930 resultados para operative technique
Resumo:
With the increase of use of digital media the need for the methods of multimedia protection becomes extremely important. The number of the solutions to the problem from encryption to watermarking is large and is growing every year. In this work digital image watermarking is considered, specifically a novel method of digital watermarking of color and spectral images. An overview of existing methods watermarking of color and grayscale images is given in the paper. Methods using independent component analysis (ICA) for detection and the ones using discrete wavelet transform (DWT) and discrete cosine transform (DCT) are considered in more detail. A novel method of watermarking proposed in this paper allows embedding of a color or spectral watermark image into color or spectral image consequently and successful extraction of the watermark out of the resultant watermarked image. A number of experiments have been performed on the quality of extraction depending on the parameters of the embedding procedure. Another set of experiments included the test of the robustness of the algorithm proposed. Three techniques have been chosen for that purpose: median filter, low-pass filter (LPF) and discrete cosine transform (DCT), which are a part of a widely known StirMark - Image Watermarking Robustness Test. The study shows that the proposed watermarking technique is fragile, i.e. watermark is altered by simple image processing operations. Moreover, we have found that the contents of the image to be watermarked do not affect the quality of the extraction. Mixing coefficients, that determine the amount of the key and watermark image in the result, should not exceed 1% of the original. The algorithm proposed has proven to be successful in the task of watermark embedding and extraction.
Resumo:
The objective of this work was to evaluate the feasibility of vegetative propagation through cutting technique of seven tree species with strong occurrence in the riparian forest of the Lower São Francisco River in Sergipe State, under different concentrations of indolbutiric acid at 0, 2500, and 5000 mg.L-1, for potentialization of its use in soil bioengineering technique. It was used a complete random block design with three replicates, and a total of twenty-one treatments. The evaluation period was 120 days for each species, and the data collection was made in intervals of fifteen days, in a total of eight evaluations for each species. The evaluated parameters were: Survival Rate, callus formation, and Root Dry matter Weight. Among the studied species, Schinus terebinthifolius Raddi presented the best results related to cutting technique mainly under the indolbutiric acid concentration of 2500 mg.L-1.
Resumo:
The purpose of this study was to simulate and to optimize integrated gasification for combine cycle (IGCC) for power generation and hydrogen (H2) production by using low grade Thar lignite coal and cotton stalk. Lignite coal is abundant of moisture and ash content, the idea of addition of cotton stalk is to increase the mass of combustible material per mass of feed use for the process, to reduce the consumption of coal and to increase the cotton stalk efficiently for IGCC process. Aspen plus software is used to simulate the process with different mass ratios of coal to cotton stalk and for optimization: process efficiencies, net power generation and H2 production etc. are considered while environmental hazard emissions are optimized to acceptance level. With the addition of cotton stalk in feed, process efficiencies started to decline along with the net power production. But for H2 production, it gave positive result at start but after 40% cotton stalk addition, H2 production also started to decline. It also affects negatively on environmental hazard emissions and mass of emissions/ net power production increases linearly with the addition of cotton stalk in feed mixture. In summation with the addition of cotton stalk, overall affects seemed to negative. But the effect is more negative after 40% cotton stalk addition so it is concluded that to get maximum process efficiencies and high production less amount of cotton stalk addition in feed is preferable and the maximum level of addition is estimated to 40%. Gasification temperature should keep lower around 1140 °C and prefer technique for studied feed in IGCC is fluidized bed (ash in dry form) rather than ash slagging gasifier
Resumo:
The concern related to environment is growing. Due to this, it is needed to determine chemical elements in a large range of concentration. The neutron activation technique (NAA) determines the elemental composition by the measurement of artificial radioactivity in a sample that was submitted to a neutron flux. NAA is a sensitive and accurate technique with low detection limits. An example of application of NAA was the measurement of concentrations of rare earth elements (REE) in waste samples of phosphogypsum (PG) and cerrado soil samples (clayey and sandy soils). Additionally, a soil reference material of the International Atomic Energy Agency (IAEA) was also analyzed. The REE concentration in PG samples was two times higher than those found in national fertilizers, (total of 4,000 mg kg-1 ), 154 times greater than the values found in the sandy soil (26 mg kg-1 ) and 14 times greater than the in clayey soil (280 mg kg-1 ). The experimental results for the reference material were inside the uncertainty of the certified values pointing out the accuracy of the method (95%). The determination of La, Ce, Pr, Nd, Pm, Sm, Eu, Tb, Dy, Ho, Er, Tm, Yb and Lu in the samples and reference material confirmed the versatility of the technique on REE determination in soil and phosphogypsum samples that are matrices for agricultural interest.
Resumo:
Scarcity of long-term series of sediment-related variables has led watershed managers to apply mathematical models to simulate sediment fluxes. Due to the high efforts for installation and maintenance of sedimentological gauges, tracers have been pointed out as an alternative to validate soil redistribution modelling. In this study, the 137Cs technique was used to assess the WASA-SED model performance at the Benguê watershed (933 km²), in the Brazilian semiarid. Qualitatively, good agreement was found among the 137Cs technique and the WASA-SED model results. Nonetheless, quantitatively great differences, up to two orders of magnitude, were found between the two methods. Among the uncertainties inherent to the 137Cs technique, definition of the reference inventory seems to be a major source of imprecision. In addition, estimations of water and sediment fluxes with mathematical models usually also present high uncertainty, contributing to the quantitative differences of the soil redistribution estimates with the two methods.
Resumo:
A case of gastrocolic fistula(GCF) in a patient with duodenal stenosis who had previously undergone gastroenteric anastomosis is reported. The patient went through hemigastrectomy, partial colectomy and segmental enterectomy with bloc resection. Reconstruction was carried out through Billroth II gastrojejunostomy, jejunojejunostomy and end-to-end anastomosis of the colon. The patient had good post-operative evolution and was discharged from hospital seven days after surgery. GCF should be suspected in patients presenting weight loss, diarrhea and fecal vomiting, mainly with history of peptic ulcer surgery, gastric or colonic malignancy and use of steroidal and nonsteroidal antiinflamatory drugs. Barium enema is the choice test for diagnosis, however, the benign or malignant nature of the lesion should always be evaluated through high digestive endoscopy. Clinical treatment with oral H2-antagonists and discontinuing ulcerogenic medications might be indicated in some cases; surgical treatment is indicated in cases of malignant disease and might be indicated in cases of peptic disease as it treats GCF and also the baseline disease. Some advise upwards colostomy at first. The most used technique is bloc resection, including the fistulous tract, hemigastrectomy and partial colectomy. Gastrectomy, fistulous tract excision and colon suturing may be performed in some cases. The mortality rate is related to metabolic disorders and the recurrence with the use of antiinflammatory drugs.
Resumo:
Laparoscopic techniques have provided a new dimension to correct functional disorders of the esophagus, which has stimulated some investigators to recently report the use of laparoscopic cardiomyotomy in the treatment of esophageal achalasia. Now, a new instrument has been added to the current laparoscopic technique to offer a safer and easier method to proceed complete myotomy. After the dissection of the esophagogastric junction, a special catheter is introduced reaching the stomach. lt has an illuminated 10 cm extremity connected to a light source. lts withdrawal allows to visualize every muscle circular fiber by transillumination withan improved view provide by the laparoscopic optic system lens. This condition modifies the operative surgeon s attitude offering a better controlled situation over the procedure. The use of transillumination o fthe esophagogastric junction provides a good identification of the mucosa e submucosa avoiding the risk of esophageal perforation. It also helps to perform a complete myotomy preventing the ocurrence of persistent disphagia in the postoperative period. Cardiomyotomy with parcial fundoplication is possible by videolaparoscopic approach, now made easier with transillumination. This technique is safe and the functional results are similar to those observed in the literature for conventional open procedures, with the obvious advantages of the minimally invasive approach.
Resumo:
The objective of this master’s thesis is to investigate the loss behavior of three-level ANPC inverter and compare it with conventional NPC inverter. The both inverters are controlled with mature space vector modulation strategy. In order to provide the comparison both accurate and detailed enough NPC and ANPC simulation models should be obtained. The similar control model of SVM is utilized for both NPC and ANPC inverter models. The principles of control algorithms, the structure and description of models are clarified. The power loss calculation model is based on practical calculation approaches with certain assumptions. The comparison between NPC and ANPC topologies is presented based on results obtained for each semiconductor device, their switching and conduction losses and efficiency of the inverters. Alternative switching states of ANPC topology allow distributing losses among the switches more evenly, than in NPC inverter. Obviously, the losses of a switching device depend on its position in the topology. Losses distribution among the components in ANPC topology allows reducing the stress on certain switches, thus losses are equally distributed among the semiconductors, however the efficiency of the inverters is the same. As a new contribution to earlier studies, the obtained models of SVM control, NPC and ANPC inverters have been built. Thus, this thesis can be used in further more complicated modelling of full-power converters for modern multi-megawatt wind energy conversion systems.
Resumo:
BACKGROUND: Liver vascular isolation is essential for the treatment of the retrohepatic vena cava and hepatic veins. Triple vessel occlusion (TVO - occlusion of the portal triad, the inferior vena cava above the renal veins and within the pericardium) is the easiest isolation method for the surgeon. Unfortunately, this technique cannot be applied to hypovolemic and/or shock (cardiac arrest) patients as it compromises venous return. OBJECTIVES: Our objective is to demonstrate that in the above mentioned patients, establishing a previous hypervolemic state allows the safe use of TVO. METHODS: The method includes efficient injury tamponade with aggressive fluid replacement until normal blood volume is reached (resuscitation). Normal blood volume is recognized by a return of arterial blood pressure to normal levels, inferior vena cava filling and an increase in aortic wall tension. Following this procedure, hypervolemia is obtained by the rapid additional infusion of 1.500 to 2.000 ml of fluids. TVO in this situation does not alter the heart rhythm and maintains a clear operative field which is essential for hepatotomy, venorrhaphy and or venous ligation. RESULTS: Three patients were successfully operated.
Resumo:
Videolaparoscopic surgery has been used for treatment of almost all surgical abdominal diseases, mainly where there are no large ressections, or operative field is limited. In these situations, laparoscopic surgery has the advantages of less morbidity, quick recovery and good cosmetic results. Bezoars removal, or its mobilization, is probably included in these possible proceedings. Three non-laparotomic procedures were described: 1. endoscopic-laparoscopic; 2. videolaparoscopy and mobilization of intestinal bezoar to the cecum; 3. laparoscopy and gastrotomy for bezoar removal, through suprapubic incision or the umbilical punction. There have been only two publications describing the videolaparoscopic method for bezoar removal, and the methods applied can be complications or morbidity related. We describe one case where the applied technique is simple and easy to perform, time saving and probably less complications-related. This technique, with four trocars, utilized a plastic bag besides the stomach to be opened, followed by gastrotomy, bezoar removal and immediate introduction in the plastic bag, suture of gastrotomy and removal through the left subcostal trocar. This technique was feasible and easy to perform, with short operative time, and there were no intra or post-operative complications; the patient was discharged in the second post-operative day, and is without further problems after one year follow-up. We believe that this could be an adequate technique to perform laparoscopic gastric bezoar removal, and the rigid sequence of operative events allows a quick procedure, with minimal contamination. The videolaparoscopy seems to be an adequate access to surgical treatment of gastro-intestinal bezoars, with or without obstruction, and should be the ellected the procedure of choice to begin the surgical treatment, with convertion to laparotomy in case of any intra-operative adversity.
Resumo:
In some cases of esophageal reconstruction, it is not possible to use the gastric tube. In those cases, the second option is the reconstruction with a colonic segment. In the present paper, the authors present the use of microsurgical technique to improve vascular supply in esophageal reconstructions using the colon. Therefore, the transposed segment becomes perfused by two vascular pedicles: a proximal one and a distal one. The authors describe a case of 52 years-old patient, suffering of middle third esophagus carcinoma, who underwent a primarily esophageal resection with an unsuccessful reconstruction using gastric transposition. A new reconstruction was proposed using a bipedicle microcirurgical colonic tube, four months later. The post operative was uneventful with rehabilitation of swallowing and satisfactory recovery of nutritional state.
Resumo:
Chondrosarcoma is a rare malignant neoplasia that most of the time affects young adults. Its location is preferentially the pelvic and scapular girdle and surgery is its treatment of choice. There are no role for chemo or radiation therapy, because of their low index of response. We describe a case of a 45 year-old male patient with an extensive low grade right umerus chondrosarcoma. In spite of the local extension, there was no invasion of the shoulder neurovascular structures. Treatment proposed was the Tikhoff-Linberg procedure, and the operation was performed with success, with no complications. Free margins were obtained. The patient is now on two years follow-up with no evidence of recurrent disease and is able to drive, fish and carry packs. He can not abduct his arm, but he could not do that even before surgery, due to severe pain. We believe this is an excellent conservative approach to such tumors, that otherwise would require a forequarter amputation, and strongly recommend the technique.
Resumo:
The pectus excavatum treatment has two different approaches: non-surgical techniques (modified dynamic thoracic compressor, exercises and the vacuum bell) or surgical techniques (silastic or solid silicone implant, open surgical repair like sternochondroplasty and minimally invasive repair). The introduction of Nuss procedure improved the pectus excavatum treatment, but its low acceptance was due to the high complication rate (e.g. cardiac perfuration). The thoracoscopy use for bar mediastinal passage reduced the complication rate. In comparison with sternochondroplasty, the Nuss procedure has smaller incision, less blood loss and less operative time. However, it has more reoperations, complications, longer hospital stay and more readmission rates, more time of thoracic epidural catheter for postoperative analgesia and more need for analgesic after being discharged. Although Nuss procedure has been used in children, patients under ten years must be only observed. The Nuss procedure is applicable to moderate or light symmetrical pectus excavatum, without costal protrusion, in young and adolescents patients. Furthermore, the sternochondroplasty is applicable to severe or asymmetric pectus excavatum, with or without inferior costal protrusion. Therefore, Nuss procedure and sternocondroplasty are not antagonistic procedures, and they must be used in accordance with a treatment organogram and the technique choice must be by functional and aesthetic outcome.
Resumo:
The objective of this thesis is the development of a multibody dynamic model matching the observed movements of the lower limb of a skier performing the skating technique in cross-country style. During the construction of this model, the formulation of the equation of motion was made using the Euler - Lagrange approach with multipliers applied to a multibody system in three dimensions. The description of the lower limb of the skate skier and the ski was completed by employing three bodies, one representing the ski, and two representing the natural movements of the leg of the skier. The resultant system has 13 joint constraints due to the interconnection of the bodies, and four prescribed kinematic constraints to account for the movements of the leg, leaving the amount of degrees of freedom equal to one. The push-off force exerted by the skate skier was taken directly from measurements made on-site in the ski tunnel at the Vuokatti facilities (Finland) and was input into the model as a continuous function. Then, the resultant velocities and movement of the ski, center of mass of the skier, and variation of the skating angle were studied to understand the response of the model to the variation of important parameters of the skate technique. This allowed a comparison of the model results with the real movement of the skier. Further developments can be made to this model to better approximate the results to the real movement of the leg. One can achieve this by changing the constraints to include the behavior of the real leg joints and muscle actuation. As mentioned in the introduction of this thesis, a multibody dynamic model can be used to provide relevant information to ski designers and to obtain optimized results of the given variables, which athletes can use to improve their performance.