Main ecological gradients and landscape matrix affect wild rabbit Oryctolagus cuniculus (Linnaeus, 1758) (Mammalia: Leporidae) abundance in a coastal region (South-East Spain)

Landscape analysis with transects, in the Marina Baja area (province of Alicante, Spain), has contributed to establish the influence of different landscape matrices and some environmental gradients on wild rabbit Oryctolagus cuniculus (Linnaeus, 1758) (Mammalia: Leporidae) abundance (kilometric abundance index, KAI). Transects (n = 396) were developed to estimate the abundance of this species in the study area from 2006 to 2008.Our analysis shows that rabbits have preferences for a specific land use matrix (irrigated: KAI = 3.47 ± 1.14 rabbits/km). They prefer the coastal area (KAI = 3.82 ± 1.71 rabbits/km), which coincides with thermo-Mediterranean (a bioclimatic belt with a tempered winter and a hot and dry summer with high human density), as opposed to areas in the interior (continental climate with lower human occupation). Their preference for the southern area of the region was also noted (KAI = 8.22 ± 3.90 rabbits/km), which coincides with the upper semi-arid area, as opposed to the northern and intermediate areas (the north of the region coinciding with the upper dry and the intermediate area with the lower dry). On the other hand, we found that the number of rabbits increased during the 3-year study period, with the highest abundance (KAI = 2.71 ± 1.30 rabbits/km) inMay. Thus, this study will enable more precise knowledge of the ecological factors (habitat variables) that intervene in the distribution of wild rabbit populations in a poorly studied area.

Pollen abundance in Late Quaternary sediment cores off West Africa

The pollen record of three marine late Quaternary cores off Senegal shows a juxtaposition of Mediterranean, Northern Saharan, Central Saharan elements, which are considered transported by the trade winds from a winter-rainfall area, and Sahelian, Soudanese, Soudano-Guinean elements, considered transported both by winds and mostly by the Senegal River, and coming from the monsoonal, summer tropical rainfall area of southern West Africa. Littoral vegetation is either the edaphically dry and saline Chenopodiaceae from sebkhas at the time of the main regression, or the warm tropical humid mangrove with Rhizophora during the humid optimum period. Four stratigraphic zones reflect, from basis to top: Zone 4. A semi-arid period with a balanced pollen input. Zone 3. A very arid period with the disappearance of monsoonal pollen, probably from the disappearance of the Senegal River, a very saline littoral plain with Chenopodiaceae, a larger input of northern Saharan pollen from intensified trade winds. Zone 2. A quite humid period, much more so than today, very suddenly established, with a northward extension of the monsoonal areas, a rich littoral mangrove, and weakening of the trade winds. Zone l. A slow and steady evolution toward the present semi-humid conditions with regression of the mangrove, and of the monsoonal areas toward the south. Tentative datations and correlations with the Tchad area suggested: zone 4: 22,500 to 19,000 years BP; zone 3: 19,000 to 12,500 years BP; zone 2: 12,500 to 5,500 years BP; zone 1: 5,500 years BP to top of core. Dinoflagellate cysts display a tropical assemblage with mostly estuarine neritic elements and also a weak oceanic component, mostly in the lower slope core 47. Cosmopolitan taxa dominate the assemblage and only a few species point to more specialized environments. Quantitative variations of the assemblage are the basis of stratigraphy which is not similar to the pollen stratigraphy, and an inshore-outshore gradient has to be taken into account to correlate the three cores.

Evolution of plant water relations research in Australia

Ecophysiological research in Australia has focussed, at different times, on the fundamental similarities in function between all plant species, and on the peculiarity of Australian species with respect to their survival in stressful environments. Early work on plant water relations emphasised the differences between species, and indicated that diverse structural and functional attributes occurred in species from the same water-limited environment. Most recent research has emphasised processes that optimise rates of carbon dioxide exchange, but the understanding of functioning in plants with different morphological arrangements is incomplete. Variation in functions between individual plants and geographic populations in wild species has been examined to a lesser extent. The great variety within and between populations of wild plant species warrants further study for both understanding and more effective management of this biological resource.

The Australo-Papuan bird migration system: Another consequence of Wallace's Line

With respect to its avian migrants, Australo-Papua is a largely self-contained region. Only some 30 species of shorebird and 10 species of land bird migrate from Asia to Australo-Papua to winter. Possible factors precluding migration of Asian birds include long over-water distances and lack of suitable habitats in Australia or New Guinea. Whether evolved within the region or descended from Asian relatives, Australasian species all confine their migratory movements east of Wallace's Line. The most likely factors restricting migration to the region are climate and habitat. The open forests and arid habitats of Australasia are absent from south-east Asia, so there is little, if any, selection promoting extra-regional migration. The arid or semi-arid but otherwise mild climates of much of Australia favour partial migration and widely varying movement patterns and pathways, although with an underlying north to south component. Movements also occur between mainland Australia and New Guinea and Tasmania. The restriction of migration within Australo-Papua and the high variability of migratory pathways have important implications for the ecology and evolution of the Australasian avifauna.

Optimum harvest maturity for guayule seed

Guayule (Parthenium argentatum Gray) is a rubber-producing shrub native to the semi-arid region of north central Mexico and southwestern Texas. Timely harvest is critical to achieve maximum seed viability, vigour, and yield. The objective of this study was to investigate possible indicators of optimum seed maturity in guayule. The optimum harvest maturity time for guayule was studied by comparing quality parameters at different times after flowering. Heat units expressed as growing degree-days after flowering were calculated and related to seed development stages and quality. Seed quality at different stages of development was assessed by germination, capitulum dry mass, 1000 seed mass, and percentage of filled seeds. The maximum seed quality was recorded at 329 growing degree-days (GDD). This was 28 days from time of flowering. At this date, the moisture content of the capitulum was 48% on a wet basis and the colour was comparable to cinnamon (Code 165C) on the Royal Horticultural Society (R.H.S.) standard colour chart. Of all the parameters GDD, 1000 seed mass, and percentage of filled seeds provided a more rapid and reliable measure of optimum seed maturity. Colour identification can be used as an additional indicator. (C) 2005 Elsevier B.V. All rights reserved.

Cutting management of multipurpose tree legumes: effects on green herbage production, leaf retention and water-use-efficiency during the dry season in Timor, Indonesia

Edible herbage production and water-use-efficiency of three tree legumes (Leucaena leucocephala cv. Tarramba, L. pallida x L. leucocephala (KX2) and Gliricidia sepium), cut at different times of the year (February, April, June and uncut) were compared in a semi-arid area of Timor Island, Indonesia. Cutting in the early and mid dry-season (April and June) resulted in higher total leaf production (P< 0.05) and water-use-efficiency (P< 0.05), than cutting late in the wet-season (February) or being left uncut. For the leucaena treatments removing leaf in the early to mid dry-season reduced transpiration, saving soil water for subsequent regrowth as evidenced by the higher relative water contents of leaves from these treatments. This cutting strategy can be applied to local farming conditions to increase the supply of feed for livestock during the dry season.

Lithological mapping of Northwest Argentina with remote sensing data using tonal, textural and contextual features

Tonal, textural and contextual properties are used in manual photointerpretation of remotely sensed data. This study has used these three attributes to produce a lithological map of semi arid northwest Argentina by semi automatic computer classification procedures of remotely sensed data. Three different types of satellite data were investigated, these were LANDSAT MSS, TM and SIR-A imagery. Supervised classification procedures using tonal features only produced poor classification results. LANDSAT MSS produced classification accuracies in the range of 40 to 60%, while accuracies of 50 to 70% were achieved using LANDSAT TM data. The addition of SIR-A data produced increases in the classification accuracy. The increased classification accuracy of TM over the MSS is because of the better discrimination of geological materials afforded by the middle infra red bands of the TM sensor. The maximum likelihood classifier consistently produced classification accuracies 10 to 15% higher than either the minimum distance to means or decision tree classifier, this improved accuracy was obtained at the cost of greatly increased processing time. A new type of classifier the spectral shape classifier, which is computationally as fast as a minimum distance to means classifier is described. However, the results for this classifier were disappointing, being lower in most cases than the minimum distance or decision tree procedures. The classification results using only tonal features were felt to be unacceptably poor, therefore textural attributes were investigated. Texture is an important attribute used by photogeologists to discriminate lithology. In the case of TM data, texture measures were found to increase the classification accuracy by up to 15%. However, in the case of the LANDSAT MSS data the use of texture measures did not provide any significant increase in the accuracy of classification. For TM data, it was found that second order texture, especially the SGLDM based measures, produced highest classification accuracy. Contextual post processing was found to increase classification accuracy and improve the visual appearance of classified output by removing isolated misclassified pixels which tend to clutter classified images. Simple contextual features, such as mode filters were found to out perform more complex features such as gravitational filter or minimal area replacement methods. Generally the larger the size of the filter, the greater the increase in the accuracy. Production rules were used to build a knowledge based system which used tonal and textural features to identify sedimentary lithologies in each of the two test sites. The knowledge based system was able to identify six out of ten lithologies correctly.

A solar powered liquid-desiccant cooling system for greenhouses

Liquid desiccant systems are of potential interest as a means of cooling greenhouses to temperatures below those achieved by conventional means. However, only very little work has been done on this technology with previous workers focussing on the cooling of human dwellings using expensive desiccants such as lithium salts. In this study we are designing a system for greenhouse cooling based on magnesium chloride desiccant which is an abundant and non-toxic substance. Magnesium chloride is found in seawater, for example, and is a by-product from solar salt works. We have carried out a detailed experimental study of the relevant properties of magnesium rich solutions. In addition we have constructed a test rig that includes the main components of the cooling system, namely a dehumidifier and solar regenerator. The dehumidifier is a cross-flow device that consists of a structured packing made of corrugated cellulose paper sheets with different flute angles and embedded cooling tubes. The regenerator is of the open type with insulated backing and fabric covering to spread the flow of desiccant solution. Alongside these experiments we are developing a mathematical model in gPROMS® that combines and simulates the heat and mass transfer processes in these components. The model can be applied to various geographical locations. Here we report predictions for Havana (Cuba) and Manila (Philippines), where we find that average wet-bulb temperatures can be lowered by 2.2 and 3°C, respectively, during the month of May.

A greenhouse integrating desalination, water saving and rainwater harvesting for use in salt-affected inland regions

This study proposes a new type of greenhouse for water re-use and energy saving for agriculture in arid and semi-arid inland regions affected by groundwater salinity. It combines desalination using reverse osmosis (RO), re-use of saline concentrate rejected by RO for cooling, and rainwater harvesting. Experimental work was carried at GBPUAT, Pantnagar, India. Saline concentrate was fed to evaporative cooling pads of greenhouse and found to evaporate at similar rates as conventional freshwater. Two enhancements to the system are described: i) A jet pump, designed and tested to use pressurized reject stream to re-circulate cooling water and thus maintain uniform wetness in cooling pads, was found capable of multiplying flow of cooling water by a factor of 2.5 to 4 while lifting water to a head of 1.55 m; and ii) Use of solar power to drive ventilation fans of greenhouse, for which an electronic circuit has been produced that uses maximum power-point tracking to maximize energy efficiency. Re-use of RO rejected concentrate for cooling saves water (6 l d-1 m-2) of greenhouse floor area and the improved fan could reduce electricity consumption by a factor 8.

Energy saving and solar electricity in fan-ventilated greenhouses

Greenhouse cultivation is an energy intensive process therefore it is worthwhile to introduce energy saving measures and alternative energy sources. Here we show that there is scope for energy saving in fan ventilated greenhouses. Measurements of electricity usage as a function of fan speed have been performed for two models of 1.25 m diameter greenhouse fans and compared to theoretical values. Reducing the speed can cut the energy usage per volume of air moved by more than 70%. To minimize the capital cost of low-speed operation, a cooled greenhouse has been built in which the fan speed responds to sunlight such that full speed is reached only around noon. The energy saving is about 40% compared to constant speed operation. Direct operation of fans from solar-photovoltaic modules is also viable as shown from experiments with a fan driven by a brushless DC motor. On comparing the Net Present Value costs of the different systems over a 10 year amortization period (with and without a carbon tax to represent environmental costs) we find that sunlight-controlled system saves money under all assumptions about taxation and discount rates. The solar-powered system, however, is only profitable for very low discount rates, due to the high initial capital costs. Nonetheless this system could be of interest for its reliability in developing countries where mains electricity is intermittent. We recommend that greenhouse fan manufacturers improve the availability of energy-saving designs such as those described here.

Biomass production in short rotation effluent-irrigated plantations in North-West India

This study estimates above-ground biomass in high density plantations of six important semi-arid tree species at Palwal (70 km from Delhi) irrigated with secondary treated sewage water at the rate of 0, 25, 50 and 100% of daily net evaporation potential (EP). In 2.5 y old plantations (plant spacing, 2 m x 2 m for single stem species and 2 m x 1 m for multi-stem species), Melia azedarach showed fairly high biomass production (38.4 t/ha) followed by Ailanthus excelsa (27.2 t/ha). Order of biomass production (kg / tree) was: Eucalyptus tereticornis (24.1) > A. excelsa (21.8) > M. azedarach (12.6) > Populus deltoides clone G 48 (8.3) > Alstonia scholaris (6.6)> Pongamia pinnata (3.7). Survival of plants after 2.5 y ranged from 25.2% in P. deltoides to 71.7% in P. pinnata, and had a significant effect on biomass production per unit area. ANOVA shows that levels of irrigation (0 - 100%) did not have statistically significant effect on plant growth. Correlation between diameter and biomass was found highly significant (p< 0.01) with R2 nearing to 1.

Desalination of brackish water by a batch reverse osmosis desalink system for use with solar thermal energy

For remote, semi-arid areas, brackish groundwater (BW) desalination powered by solar energy may serve as the most technically and economically viable means to alleviate the water stresses. For such systems, high recovery ratio is desired because of the technical and economical difficulties of concentrate management. It has been demonstrated that the current, conventional solar reverse osmosis (RO) desalination can be improved by 40–200 times by eliminating unnecessary energy losses. In this work, a batch-RO system that can be powered by a thermal Rankine cycle has been developed. By directly recycling high pressure concentrates and by using a linkage connection to provide increasing feed pressures, the batch-RO has been shown to achieve a 70% saving in energy consumption compared to a continuous single-stage RO system. Theoretical investigations on the mass transfer phenomena, including dispersion and concentration polarization, have been carried out to complement and to guide experimental efforts. The performance evaluation of the batch-RO system, named DesaLink, has been based on extensive experimental tests performed upon it. Operating DesaLink using compressed air as power supply under laboratory conditions, a freshwater production of approximately 300 litres per day was recorded with a concentration of around 350 ppm, whilst the feed water had a concentration range of 2500–4500 ppm; the corresponding linkage efficiency was around 40%. In the computational aspect, simulation models have been developed and validated for each of the subsystems of DesaLink, upon which an integrated model has been realised for the whole system. The models, both the subsystem ones and the integrated one, have been demonstrated to predict accurately the system performance under specific operational conditions. A simulation case study has been performed using the developed model. Simulation results indicate that the system can be expected to achieve a water production of 200 m3 per year by using a widely available evacuated tube solar collector having an area of only 2 m2. This freshwater production would satisfy the drinking water needs of 163 habitants in the Rajasthan region, the area for which the case study was performed.