865 resultados para real interest rate, marginal product of capital, IS curve.


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Alveolar bone resorption results from the inflammatory response to periodontal pathogens. Systemic diseases that affect the host response, such as type 1 diabetes mellitus (DM1), can potentiate the severity of periodontal disease (PD) and accelerate bone resorption. However, the biological mechanisms by which DM1 modulates PD are not fully understood. The aim of this study was to determine the influence of DM1 on alveolar bone resorption and to evaluate the role of receptor activator of nuclear factor-kappaB ligand (RANKL)/osteoprotegerin (OPG) in osteoclastogenesis in rats. PD was induced by means of ligature in nondiabetic and in streptozotocyn-induced DM1 rats. Morphological and morphometric analyses, stereology and osteoclast counting were performed. RANKL and OPG mRNA levels, protein content, and location were determined. PD caused alveolar bone resorption, increased the number of osteoclasts in the alveolar bone crest and also promoted changes in RANKL/OPG mRNA expression. DM1 alone showed alveolar bone destruction and an increased number of osteoclasts at the periapical and furcal regions. DM1 exacerbated these characteristics, with a greater impact on bone structure, resulting in a low OPG content and a higher RANKL/OPG ratio, which correlated with prominent osteoclastogenesis. This work demonstrates that the effects of PD and DM1 enhance bone destruction, confirms the importance of the RANKL signaling pathway in bone destruction in DM1 in animal models and suggests the existence of alternative mechanisms potentiating bone degradation in PD.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study sought to assess the use of chlorhexidine with several excipients as a dentin surface treatment and its effect on marginal adaptation of class V restorations with current-generation dentin bonding agents. A total of 120 human third molars were selected and allocated into 12 groups, with standardized buccal class V restorations randomly divided into preconditioned dentin rinsed with: water; water + chlorhexidine; ethanol; or ethanol + chlorhexidine. After rinsing of dentin (previously conditioned with 35% phosphoric acid) with the test solutions, the Adper single bond 2, prime and bond 2.1, and Excite bonding systems were applied randomly. Restorations were performed with FiltekTM Z350 XT composite resin. The resulting specimens were subjected to thermal and mechanical load cycling. Quantitative analysis of marginal adaptation was performed on epoxy replicas by means of scanning electron microscopy. Results were assessed by means of the Kruskal-Wallis test (percentages of continuous margins) and Wilcoxon test (differences between percentages of continuous margins before and after thermal cycling and mechanical loading), at a significance level of p < 0.05. Outcomes in the chlorhexidine-treated groups were not superior to those obtained with other treatments.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

To the practitioners of resistance exercise, a better performance is associated with nutritional habits and the help of nutritional supplements. Whatever, this use has been made improperly and without foundation, advised by persons not trained, leading to misuse. To analyze the profile of practitioners in the knowledge of and access to supplements, as well as knowledge about the sport and the need to use additional food resources. A questionnaire will be used to youths aged 15 to 21 consumers of nutritional supplements on the sports, the substance used, why the substance used, who appointed her, which substances have been used, satisfaction with that product, and socioeconomic characteristics of the individual. The data will be correlated by Pearson's correlation coefficient. It is expected that the abuse of supplements is associated with ease by socioeconomic status and experience in the sport for the little progress with the adoption of a routine training exercise in the circumstances only. The major difference compared to the goal of practice, was the motivation for the improvement of physical fitness (Guaruja 21% and Bauru 9.6%), with the intention of increasing muscle mass response occurring closer (Guaruja 22% and Bauru 19.2%) among respondents, and reported more emphasis on the Interior Health (17.3%). The use of supplements is somewhat similar to trends involving body aesthetics and fitness for participation in sports, in the Coast (hypertrophy: 33% body fat reduction, improved endurance and improved performance in sports: 20%), and beauty, fitness and health, the Interior (hypertrophy: 41% increase in strength: 22%, and quality of life: 15%). Interest in the use of supplements is mostly aimed at the improvement of overload training (Guaruja 67% and Bauru 56%) but the sources of information on the use of supplements have become more secure among the respondents of the Interior (gym teacher: 20%, Conferences and Symposia: 12%, and the...

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Processo FAPESP: 2012/24545-3

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objective The present study aimed to examine the reproducibility of heart rate (HR) and rating of perceived exertion (RPE) values obtained during different incremental treadmill tests. Equipment and methods Twenty male, recreational, endurance-trained runners (10-km running pace: 10–15 km·h−1) performed, in a counterbalanced order, three continuous incremental exercise tests with different speed increments (0.5 km·h−1, 1 km·h−1 and 2 km·h−1). Thereafter, each participant performed the three tests again, maintaining the same order as before. The reproducibility of the HR and RPE values were analyzed for all protocols during submaximal intensities (8, 10, 12, and 14 km·h−1). In addition, it was examined the reproducibility of maximal HR (HRmax) and peak RPE (RPEpeak). Results The variability of both the HR and RPE values showed a tendency to decrease over the stages during the incremental test and was not or slightly influenced by the incremental test design. The HR at 14 km·h−1 and HRmax presented the highest reproducibility (CV < 2%). In contrast, the submaximal RPE values showed higher variability indices (i.e., CV > 5.0%). In conclusion, the HR values were highly reproducible during the stages of the incremental test, in contrast to the RPE values that presented limited reproducibility.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Despite their immunosuppressive effects, corticosteroids have long been used as adjunct therapy (aCST) in the treatment of infectious diseases. The rationale is that in certain infections it is necessary to decrease the exacerbated host's inflammatory response, which can otherwise result in tissue damage and organ dysfunction. In fact, a major concern in treating paracoccidioidomycosis (PCM) is the host's intense inflammatory response to Paracoccidioides brasiliensis, which can be further intensified by antifungal therapy. Depending on its localization, this immunological phenomenon may be life threatening or result in permanent sequels, as is the case for some patients with cerebral or laryngeal involvement. However, the literature on aCST in paracoccidioidomycosis treatment is scarce and as a result we present our recent experience in the management of four patients with severe PCM manifestations, i.e., cerebral paracoccidioidal granuloma, laryngeal stenosis, compressive abdominal mass, and exacerbated inflammatory response with tissue destruction. In addition to the antifungal therapy, these patients required aCST, which probably promoted their clinical improvement and/or prevented serious complications. We suggest that aCST: (a) can potentially help in the management of selected cases of severe forms of PCM, particularly when there is a risk of acute complications, and (b) that it can be used safely provided that the risk-benefit ratio is carefully weighed. Well-controlled, prospective studies of aCST in the treatment of severe cases of paracoccidioidomycosis are needed to better define its role in the management of PCM.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The Atlantic Forest is an excellent case study for the elevational diversity of birds, and some inventories along elevational gradients have been carried out in Brazil. Since none of these studies explain the patterns of species richness with elevation, we herein review all Brazilian studies on bird elevational diversity, and test a geometric constraint null model that predicts a unimodal species-altitude curve, the Mid-domain Effect (MDE). We searched for bird inventories in the literature and also analysed our own survey data using limited-radius point counts along an 800 m elevational gradient in the state of São Paulo, Brazil. We found 10 investigations of elevational diversity of Atlantic Forest birds and identified five different elevational patterns: monotonic decreasing diversity, constant at low elevations, constant at low elevations but increasing towards the middle, and two undescribed patterns for Atlantic Forest birds, trough-shaped and increasing diversity. The average MDE fit was low (r² = 0.31) and none of the MDE predictions were robust across all gradients. Those studies with good MDE model fits had obvious sampling bias. Although it has been proposed that the MDE may be positively associated with the elevational diversity of birds, it does not fit the Brazilian Atlantic Forest bird elevational diversity.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The motivation for the work presented in this thesis is to retrieve profile information for the atmospheric trace constituents nitrogen dioxide (NO2) and ozone (O3) in the lower troposphere from remote sensing measurements. The remote sensing technique used, referred to as Multiple AXis Differential Optical Absorption Spectroscopy (MAX-DOAS), is a recent technique that represents a significant advance on the well-established DOAS, especially for what it concerns the study of tropospheric trace consituents. NO2 is an important trace gas in the lower troposphere due to the fact that it is involved in the production of tropospheric ozone; ozone and nitrogen dioxide are key factors in determining the quality of air with consequences, for example, on human health and the growth of vegetation. To understand the NO2 and ozone chemistry in more detail not only the concentrations at ground but also the acquisition of the vertical distribution is necessary. In fact, the budget of nitrogen oxides and ozone in the atmosphere is determined both by local emissions and non-local chemical and dynamical processes (i.e. diffusion and transport at various scales) that greatly impact on their vertical and temporal distribution: thus a tool to resolve the vertical profile information is really important. Useful measurement techniques for atmospheric trace species should fulfill at least two main requirements. First, they must be sufficiently sensitive to detect the species under consideration at their ambient concentration levels. Second, they must be specific, which means that the results of the measurement of a particular species must be neither positively nor negatively influenced by any other trace species simultaneously present in the probed volume of air. Air monitoring by spectroscopic techniques has proven to be a very useful tool to fulfill these desirable requirements as well as a number of other important properties. During the last decades, many such instruments have been developed which are based on the absorption properties of the constituents in various regions of the electromagnetic spectrum, ranging from the far infrared to the ultraviolet. Among them, Differential Optical Absorption Spectroscopy (DOAS) has played an important role. DOAS is an established remote sensing technique for atmospheric trace gases probing, which identifies and quantifies the trace gases in the atmosphere taking advantage of their molecular absorption structures in the near UV and visible wavelengths of the electromagnetic spectrum (from 0.25 μm to 0.75 μm). Passive DOAS, in particular, can detect the presence of a trace gas in terms of its integrated concentration over the atmospheric path from the sun to the receiver (the so called slant column density). The receiver can be located at ground, as well as on board an aircraft or a satellite platform. Passive DOAS has, therefore, a flexible measurement configuration that allows multiple applications. The ability to properly interpret passive DOAS measurements of atmospheric constituents depends crucially on how well the optical path of light collected by the system is understood. This is because the final product of DOAS is the concentration of a particular species integrated along the path that radiation covers in the atmosphere. This path is not known a priori and can only be evaluated by Radiative Transfer Models (RTMs). These models are used to calculate the so called vertical column density of a given trace gas, which is obtained by dividing the measured slant column density to the so called air mass factor, which is used to quantify the enhancement of the light path length within the absorber layers. In the case of the standard DOAS set-up, in which radiation is collected along the vertical direction (zenith-sky DOAS), calculations of the air mass factor have been made using “simple” single scattering radiative transfer models. This configuration has its highest sensitivity in the stratosphere, in particular during twilight. This is the result of the large enhancement in stratospheric light path at dawn and dusk combined with a relatively short tropospheric path. In order to increase the sensitivity of the instrument towards tropospheric signals, measurements with the telescope pointing the horizon (offaxis DOAS) have to be performed. In this circumstances, the light path in the lower layers can become very long and necessitate the use of radiative transfer models including multiple scattering, the full treatment of atmospheric sphericity and refraction. In this thesis, a recent development in the well-established DOAS technique is described, referred to as Multiple AXis Differential Optical Absorption Spectroscopy (MAX-DOAS). The MAX-DOAS consists in the simultaneous use of several off-axis directions near the horizon: using this configuration, not only the sensitivity to tropospheric trace gases is greatly improved, but vertical profile information can also be retrieved by combining the simultaneous off-axis measurements with sophisticated RTM calculations and inversion techniques. In particular there is a need for a RTM which is capable of dealing with all the processes intervening along the light path, supporting all DOAS geometries used, and treating multiple scattering events with varying phase functions involved. To achieve these multiple goals a statistical approach based on the Monte Carlo technique should be used. A Monte Carlo RTM generates an ensemble of random photon paths between the light source and the detector, and uses these paths to reconstruct a remote sensing measurement. Within the present study, the Monte Carlo radiative transfer model PROMSAR (PROcessing of Multi-Scattered Atmospheric Radiation) has been developed and used to correctly interpret the slant column densities obtained from MAX-DOAS measurements. In order to derive the vertical concentration profile of a trace gas from its slant column measurement, the AMF is only one part in the quantitative retrieval process. One indispensable requirement is a robust approach to invert the measurements and obtain the unknown concentrations, the air mass factors being known. For this purpose, in the present thesis, we have used the Chahine relaxation method. Ground-based Multiple AXis DOAS, combined with appropriate radiative transfer models and inversion techniques, is a promising tool for atmospheric studies in the lower troposphere and boundary layer, including the retrieval of profile information with a good degree of vertical resolution. This thesis has presented an application of this powerful comprehensive tool for the study of a preserved natural Mediterranean area (the Castel Porziano Estate, located 20 km South-West of Rome) where pollution is transported from remote sources. Application of this tool in densely populated or industrial areas is beginning to look particularly fruitful and represents an important subject for future studies.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In this thesis we investigated the versatility and the potential applications of different kinds of alkylidene malonates, acetoacetates, malonamides and acetoacetoamides. Our research group devoted great attention to this kind of compounds since alkylidenes can be considered important intermediates in the synthesis of several scaffolds, to be inserted into molecules of potential biological and pharmaceutical interest. The increasing use of alkylidenes is due to their ability to react as unsaturated electrophiles and to the possibility to exploit them as intermediates for the introduction of different kind of functionalities.The preparation of alkylidene malonates, acetoacetates, malonamides and acetoacetoamides is presented in chapter 1. This section deals with different preparation methods of alkylidenes that we developed during the last few years and to the technologies involved for each synthetic protocol. The reactivity that allowed to use the alkylidenes as intermediates in the synthesis of scaffolds for biologically active compounds is shown in chapter 2. In particular, we will discuss the most important reactions used to obtain the desired molecules, and we will focus on the most interesting aspects of these latter ones. Finally, chapter 3 will illustrate the potential applications and the related syntheses of potential bioactive compounds. The synthesized molecules find application in several fields and for this reason we considered each class of compounds in its related branch of interest.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Zusammenfassung Der ca. 1.555 m lange Tunnel Fernthal wurde von 1998 bis 2000 im Zuge der Bundesbahn-Neubaustrecke Köln – Rhein/Main erstellt. Der Tunnel durchquert devonische Schichten des Rechtsrheinischen Schiefergebirges. Die Ton- und Sandsteine sind tiefgründig verwittert, intensiv verfaltet mit wechselnden Vergenzen der Faltenschenkel und zudem stark durch Trennflächen zerlegt. Beim Auffahren des Tunnel Fernthal sind Phänomene in Bezug auf die Wechselwirkung zwischen dem Grundwasser und dem Tunnel sowie dem Fels und dem Tunnel beobachtet worden, die vom Verfasser der vorliegenden Arbeit im Nachgang der Baumaßnahme vertieft ausgewertet und interpretiert werden.Innerhalb von zwanzig strukturgeologischen Homogenbereichen wurden die geotechnisch und strukturgeologisch bestimmenden Einflussfaktoren (z.B. ungünstig zum Hohlraum einfallende Schichtung oder Querklüftung mit hohem Durchtrennungsgrad) im Hinblick auf Ihre Auswirkung auf die Sicherung der Ortsbrust und damit die Vortriebsgeschwindigkeit quantifiziert. Über das Produkt der den Vortrieb bestimmenden Einzelfaktoren wurde für den jeweiligen Homogenbereich ein Gesamteinflussfaktor errechnet.Aus dem neu eingeführten Gesamteinflussfaktors fn gesamt lassen sich dabei Empfehlungen über die notwendigen Sicherungsmaßnahmen im Bereich der Ortsbrust ableiten und Einteilungen in Ausbruchsklassen vornehmen. Über die Bewertungsmatrix und den sich daraus ergebenen Gesamteinflussfaktor können reduzierte Vortriebsgeschwindigkeiten ausgehend von einer 'idealen' Vortriebsgeschwindigkeit näherungsweise errechnet werden. Mithilfe der Bewertungsmatrix lässt sich die bautechnischen Eigenschaften des Gebirges besser bewerten. So zeigt sich im Rahmen dieser Arbeit deutlich, dass es bei einem vergenten Faltengebirge günstiger ist, den Tunnel gegen die Vergenz von Faltenschenkeln aufzufahren. Somit können schon im Vorfeld einer Tunnelbaumaßnahme verschiedene Vortriebsschemata durchrechnet werden. Neben der besseren Prognose von notwendigen Sicherungsmaßnahmen kann durch den Zeitgewinn auch ein finanzieller Vorteil für die Beteiligten entstehen.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In order to understand how nanoparticles (NPs <100 nm) interact with cellular systems, potentially causing adverse effects, it is important to be able to detect and localize them within cells. Due to the small size of NPs, transmission electron microscopy (TEM) is an appropriate technique to use for visualizing NPs inside cells, since light microscopy fails to resolve them at a single particle level. However, the presence of other cellular and non-cellular nano-sized structures in TEM cell samples, which may resemble NPs in size, morphology and electron density, can obstruct the precise intracellular identification of NPs. Therefore, elemental analysis is recommended to confirm the presence of NPs inside the cell. The present study highlights the necessity to perform elemental analysis, specifically energy filtering TEM, to confirm intracellular NP localization using the example of quantum dots (QDs). Recently, QDs have gained increased attention due to their fluorescent characteristics, and possible applications for biomedical imaging have been suggested. Nevertheless, potential adverse effects cannot be excluded and some studies point to a correlation between intracellular particle localization and toxic effects. J774.A1 murine macrophage-like cells were exposed to NH2 polyethylene (PEG) QDs and elemental co-localization analysis of two elements present in the QDs (sulfur and cadmium) was performed on putative intracellular QDs with electron spectroscopic imaging (ESI). Both elements were shown on a single particle level and QDs were confirmed to be located inside intracellular vesicles. Nevertheless, ESI analysis showed that not all nano-sized structures, initially identified as QDs, were confirmed. This observation emphasizes the necessity to perform elemental analysis when investigating intracellular NP localization using TEM.