Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

OBJECTIVES: (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS: Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS: There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE: The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.

Assessment of diesel exhaust particulate exposure and surface characteristics in association with levels of oxidative stress biomarkers

Exposure to PM10 and PM2.5 (particulate matter with aerodynamic diameter smaller than 10 μm and 2.5 μm, respectively) is associated with a range of adverse health effects, including cancer, pulmonary and cardiovascular diseases. Surface characteristics (chemical reactivity, surface area) are considered of prime importance to understand the mechanisms which lead to harmful effects. A hypothetical mechanism to explain these adverse effects is the ability of components (organics, metal ions) adsorbed on these particles to generate Reactive Oxygen Species (ROS), and thereby to cause oxidative stress in biological systems (Donaldson et al., 2003). ROS can attack almost any cellular structure, like DNA or cellular membrane, leading to the formation of a wide variety of degradation products which can be used as a biomarker of oxidative stress. The aim of the present research project is to test whether there is a correlation between the exposure to Diesel Exhaust Particulate (DEP) and the oxidative stress status. For that purpose, a survey has been conducted in real occupational situations where workers were exposed to DEP (bus depots). Different exposure variables have been considered: - particulate number, size distribution and surface area (SMPS); - particulate mass - PM2.5 and PM4 (gravimetry); - elemental and organic carbon (coulometry); - total adsorbed heavy metals - iron, copper, manganese (atomic adsorption); - surface functional groups present on aerosols (Knudsen flow reactor). (Demirdjian et al., 2005). Several biomarkers of oxidative stress (8-hydroxy-2'-deoxyguanosine and several aldehydes) have been determined either in urine or serum of volunteers. Results obtained during the sampling campaign in several bus depots indicated that the occupational exposure to particulates in these places was rather low (40-50 μg/m3 for PM4). Size distributions indicated that particles are within the nanometric range. Surface characteristics of sampled particles varied strongly, depending on the bus depot. They were usually characterized by high carbonyl and low acidic sites content. Among the different biomarkers which have been analyzed within the framework of this study, mean levels of 8- hydroxy-2'-deoxyguanosine and several aldehydes (hexanal, heptanal, octanal, nonanal) increased during two consecutive days of exposure for non-smokers. In order to bring some insight into the relation between the particulate characteristics and the formation of ROS by-products, biomarkers levels will be discussed in relation with exposure variables.

Evaporation from a shallow water table: Diurnal dynamics of measured and simulated water and heat regime at the vicinity of a drying sand surface

Accurate estimates of water losses by evaporation from shallow water tables are important for hydrological, agricultural, and climatic purposes. An experiment was conducted in a weighing lysimeter to characterize the diurnal dynamics of evaporation under natural conditions. Sampling revealed a completely dry surface sand layer after 5 days of evaporation. Its thickness was <1 cm early in the morning, increasing to reach 4?5 cm in the evening. This evidence points out fundamental limitations of the approaches that assume hydraulic connectivity from the water table up to the surface, as well as those that suppose monotonic drying when unsteady conditions prevail. The computed vapor phase diffusion rates from the apparent drying front based on Fick's law failed to reproduce the measured cumulative evaporation during the sampling day. We propose that two processes rule natural evaporation resulting from daily fluctuations of climatic variables: (i) evaporation of water, stored during nighttime due to redistribution and vapor condensation, directly into the atmosphere from the soil surface during the early morning hours, that could be simulated using a mass transfer approach and (ii) subsurface evaporation limited by Fickian diffusion, afterward. For the conditions prevailing during the sampling day, the amount of water stored at the vicinity of the soil surface was 0.3 mm and was depleted before 11:00. Combining evaporation from the surface before 11:00 and subsurface evaporation limited by Fickian diffusion after that time, the agreement between the estimated and measured cumulative evaporation was significantly improved.

Combined transesophageal and surface MRI provides optimal imaging in aortic atherosclerosis.

OBJECTIVE: Surface magnetic resonance imaging (MRI) for aortic plaque assessment is limited by the trade-off between penetration depth and signal-to-noise ratio (SNR). For imaging the deep seated aorta, a combined surface and transesophageal MRI (TEMRI) technique was developed 1) to determine the individual contribution of TEMRI and surface coils to the combined signal, 2) to measure the signal improvement of a combined surface and TEMRI over surface MRI, and 3) to assess for reproducibility of plaque dimension analysis. METHODS AND RESULTS: In 24 patients six black blood proton-density/T2-weighted fast-spin echo images were obtained using three surface and one TEMRI coil for SNR measurements. Reproducibility of plaque dimensions (combined surface and TEMRI) was measured in 10 patients. TEMRI contributed 68% of the signal in the aortic arch and descending aorta, whereas the overall signal gain using the combined technique was up to 225%. Plaque volume measurements had an intraclass correlation coefficient of as high as 0.97. CONCLUSION: Plaque volume measurements for the quantification of aortic plaque size are highly reproducible for combined surface and TEMRI. The TEMRI coil contributes considerably to the aortic MR signal. The combined surface and TEMRI approach improves aortic signal significantly as compared to surface coils alone. CONDENSED ABSTRACT: Conventional MRI aortic plaque visualization is limited by the penetration depth of MRI surface coils and may lead to suboptimal image quality with insufficient reproducibility. By combining a transesophageal MRI (TEMRI) with surface MRI coils we enhanced local and overall image SNR for improved image quality and reproducibility.

Oligopotent stem cells are distributed throughout the mammalian ocular surface.

The integrity of the cornea, the most anterior part of the eye, is indispensable for vision. Forty-five million individuals worldwide are bilaterally blind and another 135 million have severely impaired vision in both eyes because of loss of corneal transparency; treatments range from local medications to corneal transplants, and more recently to stem cell therapy. The corneal epithelium is a squamous epithelium that is constantly renewing, with a vertical turnover of 7 to 14 days in many mammals. Identification of slow cycling cells (label-retaining cells) in the limbus of the mouse has led to the notion that the limbus is the niche for the stem cells responsible for the long-term renewal of the cornea; hence, the corneal epithelium is supposedly renewed by cells generated at and migrating from the limbus, in marked opposition to other squamous epithelia in which each resident stem cell has in charge a limited area of epithelium. Here we show that the corneal epithelium of the mouse can be serially transplanted, is self-maintained and contains oligopotent stem cells with the capacity to generate goblet cells if provided with a conjunctival environment. Furthermore, the entire ocular surface of the pig, including the cornea, contains oligopotent stem cells (holoclones) with the capacity to generate individual colonies of corneal and conjunctival cells. Therefore, the limbus is not the only niche for corneal stem cells and corneal renewal is not different from other squamous epithelia. We propose a model that unifies our observations with the literature and explains why the limbal region is enriched in stem cells.

Variation of the Chlorophyll a Related to Sea Surface Temperature, Wind and Geostrophic Currents in the Cape Verde Region Using Satellite Data

We present a comparative analysis of satellite derived climatologies in the Cape Verde region (CV). In order to establish chlorophyll a variability, in relation to other oceanographic phenomena, a set of, relatively long (from five to eight years), time series of chlorophyll a, sea surface temperature, wind and geostrophic currents, were ensembled for the Eastern Central Atlantic (ECA). We studied seasonal and inter-annual variability of phytoplankton concentration, in relation to the rest of the variables, with a special focus in CV. We compared the situation within the archipelago with those of the surrounding marine environments, such as the North West African Upwelling (NWAU), North Atlantic Subtropical Gyre (NASTG), North Equatorial Counter Current (NECC) and Guinea Dome (GD). At the seasonal scale, CV region behaves partly as the surrounding areas, nevertheless, some autochthonous features were also found. The maximum peak of the pigment having a positive correlation with temperature is found at the end of the year for all the points in the archipelago; a less remarkable rise with negative correlation is also detected in February for points CV2 and CV4. This is behavior that none of the surrounding environments have shown. This enrichment was found to be preceded by a drastic drop in wind intensity (SW Monsoon) during summer months. The inter-annual analysis shows a tendency for decreasing of the chlorophyll a concentration.

Variation of the Chlorophyll a Related to Sea Surface Temperature, Wind and Geostrophic Currents in the Cape Verde Region Using Satellite Data

We present a comparative analysis of satellite derived climatologies in the Cape Verde region (CV). In order to establish chlorophyll a variability, in relation to other oceanographic phenomena, a set of, relatively long (from five to eight years), time series of chlorophyll a, sea surface temperature, wind and geostrophic currents, were ensembled for the Eastern Central Atlantic (ECA). We studied seasonal and inter-annual variability of phytoplankton concentration, in relation to the rest of the variables, with a special focus in CV. We compared the situation within the archipelago with those of the surrounding marine environments, such as the North West African Upwelling (NWAU), North Atlantic Subtropical Gyre (NASTG), North Equatorial Counter Current (NECC) and Guinea Dome (GD). At the seasonal scale, CV region behaves partly as the surrounding areas, nevertheless, some autochthonous features were also found. The maximum peak of the pigment having a positive correlation with temperature is found at the end of the year for all the points in the archipelago; a less remarkable rise with negative correlation is also detected in February for points CV2 and CV4. This is behavior that none of the surrounding environments have shown. This enrichment was found to be preceded by a drastic drop in wind intensity (SW Monsoon) during summer months. The inter-annual analysis shows a tendency for decreasing of the chlorophyll a concentration.

Hidrossedimentologia e disponibilidade hídrica da bacia hidrográfica da Barragem de Poilão

TEIXEIRA, José João Lopes. Departamento de Engenharia Agrícola, Centro de Ciências Agrárias da Universidade Federal do Ceará, Agosto de 2011. Hidrossedimentologia e disponibilidade hídrica da bacia hidrográfica da Barragem de Poilão, Cabo Verde. Orientador: José Carlos de Araújo. Examinadores: George Leite Mamede, Pedro Henrique Augusto Medeiros. O Arquipélago de Cabo Verde, situado na costa ocidental africana, sofre influência do deserto de Saara tornando o clima caraterizado por pluviometria muito baixa e distribuída irregularmente no espaço e no tempo. As chuvas são muito concentradas, gerando grandes escoamentos para o mar. O aumento da disponibilidade hídrica requer além da construção e manutenção de infraestrutura de captação e conservação de águas pluviais, uma gestão eficiente destes recursos. Atualmente, constitui um dos eixos estratégicos da política do estado de Cabo Verde, a captação, armazenamento e mobilização de águas superficiais através de construção de barragens. Estudos do comportamento hidrológico e sedimentológico do reservatório e da sua bacia de contribuição constituem premissas básicas para um ótimo dimensionamento, gestão e monitoramento da referida infraestrutura. É neste sentido que o presente estudo objetivou sistematizar informações hidrológicas e sedimentológicas da bacia hidrográfica da Barragem de Poilão (BP) e apresentar proposta operacional de longo prazo. A área de estudo ocupa 28 km² a montante da Bacia Hidrográfica da Ribeira Seca (BHRS) na Ilha de Santiago. A altitude da bacia varia de 99 m, situada na cota da barragem, até 1394 m. Para o estudo, foram utilizados e sistematizados, série pluviométrica de 1973 a 2010, registos de vazão instantânea do período 1984 a 2000 e registos agroclimáticos da área de estudo (1981 a 2004). Para o preenchimento das falhas tanto dos escoamentos como da descarga sólida em suspensão, foi utilizado o método de curva chave. Para estimativa de produção de sedimentos na bacia, aplicou-se a Equação Universal de Perda de Solo (USLE) e a razão de aporte de sedimentos (SDR). O índice de retenção de sedimentos no reservatório foi estimado pelo método de Brune e a distribuição de sedimento pelo método empírico de redução de área descrito por Borland e Miller e, revisado por Lara. Para gerar e simular curvas de vazão versus garantia foi utilizado código computacional VYELAS, desenvolvido por Araújo e baseado na abordagem de Campos. Também foi avaliada a redução da vazão de retirada do período 2006 a 2026, provocado pelo assoreamento do reservatório. Concluiu-se que em média a precipitação anual é de 323 mm, concentrando-se 73% nos meses de agosto e setembro; a bacia de contribuição apresenta como valor um número de curva (CN) de 76, com abstração inicial (Ia) de 26 mm, coeficiente de escoamento de 19% e uma vazão anual afluente de 1,7 hm³(cv= 0,73); a disponibilidade hídrica para uma garantia de 85% é avaliada em 0,548 hm³/ano e não 0,671 hm³/ano como indica o projeto original. Com uma descarga sólida estimada em 22.185 m³/ano conclui-se que até o ano de 2026, a capacidade do reservatório reduz a uma taxa de 1,8 % ao ano, devido ao assoreamento, provocando uma redução de 41% da disponibilidade hídrica inicial. Nessa altura, as perdas por evaporação e sangria serão da ordem de 81% da vazão afluente de entrada no reservatório. Na base desses resultados se apresentou proposta de operação da BP.

Érosion des sols au Cap Vert : étude des processus et quantification à l’échelle de trois bassins versants de l’île de Santiago

Erosão dos solos em Cabo Verde: estudo dos processos e quantificação à escala de três bacias hidrográficas O arquipélago de Cabo Verde é constituído por 10 ilhas vulcânicas pertence à zona do Sahel que se estende do Atlântico ao Mar Vermelho. Desde então, várias décadas, Cabo Verde é afectado pela desertificação causada principalmente pela recessão climatica e a erosão do solo. Esses fatores, aliados à alta pressão humana sobre os recursos, a topografia acidentada e chuvas tropicais por vezes torrenciais, causam sérios danos aos solos. No entanto, desde sua independência em 1975, o Governo realizou um amplo programa de arborização, recuperação de áreas degradadas e a correcção dos leitos das ribeiras. No entanto, a investigação, muito pouco foi realizada para avaliar as acções de protecção e conservação do solo e da água. Portanto, não há dados sobre o problema da degradação das terras nem balanços. Como parte deste trabalho, foram estudados vários factores que controlam a erosão do solo pela água. Especificamente, buscou-se diferenciar os efeitos das actividades humanas, incluindo a agricultura, os factores climáticos, como chuva e geração de escoamento. Também estabeleceu os primeiros balanços das exportações de matérias em suspensão e em solução no contexto do arquipélago de Cabo Verde. O estudo foi realizado em três bacias hidrográficas da ilha de Santiago, Cabo Verde. Estas três bacias hidrográficas (Longueira, Grande e Godim) estão localizadas na parte central da ilha de Santiago e representam os diversos tipos de uso da terra e as diferentes zonas bioclimaticas da ilha. Existe um gradiente climático entre as três bacias hidrográficas. Na verdade, Longueira que abrange uma área de 4,18 km2, tem um declive médio de 47 %, uma zona florestada de 69% e uma área agrícola de 17 %. Grande com uma área de 1,87 km2, é localizada numa zona sub humida com um declive médio de 50%, é essencialmente agrícola. Godim, com uma área de 2,0 km2, é localizado numa zona semi-árida com um declive médio de 32%, é particularmente uma zona agricola. Para estes três bacias hidrográficas, as cheias foram medidas e amostradas de 2004 a 2009. A bacia de Longueira teve um maior acompanhamento, nomeadamente em termos de amostragem e monitoramento dos escoamentos. Em cada amostra foram feitas a determinação da concentração de matérias em suspensão e a análise dos principais elementos quimicos. Os resultados mostram que a erosão mecânica nas três bacias hidrográficas é caracterizada por uma forte variabilidade espacial e temporal. Durante o período de 2005-2009, o balanço anual média para as bacias hidrográficas de Longueira, Grande e Godim é: 4266, 157 e 10,1 t.km2.an-1, respectivamente. A estação das chuvas de 2006 foi a mais erosiva para as três bacias, particularmente em Longueira, com 2 cheias excepcionais, que têm gerado uma concentração média de sólidos em suspensão superior a 100 g / l. Porém, as estações do ano de 2005 e 2008 foram de uma forma geral menos erosivas porque as concentrações médias não inferiores a 20 g / l. Além disso, não houve cheias para as temporadas 2005 e 2007 para a bacia do Godim. Na bacia de Longueira, o estudo dos fenómenos de histerese na caracterização das cheias mostrou que a evolução temporal das exportações de sólidos em suspensão durante a temporada é fortemente influenciada pelas atividades agrícolas. Na verdade, a primeira cheia causou uma exportação maciça de sedimento disponível e localizado no leito da ribeira. Assim, a segunda cheia exportou menos sedimentos. Um mês após as primeiras chuvas, a prática da monda que reduz a densidade da cobertura vegetal e destructura a camada superficial do solo, gerou uma grande quantidade de sedimento que novamente permitiu uma exportação muito forte de sedimentos durante a terceira forte cheia. Os resultados da erosão química na bacia de Longueira indicam que a taxa de erosão é de 45 t.km2.an-1 com uma forte variabilidade temporal. Na verdade, as temporadas de 2006 e 2007 são as mais erosivas, enquanto 2005 teve uma exportação de matérias disolvidas baixa. A utilização do modelo EMMA (End- Members Mixing Analysis) mostra que os escoamentos hipodermico e profundo, alimentandos os fluxos de elementos dissolvidos são os principais factores da erosão química. É mostrado que esses fluxos causam mais de 90% dos fluxos de erosão química. O escoamento superficial, que contribui com cerca de 70% na formação das cheias, é o maior factor da erosão mecânica do solo.

Staphylococcal biofilm formation on the surface of three different calcium phosphate bone grafts: a qualitative and quantitative in vivo analysis.

Differences in physico-chemical characteristics of bone grafts to fill bone defects have been demonstrated to influence in vitro bacterial biofilm formation. Aim of the study was to investigate in vivo staphylococcal biofilm formation on different calcium phosphate bone substitutes. A foreign-body guinea-pig infection model was used. Teflon cages prefilled with β-tricalcium phosphate, calcium-deficient hydroxyapatite, or dicalcium phosphate (DCP) scaffold were implanted subcutaneously. Scaffolds were infected with 2 × 10(3) colony-forming unit of Staphylococcus aureus (two strains) or S. epidermidis and explanted after 3, 24 or 72 h of biofilm formation. Quantitative and qualitative biofilm analysis was performed by sonication followed by viable counts, and microcalorimetry, respectively. Independently of the material, S. aureus formed increasing amounts of biofilm on the surface of all scaffolds over time as determined by both methods. For S. epidermidis, the biofilm amount decreased over time, and no biofilm was detected by microcalorimetry on the DCP scaffolds after 72 h of infection. However, when using a higher S. epidermidis inoculum, increasing amounts of biofilm were formed on all scaffolds as determined by microcalorimetry. No significant variation in staphylococcal in vivo biofilm formation was observed between the different materials tested. This study highlights the importance of in vivo studies, in addition to in vitro studies, when investigating biofilm formation of bone grafts.

Historic Alteration of Surface Hydrology on the Des Moines Lobe, 2001

Water fact sheet for Iowa Department of Natural Resources and the Geological Bureau.

VARIABILITY OF PHENOTYPIC, PROTEOMIC AND TRANSCRIPTOMIC EXPRESSION OF STAPHYLOCOCCUS AUREUS SURFACE ADHESINS

Staphylococcus aureus is a highly successful pathogen responsible of a wide variety of diseases, from minor skin infection to life-threatening sepsis or infective endocarditis, as well as food poisoning and toxic shock syndrome. This heterogeneity of infections and the ability of S. aureus to develop antibiotic-resistance to virtually any available drugs reflect its extraordinary capacity to adapt and survive in a great variety of environments. The pathogenesis of S. aureus infection involves a wide range of cell wall-associated adhesins and extracellular toxins that promote host colonization and invasion. In addition, S. aureus is extremely well equipped with regulatory systems that sense environmental conditions and respond by fine tuning the expression of metabolic and virulence determinants. Surface adhesins referred to MSCRAMMs - for Microbial Surface Component Recognizing Adherence Matrix Molecules - mediate binding to the host extracellular matrix or serum components, including fibrinogen, fibronectin, collagen and elastin, and promote tissue colonization and invasion. Major MSCRAMMs include a family of surface-attached proteins covalently bound to the cell wall peptidoglycan via a conserved LPXTG motif. Genomic analyses indicate that S. aureus contain up to 22 LPXTG surface proteins, which could potentially act individually or in synergy to promote infection. In the first part of this study we determined the range of adherence phenotypes to fibrinogen and fibronectin among 30 carriage isolates of S. aureus and compared it to the adherence phenotypes of 30 infective endocarditis and 30 blood culture isolates. Overall there were great variations in in vitro adherence, but no differences were observed between carriage and infection strains. We further determined the relation between in vitro adherence and in vivo infectivity in a rat model of experimental endocarditis, using 4 isolates that displayed either extremely low or high adherence phenotypes. Unexpectedly, no differences were observed between the in vivo infectivity of isolates that were poorly and highly adherent in vitro. We concluded that the natural variability of in vitro adherence to fibrinogen and fibronectin did not correlate with in vivo infectivity, and thus that pathogenic differences between various strains might only be expressed in in vivo conditions, but not in vitro. Therefore, considering the importance of adhesins expression for infection, direct measurement of those adhesins present on the bacterial surface were made by proteomic approach. 5 In the second series of experiments we assessed the physical presence of the LPXTG species at the staphylococcal surface, as measured at various time points during growth in different culture media. S. aureus Newman was grown in either tryptic soy broth (TSB) or in Roswell Park Memorial Institute (RPMI) culture medium, and samples were removed from early exponential growth phase to late stationary phase. Experiments were performed with mutants in the global accessory-gene regulator (agr), surface protein A (Spa) and clumping factor A (ClfA). Peptides of surface proteins were recovered by "trypsin-shaving" of live bacteria, and semi-quantitative proteomic analysis was performed by tandem liquid-chromatography and mass-spectrometry (LC-MS). We also determined in parallel the mRNA expression by microarrays analysis, as well as the phenotypic adherence of the bacteria to fibrinogen in vitro. The surface proteome was highly complex and contained numerous proteins theoretically not belonging to the bacterial envelope, including ribosomal proteins and metabolic enzymes. Sixteen of the 21 known LPXTG species were detected, but were differentially expressed. As expected, 9 known agr-regulated proteins (e.g. including Spa, FnBPA, ClfA, IsdA, IsdB, SasH, SasD, SasG and FmtB) increased up to the late exponential growth phase, and were abrogated in agr-negative mutants. However, only Spa and SasH modified their proteomic and mRNA profiles in parallel in the parent and its agr negative mutant, while all other LPXTG proteins modified their proteomic profiles independently of their mRNA. Moreover, ClfA became highly transcribed and active in in vitro fibrinogen adherence tests during late growth (24h), whereas it remained poorly detected by proteomics. Differential expression was also detected in iron-rich TSB versus iron-poor RPMI. Proteins from the iron-regulated surface determinant (isd) system, including IsdA, IsdB and IsdH were barely expressed in iron-rich TSB, whereas they increased their expression by >10 time in iron-poor RPMI. We conclude that semi-quantitative proteomic analysis of specific protein species is feasible in S. aureus and that proteomic, transcriptomic and adherence phenotypes demonstrated differential profiles in S. aureus. Furthermore, peptide signatures released by trypsin shaving suggested differential protein domain exposures in various environments, which might be relevant for antiadhesins vaccines. A comprehensive understanding of the S. aureus physiology should integrate all these approaches.

Surface swimming behavior of the curculionid Ochetina uniformis Pascoe (Erirhininae, Stenopelmini) and Ludovix fasciatus (Gyllenhal) (Curculioninae, Erodiscini)

The swimming behavior exhibited by specimens of L. fasciatus and O. uniformis was analyzed frame-by-frame with video observation recorded with a digital camera, attached to a stereomicroscope. Adults of O. uniformis, an aquatic insect, swim with all three pairs of legs. During the process of swimming the majority of the abdomen and rostrum remain submerged, part of the fore and hind tibiae remain above the surface, while the mid tibiae remain submerged. The mesothoracic legs, during the power-stroke stage, provide the greatest thrust while the metathoracic legs provide the least forward propulsion. The prothoracic legs, extended forward, help to direct the swimming. The semi-aquatic specie L. fasciatus shows the same swimming style as O. uniformis, that is, with movement of all the three pairs of legs; the mesothoracic legs are responsible for the main propulsion. The insect body remains on the water surface during the process of swimming, while the legs remain submerged. Both species complete a swimming cycle in 0.33 and 0.32 seconds, respectively, with an average speed of 1.38 cm/s and a maximum and minimum swimming duration time of 11.15 and 5.05 minutes, respectively, for L. fasciatus. The swimming behavior exhibited by O. uniformis and L. fasciatus corresponds to the style known as a breast strokelike maneuver. This is the first record of this kind of swimming for both species here observed and increases to seven the number of genera of Curculionidae exhibiting this behavior.

Adaptations of two specialist herbivores to movement on the hairy leaf surface of their host, Solanum guaraniticum Hassl (Solanaceae)

Plant trichomes can difficult the attachment and movement of small insects. Here, we examine the hypothesis that the success on the use of densely haired hosts by two cassidine species is determined by differential morphology and behavior. Larvae of Gratiana graminea (Klug, 1829) and Gratiana conformis (Boheman, 1854) move on the leaf surface of their host, Solanum guaraniticum Hassl by anchoring their tarsungulus on the trichome rays or by inserting the tarsungulus tip directly into epidermis. This kind of movement is only possible due to a similar tarsungulus shape among the species. Tarsungulus growth pattern is also similar between species, being relatively small on the posterior aperture, matching the diameter of the host plant trichome rays. The tarsungulus shape associated with differences on ontogenetic growth and attachment pattern allow these two Cassidinae larvae to efficiently move on the pubescent leaf surface of their host.

Measuring surface potential changes on leaves.

We provide here a detailed protocol for studying the changes in electrical surface potential of leaves. This method has been developed over the years by plant physiologists and is currently used in different variants in many laboratories. The protocol records surface potential changes to measure long-distance electrical signals induced by diverse stimuli such as leaf wounding or current injection. This technique can be used to determine signaling speeds, to measure the connectivity between different plant organs and-by exploiting mutant plants-to identify transporters and ion channels involved in electrical signaling. The approach can be combined with the analysis of mRNA expression and of metabolite concentrations to correlate electrical signaling to specific physiological events. We describe how to use this protocol on Arabidopsis, looking at the effects of leaf wounding; however, it is broadly applicable to other plants and can be used to study other aspects of plant physiology. After wound infliction, surface potential recording takes ∼20 min per plant.