Mass spectrometry-based metabolomics applied to the chemical safety of food

Mass spectrometry (MS)-based metabolomics is emerging as an important field of research in many scientific areas, including chemical safety of food. A particular strength of this approach is its potential to reveal some physiological effects induced by complex mixtures of chemicals present at trace concentrations. The limitations of other analytical approaches currently employed to detect low-dose and mixture effects of chemicals make detection very problematic. Besides this basic technical challenge, numerous analytical choices have to be made at each step of a metabolomics study, and each step can have a direct impact on the final results obtained and their interpretation (i.e. sample preparation, sample introduction, ionization, signal acquisition, data processing, and data analysis). As the application of metabolomics to chemical analysis of food is still in its infancy, no consensus has yet been reached on defining many of these important parameters. In this context, the aim of the present study is to review all these aspects of MS-based approaches to metabolomics, and to give a comprehensive, critical overview of the current state of the art, possible pitfalls, and future challenges and trends linked to this emerging field. (C) 2010 Elsevier Ltd. All rights reserved.

Absorbing new knowledge in small and medium-sized enterprises: A multiple case analysis of Six Sigma

The primary aim of this article is to critically analyse the development of Six Sigma theory and practice within small and medium-sized enterprises (SMEs) using a multiple case study approach. The article also explores the subsequent development of Lean Six Sigma as a means of addressing the perceived limitations of the efficacy of Six Sigma in this context. The overarching theoretical framework is that of absorptive capacity, where Six Sigma is conceptualized as new knowledge to be absorbed by smaller firms. The findings from a multiple case study involving repeat interviews and focus groups informed the development of an analytical model demonstrating the dynamic underlying routines for the absorptive capacity process and the development of a number of summative propositions relating the characteristics of SMEs to Six Sigma and Lean Six Sigma implementation.

Assessing the Impact of Technology on Aircraft Systems using Technology Impact Forecasting

In today’s atmosphere of constrained defense spending and reduced research budgets, determining how to allocate resources for research and design has become a critical and challenging task. In the area of aircraft design there are many promising technologies to be explored, yet limited funds with which to explore them. In addition, issues concerning uncertainty in technology readiness as well as the quantification of the impact of a technology (or combinations of technologies), are of key importance during the design process. This paper presents a methodology that details a comprehensive and structured process in which to quantitatively explore the effects of technology for a given baseline aircraft. This process, called Technology Impact Forecasting (TIF), involves the creation of a assessment environment for use in conjunction with defined technology scenarios, and will have a significant impact on resource allocation strategies for defense acquisition. The advantages and limitations of the method are discussed. In addition, an example TIF application, that of an Uninhabited Combat Aerial Vehicle, is presented and serves to illustrate the applicability of this methodology to a military system.

The renin-angiotensin system and antihypertensive drugs in Alzheimer's disease:current standing of the angiotensin hypothesis?

There is an urgent need to improve upon Alzheimer's disease (AD) treatments. Limitations of existing drugs are that they target specific downstream neurochemical abnormalities while the upstream underlying pathology continues unchecked. Preferable treatments would be those that can target a number of the broad range of molecular and cellular abnormalities that occur in AD such as amyloid-ß (Aß) and hyperphosphorylated tau-mediated damage, inflammation, and mitochondrial dysfunction, as well more systemic abnormalities such as brain atrophy, impaired cerebral blood flow (CBF), and cerebrovascular disease. Recent pre-clinical, epidemiological, and a limited number of clinical investigations have shown that prevention of the signaling of the multifunctional and potent vasoconstrictor angiotensin II (Ang II) may offer broad benefits in AD. In addition to helping to ameliorate co-morbid hypertension, these drugs also likely improve diminished CBF which is common in AD and can contribute to focal Aß pathology. These drugs, angiotensin converting enzyme (ACE) inhibitors, or angiotensin receptor antagonists (ARAs) may also help deteriorating cognitive function by preventing Ang II-mediated inhibition of acetylcholine release as well as interrupt the upregulation of deleterious inflammatory pathways that are widely recognized in AD. Given the current urgency to find better treatments for AD and the relatively immediate availability of drugs that are already widely prescribed for the treatment of hypertension, one of the largest modifiable risk factors for AD, this article reviews current knowledge as to the eligibility of ACE-inhibitors and ARAs for consideration in future clinical trials in AD.

Improving molecular detection of Candida DNA in whole blood:comparison of seven fungal DNA extraction protocols using real-time PCR

The limitations of classical diagnostic methods for invasive Candida infections have led to the development of molecular techniques such as real-time PCR to improve diagnosis. However, the detection of low titres of Candida DNA in blood from patients with candidaemia requires the use of extraction methods that efficiently lyse yeast cells and recover small amounts of DNA suitable for amplification. In this study, a Candida-specific real-time PCR assay was used to detect Candida albicans DNA in inoculated whole blood specimens extracted using seven different extraction protocols. The yield and quality of total nucleic acids were estimated using UV absorbance, and specific recovery of C. albicans genomic DNA was estimated quantitatively in comparison with a reference (Qiagen kit/lyticase) method currently in use in our laboratory. The extraction protocols were also compared with respect to sensitivity, cost and time required for completion. The TaqMan PCR assay used to amplify the DNA extracts achieved high levels of specificity, sensitivity and reproducibility. Of the seven extraction protocols evaluated, only the MasterPure yeast DNA extraction reagent kit gave significantly higher total nucleic acid yields than the reference method, although nucleic acid purity was highest using either the reference or YeaStar genomic DNA kit methods. More importantly, the YeaStar method enabled C. albicans DNA to be detected with highest sensitivity over the entire range of copy numbers evaluated, and appears to be an optimal method for extracting Candida DNA from whole blood.

Efficient modelling and optimisation of hybrid multilayered plates subject to ballistic impact

Among the key challenges present in the modelling and optimisation of composite structures against impact is the computational expense involved in setting up accurate simulations of the impact event and then performing the iterations required to optimise the designs. It is of more interest to find good designs given the limitations of the resources and time available rather than the best possible design. In this paper, low cost but sufficiently accurate finite element (FE) models were generated in LS Dyna for several experimentally characterised materials by semi-automating the modelling process and using existing material models. These models were then used by an optimisation algorithm to generate new hybrid offspring, leading to minimum weight and/or cost designs from a selection of isotropic metals, polymers and orthotropic fibre-reinforced laminates that countered a specified impact threat. Experimental validation of the optimal designs thus identified was then successfully carried out using a single stage gas gun. With sufficient computational hardware, the techniques developed in this pilot study can further utilise fine meshes, equations of state and sophisticated material models, so that optimal hybrid systems can be identified from a wide range of materials, designs and threats.

Understanding the socio-economic distribution of multiple deprivation: An application of self-organising maps

In this paper we seek to contribute to recent efforts to develop and implement multi-dimensional approaches to social exclusion by applying self-organising maps (SOMs) to a set of material deprivation indicators from the Irish component of EU-SILC. The first stage of our analysis involves the identification of sixteen clusters that confirm the multi-dimensional nature of deprivation in contemporary Ireland and the limitations of focusing solely on income. In going beyond this mapping stage, we consider both patterns of socio-economic differentiation in relation to cluster membership and the extent to which such membership contributes to our understanding of economic stress. Our analysis makes clear the continuing importance of traditional forms of stratification relating to factors such as income, social class and housing tenure in accounting for patterns of multiple deprivation. However, it also confirms the role of acute life events and life cycle and location influences. Most importantly, it demonstrates that conclusions relating to the relative impact of different kinds of socio-economic influences are highly dependent on the form of deprivation being considered. Our analysis suggests that debates relating to the extent to which poverty and social exclusion have become individualized should take particular care to distinguish between different kinds of outcomes. Further analysis demonstrates that the SOM approach is considerably more successful than a comparable latent class analysis in identifying those exposed to subjective economic stress. (C) 2010 International Sociological Association Research Committee 28 on Social Stratification and Mobility. Published by Elsevier Ltd. All rights reserved.

Explaining levels of deprivation in the European Union

In this paper we seek to explain variations in levels of deprivation between EU countries. The starting-point of our analysis is the finding that the relationship between income and life-style deprivation varies across countries. Given our understanding of the manner in which the income-deprivation mismatch may arise from the limitations of current income as a measure of command over resources, the pattern of variation seems to be consistent with our expectations of the variable degree to which welfare-state regimes achieve 'decommodification' and smooth income flows. This line of reasoning suggests that cross-national differences in deprivation might, in significant part, be due not only to variation in household and individual characteristics that are associated with disadvantage but also to the differential impact of such variables across countries and indeed welfare regimes. To test this hypothesis, we have taken advantage of the ECHP (European Community Household Panel) comparative data set in order to pursue a strategy of substituting variable names for country/welfare regime names. We operated with two broad categories of variables, tapping, respectively, needs and resources. Although both sets of factors contribute independently to our ability to predict deprivation, it is the resource factors that are crucial in reducing country effects. The extent of cross-national heterogeneity depends on specifying the social class and situation in relation to long-term unemployment of the household reference person. The impact of the structural socio-economic variables that we label 'resource factors' varies across countries in a manner that is broadly consistent with welfare regime theory and is the key factor in explaining cross-country differences in deprivation. As a consequence, European homogeneity is a great deal more evident among the advantaged than the disadvantaged.

3-D micromechanical model for predicting the elastic behaviour of woven laminates

This paper presents an analytical model for the prediction of the elastic behaviour of plain-weave fabric composites. The fabric is a hybrid plain-weave with different materials and undulations in the warp and weft directions. The derivation of the effective material properties is based on classical laminate theory (CLT).

The theoretical predictions have been compared with experimental results and predictions using alternative models available in the literature. Composite laminates were manufactured using the resin infusion under flexible tooling (RIFT) process and tested under tension and in-plane shear loading to validate the model. A good correlation between theoretical and experimental results for the prediction of in-plane properties was obtained. The limitations of the existing theoretical models based on classical laminate theory (CLT) for predicting the out-of-plane mechanical properties are presented and discussed. 

Exploratory Space-Time Analyses of Rift Valley Fever in South Africa in 2008-2011

Background: Rift Valley fever (RVF) is a zoonotic arbovirosis for which the primary hosts are domestic livestock (cattle, sheep and goats). RVF was first described in South Africa in 1950-1951. Mechanisms for short and long distance transmission have been hypothesised, but there is little supporting evidence. Here we describe RVF occurrence and spatial distribution in South Africa in 2008-11, and investigate the presence of a contagious process in order to generate hypotheses on the different mechanisms of transmission. Methodology/Principal Findings: A total of 658 cases were extracted from World Animal Health Information Database. Descriptive statistics, epidemic curves and maps were produced. The space-time K-function was used to test for evidence of space-time interaction. Five RVF outbreak waves (one in 2008, two in 2009, one in 2010 and one in 2011) of varying duration, location and size were reported. About 70% of cases (n = 471) occurred in 2010, when the epidemic was almost country-wide. No strong evidence of space-time interaction was found for 2008 or the second wave in 2009. In the first wave of 2009, a significant space-time interaction was detected for up to one month and over 40 km. In 2010 and 2011 a significant intense, short and localised space-time interaction (up to 3 days and 15 km) was detected, followed by one of lower intensity (up to 2 weeks and 35 to 90 km). Conclusions/Significance: The description of the spatiotemporal patterns of RVF in South Africa between 2008 and 2011 supports the hypothesis that during an epidemic, disease spread may be supported by factors other than active vector dispersal. Limitations of under-reporting and space-time K-function properties are discussed. Further spatial analyses and data are required to explain factors and mechanisms driving RVF spread. © 2012 Métras et al.

Modelling the chromosphere and transition region of ε Eri (K2 V)

Measurements of ultraviolet line fluxes from Space Telescope Imaging Spectrograph and Far-Ultraviolet Spectroscopic Explorer spectra of the K2-dwarf e Eri are reported. These are used to develop new emission measure distributions and semi-empirical atmospheric models for the chromosphere and lower transition region of the star. These models are the most detailed constructed to date for a main-sequence star other than the Sun. New ionization balance calculations, which account for the effect of finite density on dielectronic recombination rates, are presented for carbon, nitrogen, oxygen and silicon. The results of these calculations are significantly different from the standard Arnaud & Rothenflug ion balance, particularly for alkali-like ions. The new atmospheric models are used to place constraints on possible first ionization potential (FIP)-related abundance variations in the lower atmosphere and to discuss limitations of single-component models for the interpretation of certain optically thick line fluxes. © 2005 RAS.

Modelling the X-ray spectra of high-velocity outflows from quasars

High-velocity outflows from supermassive black holes have been invoked to explain the recent identification of strong absorption features in the hard X-ray spectra of several quasars. Here, Monte Carlo radiative transfer calculations are performed to synthesize X-ray spectra from models of such flows. It is found that simple, parametric biconical outflow models with plausible choices for the wind parameters predict spectra that are in good qualitative agreement with observations in the 2-10 keV band. The influence on the spectrum of both the mass-loss rate and opening angle of the flow are considered: the latter is important since photon leakage plays a significant role in establishing an ionization gradient within the flow, a useful discriminant between spherical and conical outflow for this and other applications. Particular attention is given to the bright quasar PG 1211+143 for which constraints on the outflow geometry and mass-loss rate are discussed subject to the limitations of the currently available observational data.

DONUTS: A Science Frame Autoguiding Algorithm with Sub-Pixel Precision, Capable of Guiding on Defocused Stars

We present the DONUTS autoguiding algorithm, designed to fix stellar positions at the sub-pixel level for high-cadence time-series photometry, and also capable of autoguiding on defocused stars. DONUTS was designed to calculate guide corrections from a series of science images and recentre telescope pointing between each exposure. The algorithm has the unique ability of calculating guide corrections from undersampled to heavily defocused point spread functions. We present the case for why such an algorithm is important for high precision photometry and give our results from off and on-sky testing. We discuss the limitations of DONUTS and the facilities where it soon will be deployed.

Psychic Distance, its Business Impact and Modes of Coping: A Study of British and Indian Partner SMEs

This paper reports one of the first investigations to analyze inter-partner perceptions of psychic distance between two countries. Its empirical focus is British and Indian SMEs engaged in business with each other. It examines different dimensions of psychic distance, their impact and modes of coping with them. Potential firm-level and individual influences are also taken into account. The paper aims to transcend some of the conceptual and methodological limitations of previous research on the subject and to identify the theoretical and practical implications that arise. A ‘mirror’ approach is applied, accessing both partners’ perceptions. These are assessed through a ‘mixed’ method combining quantitative measurement with qualitative interpretations. Psychic distance dimensions are found to vary in their impact on doing business with the other country, and there is also variation according to the firm’s sector. There is considerable asymmetry in British and Indian partners’ perceptions of psychic distance but the degree of difference between their psychic distance evaluations lacks predictive power. Culturally embedded psychic distance dimensions tend to have less impact and to be easier to cope with than institutionally embedded dimensions. Four categories of coping are identified. The principal theoretical implication of this study is that a contingency perspective needs to be adopted in the field of ‘distance’ research, taking account of factors such as a firm’s sector, and that this will require a more complex analytical framework that hitherto.

Chemometric techniques in multivariate statistical modelling of process plant

The techniques of principal component analysis (PCA) and partial least squares (PLS) are introduced from the point of view of providing a multivariate statistical method for modelling process plants. The advantages and limitations of PCA and PLS are discussed from the perspective of the type of data and problems that might be encountered in this application area. These concepts are exemplified by two case studies dealing first with data from a continuous stirred tank reactor (CSTR) simulation and second a literature source describing a low-density polyethylene (LDPE) reactor simulation.