Voter behaviour and constitutional change in Australia since 1967

Australian Constitutional referendums have been part of the Australian political system since federation. Up to the year 1999 (the time of the last referendum in Australia), constitutional change in Australia does not have a good history of acceptance. Since 1901, there have been 44 proposed constitutional changes with eight gaining the required acceptance according to section 128 of the Australian Constitution. In the modern era since 1967, there have been 20 proposals over seven referendum votes for a total of four changes. Over this same period, there have been 13 federal general elections which have realised change in government just five times. This research examines the electoral behaviour of Australian voters from 1967 to 1999 for each referendum. Party identification has long been a key indicator in general election voting. This research considers whether the dominant theory of voter behaviour in general elections (the Michigan Model) provides a plausible explanation for voting in Australian referendums. In order to explain electoral behaviour in each referendum, this research has utilised available data from the Australian Electoral Commission, the 1996 Australian Bureau of Statistics Census data, and the 1999 Australian Constitutional Referendum Study. This data has provided the necessary variables required to measure the impact of the Michigan Model of voter behaviour. Measurements have been conducted using bivariate and multivariate analyses. Each referendum provides an overview of the events at the time of the referendum as well as the =yes‘ and =no‘ cases at the time each referendum was initiated. Results from this research provide support for the Michigan Model of voter behaviour in Australian referendum voting. This research concludes that party identification, as a key variable of the Michigan Model, shows that voters continue to take their cues for voting from the political party they identify with in Australian referendums. However, the outcome of Australian referendums clearly shows that partisanship is only one of a number of contributory factors in constitutional referendums.

Mitigating Democracy and 'A Question on Reason'

This book details the early political philosophy of Jean-Paul Gagnon. It deals with the ideas of democracy as something endemic to human nature; with practical methods for the improvement of democracy; and a mix of other political concepts. The book also has a response to the Russian Federation's development of the 'mother of all bombs' which leads Gagnon to question reason itself in humanity's progress.

Reading the environment : narrative constructions of ecological subjectivities in Australian children's literature

Ways in which humans engage with the environment have always provided a rich source of material for writers and illustrators of Australian children's literature. Currently, readers are confronted with a multiplicity of complex, competing and/or complementing networks of ideas, theories and emotions that provide narratives about human engagement with the environment at a particular historical moment. This study, entitled Reading the Environment: Narrative Constructions of Ecological Subjectivities in Australian Children's Literature, examines how a representative sample of Australian texts (19 picture books and 4 novels for children and young adults published between 1995 and 2006) constructs fictional ecological subjects in the texts, and offers readers ecological subject positions inscribed with contemporary environmental ideologies. The conceptual framework developed in this study identifies three ideologically grounded positions that humans may assume when engaging with the environment. None of these positions clearly exists independently of any other, nor are they internally homogeneous. Nevertheless they can be categorised as: (i) human dominion over the environment with little regard for environmental degradation (unrestrained anthropocentrism); (ii) human consideration for the environment driven by understandings that humans need the environment to survive (restrained anthropocentrism); and (iii) human deference towards the environment guided by understandings that humans are no more important than the environment (ecocentrism). iv The transdisciplinary methodological approach to textual analysis used in this thesis draws on ecocriticism, narrative theories, visual semiotics, ecofeminism and postcolonialism to discuss the difficulties and contradictions in the construction of the positions offered. Each chapter of textual analysis focuses on the construction of subjectivities in relation to one of the positions identified in the conceptual framework. Chapter 5 is concerned with how texts highlight the negative consequences of human dominion over the environment, or, in the words of this study, living with ecocatastrophe. Chapter 6 examines representations of restrained anthropocentrism in its contemporary form, that is, sustainability. Chapter 7 examines representations of ecocentrism, a radical position with inherent difficulties of representation. According to the analysis undertaken, the focus texts convey the subtleties and complexities of human engagement with the environment and advocate ways of viewing and responding to contemporary unease about the environment. The study concludes that these ways of viewing and responding conform to and/or challenge dominant socio-cultural and political-economic opinions regarding the environment. This study, the first extended work of its kind, makes an original contribution to ecocritical study of Australian children's literature. By undertaking a comprehensive analysis of how texts for children represent human engagement with the environment at a time when important environmental concerns pose significant threats to human existence, I hope to contribute new knowledge to an area of children's literature research that to date has been significantly under-represented.

A constraints-led perspective to understanding skill acquisition and game play: A basis for integration of motor learning theory and physical education praxis?

Background: In order to design appropriate environments for performance and learning of movement skills, physical educators need a sound theoretical model of the learner and of processes of learning. In physical education, this type of modelling informs the organization of learning environments and effective and efficient use of practice time. An emerging theoretical framework in motor learning, relevant to physical education, advocates a constraints-led perspective for acquisition of movement skills and game play knowledge. This framework shows how physical educators could use task, performer and environmental constraints to channel acquisition of movement skills and decision making behaviours in learners. From this viewpoint, learners generate specific movement solutions to satisfy the unique combination of constraints imposed on them, a process which can be harnessed during physical education lessons. Purpose: In this paper the aim is to provide an overview of the motor learning approach emanating from the constraints-led perspective, and examine how it can substantiate a platform for a new pedagogical framework in physical education: nonlinear pedagogy. We aim to demonstrate that it is only through theoretically valid and objective empirical work of an applied nature that a conceptually sound nonlinear pedagogy model can continue to evolve and support research in physical education. We present some important implications for designing practices in games lessons, showing how a constraints-led perspective on motor learning could assist physical educators in understanding how to structure learning experiences for learners at different stages, with specific focus on understanding the design of games teaching programmes in physical education, using exemplars from Rugby Union and Cricket. Findings: Research evidence from recent studies examining movement models demonstrates that physical education teachers need a strong understanding of sport performance so that task constraints can be manipulated so that information-movement couplings are maintained in a learning environment that is representative of real performance situations. Physical educators should also understand that movement variability may not necessarily be detrimental to learning and could be an important phenomenon prior to the acquisition of a stable and functional movement pattern. We highlight how the nonlinear pedagogical approach is student-centred and empowers individuals to become active learners via a more hands-off approach to learning. Summary: A constraints-based perspective has the potential to provide physical educators with a framework for understanding how performer, task and environmental constraints shape each individual‟s physical education. Understanding the underlying neurobiological processes present in a constraints-led perspective to skill acquisition and game play can raise awareness of physical educators that teaching is a dynamic 'art' interwoven with the 'science' of motor learning theories.

Vision-based topological mapping and localisation

Competent navigation in an environment is a major requirement for an autonomous mobile robot to accomplish its mission. Nowadays, many successful systems for navigating a mobile robot use an internal map which represents the environment in a detailed geometric manner. However, building, maintaining and using such environment maps for navigation is difficult because of perceptual aliasing and measurement noise. Moreover, geometric maps require the processing of huge amounts of data which is computationally expensive. This thesis addresses the problem of vision-based topological mapping and localisation for mobile robot navigation. Topological maps are concise and graphical representations of environments that are scalable and amenable to symbolic manipulation. Thus, they are well-suited for basic robot navigation applications, and also provide a representational basis for the procedural and semantic information needed for higher-level robotic tasks. In order to make vision-based topological navigation suitable for inexpensive mobile robots for the mass market we propose to characterise key places of the environment based on their visual appearance through colour histograms. The approach for representing places using visual appearance is based on the fact that colour histograms change slowly as the field of vision sweeps the scene when a robot moves through an environment. Hence, a place represents a region of the environment rather than a single position. We demonstrate in experiments using an indoor data set, that a topological map in which places are characterised using visual appearance augmented with metric clues provides sufficient information to perform continuous metric localisation which is robust to the kidnapped robot problem. Many topological mapping methods build a topological map by clustering visual observations to places. However, due to perceptual aliasing observations from different places may be mapped to the same place representative in the topological map. A main contribution of this thesis is a novel approach for dealing with the perceptual aliasing problem in topological mapping. We propose to incorporate neighbourhood relations for disambiguating places which otherwise are indistinguishable. We present a constraint based stochastic local search method which integrates the approach for place disambiguation in order to induce a topological map. Experiments show that the proposed method is capable of mapping environments with a high degree of perceptual aliasing, and that a small map is found quickly. Moreover, the method of using neighbourhood information for place disambiguation is integrated into a framework for topological off-line simultaneous localisation and mapping which does not require an initial categorisation of visual observations. Experiments on an indoor data set demonstrate the suitability of our method to reliably localise the robot while building a topological map.

Impact and energy absorption of empty and foam-filled conical tubes

Foam-filled conical tubes have recently emerged as efficient energy absorbing devices to mitigate the adverse effects of impacts. The primary aim of this thesis was to generate research and design information on the impact and energy absorption response of empty and foam-filled conical tubes, and to facilitate their application in energy absorbing systems under axial and oblique loading conditions representative of those typically encountered in crashworthiness and impact applications. Finite element techniques supported by experiments and existing results were used in the investigation. Major findings show that the energy absorption response can be effectively controlled by varying geometry and material parameters. A useful empirical formula was developed for providing engineering designers with an initial estimate of the load ratio and hence energy absorption performances of these devices. It was evident that foam-filled conical tubes enhance the energy absorption capacity and stabilise the crush response for both axial and oblique impact loading without a significant increase in the initial peak load. This is practically beneficial when higher kinetic energy needs to be absorbed, thus reducing the impact force transmitted to the protected structure and occupants. Such tubes also increase and maintain the energy absorption capacity under global bending as well as minimise the reduction of energy absorption capacity with increasing load angle. Furthermore, the results also highlight the feasibility of adding a foam-filled conical tube as a supplementary device in energy absorbing systems, since the overall energy absorption performance of such systems can be favourably enhanced by only including a relatively small energy absorbing device. Above all, the results demonstrate the superior performance of foam-filled conical tube for mitigating impact energy in impact and crashworthiness applications.

Experimental tests on structural members fabricated from high strength steel materials

Typical high strength steels (HSS) have exceptional high strengths with improved weldability making the material attractive in modern steel constructions. However, due to lack of understanding, most of the current steel design standards are limited to conventional low strength steels (LSS, i.e. fy ≤ 450 MPa). This paper presents the details of full-scale experimental tests on short beams fabricated from BISPLATE80 HSS materials (nominal fy = 690 MPa). The various slenderness ratios of the plate elements in the test specimens were chosen in the range near the current yield limit (AS4100-1998, etc.). The experimental studies presented in this paper have produced a better understanding of the structural behaviour of HSS members subjected to local instabilities. Comparisons have also presented in the paper regarding to the design predictions from the current steel standards (AS4100-1998). This study has enabled to provide a series of proposals for proper assessment of plate slenderness limits for structural members made of representative HSS materials. This research work also enables the inclusion of further versions in the steel design specifications for typical HSS materials to be used in buildings and bridges. This paper also presents a distribution model of residual stresses in the longitudinal direction for typical HSS I-sections.

Latent variable models in statistical genetics

Understanding the complexities that are involved in the genetics of multifactorial diseases is still a monumental task. In addition to environmental factors that can influence the risk of disease, there is also a number of other complicating factors. Genetic variants associated with age of disease onset may be different from those variants associated with overall risk of disease, and variants may be located in positions that are not consistent with the traditional protein coding genetic paradigm. Latent Variable Models are well suited for the analysis of genetic data. A latent variable is one that we do not directly observe, but which is believed to exist or is included for computational or analytic convenience in a model. This thesis presents a mixture of methodological developments utilising latent variables, and results from case studies in genetic epidemiology and comparative genomics. Epidemiological studies have identified a number of environmental risk factors for appendicitis, but the disease aetiology of this oft thought useless vestige remains largely a mystery. The effects of smoking on other gastrointestinal disorders are well documented, and in light of this, the thesis investigates the association between smoking and appendicitis through the use of latent variables. By utilising data from a large Australian twin study questionnaire as both cohort and case-control, evidence is found for the association between tobacco smoking and appendicitis. Twin and family studies have also found evidence for the role of heredity in the risk of appendicitis. Results from previous studies are extended here to estimate the heritability of age-at-onset and account for the eect of smoking. This thesis presents a novel approach for performing a genome-wide variance components linkage analysis on transformed residuals from a Cox regression. This method finds evidence for a dierent subset of genes responsible for variation in age at onset than those associated with overall risk of appendicitis. Motivated by increasing evidence of functional activity in regions of the genome once thought of as evolutionary graveyards, this thesis develops a generalisation to the Bayesian multiple changepoint model on aligned DNA sequences for more than two species. This sensitive technique is applied to evaluating the distributions of evolutionary rates, with the finding that they are much more complex than previously apparent. We show strong evidence for at least 9 well-resolved evolutionary rate classes in an alignment of four Drosophila species and at least 7 classes in an alignment of four mammals, including human. A pattern of enrichment and depletion of genic regions in the profiled segments suggests they are functionally significant, and most likely consist of various functional classes. Furthermore, a method of incorporating alignment characteristics representative of function such as GC content and type of mutation into the segmentation model is developed within this thesis. Evidence of fine-structured segmental variation is presented.

Investigation of mechanisms governing emission of odorants

The literature identifies several models that describe inter-phase mass transfer, key to the emission process. While the emission process is complex and these models may be more or less successful at predicting mass transfer rates, they identify three key variables for a system involving a liquid and an air phase in contact with it: • A concentration (or partial pressure) gradient driving force; • The fluid dynamic characteristics within the liquid and air phases, and • The chemical properties of the individual components within the system. In three applied research projects conducted prior to this study, samples collected with two well-known sampling devices resulted in very different odour emission rates. It was not possible to adequately explain the differences observed. It appeared likely, however, that the sample collection device might have artefact effects on the emission of odorants, i.e. the sampling device appeared to have altered the mass transfer process. This raised the obvious question: Where two different emission rates are reported for a single source (differing only in the selection of sampling device), and a credible explanation for the difference in emission rate cannot be provided, which emission rate is correct? This research project aimed to identify the factors that determine odour emission rates, the impact that the characteristics of a sampling device may exert on the key mass transfer variables, and ultimately, the impact of the sampling device on the emission rate itself. To meet these objectives, a series of targeted reviews, and laboratory and field investigations, were conducted. Two widely-used, representative devices were chosen to investigate the influence of various parameters on the emission process. These investigations provided insight into the odour emission process generally, and the influence of the sampling device specifically.

Australian foundations and the downturn

Building on the investigation of the Charity Commission (2009) on the effects of the economic downturn on the largest trusts and foundation in the United Kingdom, the purpose of this research was to assess the extent to which Australian trusts and foundations were taking an actively strategic approach to their investments and pursuit of mission (including grant-making), and the relationship between the two in the context of the economic downturn. Focus was given to identifying the issues raised as a consequence of the economic downturn, rather than providing a generalised snapshot of the ‘average’ foundations response. In September 2009, semi-structured, in depth interviews were conducted with executives of 23 grant making trusts and foundations. The interviews for this research focused on the largest grant makers in terms of grant expenditure, however included foundations from different geographical locations and from across different cause areas. It is important to stress at the outset that this was not a representative sample of foundations; the study aimed to identify issues rather than to present a representative picture of the ‘average’ foundation’s response. It is also important to note that the study was undertaken in September 2009 at a time when many foundations were beginning to feel more optimistic about the longer term future, but aware of continuing and possibly worsening short term income problems. But whatever the financial future, some of the underlying issues, concerning investment and grant making management practices, raised in this report will be of continuing relevance worthy of wider discussion. If a crisis is too good to waste, it is also too good to forget. One other introductory point – as previously noted, interviews for this study were conducted in September 2009 – just one month prior to the introduction of the new Private Ancillary Fund (PAF) legislation which replaced the previous Prescribed Private Fund (PPF) arrangement1. References to PAFs and/or PPFs reflect that time.

Community engagement : exploring a relational approach to consultation and collaborative practice in Australia

Community engagement is increasingly being employed by Australian organizations as a key strategy to incorporate representative community opinions into decision-making. This trend is reflected by Australian local and state governments legislating for community consultation in major infrastructure projects and the increasing role of public relations practitioners to manage these programs. This study explores community engagement founded on relational theory and proposed a typology of engagement employing a relational framework. An exploratory study of 20 Australian infrastructure projects with a mandatory consultation component is analyzed applying this framework. Results indicate little discrimination between the terms engagement, consultation, and participation; however, a range of tactics supported both collaborative and advocacy approaches. The implications for adopting a relational framework for community engagement programs are discussed.

The 2008 declaration of independence by the Hong Kong Court and anomalies in the Hong Kong Company Law

Discusses two aspects of Hong Kong law: 1) the judgment of the Hong Kong Court of Final Appeal in A Solicitor v The Law Society of Hong Kong on whether Hong Kong courts were bound, post-1997, by pre-1997 House of Lords or Privy Council decisions, by pre-1997 decisions of their own, or by post-1997 overseas decisions from any jurisdiction; and 2) the need for clarification in the Hong Kong Companies Ordinance of whether a company can have a single legal representative, the ultra vires rule and the duties of company directors

The 2006 CSRC guidelines for articles of Association of Chinese listed companies : critiquing from an Australian perspective

Compares the Chinese Securities and Regulatory Commission's guidelines for articles of association of listed companies issued in 2006 with 'replaceable' rules in the Australian Corporations Act 2001. Discusses the provisions of the Chinese guidelines and the Australian rules on corporate constitution, interpretation, a company's representative, object clauses, shareholders' powers and meetings and directors. Questions whether the Chinese guidelines facilitate effective corporate governance.

The culture of the Christian school

In discussions of educational administration theory, school culture has emerged as a contentious construct characterized by polarized positions. The underlying tensions are between conflicting structuralist and post-structuralist perspectives. These have led to views of Christian school culture and school organization as being either, on the one hand, static, positivist, hierarchical, individualistic and capitalistic or, on the other, dynamic, coherentist, communally interdependent, service oriented and Christ-centered. All schools demonstrate an ethos or organizational culture by default if not by design. It is therefore imperative for Christian school administrators, educators, and the community to consciously define the aspects of school culture that reflect the shared biblical values of the Christian school community.

Experience mapping : producing spatially continuous environment representations using RatSLAM

RatSLAM is a system for vision-based Simultaneous Localisation and Mapping (SLAM) inspired by models of the rodent hippocampus. The system can produce stable representations of large complex environments during robot experiments in both indoor and outdoor environments. These representations are both topological and metric in nature, and can involve multiple representations of the same place as well as discontinuities. In this paper we describe a new technique known as experience mapping that can be used online with the RatSLAM system to produce world representations known as experience maps. These maps group together multiple place representations and are spatially continuous. A number of experiments have been conducted in simulation and a real world office environment. These experiments demonstrate the high degree to which experience maps are representative of the spatial arrangement of the environment.