The history and fishery potential of Kisoro Minor Lakes part two: Preliminary survey of Lakes Mutanda and Mulehe fisheries 

The fisheries of Lakes Mutanda and Mulehe during 1998/9 were mainly at subsistence scale and only few fishers operated at irregular intervals. The commercial catch records between 1963 to 1999 showed that Lake Mulehe was landing more fish than Lake Mutanda despite the fact that Lake Mutanda (26.4 km2) was bigger than Lake Mulehe (4.11 cm2). The constant decline of catches was due to irregular restocking and applying low stocking densities of fry. However, restocking should consider using species that withstand low temperature (15-240C) in the district. These include Oreochromis niloticus (Nile tilapia), Macropterus salmoides (Black bass), and Cyprinus carpio (Common carp). Most of these species have either disappeared or declined to very low levels. Due to lack of commercial fish species for harvest, the fishers by 1998/9 resorted to harvesting the haplochromines, Clarias carsoni and edible frogs (Xenopus kigesiensis) as alternative resources. Experimental studies have shown the need and techniques to enhance fish production on these two lakes.

Characterization of the fisheries of the major and minor lakes of Uganda and the socio-economic factors influencing fishery exploitation

There is growing recognition that the performance of the fisheries sector depends on the communities responsible for activities within it. These communities include fishers, processors, fish mongers, traders, local leaders, fishery administrators etc. On the basis of this, characterisation and diagnostic studies were conducted in 1995 focussing on mainly the fishers and opinion leaders on the major and some minor water bodies in Uganda. The study revealed that the desire to earn income is the driving force behind the malfishing practices experienced on Uganda fisheries. The destructive fishing gears and fishing methods as responses advanced by the fishers and opinion leaders were seines and cast nets on lakes Victoria, Kyoga and Albert and to a less extent traps

Fishery and biology of Penaeid prawns at Harnaii, Mahatashtra

Penaeid prawn fishery at Harnaii in Ratnagiri District of Maharashtra was investigated during fishing seasons of 2002-03 and 2003-04 from mechanized (MLD) and hand operated trawlers (HT). During the two years, MLD contributed 86% and HT 14% to the average annual penaeid prawn catch of 2,242 t. The catch showed two peaks, a major during October-December and a minor during April-May in both the gears but abundance of the individual species differed. P. stylifera, Metapenaeopsis affinis, Solenocera crassicornis, Metapenaeopsis brevicornis, P. merguiensis and Metapenaeopsis dobsoni mainly constituted the fishery and their species composition, seasonal abundance, annual size distribution and monthly mean size were investigated. Biological studies on food, size at maturity, spawning period, sex-ratio and juvenile abundance were carried out to explain temporal abundance of the species in the fishery. Among the species P. stylifera, M. affinis and S. crassicornis exhibited distinct seasonality with two spawning peaks, one in pre-monsoon and the other in post monsoon period to produce two discrete broods while P. merguiensis despite two spawning peaks exhibited a single dominant brood. M. brevicornis showed monsoon and post-monsoon spawning while M. dobsoni showed only post-monsoon spawning. Migrations between nearshore and offshore waters resulted in mixing of the broods and they remained inseparable in the catch.

Individual grain boundary properties and overall performance of metal-organic-deposition coated conductors

We have investigated single grain boundaries (GBs) isolated in coated conductors produced by Metal-Organic Deposition (MOD). When a magnetic field is swept in the film plane, an angle-dependent crossover from boundary to grain limited critical current density Jc is found. In the force-free orientation, even at fields as high as 8 T, the GBs still limit Jc. We deduce that this effect is a direct consequence of GB meandering. We have employed these single GB results to explain the dependence of Jc of polycrystalline tracks on their width: in-plane measurements become flatter as the tracks are narrowed down. This result is consistent with the stronger GB limitation at field configurations close to force-free found from the isolated boundaries. Our study shows that for certain geometries even at high fields the effect of GBs cannot be neglected.

Physical, chemical, algal composition and primary production in the four Kisoro minor lakes

The study was conducted between 1998 and 1999. Physical, chemical and biological factors of the water quality characteristics were collected and analysed

The fishery potential of the minor lake (Nabisojjo) - Luwero District

Luwero district before the creation of Nakasongola District had a share of south-western portion of Lake Kyoga. After loosing the portion of the lake, they want to resort the minor lake (Nabisojjo) for supply of fish at least to the population around this lake. The plans were to start commercial fishing. The lake is 45 km from Luwero town adjacent 10 the road going to Ngoma town. River Nabisojjo, a tribulary of river Mayanja flows through the lake on its way to river Kafu. The main objective of the scientific field study on Lake Nabisojjo was therefore to generate information on the status of the lake fishery and recommend to the local authorities the next line of action.

Market opportunity identification for minor crops for food security through value chain studies

The brochure is to contribute to the overall goal of stimulating the adaptation of pro-poor agri-food systems innovations to improve food security and sustainable natural resource management among rural poor farmers. The paper seeks to identify and exploit opportunities for expanding market access for minor crops and NRM products. The minor crops studied included cow pea, sorghum, groundnut, sweet potato and yam.

Solving problems in production scheduling

Traditionally, production scheduling has been viewed as a problem-solving task that involves a single problem - generation of a suitable schedule. This paper presents an alternative model in which individual difficulties are viewed as problems, and the task is to maintain a suitable schedule by resolving as many of these problems as possible. Decision support software is described that has facilities for defining policies to handle numerous minor problems and complete problem-solving strategies to deal with major problems. The paper then discusses the potential for this style of decision support to improve the performance of human schedulers. © 1995.

Phototransistors utilizing individual WS2 nanotubes

We report on the photoresponse characteristics of tungsten disulfide (WS2) nanotubes. Field effect transistors (FETs) were fabricated by using individual WS2 multiwall nanotubes. Photo-sensitivity to visible light is clearly observed, with enhancement of the channel conductivity, carrier mobility and carrier concentration upon illumination in the visible regime. Polarization-sensitive measurements reveal a strong anisotropy of the photocurrent on the polarization angle of the incident light with respect to the WS2 nanotube axis. This nano-scale transistor capable of detecting visible light would have a wide range of applications in medical and consumer electronics. © 2008 IEEE. Crown Copyright.

The horizontal response of framed buildings on individual footings to excavation-induced movements

Deep excavations and tunnelling can cause ground movements that affect buildings within their influence zone. The current approach for building damage assessment is based on tensile strains estimated from the deflection ratio and the horizontal strains at the building foundation. This paper examines the significance of horizontal strains in buildings on individual footings. The first part of the paper presents a case study of a framed building in Singapore which was subjected to the effects of bored tunnelling, where significant horizontal strains were observed. The second part of the paper suggests a method to relate the horizontal strains induced in a building to the stiffness of the frame structure. Using a combination of simplified structural analysis and finite element models, design guidance is proposed to estimate excavation-induced horizontal strains in frame buildings on individual footings. © 2012 Taylor & Francis Group.

Self-similar organization of arrays of individual carbon nanotubes and carbon nanotube micropillars

It is well-known that carbon nanotube (CNT) growth from a dense arrangement of catalyst nanoparticles creates a vertically aligned CNT forest. CNT forests offer attractive anisotropic mechanical, thermal, and electrical properties, and their anisotropic structure is enabled by the self-organization of a large number of CNTs. This process is governed by individual CNT diameter, spacing, and the CNT-to-CNT interaction. However, little information is known about the self-organization of CNTs within a forest. Insight into the self-organization is, however, essential for tailoring the properties of the CNT forests for applications such as electrical interconnects, thermal interfaces, dry adhesives and energy storage. We demonstrate that arrays of CNT micropillars having micron-scale diameters organize in a similar manner as individual CNTs within a forest. For example, as previously demonstrated for individual CNTs within a forest, entanglement of small-diameter CNT micropillars during the initial stage of growth creates a film of entwined pillars. This layer enables coordinated subsequent growth of the pillars in the vertical direction, in a case where isolated pillars would not grow in a self-supporting fashion. Finally, we provide a detailed overview of the self-organization as a function of the diameter, length and spacing of the CNT pillars. This study, which is applicable to many one-dimensional nanostructured films, demonstrates guidelines for tailoring the self-organization which can enable control of the collective mechanical, electrical and interfacial properties of the films. © 2009 Elsevier B.V. All rights reserved.