Mecanismos sócio-genéticos da representação social de trabalho docente por grupos de licenciandos de física e de química da Universidade Federal do Rio Grande do Norte

This research aims to understand the social representations Teaching Work in groups of undergraduate students of Physics and Chemistry of the Federal University of Rio Grande do Norte. For this, the proposal was based on the three theoretical and methodological consensus Carvalho (2012) in the explanation of socio-genetic mechanisms constituents of dynamic consensus that has functionality to your organization. It Was used to achieve this goal, the theoretical-epistemological Serge Moscovici (1978, 2003), Jodelet (2011), Wagner (1998,( 2011) and Carvalho (2012). The corpus analyzed results from a qualitative and quantitative research, developed in three stages. The first two (2) questionnaires to fifty (50) of each undergraduate course, a questionnaire and another profile for collection of free associations concerning motes inductors "Give Lesson," "Student" and "Teacher". The second step in the procedure Multiple Classifications, Roazzi (1995), aimed for another thirty (30) undergraduate students for each course, as well as Document Analysis of Educational Projects Curriculum courses in Physics and Chemistry. The data analysis of the first stage focused on descriptive statistics and frequency and average order of the words associated with motes inductors. The results from the Multiple Classification Procedure submitted to multidimensional analysis (MSA multidimensional scalogram analysis) and SSA (Similarity Structure Analysis), were interpreted by the theoretical and methodological proposal of the three consensus, supported by analysis of the rhetorical nature of justifications classifications and categorizations of words, boosted in times of application of Procedure Multiple Classification. The data revealed that the groups surveyed were the same Social Representation with specific dynamic consensual. Thinking Teaching Work for these groups it is considered in three dimensions: the BE-DO-HAVE of teaching. In the group of Physics consensus was clear semantic, which expressed a dynamic in which the interpretations of "Teaching Work" peacefully coexist on perceptions of two concepts: An identity around the "BE" "Teacher" or "BE" "Educator" and the other, how they think about professional development. The type of group consensus Chemistry pointed to a consensual logic hierarchical order in which the gradual between the elements of BE-DO-HAVE attested conflicts and disagreements about the perceptual object "Teaching Work", around what value most, whether they are the attributes of personal or professional-technical dimension of teaching, in the course of professional development. The thesis to explain the mechanisms of socio-genetic Representation Social Teaching Work by theoretical and methodological proposal was confirmed

A dimensão espacial e o proceder pedagógico

This research was conducted at the Post Graduate Program in Education at the Federal University of Rio Grande do Norte. It had the aim to understand the spatial conception associated with the pedagogical action. It promoted a historical-scientific approach to concepts of space to emphasize the spatiality from the geographical and educational theoretical referential. In it empiria situated in a university student universe, has utilized a quantitative measuring instrument as a subsidy to a qualitative dialogical analysis. It showed a synthetic framework arising from the interaction and the reflection focused into problems, challenges and potential of a pedagogical vision that considers the spatiality of teaching education. It seeks to promote delineations of paths pedagogical to a integrate approach of heterotopic space conception, as a necessary critical condition to the appropriation of social reality without doing the epistemological dichotomy, enhancing it signification to the learning academic teaching ambience; as well the scientific and teaching formation in the geography course

A Tessitura de sentidos: representação social de licenciados do curso deletras da UFRN sobre o ensinar

En esta investigación, se busca comprender los procesos de formación de pregrado del Curso de Cartas da UFRN, de estas representaciones sociales acerca de los estudiantes de enseñanza. Por lo tanto, el objetivo fue conocer y analizar las representaciones sociales de curso de pregrado UFRN Cartas sobre la enseñanza. Por lo tanto, se aplica la Técnica de Libre de Palabras Asociación (TALP) con 20 participantes, después de haber sido probados individualmente, utilizando como estímulo palabra "enseñar" y limitar el número de invocaciones a 03 palabras por participante. Esta técnica fue elegida porque es una técnica proyectiva que permite la reducción y racionalización permite acceder al campo semántico de las representaciones sociales, en nuestro caso, en la enseñanza del de pregrado do Curso de Cartas da UFRN. Por lo tanto, llegamos a total de 60 llamadas, análisis de frecuencia después de 41 y 24 después de un análisis del significado que se utilizaron en otro procedimiento aplicado en esta investigación, las calificaciones de Procedimiento de Múltiples Calificaciones (PCM). Estas palabras, sobre la base de las justificaciones de las evocaciones y significados que atribuyen participantes en la investigación, se dividieron en 4 campos semánticos: Campo 1: Aspectos técnicos de la enseñanza, Campo 2: aspectos volitivos, Campo 3: aspectos relacionales de la enseñanza y de Campo 4: Elementos del campo. El PCM se aplicó de forma individual, con 50 estudiantes. Para el análisis de los datos generados, utilizamos Análisis Multidimensional (MDS) para la Escala Multidimensional de Evaluación Análisis gratuito (MSA: Multidimensional Scalogram Analysis) y el análisis de clasificación selectiva de los espacios menores (SSA: Smallest Space Analysis). El mapa generado por el análisis de MSA fue dividido en tres regiones: Aspectos de los aspectos de enseñanza, capacitación y asistencia técnica de los promotores de la profesionalización, la primera región que tiene una sub-regionalización llamada dimensión negativa. El mapa de la SSA análisis se dividió en dos partes y un subfaceta, llamado el aspecto faceta técnica de la enseñanza y la formación, la segunda faceta llamado Vínculo entre el campo y la enseñanza específica y su nombre subfaceta aspecto relacional. Del análisis del contenido de las justificaciones de la PCM, llegó a 5 categorías, a saber: Hacer la enseñanza, la faceta negativa, Escuela, Formación y faceta afectiva del profesor. El TALP aporta pruebas de que algunos de estos estudiantes ve la oportunidad de adquirir unos conocimientos en esta área, la formación en un nivel superior, como quieran, simplemente tienen un título universitario para realizar licitación abierta. El PCM nos ha hecho comprender que el contenido representacional en cuestión se configura desde el universo consensual conectado a la profesión y la formación. Por lo tanto, podemos decir que los titulares de licencias con respecto al tema estudiado anclar la representación social de "enseñar" a la imagen de ser un maestro y objetivar la imagen de la profesión

Nutrição e crescimento do fungo nematófago Arthrobotrys oligospora

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo ergonômico do posto de atividade discente em instituição de ensino superior

This research carried through an ergonomic study of the rank of learning activity of a IES, was applied a questionnaire with ergonomic pointers structuralized in scale to intervalar of semantic differential of 0 the 10, in 290 pupils with ages between 18 and 52 years distributed for 5 courses in 9 classrooms, the sample was of the simple random probabilist type. The used statistical techniques had been the descriptive analysis and the analysis of clusters through statistica software 5,0 considering p £ 0,0500. Involving the following 0 variable: Layout; Colors; Acoustics; Illumination; Temperature; Position; Didactic furniture, and Equipment. The gotten results point to consider that the layout of the rooms, the perception of acoustic comfort, the position of the pupils and the furniture of the searched classrooms had been the condicionantes that had been more distinguished negative how much to the perception of comfort of the user. The the 91,5 NPS varied of 57,9 dB(A) values above of recommended for classrooms in accordance with NBR 10152; NR 15; NR 17; It would carry nº 3214/1978, of the Ministry of the Work and searched literature. The Illumination registered interval of 139 the 966 Lux, values are of the limits of interval recommended for classrooms according to NBR 5413 and NR 17. The thermal temperature registered interval of 24° 25,9ºC; URA 41,6 79.1% and the 0.1 air speed 1,0 m/s, values above of recommended for classrooms according to NBR the 6401 and NR 17. The research still suggests that it would have associations between pains in the body the positions of the pupils and the furniture of the classrooms. The results suggest research especially add for the conditions thermal and acoustics of the classrooms

O masculino em revista: mídia, discurso e modos de subjetivação afetivos-sexuais

This dissertation has the thematic of the sexual affection of the masculine subjectivity within texts of Universo Masculino and Men‟s Health magazines as object of analysis. The central objective was to describe and interpret the theme on the masculine subjectivity in discourses about the affection of sexuality materialized in discourse practices in those magazines. The main point of the research matters how the discourse structures of texts in those magazines make it possible to comprehend the meanings produced about the masculinity nowadays. On the perspective of the thematic trajectory what consists the main aspect that concerns the leading of corpus in the research under the French discourse analysis, we have searched, in reports of those magazines, an arch-genealogy of masculinity, from a specific sexual-affection disposable of our mediate culture. The analytic trajectory enables us to conclude that the thematic trajectory about the sexual affection of the masculine subjectivity produces a semantic way that confirms hegemony and hetero-normative ideals, rather than what proposes new performances on the masculine subjectivity experiences. In its real effects, such mediate discourse practice pursues to link certain sexual affection knowledge to the male individual‟s lifestyle today, from the thematic choices, enunciation modalities and discourse strategies which are specific to the masculine media

Um sistema computacional para diagnosticar viroses de plantas usando a técnica de PCR com construção de primers espécie-específicos

It proposes a established computational solution in the development of a software to construct species-specific primers, used to improve the diagnosis of virus of plant for PCR. Primers are indispensable to PCR reaction, besides providing the specificity of the diagnosis. Primer is a synthetic, short, single stranded piece of DNA, used as a starter in PCR technique. It flanks the sequence desired to amplify. Species-specific primers indicate the well known region of beginning and ending where the polymerase enzyme is going to amplify on a certain species, i.e. it is specific for only a species. Thus, the main objective of this work is to automatize the process of choice of primers, optimizing the specificity of chosen primers by the traditional method

Estudo do efeito do óxido de bário no comportamento de massas para porcelanato

In this work, it is proposed the study of the effect of barium oxide acting as synthetic flow in the behavior of masses for stoneware from the use of raw materials found in the deposits of minerals of the Rio Grande do Norte that it makes use of a great natural potential for the industrialization of the product. The porcelanato is a sophisticated product with excellent final properties being applied as ceramic coating in buildings of high standard of engineering. The raw materials selected for the development of the study had been two types of argilas, two types of feldspatos, dolomita, talco, barium carbonate and silica, being characterized by X-ray fluorescence, X-ray diffraction, granulometric analysis, dilatometric analysis and thermal analysis. Thus, it is intended to define four formulations using the cited raw materials that will be processed, conformed and sintered in the temperatures of 1150 °C, 1175 °C, 1200 °C, 1225 °C e 1250 °C. From the physical characterizations, chemical and morphologic of the formed formulations, the effect of barium oxide is determined in the physical and mechanical properties of the studied system carrying water absorption tests, linear retraction, apparent porosity, apparent specific mass, compacting curve, flexural strength and microstructural analysis by XRD and SEM. After analyzing the results, indicated that barium oxide acts as a flux of high temperature and as the ordering of structure, where the embedded glass phase has the nucleating effect phase potassium silico-aluminum reacting with free silica which together with the high content of potassium concentrated form a new crystalline phase called microcline. The masses studied with the addition of barium oxide present physical-mechanical properties highly satisfactory in reduced firing temperatures, which implies a saving in energy given off in the production and increased productivity

Utilização do éster de soja como biolubrificante

The lubricants found in the market are of mineral or synthetic origin and harm to humans and the environment, mainly due to their improper discard. Therefore industries are seeking to develop products that cause less environmental impact, so to decrease mainly, operator aggression the Cutting Fluids became an emulsion of oil / water or water / oil. However, the emulsion was not considered the most suitable solution for environmental question, therefore the search for biodegradable lubricants and which no are toxic continues and so vegetable oils are seen, again, as a basis for the production of lubricants. The biggest problem with these oils is their oxidative instability that is intensified when working at high temperatures. The process transesterification decreases the oxidation, however changes some physical and chemical properties. Therefore soybean oil after the transesterification process was subjected to tests of density, dynamic viscosity, kinematic viscosity which is calculated from two parameters mentioned, flash point and acidity. Besides the physico-chemical test the soybean oil was subjected to a dynamic test in a tribometer adapted from a table vise, whose induced wear was the adhesive and ultimately was used as cutting fluid in a process of turning in two different materials, steel 1045 and cast iron. This latter test presented results below the mineral cutting fluid which it was compared in all tests, already in other experiments the result was satisfactory and other experiments not, so that chemical additives can be added to the oil analyzed to try equate all parameters and so formulate a biolubrificante not toxic to apply in machining processes of metalworking industry

Fermentação alcoólica utilizando líquido da casca de coco verde como fonte de nutrientes

The liquid of the rind of green coconut (LCCV), an effluent stream from the industrial processing of green coconut rind, is rich in sugars and is a suitable feedstock for fermentation. The first step of this study was to evaluate the potential of natural fermentation of LCCV. As the literature did not provide any information about LCCV and due to the difficulty of working with such an organic effluent, the second step was to characterize the LCCV and to develop a synthetic medium to explore its potential as a bioprocess diluent. The third step was to evaluate the influence of initial condensed and hydrolysable tannins on alcoholic fermentation. The last step of this work was divided into several stages: in particular to evaluate (1) the influence of the inoculum, temperature and agitation on the fermentation process, (2) the carbon source and the use of LCCV as diluent, (3) the differences between natural and synthetic fermentation of LCCV, in order to determine the best process conditions. Characterization of LCCV included analyses of the physico-chemical properties as well as the content of DQO, DBO and series of solids. Fermentation was carried out in bench-scale bioreactors using Saccharomyces cerevisiae as inoculum, at a working volume of 5L and using 0.30% of soy oil as antifoam. During fermentations, the effects of different initial sugars concentrations (10 - 20%), yeast concentrations (5 and 7.5%), temperatures (30 - 50°C) and agitation rates (400 and 500 rpm) on pH/sugars profiles and ethanol production were evaluated. The characterization of LCCV demonstrated the complexity and variability of the liquid. The best conditions for ethanol conversion were (1) media containing 15% of sugar; (2) 7.5% yeast inoculum; (3) temperature set point of 40°C and (4) an agitation rate of 500 rpm, which resulted in an ethanol conversion rate of 98% after 6 hours of process. A statistical comparison of results from natural and synthetic fermentation of LCCV showed that both processes are similar

Efeito da solarização do solo na sobrevivência de Phytophthora capsici em cultivo protegido

Foram realizados três experimentos em Botucatu, estado de São Paulo (22º51'S e 48º26'W), em túnel plástico completamente fechado para verificar a eficiência da solarização do solo na sobrevivência de Phytophthora capsici, agente causal da murchadeira do pimentão (Capsicum annuum). Os experimentos, com duração de 35 dias cada, foram instalados nos períodos de fevereiro a março, abril a maio e junho a julho do ano de 1998. O patógeno, cultivado em grãos de trigo, contidos em bolsas de tecido sintético, foi colocado a 5, 15 e 25 cm de profundidade em duas parcelas idênticas de 33,25 m², sendo uma coberta com plástico de polietileno transparente de 75 mim (solarizada) e a outra sem cobertura (testemunha). Constatou-se que a solarização, aplicada em ambiente protegido, foi eficiente nesses experimentos no controle de P. capsici artificialmente colocada no solo nos três períodos testados, variando apenas o tempo de cobertura do solo de acordo com a época do ano.

Desenvolvimento de um reator fotoquímico aplicável no tratamento de efluentes fenólicos presentes na indústria do petróleo

With water pollution increment at the last years, so many progresses in researches about treatment of contaminated waters have been developed. In wastewaters containing highly toxic organic compounds, which the biological treatment cannot be applied, the Advanced Oxidation Processes (AOP) is an alternative for degradation of nonbiodegradable and toxic organic substances, because theses processes are generation of hydroxyl radical based on, a highly reactivate substance, with ability to degradate practically all classes of organic compounds. In general, the AOP request use of special ultraviolet (UV) lamps into the reactors. These lamps present a high electric power demand, consisting one of the largest problems for the application of these processes in industrial scale. This work involves the development of a new photochemistry reactor composed of 12 low cost black light fluorescent lamps (SYLVANIA, black light, 40 W) as UV radiation source. The studied process was the photo-Fenton system, a combination of ferrous ions, hydrogen peroxide, and UV radiation, it has been employed for the degradation of a synthetic wastewater containing phenol as pollutant model, one of the main pollutants in the petroleum industry. Preliminary experiments were carrier on to estimate operational conditions of the reactor, besides the effects of the intensity of radiation source and lamp distribution into the reactor. Samples were collected during the experiments and analyzed for determining to dissolved organic carbon (DOC) content, using a TOC analyzer Shimadzu 5000A. The High Performance Liquid Chromatography (HPLC) was also used for identification of the cathecol and hydroquinone formed during the degradation process of the phenol. The actinometry indicated 9,06⋅1018 foton⋅s-1 of photons flow, for 12 actived lamps. A factorial experimental design was elaborated which it was possible to evaluate the influence of the reactants concentration (Fe2+ and H2O2) and to determine the most favorable experimental conditions ([Fe2+] = 1,6 mM and [H2O2] = 150,5 mM). It was verified the increase of ferrous ions concentration is favorable to process until reaching a limit when the increase of ferrous ions presents a negative effect. The H2O2 exhibited a positive effect, however, in high concentrations, reaching a maximum ratio degradation. The mathematical modeling of the process was accomplished using the artificial neural network technique

Análise dos Processos de Flotação e Oxidação Avançada para o Tratamento de Efluente Modelo da Indústria do Petróleo

The generation of wastes in most industrial process is inevitable. In the petroleum industry, one of the greatest problems for the environment is the huge amount of produced water generated in the oil fields. This wastewater is a complex mixture and present great amounts. These effluents can be hazardous to the environmental without adequate treatment. This research is focused in the analysis of the efficiencies of the flotation and photo-oxidation processes to remove and decompose the organic compounds present in the produced water. A series of surfactants derivated from the laurilic alcohol was utilized in the flotation to promote the separation. The experiments have been performed with a synthetic wastewater, carefully prepared with xylene. The experimental data obtained using flotation presented a first order kinetic, identified by the quality of the linear data fitting. The best conditions were found at 0.029 g.L-1 for the surfactant EO 7, 0.05 g.L-1 for EO 8, 0.07 g.L-1 for EO 9, 0.045 g.L-1 for EO 10 and 0.08 g.L-1 for EO 23 with the following estimated kinetic constants: 0.1765, 0.1325, 0.1210, 0.1531 and 0.1699 min-1, respectively. For the series studied, the most suitable surfactant was the EO 7 due to the lower reagent onsumption, higher separation rate constant and higher removal efficiency of xylene in the aqueous phase (98%). Similarly to the flotation, the photo-Fenton process shows to be efficient for degradation of xylene and promoting the mineralization of the organic charge around 90% and 100% in 90 min

Síntese e caracterização de tungstatos de cério e estrôncio para fins catalíticos

The main goal of this work was to produce nanosized ceramic materials of the family of the tungstates (tungstates of cerium and strontium), and test them for their catalytic activity in processes involving the transformation of methane (CH4). The methodology used for the synthesis of the ceramic powders involved the complexation combining EDTA-citrate. The materials characterization was performed using simple and differential thermogravimetry, x-ray diffraction, transmission electron microscopy, and energy dispersive spectroscopy (EDS). The microstructure analysis was performed using the refinement by the Rietveld method, and the crystallite size and distribution of the materials was elucidate by the Scherrer and Williamson-Hall methods. The conditions of the synthesis process for the three envisaged materials (SrWO4, SrWO4 using tungsten oxide concentrate as raw material, and Ce2(WO4)3) were adjusted to obtain a single phase crystalline material. The catalytic tests were carried out in the presence of methane and synthetic air, which is composed of 21% O2 and 79% N2. The analysis of the conversion of the reaction was done with the aid of an fourier transform infrared device (FTIR). The analysis showed that, structurally, the SrWO4 produced using raw materials of high and poor purity (99% and 92%, respectively) are similar. The ideal parameters of calcination, in the tested range, are temperature of 1000 °C and time of calcination 5 hours. For the Ce2(WO4)3, the ideal calcination time and are temperature 15 hours and 1000°C, respectively. The Williamson-Hall method provided two different distributions for the crystallite size of each material, whose values ranged between the nanometer and micrometer scales. According to method of Scherrer, all materials produced were composed of nanometric crystallites. The analyses of transmission electron microscopy confirmed the results obtained from the Williamson- Hall method for the crystallite size. The EDS showed an atomic composition for the metals in the SrWO4 that was different of the theoretical composition. With respect to the catalytic tests, all materials were found to be catalytically active, but the reaction process should be further studied and optimized.

Remoção do cobre de efluente galvânico aplicando tensoativos derivado de óleos vegetais

Copper is one of the most used metals in platingprocesses of galvanic industries. The presence of copper, a heavy metal, in galvanic effluents is harmful to the environment.The main objective of this researchwas the removal ofcopperfromgalvanic effluents, using for this purpose anionic surfactants. The removal process is based on the interaction between the polar head group of the anionic surfactant and the divalent copper in solution. The surfactants used in this study were derived from soybean oil (OSS), coconut oil (OCS), and sunflower oil (OGS). It was used a copper synthetic solution (280 ppm Cu+2) simulating the rinse water from a copper acid bath of a galvanic industry. It were developed 23and 32 factorial designs to evaluate the parameters that have influence in theremoval process. For each surfactant (OSS, OCS, and OGS), the independent variables evaluated were: surfactant concentration (1.25 to 3.75 g/L), pH (5 to 9) and the presence of an anionic polymer (0 to 0.0125 g/L).From the results obtained in the 23 factorial design and in the calculus for estimatingthe stoichiometric relationship between surfactants and copper in solution, it were developed new experimental tests, varying surfactant concentration in the range of 1.25 to 6.8 g/L (32 factorial design).The results obtained in the experimental designs were subjected to statistical evaluations to obtain Pareto charts and mathematical modelsfor Copper removal efficiency (%). The statistical evaluation of the 23 and 32factorial designs, using saponifiedcoconut oil (OCS), presented the mathematical model that best described the copper removal process.It can be concluded that OCS was the most efficient anionic surfactant, removing 100% of the copper present in the synthetic galvanic solution