Experimental validation of a proposed single-phase five-level active rectifier operating with model predictive current control

This paper presents a model predictive current control applied to a proposed single-phase five-level active rectifier (FLAR). This current control strategy uses the discrete-time nature of the active rectifier to define its state in each sampling interval. Although the switching frequency is not constant, this current control strategy allows to follow the reference with low total harmonic distortion (THDF). The implementation of the active rectifier that was used to obtain the experimental results is described in detail along the paper, presenting the circuit topology, the principle of operation, the power theory, and the current control strategy. The experimental results confirm the robustness and good performance (with low current THDF and controlled output voltage) of the proposed single-phase FLAR operating with model predictive current control.

Single molecule simulation of diffusion and enzyme kinetics

This work presents a molecular-scale agent-based model for the simulation of enzymatic reactions at experimentally measured concentrations. The model incorporates stochasticity and spatial dependence, using diffusing and reacting particles with physical dimensions. We developed strategies to adjust and validate the enzymatic rates and diffusion coefficients to the information required by the computational agents, i.e., collision efficiency, interaction logic between agents, the time scale associated with interactions (e.g., kinetics), and agent velocity. Also, we tested the impact of molecular location (a source of biological noise) in the speed at which the reactions take place. Simulations were conducted for experimental data on the 2-hydroxymuconate tautomerase (EC 5.3.2.6, UniProt ID Q01468) and the Steroid Delta-isomerase (EC 5.3.3.1, UniProt ID P07445). Obtained results demonstrate that our approach is in accordance to existing experimental data and long-term biophysical and biochemical assumptions.

Prognostic value of technetium-99m-labeled single-photon emission computerized tomography in the follow-up of patients after their first myocardial revascularization surgery

OBJECTIVE: To assess the prognostic value of Technetium-99m-labeled single-photon emission computerized tomography (SPECT) in the follow-up of patients who had undergone their first myocardial revascularization. METHODS: We carried out a retrospective study of 280 revascularized patients undergoing myocardial scintigraphy under stress (exercise or pharmacological stress with dipyridamole) and at rest according to a 2-day protocol. A set of clinical, stress electrocardiographic and scintigraphic variables was assessed. Cardiac events were classified as "major" (death, infarction, unstable angina) and "any" (major event or coronary angioplasty or new myocardial revascularization surgery). RESULTS: Thirty-six major events occurred as follows: 3 deaths, 11 infarctions, and 22 unstable anginas. In regard to any event, 22 angioplasties and 7 new surgeries occurred in addition to major events, resulting a total of 65 events. The sensitivity of scintigraphy in prognosticating a major event or any event was, respectively, 55% and 58%, showing a negative predictive value of 90% and 83%, respectively. Diabetes mellitus, inconclusive stress electrocardiography, and a scintigraphic visualization of left ventricular enlargement were significant variables for the occurrence of a major event. On multivariate analysis, abnormal myocardial scintigraphy was a predictor of any event. CONCLUSION: Myocardial perfusion tomography with Technetium-99m may be used to identify high-risk patients after their first myocardial revascularization surgery.

Comparison of immediate results and follow-up of patients with single-vessel and multivessel coronary artery disease younger than 50 years of age undergoing coronary stent implantation

OBJECTIVE: To assess the in-hospital results and clinical follow-up of young patients (< 50 years) with multivessel coronary artery disease undergoing stent implantation in native coronary arteries and to compare their results with those of patients with single-vessel coronary artery disease. METHODS: We retrospectively studied 462 patients undergoing coronary stent implantation. Patients were divided into 2 groups: group I (G-I) - 388 (84%) patients with single-vessel coronary artery disease; and group II (G-II) - 74 (16%) patients with multivessel coronary artery disease. RESULTS: The mean age of the patients was 45±4.9 years, and the clinical findings at presentation and demographic data were similar in both groups. The rate of clinical success was 95% in G-I and 95.8% in G-II (P=0.96), with no difference in regard to in-hospital evolution between the groups. Death, acute myocardial infarction, and the need for myocardial revascularization during clinical follow-up occurred in 10.1% and 11.2% (P=0.92) in G-I and G-II, respectively. By the end of 24 months, the actuarial analysis showed an event-free survival of 84.6 % in G-I and 81.1% in G-II (P=0.57). CONCLUSION: Percutaneous treatment with coronary stent implantation in young patients with multivessel disease may be safe with a high rate of clinical success, a low incidence of in-hospital complications, and a favorable evolution in clinical follow-up.

Errores en sistemas de procesamiento de datos debido a eventos transitorios en interfaces analógicas: aportes a la mitigación de los mismos. Errors in data processing systems due to single transient events affecting analog interfaces: contributions to their mitigation.

Los eventos transitorios únicos analógicos (ASET, Analog Single Event Transient) se producen debido a la interacción de un ión pesado o un protón de alta energía con un dispositivo sensible de un circuito analógico. La interacción del ión con un transistor bipolar o de efecto de campo MOS induce pares electrón-hueco que provocan picos que pueden propagarse a la salida del componente analógico provocando transitorios que pueden inducir fallas en el nivel sistema. Los problemas más graves debido a este tipo de fenómeno se dan en el medioambiente espacial, muy rico en iones pesados. Casos típicos los constituyen las computadoras de a bordo de satélites y otros artefactos espaciales. Sin embargo, y debido a la continua contracción de dimensiones de los transistores (que trae aparejado un aumento de sensibilidad), este fenómeno ha comenzado a observarse a nivel del mar, provocado fundamentalmente por el impacto de neutrones atmosféricos. Estos efectos pueden provocar severos problemas a los sistemas informáticos con interfaces analógicas desde las que obtienen datos para el procesamiento y se han convertido en uno de los problemas más graves a los que tienen que hacer frente los diseñadores de sistemas de alta escala de integración. Casos típicos son los Sistemas en Chip que incluyen módulos de procesamiento de altas prestaciones como las interfaces analógicas.El proyecto persigue como objetivo general estudiar la susceptibilidad de sistemas informáticos a ASETs en sus secciones analógicas, proponiendo estrategias para la mitigación de los errores.Como objetivos específicos se pretende: -Proponer nuevos modelos de ASETs basados en simulaciones en el nivel dispositivo y resueltas por el método de elementos finitos.-Utilizar los modelos para identificar las secciones más propensas a producir errores y consecuentemente para ser candidatos a la aplicación de técnicas de endurecimiento a radiaciones.-Utilizar estos modelos para estudiar la naturaleza de los errores producidos en sistemas de procesamiento de datos.-Proponer soluciones novedosas para la mitigación de estos efectos en los mismos circuitos analógicos evitando su propagación a las secciones digitales.-Proponer soluciones para la mitigación de los efectos en el nivel sistema.Para llevar a cabo el proyecto se plantea un procedimiento ascendente para las investigaciones a realizar, comenzando por descripciones en el nivel físico para posteriormente aumentar el nivel de abstracción en el que se encuentra modelado el circuito. Se propone el modelado físico de los dispositivos MOS y su resolución mediante el Método de Elementos Finitos. La inyección de cargas en las zonas sensibles de los modelos permitirá determinar los perfiles de los pulsos de corriente que deben inyectarse en el nivel circuito para emular estos efectos. Estos procedimientos se realizarán para los distintos bloques constructivos de las interfaces analógicas, proponiendo estrategias de mitigación de errores en diferentes niveles.Los resultados esperados del presente proyecto incluyen hardware para detección de errores y tolerancia a este tipo de eventos que permitan aumentar la confiabilidad de sistemas de tratamiento de la información, así como también nuevos datos referentes a efectos de la radiación en semiconductores, nuevos modelos de fallas transitorias que permitan una simulación de estos eventos en el nivel circuito y la determinación de zonas sensibles de interfaces analógicas típicas que deben ser endurecidas para radiación.

Potentially viable solar powered appliances cooling and distillation

Stand alone solar powered refrigeration and water desalination, two of the most popular and sought after applications of solar energy systems, have been selected as the topic of research for the works presented in this thesis. The water desalination system based on evaporation and condensation was found to be the most suitable one to be powered by solar energy. It has been established that highoutput fast-response solar heat collectors used to achieve high rates of evaporation and reliable solar powered cooling system for faster rates of condensation are the most important factors in achieving increased outputs in solar powered desalination systems. Comprehensive reviews of Solar powered cooling/refrigeration and also water desalination techniques have been presented. In view of the fact that the Institute of Technology, Sligo has a well-established long history of research and development in the production of state of the art high-efficiency fast-response evacuated solar heat collectors it was decided to use this know how in the work described in this thesis. For this reason achieving high rates of evaporation was not a problem. It was, therefore, the question of the solar powered refrigeration that was envisaged to be used in the solar powered desalination tofacilitate rapid condensation of the evaporated water that had to be addressed first. The principles of various solar powered refrigeration techniques have also been reviewed. The first step in work on solar powered refrigeration was to successfully modify a conventional refrigerator working on Platen-Munters design to be powered by highoutput fast-response evacuated solar heat collectors. In this work, which was the first ever successful attempt in the field, temperatures as low as —19°C were achieved in the icebox. A new approach in the use of photovoltaic technology to power a conventional domestic refrigerator was also attempted. This was done by modifying a conventional domestic refrigerator to be powered by photovoltaic panels in the most efficient way. In the system developed and successfully tested in this approach, the power demand has been reduced phenomenally and it is possible to achieve 48 hours of cooling power with exposure to just 7 hours of sunshine. The successful development of the first ever multi-cycle intermittent solar powered icemaker is without doubt the most exciting breakthrough in the work described in this thesis. Output of 74.3kg of ice per module with total exposure area of 2.88 m2, or 25.73kg per m2, per day is a major improvement in comparison to about 5-6kg of ice per m2 per day reported for all the single cycle intermittent systems. This system has then become the basis for the development of a new solar powered refrigeration system with even higher output, named the “composite” system described in this thesis. Another major breakthrough associated with the works described in this thesis is the successful development and testing of the high-output water desalination system. This system that uses a combination of the high-output fast-response evacuated solar heat collectors and the multi-cycle icemaker. The system is capable of producing a maximum of 141 litres of distilled water per day per module which has an exposure area of 3.24m2, or a production rate of 43.5 litres per m2 per day. Once again when this result is compared to the reported daily output of 5 litres of desalinated water per m per day the significance of this piece of work becomes apparent. In the presentation of many of the components and systems described in this thesis CAD parametric solid modelling has been used instead of photographs to illustrate them more clearly. The multi-cycle icemaker and the high-output desalination systems are the subject of two patent applications.

The Youth Discourses on EU-ropeanization in the New European Countries and the Margins of Europe (Working paper) 

სტატია მომზადდა ევროაკადემიის მეორე გლობალური კონფერენციისთვის „ევროპა შიგნით და გარეთ: მრავალრიცხოვანი დამკვირვებლების თვალით დანახული ევროპა და ევროპელები"

The Western Imaginary and the Imagined Strategies against it in the New European Countries and the Margins of Eastern Europe (Working paper) 

სტატია მომზადდა ევროაკადემიის საერთაშორისო კონფერენციისთვის „აღმოსავლეთ ევროპის ხელახლა გამოგონება"

Approved Drug Products with Theurapeutic Equivalence Evaluation - 34th edition

The publication, Approved Drug Products with Therapeutic Equivalence Evaluations (the List, commonly known as the Orange Book), identifies drug products approved on the basis of safety and effectiveness by the Food and Drug Administration (FDA) under the Federal Food, Drug, and Cosmetic Act (the Act). Drugs on the market approved only on the basis of safety (covered by the ongoing Drug Efficacy Study Implementation [DESI] review [e.g., Donnatal® Tablets and Librax® Capsules] or pre-1938 drugs [e.g., Phenobarbital Tablets]) are not included in this publication. The main criterion for the inclusion of any product is that the product is the subject of an application with an effective approval that has not been withdrawn for safety or efficacy reasons. Inclusion of products on the List is independent of any current regulatory action through administrative or judicial means against a drug product. In addition, the List contains therapeutic equivalence evaluations for approved multisource prescription drug products. These evaluations have been prepared to serve as public information and advice to state health agencies, prescribers, and pharmacists to promote public education in the area of drug product selection and to foster containment of health care costs. Therapeutic equivalence evaluations in this publication are not official FDA actions affecting the legal status of products under the Act.

Synthesis of integrated chemical processes for the production of single enantiomers

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2011

theoretical analysis of single coal particle behavior during spontaneous devolatilization and combustion

Combustion, Coal, Droplet Combustion, Boudouard Reaction