Lixiviação de saflufenacil e residual após períodos de seca

O objetivo deste trabalho foi avaliar a lixiviação de saflufenacil em Latossolo Vermelho-Amarelo (textura média, pH 5,6) e Latossolo Vermelho distrófico (textura argilosa, pH 5,2 e pH 6,0), assim como os efeitos de períodos de seca no residual desse herbicida. A lixiviação de saflufenacil (0,10 g i.a ha-1) e, adicionalmente, a lixiviação de diuron + hexazinone (1.170 + 330 g i.a. ha-1) foram avaliadas sob simulação de chuva (40 mm). O herbicida saflufenacil aplicado em solo argiloso com pH 6,0 apresentou lixiviação até a profundidade de 25 cm, porém ela foi mais pronunciada na faixa de 15 a 20 cm. Quando o herbicida foi aplicado no mesmo solo, mas com pH 5,2, houve lixiviação até a profundidade de 15 cm. Em solo de textura média, a lixiviação foi elevada até a profundidade de 25 cm. Para diuron+hexazinone, no solo argiloso, independentemente do pH, houve lixiviação até 25 cm de profundidade. Todavia, em solo de textura média a lixiviação ocorreu até 40 cm de profundidade. Em relação ao efeito residual do saflufenacil após períodos de seca (0, 15, 30, 45, 60 e 90 dias) em um Latossolo Vermelho distrófico (textura argilosa), foi verificado efeito fitotóxico no bioindicador maior ou igual a 80% até os 28 dias de seca.

Atividade residual de diuron, oxyfluorfen e prometryne no controle de Euphorbia heterophylla

As aplicações de herbicidas em pré-emergência têm por finalidade a obtenção da atividade residual no início do ciclo das culturas. Assim, o objetivo deste trabalho foi avaliar a atividade residual dos herbicidas diuron, oxyfluorfen e prometryne, aplicados isoladamente ou em misturas, no controle de Euphorbia heterophylla. Oito experimentos foram conduzidos em casa de vegetação, aplicando-se doses dos herbicidas ou das misturas aos 30, 20, 10 e 0 dias antes da semeadura da planta daninha (DAS). Com o diuron e prometryne, foram observados controles satisfatórios até 20 DAS nas doses a partir de 1,07 e 1,6 kg ha-1, respectivamente. Quanto ao oxyfluorfen, foi registrado um período residual inferior, obtendo-se controle mínimo de 80% até 10 DAS nas doses a partir de 0,324 kg ha-1. Em relação às misturas dos herbicidas, a mistura diuron+prometryne promoveu controle superior a 85% por períodos de até 30 dias, quando aplicada na menor dose (1+2 kg ha-1), e de 20 dias, quando aplicada na dose de 2+1 kg ha-1. Visando obter esse mesmo patamar de controle por 30 dias, foi necessário 1+0,288 kg ha-1 da mistura diuron+oxyfluorfen. A mistura prometryne+oxyfluorfen apresentou um mínimo de 80% de controle no período de 10 dias, quando utilizada a dose de 1+0,192 kg ha-1.

Seed bank modelling of volunteer oil seed rape: from seeds fate in the soil to seedling emergence

Studies were conducted to estimate parameters and relationships associated with sub-processes in soil seed banks of oilseed rape in Gorgan, Iran. After one month of burial, seed viability decreased to 39%, with a slope of 2.03% per day, and subsequently decreased with a lower slope of 0.01 until 365 days following burial in the soil. Germinability remained at its highest value in autumn and winter and decreased from spring to the last month of summer. Non-dormant seeds of volunteer oilseed rape did not germinate at temperatures lower than 3.8 ºC and a water potential of -1.4 MPa ºd. The hydrothermal values were 36.2 and 42.9 MPa ºd for sub- and supra-optimal temperatures, respectively. Quantification of seed emergence as influenced by burial depth was performed satisfactorily (R² = 0.98 and RMSE = 5.03). The parameters and relationships estimated here can be used for modelling soil seed bank dynamics or establishing a new model for the environment.

On-line determination of residual collector concentration in flotation process

Valuable minerals can be recovered by using froth flotation. This is a widely used separation technique in mineral processing. In a flotation cell hydrophobic particles attach on air bubbles dispersed in the slurry and rise on the top of the cell. Valuable particles are made hydrophobic by adding collector chemicals in the slurry. With the help of a frother reagent a stable froth forms on the top of the cell and the froth with valuable minerals, i.e. the concentrate, can be removed for further processing. Normally the collector is dosed on the basis of the feed rate of the flotation circuit and the head grade of the valuable metal. However, also the mineral composition of the ore affects the consumption of the collector, i.e. how much is adsorbed on the mineral surfaces. Therefore it is worth monitoring the residual collector concentration in the flotation tailings. Excess usage of collector causes unnecessary costs and may even disturb the process. In the literature part of the Master’s thesis the basics of flotation process and collector chemicals are introduced. Capillary electrophoresis (CE), an analytical technique suitable for detecting collector chemicals, is also reviewed. In the experimental part of the thesis the development of an on-line CE method for monitoring the concentration of collector chemicals in a flotation process and the results of a measurement campaign are presented. It was possible to determine the quality and quantity of collector chemicals in nickel flotation tailings at a concentrator plant with the developed on-line CE method. Sodium ethyl xanthate and sodium isopropyl xanthate residuals were found in the tailings and slight correlation between the measured concentrations and the dosage amounts could be seen.

Residual herbicides in weed management for glyphosate-resistant soybean in Brazil

In agricultural production systems where the glyphosate-resistant soybean crop (Glycine max) is grown and the practice of crop rotation with alternative herbicides is not adopted, the exclusive and continuous use of glyphosate has led to the occurrence of resistant weed populations that may limit or compromise the benefits of this technology. Thus, the efficacy of weed management programs, including the use of residual herbicides (sulfentrazone, flumioxazin, imazethapyr, diclosulan, chlorimuron and s-metolachlor) applied in preemergence and followed by in-crop postemergence applications of glyphosate (PRE-POST) were compared to glyphosate postemergence only programs - POST. The study was conducted across nine locations during the 2009/2010 and 2010/2011 growing seasons. PRE-POST programs were efficient in the control of Amaranthus viridis, Brachiaria plantaginea, Bidens pilosa, Commelina benghalensis, Eleusine indica, Euphorbia heterophylla and Raphanus raphanistrum, with the level of control being similar when comparing the program with two applications of glyphosate POST. Some PRE-POST programs were not efficient in controlling Cenchrus echinatus, Ipomoea hederifolia and Ipomoea triloba. Sulfentrazone and diclosulam PRE-POST programs improved the control of Ipomoea triloba compared to sequential applications of glyphosate alone. No significant differences in soybean yield were observed between any of the herbicide treatments or study locations. The use of residual herbicides in preemergence followed by glyphosate in-crop postemergence provides consistent weed control and reducing early season weed competition. Furthermore, these programs utilize at least two herbicide modes of action for herbicide use diversity, which will be needed to stay ahead of resistance build-up, regardless of when weeds may appear.

Eficiência e residual no solo de herbicidas na cultura do feijão

Avaliou-se a eficiência de herbicidas na cultura do feijão e a possível ação residual desses produtos sobre as culturas de sorgo e de milho cultivadas em sucessão. O experimento foi realizado em campo e em casa de vegetação, avaliando-se os seguintes tratamentos: fomesafen (250 g L-1) e a mistura comercial de bentazon e imazamox (600 g L‑1 + 28 g L-1) nas doses de 25, 50, 75 e 100% da dose recomendada dos respectivos produtos comerciais, bem como a mistura em tanque desses herbicidas nas proporções de 75 + 25, 50 + 50 e 25 + 0,75%, além de duas testemunhas: uma capinada e outra sem capina. O fomesafen na dose de 250 g ha-1 proporcionou boa produtividade de feijão, porém prejudicou o crescimento de plantas de sorgo nas amostras de solo coletadas até 183 dias após a aplicação (DAA), indicando grande persistência do herbicida. No solo coletado aos 153 DAA, observou-se intoxicação nas plantas de milho, mas não houve influência no acúmulo de matéria seca da parte aérea nem na produção de grãos. A mistura pronta de bentazon e imazamox não foi eficiente no controle de plantas daninhas até a colheita do feijão. Contudo, quando a essa mistura adicionou-se o fomesafen, houve redução da dose do fomesafen em 75%, com ótimo controle de plantas daninhas e fácil condição de colheita do feijão, além de menor risco de carryover em plantas de sorgo e de milho. A persistência do fomesafen no solo não foi alterada com a mistura em tanque de bentazon e imazamox.

Carrier selection and management : A case study on Neste Oil Retail

Service provider selection has been said to be a critical factor in the formation of supply chains. Through successful selection companies can attain competitive advantage, cost savings and more flexible operations. Service provider management is the next crucial step in outsourcing process after the selection has been made. Without proper management companies cannot be sure about the level of service they have bought and they may suffer from service provider's opportunistic behavior. In worst case scenario the buyer company may end up in locked-in situation in which it is totally dependent of the service provider. This thesis studies how the case company conducts its carrier selection process along with the criteria related to it. A model for the final selection is also provided. In addition, case company's carrier management procedures are reflected against recommendations from previous researches. The research was conducted as a qualitative case study on the principal company, Neste Oil Retail. A literature review was made on outsourcing, service provider selection and service provider management. On the basis of the literature review, this thesis ended up recommending Analytic hierarchy process as the preferred model for the carrier selection. Furthermore, Agency theory was seen to be a functional framework for carrier management in this study. Empirical part of this thesis was conducted in the case company by interviewing the key persons in the selection process, making observations and going through documentations related to the subject. According to the results from the study, both carrier selection process as well as carrier management were closely in line with suggestions from literature review. Analytic hierarchy process results revealed that the case company considers service quality as the most important criteria with financial situation and price of service following behind with almost identical weights with each other. Equipment and personnel was seen as the least important selection criterion. Regarding carrier management, the study resulted in the conclusion that the company should consider engaging more in carrier development and working towards beneficial and effective relationships. Otherwise, no major changes were recommended for the case company processes.

Membrane development for oil contaminated water treatments

The aim of this Master’s thesis study was to develop a membrane for oil contaminated water treatments. Oily wastewaters are a big problem to environment and therefore it is important to find an efficient method for their treatment. There are several treatment methods, but one of the most promising methods is membrane filtration. In the theoretical part of this study the membrane technology and polymeric membrane preparation with phase inversion and membrane modification methods was discussed. It was also told about the most important properties of the membranes. Oily waters, their treatment methods and oily wastewater sources were discussed more specifically. In the experimental part membranes from cellulose acetate were prepared and membranes were modified with two different methods. Modification methods were surface modification and polymer mixing. The modification purpose was to make membranes more hydrophilic and increase surface charge, which can reduce fouling. Membranes were characterized by determining zeta potential, contact angle, oil retention, pure water permeability, pressure-normalized flux and fouling. It were used both synthetic and real spent oil-water emulsion in membrane filtration. Surface modification resulted membranes, which had better properties than unmodified membrane. The amount of substance used in surface modification affected a lot to membrane properties, so it would be necessary to try different amounts of substance to develop the best membrane for oil-water emulsion treatment.

Oil glands in the Neotropical genus Dahlstedtia Malme (Leguminosae, Papilionoideae, Millettieae)

Dahlstedtia pentaphylla (Taub.) Burkart and D. pinnata (Benth.) Malme belong to the Millettieae tribe and are tropical leguminous trees that produce a strong and unpleasant odour. In the present work, we investigated the distribution, development and histochemistry of foliar and floral secretory cavities that could potentially be related to this odour. The ultrastructure of foliar secretory cavities were also studied and compared with histochemical data. These data were compared with observations recorded for other species of Millettieae in order to gain a phylogenetic and taxonomic perspective. Foliar secretory cavities were only recorded for D. pentaphylla. Floral secretory cavities were present in the calyx, wings and keels in both species; in D. pinnata they also were found in bracteoles and vexillum. Such structures were found to originate through a schizogenous process. Epithelial cells revealed a large amount of flattened smooth endoplasmic reticula, well-developed dictyosomes and vacuoles containing myelin-like structures. Cavity lumen secretion stains strongly for lipids. Features of the secretory cavities studied through ultrastructural and histochemical procedures identify these structures as oil glands. Thus, if the odour produced by such plants has any connection with the accumulation of rotenone, as other species belonging to the "timbó" complex, the lipophilic contents of the secretory cavities of Dahlstedtia species take no part in such odour production. The presence, distribution patterns and frequencies of secretory structures in Dahlstedtia are taxonomically significant and may be utilized as a diagnostic character which justifies the separation of this genus into two species.

Residual ß-cell function and microvascular complications in type 1 diabetic patients

To determine the influence of residual ß-cell function on retinopathy and microalbuminuria we measured basal C-peptide in 50 type 1 diabetic outpatients aged 24.96 ± 7.14 years, with a duration of diabetes of 9.1 ± 6.2 years. Forty-three patients (86%) with low C-peptide (<0.74 ng/ml) had longer duration of diabetes than 7 patients (14%) with high C-peptide (³0.74 ng/ml) (9 (2-34) vs 3 (1-10) years, P = 0.01) and a tendency to high glycated hemoglobin (HBA1) (8.8 (6-17.9) vs 7.7 (6.9-8.7)%, P = 0.08). Nine patients (18%) had microalbuminuria (two out of three overnight urine samples with an albumin excretion rate (AER) ³20 and <200 µg/min) and 13 (26%) had background retinopathy. No association was found between low C-peptide, microalbuminuria and retinopathy and no difference in basal C-peptide was observed between microalbuminuric and normoalbuminuric patients (0.4 ± 0.5 vs 0.19 ± 0.22 ng/ml, P = 0.61) and between patients with or without retinopathy (0.4 ± 0.6 vs 0.2 ± 0.3 ng/ml, P = 0.43). Multiple regression analysis showed that duration of diabetes (r = 0.30, r2 = 0.09, P = 0.031) followed by HBA1 (r = 0.41, r2 = 0.17, P = 0.01) influenced basal C-peptide, and this duration of diabetes was the only variable affecting AER (r = 0.40, r2 = 0.16, P = 0.004). In our sample of type 1 diabetic patients residual ß-cell function was not associated with microalbuminuria or retinopathy.

Antinociceptive effects of the essential oil of Croton zehntneri in mice

Croton zehntneri is an aromatic plant native to Northeastern Brazil, where it is often used in folk medicine. In the present study the antinociceptive effects of the essential oil of Croton zehntneri (EOCz) were evaluated in mice. EOCz administered orally at doses of 100 and 300 mg/kg reduced paw licking time in the second phase of the formalin test from the control value of 41.61 ± 8.62 to 12.01 ± 7.97 and 6.57 ± 3.42 s, respectively. During the first phase of the formalin test only 300 mg/kg induced a significant alteration (from 58.2 ± 7.02, control, to 28.7 ± 4.73 s). The number of contortions in response to intraperitoneal injections of acetic acid did not differ significantly between controls (80.6 ± 9.01) and experimental (300 mg/kg body weight) animals (89.1 ± 9.53% of the control numbers; P > or = 0.05, Student t-test). In the hot-plate test, EOCz at doses > or = 100 mg/kg significantly increased the latency time with respect to controls (11.2 ± 0.80). At 100 and 300 mg/kg this increase persisted for 180 and 240 min, respectively. The data show that EOCz is effective as an antinociceptive agent.

Antinociceptive effects of the essential oil of Croton nepetaefolius on mice

Croton nepetaefolius Baill., is an aromatic plant native to the northeast of Brazil where it is extensively used in folk medicine as a sedative, orexigen and antispasmodic agent. In the present study the antinociceptive effects of the essential oil of C. nepetaefolius (EOCn), administered orally, were evaluated in male Swiss mice (20-25 g). In the acetic acid-induced writhing test, EOCn (100 and 300 mg/kg; N = 14 and N = 12, respectively) was effective at the highest dose. In the hot-plate test, EOCn at 30 and 300 mg/kg, but not at 3 mg/kg, significantly increased the latency at all observation times up to the 180th min (N = 12 for each dose). In the formalin test, EOCn significantly reduced paw licking in the second phase of the test at 100 mg/kg (N = 12), but decreased it in both phases at 300 mg/kg (N = 12). At 30 mg/kg, the effect of EOCn did not differ from control values in either phase of the formalin test (N = 6). Pretreatment with naloxone (5 mg/kg, ip) significantly reversed the analgesic effect of morphine (5 mg/kg, sc) on both phases, but not that of EOCn at 300 mg/kg (N = 6) on both phases of the formalin test. The data show that orally administered EOCn promotes a dose-dependent antinociceptive effect whose mechanisms remain to be elucidated.

Antinociceptive properties of the essential oil of Ocimum gratissimum L. (Labiatae) in mice

We have investigated the antinociceptive effects of the essential oil of Ocimum gratissimum L. (Labiatae) (EOOG) in two classical models of pain in male Swiss mice (25-35 g), the writhing test and the formalin test. At doses of 30, 100 and 300 mg/kg (po), EOOG produced a dose-dependent inhibition (from 58.3 ± 4.4 to 40.7 ± 6.3, 36.4 ± 3.6 and 24.6 ± 3.6, respectively; N = 8-10, P<0.05) of acetic acid-induced writhing, causing up to a ~60% inhibition at the highest dose used, comparable to that obtained with indomethacin (10 mg/kg, po). At the same doses, EOOG predominantly inhibited the late (inflammatory) phase of the formalin-induced pain response (from 59.3 ± 8.3 to 40.4 ± 4.8, 23.2 ± 2.8 and 25.3 ± 5.5, respectively; N = 6, P<0.05), with a maximal reduction of ~60% of the control, although a significant reduction of the initial (neurogenic) phase was also observed at 300 mg/kg (from 62.5 ± 6.07 to 37 ± 5.9; P<0.05). On the basis of these data, we conclude that EOOG possesses interesting antinociceptive properties in the writhing and formalin tests. Due to the relatively low toxicity of EOOG, further detailed examination is strongly indicated for a better characterization of its pharmacological properties and its potential therapeutic value.

Silicon-containing species in used lube oil re-refining

Nowadays, the re-refining of the used lube oils has gained worldwide a lot of attention due to the necessity for added environmental protection and increasingly stringent environmental legislation. One of the parameters determining the quality of the produced base oils is the composition of feedstock. Estimation of the chemical composition of the used oil collected from several European locations showed that the hydrocarbon structure of the motor oil is changed insignificantly during its operation and the major part of the changes is accounted for with depleted oil additives. In the lube oil re-refining industry silicon, coming mainly from antifoaming agents, is recognized to be a contaminant generating undesired solid deposits in various locations in the re-refining units. In this thesis, a particular attention was paid to the mechanism of solid product formation during the alkali treatment process of silicon-containing used lube oils. The transformations of a model siloxane, tetramethyldisiloxane (TMDS), were studied in a batch reactor at industrially relevant alkali treatment conditions (low temperature, short reaction time) using different alkali agents. The reaction mechanism involving solid alkali metal silanolates was proposed. The experimental data obtained demonstrated that the solids were dominant products at low temperature and short reaction time. The liquid products in the low temperature reactions were represented mainly by linear siloxanes. The prolongation of reaction time resulted in reduction of solids, whereas both temperature and time increase led to dominance of cyclic products in the reaction mixture. Experiments with the varied reaction time demonstrated that the concentration of cyclic trimer being the dominant in the beginning of the reaction diminished with time, whereas the cyclic tetramer tended to increase. Experiments with lower sodium hydroxide concentration showed the same effect. In addition, a decrease of alkali agent concentration in the initial reaction mixture accelerated TMDS transformation reactions resulting in solely liquid cyclic siloxanes yields. Comparison of sodium and potassium hydroxides applied as an alkali agent demonstrated that potassium hydroxide was more efficient, since the activation energy in KOH presence was almost 2-fold lower than that for sodium hydroxide containing reaction mixture. Application of potassium hydroxide for TMDS transformation at 100° C with 3 hours reaction time resulted in 20 % decrease of solid yields compared to NaOH-containing mixture. Moreover, TMDS transformations in the presence of sodium silanolate applied as an alkali agent led to formation of only liquid products without formation of the undesired solids. On the basis of experimental data and the proposed reaction mechanism, a kinetic model was developed, which provided a satisfactory description of the experimental results. Suitability of the selected siloxane as a relevant model of industrial silicon-containing compounds was verified by investigation of the commercially available antifoam agent in base-catalyzed conditions.

Regime-Switching in the Impact of Oil Price Shocks on Stock Market Volatility: Evidence from Oil-Importing and Oil-Exporting Countries

Research has highlighted the adequacy of Markov regime-switching model to address dynamic behavior in long term stock market movements. Employing a purposed Extended regime-switching GARCH(1,1) model, this thesis further investigates the regime dependent nonlinear relationship between changes in oil price and stock market volatility in Saudi Arabia, Norway and Singapore for the period of 2001-2014. Market selection is prioritized to national dependency on oil export or import, which also rationalizes the fitness of implied bivariate volatility model. Among two regimes identified by the mean model, high stock market return-low volatility regime reflects the stable economic growth periods. The other regime characterized by low stock market return-high volatility coincides with episodes of recession and downturn. Moreover, results of volatility model provide the evidence that shocks in stock markets are less persistent during the high volatility regime. While accelerated oil price rises the stock market volatility during recessions, it reduces the stock market risk during normal growth periods in Singapore. In contrast, oil price showed no significant notable impact on stock market volatility of target oil-exporting countries in either of the volatility regime. In light to these results, international investors and policy makers could benefit the risk management in relation to oil price fluctuation.