Analyse phytogéographique comparative des savanes et des forêts de Ngotto (République Centrafricaine)

After several investigations on the savanna and forest of Ngotto (Central African Republic), we propose a phytogeographical interpretation of our data on the systematic (level family), the biological forms, the dispersion of diaspores and phytogeographical elements spectra. These spectra are given regarding both formation type (savanna, forest) to appreciate their originality. Then, a comparaison is driven in order to set up the differences between these two formations.

Exploring the benefits of using multi-touch devices in performing information search tasks: An analysis in terms of performance, cognitive load and task engagement

Over the last decade, multi-touch devices (MTD) have spread in a range of contexts. In the learning context, MTD accessibility leads more and more teachers to use them in their classroom, assuming that it will improve the learning activities. Despite a growing interest, only few studies have focused on the impacts of MTD use in terms of performance and suitability in a learning context.However, even if the use of touch-sensitive screens rather than a mouse and keyboard seems to be the easiest and fastest way to realize common learning tasks (as for instance web surfing), we notice that the use of MTD may lead to a less favorable outcome. More precisely, tasks that require users to generate complex and/or less common gestures may increase extrinsic cognitive load and impair performance, especially for intrinsically complex tasks. It is hypothesized that task and gesture complexity will affect users’ cognitive resources and decrease task efficacy and efficiency. Because MTD are supposed to be more appealing, it is assumed that it will also impact cognitive absorption. The present study also takes into account user’s prior knowledge concerning MTD use and gestures by using experience with MTD as a moderator. Sixty university students were asked to perform information search tasks on an online encyclopedia. Tasks were set up so that users had to generate the most commonly used mouse actions (e.g. left/right click, scrolling, zooming, text encoding…). Two conditions were created: MTD use and laptop use (with mouse and keyboard) in order to make a comparison between the two devices. An eye tracking device was used to measure user’s attention and cognitive load. Our study sheds light on some important aspects towards the use of MTD and the added value compared to a laptop in a student learning context.

Maximising heat transfer efficiency in the cold crucible induction melting process

Induction heating is an efficient method used to melt electrically conductive materials, particularly if melting takes place in a ceramic crucible. This form of melting is particularly good for alloys, as electromagnetic forces set up by the induction coil lead to vigorous stirring of the melt ensuring homogeneity and uniformity in temperature. However, for certain reactive alloys, or where high purity is required, ceramic crucibles cannot be used, but a water-cooled segmented copper crucible is employed instead. Water cooling prevents meltdown or distortion of the metal wall, but much of the energy goes into the coolant. To reduce this loss, the electromagnetic force generated by the coil is used to push the melt away from the walls and so minimise contact with water-cooled surfaces. Even then, heat is lost through the crucible base where contact is inevitable. In a collaborative programme between Greenwich and Birmingham Universities, computer modelling has been used in conjunction with experiments to improve the superheat attainable in the melt for a,number of alloys, especially for y-TiAl intermetallics to cast aeroengine turbine blades. The model solves the discretised form of the turbulent Navier-Stokes, thermal energy conservation and Maxwell equations using a Spectral Collocation technique. The time-varying melt envelope is followed explicitly during the computation using an adaptive mesh. This paper briefly describes the mathematical model used to represent the interaction between the magnetic field, fluid flow, heat transfer and change of phase in the crucible and identifies the proportions of energy used in the melt, lost in the crucible base and in the crucible walls. The role of turbulence is highlighted as important in controlling heat losses and turbulence damping is introduced as a means of improving superheat. Model validation is against experimental results and shows good agreement with measured temperatures and energy losses in the cooling fluid throughout the melting cycle.

A blackboard architecture for a hybrid CBR system for scientific software

This paper describes the use of a blackboard architecture for building a hybrid case based reasoning (CBR) system. The Smartfire fire field modelling package has been built using this architecture and includes a CBR component. It allows the integration into the system of qualitative spatial reasoning knowledge from domain experts. The system can be used for the automatic set-up of fire field models. This enables fire safety practitioners who are not expert in modelling techniques to use a fire modelling tool. The paper discusses the integrating powers of the architecture, which is based on a common knowledge representation comprising a metric diagram and place vocabulary and mechanisms for adaptation and conflict resolution built on the Blackboard.

Innovations in learning and teaching approaches using game technologies - can "The Movies" teach how to make a movie?

The use of games technology in education is not a new phenomenon. Even back in the days of 286 processors, PCs were used in some schools along with (what looks like now) primitive simulation software to teach a range of different skills and techniques – from basic programming using Logo (the turtle style car with a pen at the back that could be used to draw on the floor – always a good way of attracting the attention of school kids!) up to quite sophisticated replications of physical problems, such as working out the trajectory of a missile to blow up an enemies’ tank. So why are games not more widely used in education (especially in FE and HE)? Can they help to support learners even at this advanced stage in their education? We aim to provide in this article an overview of the use of game technologies in education (almost as a small literature review for interested parties) and then go more in depth into one particular example we aim to introduce from this coming academic year (Sept. 2006) to help with teaching and assessment of one area of our Multimedia curriculum. Of course, we will not be able to fully provide the reader with data on how successful this is but we will be running a blog (http://themoviesineducation.blogspot.com/) to keep interested parties up to date with the progress of the project and to hopefully help others to set up similar solutions themselves. We will also only consider a small element of the implementation here and cover how the use of such assessment processes could be used in a broader context. The use of a game to aid learning and improve achievement is suggested because traditional methods of engagement are currently failing on some levels. By this it is meant that various parts of the production process we normally cover in our Multimedia degree are becoming difficult to monitor and continually assess.

Family, community and politics: the fertile legacy of Michael Young

The Institute of Community Studies was set up by Michael Young in order to carry out research on politically relevant social issues, in a context free from direct political control. A research method was devised for it whereby researchers made their own values and objectives very explicit, while staying as close as possible in their reports to the concerns and language of respondents themselves. This method has often been criticized by professional sociologists: but it reflects quite well the nature of social knowledge. It has produced reports which help to increase public understanding of social processes, and provide useful guidance to policy makers. Professional sociology on the other hand has tried to develop a rigorously value-free method. As a result, though, it often seems to be tied implicitly to values shared among researchers but not more universally. Arguably this makes it harder for the general public to understand, and accept, its findings.

Exploring strategies for promoting the use of research findings in practice

Following the integration of nurse and midwifery education into institutions of higher education in the United Kingdom, a number of studies have shown that a defined clinical framework for nursing and midwifery lecturers in practice areas is lacking. The aim of this study was to explore strategies that nurse and midwifery lecturers from one higher education institution in south east England can use to work collaboratively with nurses and midwives to promote the utilization of research findings in practice. A cross-sectional survey using a structured questionnaire was sent to a sample of 60 nurse and midwifery lecturers and 90 clinical managers. Response rates of 67% (40) and 69% (62) respectively were obtained. The main strategies suggested were to make clinical staff more aware of what research exist in their specialties; to help them to access research information from research databases; and to critically appraise this information. Other strategies were for teachers to run research workshops on site; to undertake joint research projects with clinical staff; to set up journal clubs or research interest groups; and to help formulate clinical guidelines and protocols which are explicitly research-based.

Industrial water pollution in Dhaka, Bangladesh: strategies and incentives for pollution control in small and medium enterprises

The extent and gravity of the environmental degradation of the water resources in Dhaka due to untreated industrial waste is not fully recognised in international discourse. Pollution levels affect vast numbers, but the poor and the vulnerable are the worst affected. For example, rice productivity, the mainstay of poor farmers, in the Dhaka watershed has declined by 40% over a period of ten years. The study found significant correlations between water pollution and diseases such as jaundice, diarrhoea and skin problems. It was reported that the cost of treatment of one episode of skin disease could be as high as 29% of the weekly earnings of some of the poorest households. The dominant approach to deal with pollution in the SMEs is technocratic. Given the magnitude of the problem this paper argues that to control industrial pollution by SMEs and to enhance their compliance it is necessary to move from the technocratic approach to one which can also address the wider institutional and attitudinal issues. Underlying this shift is the need to adopt the appropriate methodology. The multi-stakeholder analysis enables an understanding of the actors, their influence, their capacity to participate in, or oppose change, and the existing and embedded incentive structures which allow them to pursue interests which are generally detrimental to environmental good. This enabled core and supporting strategies to be developed around three types of actors in industrial pollution, i.e., (i) principal actors, who directly contribute to industrial pollution; (ii) stakeholders who exacerbate the situation; and (iii) potential actors in mitigation. Within a carrot-and-stick framework, the strategies aim to improve environmental governance and transparency, set up a packet to incentive for industry and increase public awareness.

Law in the community: the University of Greenwich/Greenwich Association of Disabled People Centre for Independent Living (GAD) research project

The GAD Advocacy Service is funded by the London Borough of Greenwich Directorate of Neighbourhood Services; its remit to support disabled people experiencing Hate Crime, Domestic Violence and Harassment. Run by disabled personnel and giving advice to all disabled people it is unique in London. Since its inception in 2004, the Advocacy Service has been stretched to its limit - there is a need to extend the remit of the Advocacy Service to give specialist legal advice on other issues. In 2003, the CEDRM-UK project was set up in the University of Greenwich Law Department as part of the Disability Rights Promotion International Legal Education and Research Project; its objectives were firstly, to facilitate the collection of data on the effectiveness of legislation in promoting the rights of disabled persons; and secondly, to pilot new methods in teaching and training in Human Rights Law – students acquire an expertise in Human Rights Law through research into the practical application of legislation relating to civil and human rights in the daily life of the community. In July 2007, GAD and CEDRM-UK embarked on a joint project to report on the work of the Advocacy Service and to create a database to support its caseload. The 2008-9 Project team will report on their work and findings relating to facilitating equality in the workplace; the inclusion of cancer, HIV and multiple sclerosis within the legal definition of disability and the implications of the statutory duty to promote disability equality for the provision of extracurricular activities for schoolchildren. [From the Author]

Local examination of skin diffusion using FTIR spectroscopic imaging and multivariate target factor analysis

In the context of trans-dermal drug delivery it is very important to have mechanistic insight into the barrier function of the skin's stratum corneum and the diffusion mechanisms of topically applied drugs. Currently spectroscopic imaging techniques are evolving which enable a spatial examination of various types of samples in a dynamic way. ATR-FTIR imaging opens up the possibility to monitor spatial diffusion profiles across the stratum corneum of a skin sample. Multivariate data analyses methods based on factor analysis are able to provide insight into the large amount of spectroscopically complex and highly overlapping signals generated. Multivariate target factor analysis was used for spectral resolution and local diffusion profiles with time through stratum corneum. A model drug, 4-cyanophenol in polyethylene glycol 600 and water was studied. Results indicate that the average diffusion profiles between spatially different locations show similar profiles despite the heterogeneous nature of the biological sample and the challenging experimental set-up.

The influence of crank configuration on muscle activity and torque production during arm crank ergometry

This study investigated the effect of crank configuration on muscle activity and torque production during submaximal arm crank ergometry. Thirteen non-specifically trained male participants volunteered. During the research trials they completed a warm-up at 15 W before two 3-min exercise stages were completed at 50 and 100 W; subjects used either a synchronous or asynchronous pattern of cranking. During the final 30-s of each submaximal exercise stage electromyographic and torque production data were collected. After the data had been processed each parameter was analysed using separate 2-way ANOVA tests with repeated measures. The activity of all muscles increased in line with external workload, although a shift in the temporal pattern of muscle activity was noted between crank configurations. Patterns of torque production during asynchronous and synchronous cranking were distinct. Furthermore, peak, minimum and delta (peak-minimum) torque values were different (P < 0.05) between crank configurations at both workloads. For example, at 100 W, peak torque using synchronous [19.6 (4.3) Nm] cranking was higher (P < 0.05) compared to asynchronous [16.8 (1.6) Nm] cranking. In contrast minimum torque was lower (P < 0.05) at 100 W using synchronous [4.8 (1.7) Nm] compared to asynchronous [7.3 (1.2) Nm] cranking. There was a distinct bilateral asymmetry in torque production during asynchronous cranking with the dominant transmitting significantly more force to the crank arm. Taken together, these preliminary data demonstrate the complex nature of muscle activity during arm crank ergometry performed with an asynchronous or synchronous crank set-up. Further work is required to determine how muscle activity (EMG activity) and associated patterns of torque production influence physiological responses and functional capacity during arm crank ergometry.

Exploring strategies for promoting the use of research findings in practice

Following the integration of nurse and midwifery education into institutions of higher education in the United Kingdom, a number of studies have shown that a defined clinical framework for nursing and midwifery lecturers in practice areas is lacking. The aim of this study was to explore strategies that nurse and midwifery lecturers from one higher education institution in south east England can use to work collaboratively with nurses and midwives to promote the utilization of research findings in practice. A cross-sectional survey using a structured questionnaire was sent to a sample of 60 nurse and midwifery lecturers and 90 clinical managers. Response rates of 67% (40) and 69% (62) respectively were obtained. The main strategies suggested were to make clinical staff more aware of what research exist in their specialties; to help them to access research information from research databases; and to critically appraise this information. Other strategies were for teachers to run research workshops on site; to undertake joint research projects with clinical staff; to set up journal clubs or research interest groups; and to help formulate clinical guidelines and protocols which are explicitly research-based.

Globalising knowledge

The technology enablers of Friedman’s Flat World have made enormous differences to knowledge creation and sharing. The disaggregation of supply chains has been followed by the partial disaggregation of knowledge supply chains as some knowledge producers set up innovation centres in various locations around the world. But there is considerable evidence that instead of a flat world distribution of knowledge production there are hubs of innovation and knowledge creation developing in a relatively limited number of locations around the world. This paper discusses this clustering effect and looks at some of the possible explanations. In particular it looks at the human and social aspects of knowledge creation and sharing that resist distance and are starting to be taken into account in the design of technological approaches to knowledge management.

Effects of training peer tutors in content knowledge versus tutoring skills on giving feedback to help tutees’ complex tasks

This study aims to investigate the effectiveness of training tutors in content knowledge of a particular domain versus training them in tutoring skills of pedagogical knowledge when tutoring on a complex tutee task. Forty-seven tutor-tutee pairs of fourth year secondary school students were created and assigned to one of two treatments. Twenty-two tutors received training in content knowledge and the other twenty-five tutors in tutoring skills. Tutors formulated written feedback immediately after the training. Tutees first interpreted the tutor feedback and then used it to revise their research questions. The results showed that tutors trained in tutoring skills formulated more effective feedback than tutors trained in content knowledge. In addition, tutees helped by tutoring-skills tutors found the feedback more motivating than those helped by content- knowledge tutors. However, no differences were found in tutee performance on revision. The findings are discussed in terms of the set-up of this study and implications for improving the effectiveness of peer tutoring.

A Note On Tidal Asymmetry In The Severn Estuary

A one-dimensional, non-linear numerical model is used to investigate the tidally averaged frictional stress and set-up of water level due to tidal asymmetry in the Severn Estuary; these quantities depend on the overtides in the region. A linearized model of the overtides is applied to calculations of the M4 currents in order to delineate the mechanisms responsible for their generation. The relative importance of individual non-linear mechanisms to the tidally averaged stress and set-up is determined; these mechanisms are interactions between tidal flow and changes in depth or breadth over a cross-section, frictional interaction between the tidal flow and Stokes drift, interaction between the tidal fluctuations in water depth and frictional retardation and non-linear advection.