H1 but not H2 histamine antagonist receptors mediate anxiety-related behaviors and emotional memory deficit in mice subjected to elevated plus-maze testing

This study investigated the role of H1 and H2 receptors in anxiety and the retrieval of emotional memory using a Trial 1/Trial 2 (T1/T2) protocol in an elevated plus-maze (EPM). Tests were performed on 2 consecutive days, designated T1 and T2. Before T1, the mice received intraperitoneal injections of saline (SAL), 20 mg/kg zolantidine (ZOL, an H2receptor antagonist), or 8.0 or 16 mg/kg chlorpheniramine (CPA, an H1 receptor antagonist). After 40 min, they were subjected to the EPM test. In T2 (24 h later), each group was subdivided into two additional groups, and the animals from each group were re-injected with SAL or one of the drugs. In T1, the Student t-test showed no difference between the SAL and ZOL or 8 mg/kg CPA groups with respect to the percentages of open arm entries (%OAE) and open arm time (%OAT). However, administration of CPA at the highest dose of 16 mg/kg decreased %OAE and %OAT, but not locomotor activity, indicating anxiogenic-like behavior. Emotional memory, as revealed by a reduction in open arm exploration between the two trials, was observed in all experimental groups, indicating that ZOL and 8 mg/kg CPA did not affect emotional memory, whereas CPA at the highest dose affected acquisition and consolidation, but not retrieval of memory. Taken together, these results suggest that H1 receptor, but not H2, is implicated in anxiety-like behavior and in emotional memory acquisition and consolidation deficits in mice subjected to EPM testing.

A spheroid-based 3-D culture model for pancreatic cancer drug testing, using the acid phosphatase assay

Current therapy for pancreatic cancer is multimodal, involving surgery and chemotherapy. However, development of pancreatic cancer therapies requires a thorough evaluation of drug efficacy in vitro before animal testing and subsequent clinical trials. Compared to two-dimensional culture of cell monolayer, three-dimensional (3-D) models more closely mimic native tissues, since the tumor microenvironment established in 3-D models often plays a significant role in cancer progression and cellular responses to the drugs. Accumulating evidence has highlighted the benefits of 3-D in vitro models of various cancers. In the present study, we have developed a spheroid-based, 3-D culture of pancreatic cancer cell lines MIAPaCa-2 and PANC-1 for pancreatic drug testing, using the acid phosphatase assay. Drug efficacy testing showed that spheroids had much higher drug resistance than monolayers. This model, which is characteristically reproducible and easy and offers rapid handling, is the preferred choice for filling the gap between monolayer cell cultures and in vivo models in the process of drug development and testing for pancreatic cancer.

Intensity and physiological responses to the 6-minute walk test in middle-aged and older adults: a comparison with cardiopulmonary exercise testing

The 6-minute walk test (6MWT) is a simple field test that is widely used in clinical settings to assess functional exercise capacity. However, studies with healthy subjects are scarce. We hypothesized that the 6MWT might be useful to assess exercise capacity in healthy subjects. The purpose of this study was to evaluate 6MWT intensity in middle-aged and older adults, as well as to develop a simple equation to predict oxygen uptake ( V ˙ O 2 ) from the 6-min walk distance (6MWD). Eighty-six participants, 40 men and 46 women, 40-74 years of age and with a mean body mass index of 28±6 kg/m2, performed the 6MWT according to American Thoracic Society guidelines. Physiological responses were evaluated during the 6MWT using a K4b2 Cosmed telemetry gas analyzer. On a different occasion, the subjects performed ramp protocol cardiopulmonary exercise testing (CPET) on a treadmill. Peak V ˙ O 2 in the 6MWT corresponded to 78±13% of the peak V ˙ O 2 during CPET, and the maximum heart rate corresponded to 80±23% of that obtained in CPET. Peak V ˙ O 2 in CPET was adequately predicted by the 6MWD by a linear regression equation: V ˙ O 2 mL·min-1·kg-1 = -2.863 + (0.0563×6MWDm) (R2=0.76). The 6MWT represents a moderate-to-high intensity activity in middle-aged and older adults and proved to be useful for predicting cardiorespiratory fitness in the present study. Our results suggest that the 6MWT may also be useful in asymptomatic individuals, and its use in walk-based conditioning programs should be encouraged.

Model-based testing of software systems : functionality and performance

Software is a key component in many of our devices and products that we use every day. Most customers demand not only that their devices should function as expected but also that the software should be of high quality, reliable, fault tolerant, efficient, etc. In short, it is not enough that a calculator gives the correct result of a calculation, we want the result instantly, in the right form, with minimal use of battery, etc. One of the key aspects for succeeding in today's industry is delivering high quality. In most software development projects, high-quality software is achieved by rigorous testing and good quality assurance practices. However, today, customers are asking for these high quality software products at an ever-increasing pace. This leaves the companies with less time for development. Software testing is an expensive activity, because it requires much manual work. Testing, debugging, and verification are estimated to consume 50 to 75 per cent of the total development cost of complex software projects. Further, the most expensive software defects are those which have to be fixed after the product is released. One of the main challenges in software development is reducing the associated cost and time of software testing without sacrificing the quality of the developed software. It is often not enough to only demonstrate that a piece of software is functioning correctly. Usually, many other aspects of the software, such as performance, security, scalability, usability, etc., need also to be verified. Testing these aspects of the software is traditionally referred to as nonfunctional testing. One of the major challenges with non-functional testing is that it is usually carried out at the end of the software development process when most of the functionality is implemented. This is due to the fact that non-functional aspects, such as performance or security, apply to the software as a whole. In this thesis, we study the use of model-based testing. We present approaches to automatically generate tests from behavioral models for solving some of these challenges. We show that model-based testing is not only applicable to functional testing but also to non-functional testing. In its simplest form, performance testing is performed by executing multiple test sequences at once while observing the software in terms of responsiveness and stability, rather than the output. The main contribution of the thesis is a coherent model-based testing approach for testing functional and performance related issues in software systems. We show how we go from system models, expressed in the Unified Modeling Language, to test cases and back to models again. The system requirements are traced throughout the entire testing process. Requirements traceability facilitates finding faults in the design and implementation of the software. In the research field of model-based testing, many new proposed approaches suffer from poor or the lack of tool support. Therefore, the second contribution of this thesis is proper tool support for the proposed approach that is integrated with leading industry tools. We o er independent tools, tools that are integrated with other industry leading tools, and complete tool-chains when necessary. Many model-based testing approaches proposed by the research community suffer from poor empirical validation in an industrial context. In order to demonstrate the applicability of our proposed approach, we apply our research to several systems, including industrial ones.

Spectrally Tuned Lanthanide Photoluminescence for Point-of-Care Testing

Point-of-care (POC) –diagnostics is a field with rapidly growing market share. As these applications become more widely used, there is an increasing pressure to improve their performance to match the one of a central laboratory tests. Lanthanide luminescence has been widely utilized in diagnostics because of the numerous advantages gained by the utilization of time-resolved or anti-Stokes detection. So far the use of lanthanide labels in POC has been scarce due to limitations set by the instrumentation required for their detection and the shortcomings, e.g. low brightness, of these labels. Along with the advances in the research of lanthanide luminescence, and in the field of semiconductors, these materials are becoming a feasible alternative for the signal generation also in the future POC assays. The aim of this thesis was to explore ways of utilizing time-resolved detection or anti-Stokes detection in POC applications. The long-lived fluorescence for the time-resolved measurement can be produced with lanthanide chelates. The ultraviolet (UV) excitation required by these chelates is cumbersome to produce with POC compatible fluorescence readers. In this thesis the use of a novel light-harvesting ligand was studied. This molecule can be used to excite Eu(III)-ions at wavelengths extending up to visible part of the spectrum. An enhancement solution based on this ligand showed a good performance in a proof-of-concept -bioaffinity assay and produced a bright signal upon 365 nm excitation thanks to the high molar absorptivity of the chelate. These features are crucial when developing miniaturized readers for the time-resolved detection of fluorescence. Upconverting phosphors (UCPs) were studied as an internal light source in glucose-sensing dry chemistry test strips and ways of utilizing their various emission wavelengths and near-infrared excitation were explored. The use of nanosized NaYF :Yb3+,Tm3+-particles enabled the replacement of an external UV-light source with a NIR-laser and gave an additional degree of freedom in the optical setup of the detector instrument. The new method enabled a blood glucose measurement with results comparable to a current standard method of measuring reflectance. Microsized visible emitting UCPs were used in a similar manner, but with a broad absorbing indicator compound filtering the excitation and emission wavelengths of the UCP. This approach resulted in a novel way of benefitting from the non-linear relationship between the excitation power and emission intensity of the UCPs, and enabled the amplification of the signal response from the indicator dye.

Automated UI testing. WBCT, a computer-automated user test environment tool.

Today, the user experience and usability in software application are becoming a major design issue due to the adaptation of many processes using new technologies. Therefore, the study of the user experience and usability might be included in every software development project and, thus, they should be tested to get traceable results. As a result of different testing methods to evaluate the concepts, a non-expert on the topic might have doubts on which option he/she should opt for and how to interpret the outcomes of the process. This work aims to create a process to ease the whole testing methodology based on the process created by Seffah et al. and a supporting software tool to follow the procedure of these testing methods for the user experience and usability.

Development of techniques for testing the effect of the E1 region on adenovirus integration /

Adenoviral vectors are currently the most widely used gene therapeutic vectors, but their inability to integrate into host chromosomal DNA shortened their transgene expression and limited their use in clinical trials. In this project, we initially planned to develop a technique to test the effect of the early region 1 (E1) on adenovirus integration by comparing the integration efficiencies between an E1-deleted adenoviral vector (SubE1) and an Elcontaining vector (SubE3). However, we did not harvest any SubE3 virus, even if we repeated the transfection and successfully rescued the SubE1 virus (2/4 transfections generated viruses) and positive control virus (6/6). The failure of rescuing SubE3 could be caused by the instability of the genomic plasmid pFG173, as it had frequent intemal deletions when we were purifying It. Therefore, we developed techniques to test the effect of E1 on homologous recombination (HR) since literature suggested that adenovirus integration is initiated by HR. We attempted to silence the E1 in 293 cells by transfecting E1A/B-specific small interfering RNA (siRNA). However, no silenced phenotype was observed, even if we varied the concentrations of E1A/B siRNA (from 30 nM to 270 nM) and checked the silencing effects at different time points (48, 72, 96 h). One possible explanation would be that the E1A/B siRNA sequences are not potent enough to Induce the silenced phenotype. For evaluating HR efficiencies, an HR assay system based on bacterial transfonmatJon was designed. We constmcted two plasmids ( designated as pUC19-dl1 and pUC19-dl2) containing different defective lacZa cassettes (forming white colonies after transformation) that can generate a functional lacZa cassette (forming blue colonies) through HR after transfecting into 293 cells. The HR efficiencies would be expressed as the percentages of the blue colonies among all the colonies. Unfortunately, after transfonnation of plasmid isolated from 293 cells, no colony was found, even at a transformation efficiency of 1.8x10^ colonies/pg pUC19, suggesting the sensitivity of this system was low. To enhance the sensitivity, PCR was used. We designed a set of primers that can only amplify the recombinant plasmid fomied through HR. Therefore, the HR efficiencies among different treatments can be evaluated by the amplification results, and this system could be used to test the effect of E1 region on adenovirus integration. In addition, to our knowledge there was no previous studies using PCR/ Realtime PCR to evaluate HR efficiency, so this system also provides a PCR-based method to carry out the HR assays.

Attachment and alcohol : testing a motivational model of problem drinking /

The purpose of this study was to replicate and extend a motivational model of problem drinking (Cooper, Frone, Russel, & Mudar, 1995; Read, Wood, Kahler, Maddock & Tibor, 2003), testing the notion that attachment is a common antecedent for both the affective and social paths to problem drinking. The model was tested with data from three samples, first-year university students (N=679), students about to graduate from university (N=206), and first-time clients at an addiction treatment facility (N=21 1). Participants completed a battery of questionnaires assessing alcohol use, alcohol-related consequences, drinking motives, peer models of alcohol use, positive and negative affect, attachment anxiety and attachment avoidance. Results underscored the importance of the affective path to problem drinking, while putting the social path to problem drinking into question. While drinking to cope was most prominent among the clinical sample, coping motives served as a risk factor for problem drinking for both individuals identified as problem drinkers and university students. Moreover, drinking for enhancement purposes appeared to be the strongest overall predictor of alcohol use. Results of the present study also supported the notion that attachment anxiety and avoidance are antecedents for the affective path to problem drinking, such that those with higher levels of attachment anxiety and avoidance were more vulnerable to experiencing adverse consequences related to their drinking, explained in terms of diminished affect regulation. Evidence that nonsecure attachment is a potent predictor of problem drinking was also demonstrated by the finding that attachment anxiety was directly related to alcohol-related consequences over and above its indirect relationship through affect regulation. However, results failed to show that attachment anxiety or attachment avoidance increased the risk of problem drinking via social influence.

Factors affecting performance proficiency : a case study involving intermediate piano students

The goal of this study was to determine the effect of a number of factors on the performance proficiency of three intermediate piano students having different learning styles, all of whom shared the same teacher. Four sets of data were collected in this investigation: the methodology of the teacher; the practice behaviour of the participants; the effect of intrinsic factors, such as participant attitude, motivation, and ownership of learning; and the effect of extrinsic factors that included parental influence, and participants' school- and employment-related responsibilities. Performance proficiency and assessment of practice behaviour were measured by three external, professionallyqualified music examiners. Performance proficiency varied to some extent between participants, but they shared similar practice behaviours. Learning style does not, therefore, affect practice behaviour. Although they planned their practice time, participants did not show much evidence of monitoring the quality of their practice. On the other hand, participants showed positive attitude; they were motivated to learn; and they were observed to plan their practice time, all indicators of, among other things, positive influence of the teacher and parents. Participants showed evidence that these constructive habits were a denominator common to both their schoolwork and piano practice. It was apparent that, except for learning style, all factors examined had an effect on performance proficiency. Performance proficiency is, therefore, influenced by a large web of factors, a finding that is instructive for classroom teachers. Teachers need to avoid the temptation to teach toward performance expectations. Emphasis should be placed instead on teaching and assessing formative learning strategies.

The influence of physical activity behaviour on the relationship between motor proficiency and body composition in children

There is an emerging awareness that children with poor motor abilities are at particular risk for overweight. This cross-sectional study examined the influence of physical activity behaviour on the relationship between motor proficiency and body composition. Participants were 1287 (646 males, 641 females) Grade 6 students in the Physical Health Activity Study project. Height, weight, waist girth, and motor proficiency (Bruininks-Oseretsky Test of Motor Performance BOTMP-SF) were assessed. Physical activity behaviours were also evaluated with a multifaceted approach and reported for school-based, non-school based physical activity, free-time play, and sedentary activities (Participation Questionnaire), and leisure time exercise (Godin-Shephard Leisure Time Exercise Questionnaire GS). Overweight was defined by BMI scores: boys :::20.6-21.2 and <25.1-26.0; girls: ::: 20.7-21.7and <25.4-26.7 and obesity was defined as: boys:::: 25.1-26.0; girls: :::25.4-26.7. Children were classified as case group (CG,::; 10% on BOTMP-SF), borderline case group (BC, > 10% to ::; 20% on BOTMP-SF) or non-case group. Analyses of variance (ANOVAs) uncovered a significant difference in overweight and obesity between the case group and non-case group. Normal-weight children reported higher participation in organized school-sports (intra-mural and inter-school teams). The CG reported significantly lower participation in school sports teams and lower GS results, with a trend towards lower participation in all active pursuits. They also reported a significantly higher duration of television watching and book reading. There were no significant differences between motor proficiency groups by gender, age, nonschool sports, or free-time activity. Multivariate ordinal logistic regression analysis showed that the case group was 10.9 times more likely to be overweight/obese than their peers. No single aspect of physical activity was able to explain the difference in odds ratios for the motor proficiency groups. However, for the entire cohort, children who participated in more organized school sports were less likely to be overweight/obese. These findings confirm that children with low motor proficiency are at significant risk of developing overweight. It is evident that these children have generally attenuated activity levels and heightened levels of sedentary pursuits. School-based activities appear particularly limited, and are the one area where children have near autonomy in their decision to pursue active opportunities. The promotion of school-based programs, specifically intramural sports may be an important aspect in increasing children's overall activity levels. It is also essential to consider the needs of those children with low motor proficiency when designing activity promotion programs. Future research should further explore motor proficiency and overweight/obesity.

Investigating the association between motor proficiency and body satisfaction in grade 5 children

The inverse relationships between motor proficiency and overweight, and between overweight and body satisfaction have been well documented. However, the association between motor proficiency and body satisfaction has been largely neglected in the literature. Knowledge of the influence that low motor proficiency may have on body satisfaction is essential if the full burden that those children with poor motor abilities face is to be fully recognized, as low body satisfaction has been linked to an increased risk for low self-esteem, depression, and disordered eating. The cohort investigated in this report included 1907 (971 males, 936 female) Grade 5 students from the Physical Health Activity Study Team (PHAST) project in the Niagara Region of Southern Ontario. Children were grouped as overweight or healthy weight (using BMI cut offs for age and gender), and as low motor proficiency or normal motor proficiency (cut-off set at lowest 10% Bruininks Oseretsky Test of Motor Proficiency-short form (BOTMPsf). It was apparent from analyses of variance (ANOVAs) by gender that boys demonstrated significantly higher motor proficiency scores. As a result separate multiple logistic regressions by gender were used to determine the relationship between body satisfaction, BMI, and motor proficiency. There was a significant relationship between BMI and body satisfaction for both genders (p<0.01) and for males a significant relationship between motor proficiency and body satisfaction (p<0.03). Overweight females were less likely to be satisfied with their bodies with an odds ratio (OR) of 0.33 (CI: 0.23-0.47). The same trend was found in overweight males (OR: 0.42, CI: 0.29-0.59). Males with low motor proficiency were significantly less satisfied with their bodies (OR: 0.53, CI: 0.29-0.97). Males with poor motor proficiency were at greater risk for low body satisfaction regardless of their overweight status. Overweight is known to be prevalent among children with low motor proficiency and, these results indicate that low body satisfaction is also a significant concern. These findings confirm that attention needs to be paid to perceptions of body satisfaction among children with low motor proficiency. This is particularly true for boys, as their bodies may fail them in two common societal expectations, shape and skill and for whom their risk of low body satisfaction is heightened by their poor motor proficiency.

The role of physical activity and perceived adequacy on cardiorespiratory fitness in children with developmental coordination disorder

Evidence suggests that children with developmental coordination disorder (DCD) have lower levels of cardiorespiratory fitness (CRF) compared to children without the condition. However, these studies were restricted to field-based methods in order to predict V02 peak in the determination of CRF. Such field tests have been criticised for their ability to provide a valid prediction of V02 peak and vulnerability to psychological aspects in children with DCD, such as low perceived adequacy toward physical activity. Moreover, the contribution of physical activity to the variance in V02 peak between the two groups is unknown. The purpose of our study was to determine the mediating role of physical activity and perceived adequacy towards physical activity on V02 peak in children with significant motor impairments. This prospective case-control design involved 122 (age 12-13 years) children with significant motor impairments (n=61) and healthy matched controls (n=61) based on age, gender and school location. Participants had been previously assessed for motor proficiency and classified as a probable DCD (p-DCD) or healthy control using the movement ABC test. V02 peak was measured by a progressive exercise test on a cycle ergometer. Perceived adequacy was measured using a 7 -item subscale from Children's Selfperception of Adequacy and Predilection for Physical Activity scale. Physical activity was monitored for seven days with the Actical® accelerometer. Children with p-DCD had significantly lower V02 peak (48.76±7.2 ml/ffm/min; p:50.05) compared to controls (53.12±8.2 ml/ffm/min), even after correcting for fat free mass. Regression analysis demonstrated that perceived adequacy and physical activity were significant mediators in the relationship between p-DCD and V02 peak. In conclusion, using a stringent laboratory assessment, the results of the current study verify the findings of earlier studies, adding low CRF to the list of health consequences associated with DCD. It seems that when testing for CRF in this population, there is a need to consider the psychological barriers associated with their condition. Moreover, strategies to increase physical activity in children with DCD may result in improvement in their CRF.

Mediating Influence of Physical Fitness on the Relationship between Academic Performance and Motor Proficiency

We explored the potential mediating influence of physical fitness on the relationship between academic performance and motor proficiency in children. 1864 students (F:926, M:938, age 11.91 (SD:0.34). Academic achievement was derived from an average of standardized tests of reading, writing, and math. The Bruininks-Oseretsky Test of Motor Performance (short-form) determined motor proficiency. Fitness (peak oxygen uptake) was established with the Léger 20-m Shuttle Run Test. OLS regression identified several significant predictors of academic performance. After controlling for age (p=0.0135), gender (p<0.0001), and parental education (p<0.0001), motor proficiency (p<0.0001), was significant. After adding physical fitness (p=0.0030) to the model the effect of motor proficiency remained significant however the point estimate was reduced from 0.0034 (p<0.0001) to 0.0026 (p<0.0001). These results suggest that physical fitness plays a mediating role on the relationship between academic performance and motor proficiency although both aerobic fitness and motor proficiency have independent roles.

The Effect of Trainer Muscularity and Expertise on Self-Presentational Concerns, Body Image, and Performance in College Men during One-Repetition Maximum Testing

This study attempted to manipulate self-presentational efficacy to examine the effect on social anxiety, social physique anxiety, drive for muscularity, and maximal strength performance during a one-repetition maximum (1-RM) chest press and leg press test. Ninety-nine college men with a minimum of six months of previous weight training experience were randomly assigned to complete a 1-RM protocol with either a muscular male trainer described as an expert or a lean male trainer described as a novice. Participants completed measures of self-presentation and body image prior to meeting their respective trainer, and following the completion of the 1-RM tests. Although the self-presentational efficacy manipulation was not successful, the trainers were perceived significantly differently on musculature and expertise. The group with the muscular, expert trainer reported higher social anxiety and attained higher 1-RM scores for the chest and leg press. Thus, trainer characteristics can affect strength performance and self-presentational concerns in this population.