 1997). The term innovation is often associated by many with technological change at international frontiers. However, technological capability is not the same as innovation capability. Technological capability refers to assimilation, use, adaptation, and change to existing technologies. It also enables the creation of new technologies and development of new products and processes in response to changing economic environments. It denotes operational command over knowledge (Kim, 1997). It is manifested not merely by the knowledge possessed, but, more important, by the uses to which that knowledge can be put and by the proficiency with which it is applied in the activities of investment and production and in the creation of new knowledge (Westphal et al., 1985). Therefore, the analytical framework that is used in this paper is based on the way a country derives from its NIS a national innovation capacity. There are two perspectives that are identified on this way. These are internationalisation and technology transfer. Even though NIS is not directly related to national innovation capacity, to achieve national innovation capacity from NIS, the country should have the ability for technology transfer. Technology transfer is a link between these two phenomena. On the other hand, internationalisation can be either the input or the output of the relationship between NIS and national innovation capability. If a company is investing in a country because of its national innovation capacity, this can be regarded as an input to the relationship between NIS and national innovation capacity. If this company is investigating the national innovation capacity of a country then, for its internationalisation, the national innovation capacity should be important, which in turn means this company is active in innovation and innovation is also an important success factor. The interrelationship between the investment of the company and the NIS of the country (assuming that the country is competent and competitive in technology transfer) will generate and improve that country?s national innovation capacity. This is the output of internationalisation from the relationship between NIS and national innovation capacity. When companies are evaluating whether to internationalise, they investigate certain factors in the countries in which they are considering to invest. The ability to transfer technology is dependent on ability to adopt a new technology and also on the learning derived from this technology. If countries wish to attract innovation related investment they need to show their ability to have a NIS and also the capability to transfer technology. Without the technology transfer capability, the NIS is not functioning. Therefore, companies that internationalise will investigate the factors common to NIS, technology transfer, and their business needs. Through this paper we will demonstrate this link though its mechanisms. Our research will be through extensive literature review and identifying relevant aspects of previous research carried out by the authors. It will investigate certain factors of different countries that are successful in attracting innovation related foreign direct investment. Through these, we will point out the factors that are important for the link and mechanisms of NIS and national innovation capability.

ALEX®: a mobile Adult Literacy Experiential Learning application

An alarmingly high number of adults in the world's most developed countries are linguistically functionally illiterate. The research presented in this paper describes ALEX©, an ongoing attempt to successfully develop an innovative assistive, mobile, experiential language-learning application to support the daily literacy education and needs of such adults, anywhere, anytime. We introduce a set of guidelines we have collated to inform the design of mobile assistive technologies, introduce our application and describe the design activities to date that have led to the development of our current application. We present this overview in the hope that it is useful to others working in the fledgling domains of mobile assistive technology design and/or mobile experiential language-learning technologies.

Review of doctoral research in second-language teaching and learning in Australia (2003–2006)

This article reviews recent doctoral research in Australian universities in the area of language teaching and learning. Doctoral work in three main areas of research concentration is described: language teaching, language learning, and writing. The authors whose studies are reviewed are graduates of the Australian National University, Griffith University, Macquarie University, the University of Technology, Sydney, the University of Sydney, the University of New South Wales, the University of Melbourne, Monash University, La Trobe University, Deakin University and Murdoch University.

Content-based VLE designs improve learning efficiency in constructivist statistics education

Background: We introduced a series of computer-supported workshops in our undergraduate statistics courses, in the hope that it would help students to gain a deeper understanding of statistical concepts. This raised questions about the appropriate design of the Virtual Learning Environment (VLE) in which such an approach had to be implemented. Therefore, we investigated two competing software design models for VLEs. In the first system, all learning features were a function of the classical VLE. The second system was designed from the perspective that learning features should be a function of the course's core content (statistical analyses), which required us to develop a specific-purpose Statistical Learning Environment (SLE) based on Reproducible Computing and newly developed Peer Review (PR) technology. Objectives: The main research question is whether the second VLE design improved learning efficiency as compared to the standard type of VLE design that is commonly used in education. As a secondary objective we provide empirical evidence about the usefulness of PR as a constructivist learning activity which supports non-rote learning. Finally, this paper illustrates that it is possible to introduce a constructivist learning approach in large student populations, based on adequately designed educational technology, without subsuming educational content to technological convenience. Methods: Both VLE systems were tested within a two-year quasi-experiment based on a Reliable Nonequivalent Group Design. This approach allowed us to draw valid conclusions about the treatment effect of the changed VLE design, even though the systems were implemented in successive years. The methodological aspects about the experiment's internal validity are explained extensively. Results: The effect of the design change is shown to have substantially increased the efficiency of constructivist, computer-assisted learning activities for all cohorts of the student population under investigation. The findings demonstrate that a content-based design outperforms the traditional VLE-based design. © 2011 Wessa et al.

Does reviewing lead to better learning and decision making? Answers from a randomized stock market experiment

Background - The literature is not univocal about the effects of Peer Review (PR) within the context of constructivist learning. Due to the predominant focus on using PR as an assessment tool, rather than a constructivist learning activity, and because most studies implicitly assume that the benefits of PR are limited to the reviewee, little is known about the effects upon students who are required to review their peers. Much of the theoretical debate in the literature is focused on explaining how and why constructivist learning is beneficial. At the same time these discussions are marked by an underlying presupposition of a causal relationship between reviewing and deep learning. Objectives - The purpose of the study is to investigate whether the writing of PR feedback causes students to benefit in terms of: perceived utility about statistics, actual use of statistics, better understanding of statistical concepts and associated methods, changed attitudes towards market risks, and outcomes of decisions that were made. Methods - We conducted a randomized experiment, assigning students randomly to receive PR or non–PR treatments and used two cohorts with a different time span. The paper discusses the experimental design and all the software components that we used to support the learning process: Reproducible Computing technology which allows students to reproduce or re–use statistical results from peers, Collaborative PR, and an AI–enhanced Stock Market Engine. Results - The results establish that the writing of PR feedback messages causes students to experience benefits in terms of Behavior, Non–Rote Learning, and Attitudes, provided the sequence of PR activities are maintained for a period that is sufficiently long.

Heritage and innovative learning approaches:an alternative approach to engineering education

Over recent years, the role of engineering in promoting a sustainable society has received much public attention [1] with particular emphasis given to the need to promote the future prosperity and security of society through the recruitment and education of more engineers [2,3]. From an employment perspective, the Leitch Review [4] suggested that ‘generic’ transferable employability skills development should constitute a more substantial part of university education. This paper argues that the global drivers impacting engineering education [5] correlate strongly to those underpinning the Leitch review, therefore the question of how to promote transferable employability skills within the wider engineering curriculum is increasingly relevant. By exploring the use of heritage in the engineering curriculum as a way to promote learning and engage students, a less familiar approach to study is discussed. This approach moves away from stereotypical notions of the use of information technology as representing the pinnacle of innovation in education. Taking the student experience as its starting point, the paper draws upon the findings of an exploratory study critically analysing the pedagogical value of using heritage in engineering education. It discusses a teaching approach in which engineering students are taken out of their ‘comfort zone’ - away from the classroom, laboratory and computer, to a heritage site some 100 miles away from the university. The primary learning objective underpinning this approach is to develop students’ transferable skills by encouraging them to consider how to apply theoretical concepts to a previously unexplored situation. By reflecting upon students’ perceptions of the value of this approach, and by identifying how heritage may be utilised as an innovative learning and teaching approach in engineering education, this paper makes a notable contribution to current pedagogical debates in the discipline.