Estudo da incorporação da cal em composições binárias de solo-cimento para produção de tijolos maciços

The use of binders in the soil for the production of solid bricks is an old construction technique that has been used by several civilizations over time. At the same time, the need for environmental preservation and the tendency of scarcity of natural resources make the construction invest in researching new concepts, methods and materials for building systems for the sustainability of their economic activities. Thus arises the need to obtain building materials with low power consumption, capable of reducing the growing housing shortage of rural and urban population. Currently, research has been conducted on this topic to better understand the cementitious and pozzolanic reactions that occur in the formation of the microstructure of the soil-cement when added to other materials such as, for example, lime, and the relationship between microstructure and formed interfaces with the physical, mechanical and chemical analysis in compounds made from these ternary compositions. In this context, this study aimed to analyze the results of the influence of the incorporation of lime to the soil-cement to form a ternary mixture to produce soil-cement bricks and mortar without structural purposes. From the inclusion of contents of 6 %, 8 %, 10% and 12% lime to the soil, and soil-cement mixes in amounts of 2 %, 3 %, 4 % and 5 % were shaped-bodies of -cylindrical specimens to determine the optimum moisture content and maximum dry apparent specific weight. Then they were cured, and subjected to the tests of compressive strength, absorption and durability modified. Compositions obtained the best results in the tests performed on the bodies-of-proof cylindrical served as a parameter for molding of solid bricks, which underwent the same experimental methodology previously cited. The raw materials used, as well as compositions in which the bricks were molded solid, were characterized by physical and chemical tests, X-ray diffraction and scanning electron microscopy. The results obtained in the study indicate that the compositions studied, that showed the best results in terms of compressive strength, water absorption and durability ternary composition was soil, 10 % cement and 2 % lime

influência da adição de diferentes sais em pastas de cimento portland para cimentação de poços de petróleo

One of the great challenges at present time related with the materials area concerns of products and processes for use in petroleum industry, more precisely related to the Pre-salt area. Progresses were reached in the last years allowing the drilling of the salt layer, with the time reduction for drilling and larger success at the end. For the oil wells companies the preponderant factor is the technology, however, in spite of the progress, a series of challenges is still susceptible to solutions and one of them refers to the slurries preparation for cementing in those areas. Inside of this context, this study had for objective to analyze the influence of the salts NaCl, KCl, CaSO4 and MgSO4 in strength and chemical structure of the hydrated products. As methodology, they were prepared and analyzed cement slurries with varied concentrations of these salts that are commonly found in the saline formations. The salts concentrations used in formulations of the slurries were of 5%, 15% and 30%. The slurries were formulated with specific weight of 15,8 lb / gal and the cement used was Class G. Strength tests were accomplished in samples cured by 24 hours and 28 days. Also were realized crystallographic characterization (XRD) and morphologic (SEM). In agreement with the presented results, it is observed that the largest resistance values are attributed to the slurries with concentration of 15%. There was reduction of the strength values of the slurries formulated with concentration of 30%. Through the characterization microstructural it was possible to note the salts influence in the main cement hydrated products

Estudos comparativos do ciclo de regeneração de diferentes tipos de silicoaluminofosfatos

Different types of heterogeneous catalysts of the silicoaluminophosphate type, (SAPO-5, SAPO-11, SAPO-31, SAPO-34 and SAPO-41), molecular sieves with a: AFI, AEL, ATO, CHA and AFO structure, respectively, were synthesized through the hydrothermal method. Using sources such as hydrated alumina (pseudobohemita), phosphoric acid, silica gel, water, as well as, different types of organic structural templates, such as: cetyltrimethylammonium bromide (CTMABr), di-isopropylamine (DIPA), di-n- propylamine (DNPA) and tetraethylammonium hydroxide (TEOS), for the respective samples. During the preparation of the silicoaluminophosphates, the crystallization process of the samples occurred at a temperature of approximately 200 ° C, ranging through periods of 18-72 h, when it was possible to obtain pure phases for the SAPOs. The materials were furthermore washed with deionized water, dried and calcined to remove the molecules of the templates. Subsequently the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared region (FT-IR), specific surface area and thermal analysis via TG/DTG. The acidic properties were determined using adsorption of n-butylamine followed by programmed termodessorption. These methods revealed that the SAPO samples showed a typically weak to moderate acidity. However, a small amount of strong acid sites was also detected. The deactivation of the catalysts was conducted by artificially coking the samples, followed by n-hexane cracking reactions in a fixed bed with a continuous flow micro-reactor coupled on line to a gas chromatograph. The main products obtained were: ethane, propane, isobutene, n-butane, n-pentane and isopentane. The Vyazovkin (model-free) kinetics method was used to determine the catalysts regeneration and removal of the coke

Influência da adição de gres porcelanato no comportamento mecânico e microestrutural em pastas de cimento portland para cimentação de poços de petróleo

Cementation operation consists in an extremely important work for the phases of perforation and completion of oil wells, causing a great impact on the well productivity. Several problems can occur with the cement during the primary cementation, as well as throughout the productive period. The corrective operations are frequent, but they are expensive and demands production time. Besides the direct cost, prejudices from the interruption of oil and gas production till the implementation of a corrective operation must be also taken into account. The purpose of this work is the development of an alternative cement paste constituted of Portland cement and porcelainized stoneware residue produced by ceramic industry in order to achieve characteristics as low permeability, high tenacity, and high mechanical resistance, capable of supporting various operations as production or oil wells recuperation. Four different concentration measures of hydrated paste were evaluated: a reference paste, and three additional ones with ceramic residue in concentrations of the order of 10%, 20% and 30% in relation to cement dough. High resistance and low permeability were found in high concentration of residues, as well as it was proved the pozolanic reactivity of the residue in relation to Portland cement, which was characterized through x-ray and thermogravimetry assays. It was evident the decrease of calcium hydroxide content, once it was substituted by formation of new hydrated products as it was added ceramic residue

Incorporação de resíduo cerâmico para prevenção da retrogressão da resistência de cimentos de poços de petróleo submetidos à injeção de vapor

Steam injection is the most used thermal recovery method of oil nowadays because of the high degree of development of the technique that allows high recovery factors. However, injection of superheated steam into the reservoir affects the entire structure of the well, including the cemented layer that presents a retrogression of compressive strength and increases the permeability due to formation of more crystalline and denser phases at temperatures above 110 °C. These changes result in failures in the cement that favor the entrance of formation fluids into the annulus space resulting in unsafe operations and restrictions in the economic life of the well. But the strength retrogression can be prevented by partial replacement of cement by silica-based materials that reduce the CaO/SiO2 ratio of cement slurries changing the trajectory of the reactions, converting those deleterious phases in phases with satisfactory mechanical strength and permeability. The aim of this study was to evaluate the behavior of a ceramic waste material rich in silica in partial and total substitution of a mineral additive used to fight the strength retrogression of cement slurries subjected to high temperatures. The evaluation was made by compression, X-ray diffraction (XRD) and thermogravimetry (TG/DTG). The samples were submitted to a cycle of low temperature (38 °C) for 28 days and a cycle of low temperature followed by exposure to 280 ºC and 1000 psi by 3 days. The results showed that slurries with additions of up to 30% of the waste material are not enough to prevent the strength retrogression, while slurries with additions of the waste material combined with silica flour in various proportions produced hydrated products of low Ca/Si ratios that maintained the compressive strength at satisfactory levels

Desenvolvimento de pastas cimentantes utilizando cimentos portland compostos para cimentação de poços petrolíferos

The Compound Portland cements are commonly used in construction, among them stand out the CPII-Z, CPII-F and CPIV. These types of cement have limited application on oil well cementing, having its compositional characteristics focused specifically to construction, as cement for use in oil wells has greater complexity and properties covering the specific needs for each well to be coated. For operations of oil wells cementing are used Portland cements designed specifically for this purpose. The American Petroleum Institute (API) classifies cements into classes designated by letters A to J. In the petroleum industry, often it is used Class G cement, which is cement that meets all requirements needed for cement from classes A to E. According to the scenario described above, this paper aims to present a credible alternative to apply the compound cements in the oil industry due to the large availability of this cement in relation to oil well cements. The cements were micro structurally characterized by XRF, XRD and SEM tests, both in its anhydrous and hydrated state. Later technological tests were conducted to determine the limits set by the NBR 9831. Among the compound cements studied, the CPII-Z showed satisfactory properties for use in primary and secondary operations of oil wells up to 1200 meters cementing

Influência da adição de cinza do bagaço de cana calcinada em sistemas de pastas para cimentação de poços petrolíferos

Cementing operation is one of the most important stages in the oil well drilling processes and has main function to form hydraulic seal between the various permeable zones traversed by the well. However, several problems may occur with the cement sheath, either during primary cementing or during the well production period. Cements low resistance can cause fissures in the cement sheath and compromise the mechanical integrity of the annular, resulting in contamination of groundwater and producing zones. Several researches show that biomass ash, in particular, those generated by the sugarcane industry have pozzolanic activity and can be added in the composition of the cementing slurries in diverse applications, providing improvements in mechanical properties, revenue and cement durability. Due to the importance of a low cost additive that increases the mechanical properties in a well cementing operations, this study aimed to potentiate the use of sugarcane bagasse ash as pozzolanic material, evaluate the mechanisms of action of this one on cement pastes properties and apply this material in systems slurries aimed to cementing a well with 800 m depth and geothermal gradient of 1.7 °F/100 ft, as much primary cementing operations as squeeze. To do this, the ash beneficiation methods were realized through the processes of grinding, sifting and reburning (calcination) and then characterization by X-ray fluorescence, XRD, TG / DTG, specific surface area, particle size distribution by laser diffraction and mass specific. Moreover, the ash pozzolanic activity added to the cement at concentrations of 0%, 20% and 40% BWOC was evaluated by pozzolanic activity index with lime and with Portland cement. The evaluation of the pozzolanic activity by XRD, TG / DTG and compressive strength confirmed the ash reactivity and indicated that the addition of 20% in the composition of cement slurries produces improvement 34% in the mechanical properties of the slurry cured. Cement slurries properties evaluated by rheological measurements, fluid loss, free fluid, slurry sedimentation, thickening time and sonic strength (UCA) were satisfactory and showed the viability of using the sugarcane ash in cement slurries composition for well cementing

Distribution of neutral prilocaine in a phospholipid bilayer: Insights from molecular dynamics simulations

In this work, we report a 20-ns constant pressure molecular dynamics simulation of prilocaine (PLC), in amine-amide local anesthetic, in a hydrated liquid crystal bilayer of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine. The partition of PLC induces the lateral expansion of the bilayer and a concomitant contraction in its thickness. PLC molecules are preferentially found in the hydrophobic acyl chains region, with a maximum probability at similar to 12 angstrom from the center of the bilayer (between the C(4) and C(5) methylene groups). A decrease in the acyl chain segmental order parameter, vertical bar S-CD vertical bar, compared to neat bilayers, is found, in good agreement with experimental H-2-NMR studies. The decrease in vertical bar S-CD vertical bar induced by PLC is attributed to a larger accessible volume per lipid in the acyl chain region. (C) 2008 Wiley Periodicals, Inc.

Preferential location of prilocaine and etidocaine in phospholipid bilayers: A molecular dynamics study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dose inseminante para fertilização artificial de ovócitos de dourado

Objetivou-se determinar a dose inseminante adequada para uso na fertilização artificial de ovócitos de dourado (Salminus brasiliensis). Os ovócitos foram distribuídos em delineamento inteiramente casualizado, e fertilizados com uma das relações espermatozoides/ovócito 6,0×10³; 6,0×10(4); 6,0×10(5); 6,0×10(6) ou 3,0×10(7), cada uma com quatro repetições. Considerou-se unidade experimental uma incubadora de volume útil de 2,5 L, contendo 2,0 mL de ovócitos não-hidratados. As taxas de fertilização foram mensuradas 8 horas após o início da fertilização. Com intuito de verificar possíveis efeitos da diluição seminal na movimentação dos espermatozoides, realizou-se a mensuração do tempo de duração da motilidade espermática dos espermatozoides de dourado, ativados por meio de diferentes relações de diluição: 6,8×10-5; 6,8×10-4; 6,8×10-3; 6,8×10-2; 3,4×10-1 e 1,0 mL de sêmen por mL de água. O tempo de duração da motilidade foi avaliado em delineamento inteiramente casualizado composto de seis tratamentos e três repetições. As taxas de fertilização apresentaram relação quadrática com o número de espermatozoides por ovócito. As relações de diluição do sêmen tiveram efeito inversamente proporcional sobre a duração da motilidade espermática. A relação que proporcionou melhores taxas de fertilização artificial de ovócitos de dourado (Salminus brasiliensis) foi de 30.722 espermatozoides por ovócio.

Efeitos da calagem do solo no crescimento inicial e absorção de macronutrientes por plantas de trapoeraba (Commelina benghalensis)

A presente pesquisa foi conduzida visando estudar os efeitos da calagem do solo sobre o crescimento inicial e absorção de macronutrientes por plantas de trapoeraba (Commelina benghalensis L.). A fase experimental foi conduzida em casa de vegetação, em vasos de cinco litros e o substrato foi coletado na camada arável de um Latossolo Vermelho Escuro, distrófico, classe textural franco-argilo-arenosa e valor original de pH igual a 3,8. O experimento foi instalado no delineamento inteiramente casualizado com quatro repetições e os tratamentos constaram da incorporação de quantidades correspondentes às doses 0, I, 2, 3, 4 e 5 t/ha de calcário dolomítico calcinado. Foi efetuada uma incubação por 15 dias antes do plantio das mudas da trapoeraba. Os resultados foram avaliados 49 dias após o transplante. A planta daninha respondeu intensamente à calagem incrementando a área foliar e os acúmulos de matéria seca e de N, P, Ca, Mg e S. Os padrões de distribuição dos diferentes macronutrientes nas diversas estruturas morfológicas da planta foram alterados. O acúmulo de K cresceu até a dose de 2 t/ha de calcário e depois decresceu, possivelmente devido ao antagonismo com Mg, adicionado através do calcário.

Aplicação de calcário e culturas de cobertura na implantação do sistema plantio direto em cerrado

Este estudo objetivou avaliar a correção do solo no estabelecimento do sistema plantio direto em Latossolo Vermelho localizado em região típica de Cerrado, Selvíria - MS. Os tratamentos consistiram em cinco formas de aplicação de calagem, em dose única ou parcelada, e duas culturas de cobertura. A calagem sem incorporação, independentemente do modo de aplicação, corrigiu a acidez do solo e aumentou os teores de Ca e Mg na camada de 0-0,05 m; nas demais profundidades, não houve alterações significativas desses atributos. A incorporação do calcário na camada de 0-0,2m modificou, uniformemente, os valores de pH, Ca, Mg e soma de bases do solo até à profundidade de 0,2 m. O sorgo como cultura de cobertura possibilitou maiores teores de Ca e Mg quando a dose de calcário foi subdividida em três aplicações.

Adubação nitrogenada para milho com o uso de plantas de cobertura e modos de aplicação de calcário

O sistema plantio direto (SPD) é uma realidade na região dos Cerrados, mas alguns questionamentos persistem nesse tipo de manejo como o modo de realização da calagem e a dose de nitrogênio (N) a ser adotada em cultura comercial, em relação às culturas precedentes. Desse modo, objetivou-se avaliar modos de aplicar o calcário na implantação do SPD e o efeito de culturas de cobertura precedentes sobre a necessidade de adubação nitrogenada da cultura do milho, durante diferentes anos agrícolas. O delineamento experimental utilizado foi de blocos casualizados, em esquema fatorial 5 x 2 (modos de aplicação do calcário x culturas de cobertura) e posterior divisão em três subparcelas, referentes às doses de N (0, 90 e 180 kg ha-1). Foram avaliados quatro modos de aplicação de calcário: incorporado a 0-0,2 m, em out./2001; dose total em superfície aplicada, em out./2001; aplicação de 1/2 da dose, em out./2001, e 1/2, em ago./2002, na superfície; e aplicação de 1/3 da dose recomendada, em mar./2001, + 1/3, em out./2001, e 1/3, em ago./2002, também em superfície. Além de um tratamento testemunha (sem calcário) e duas culturas de cobertura, crotalária e milheto. Os diferentes modos de calagem não alteraram a produtividade de grãos de milho. O cultivo de milho após crotalária apresentou melhor desempenho e menor demanda de adubação nitrogenada, quando comparado ao cultivado após milheto.

Low glyphosate rates do not affect Citrus limonia (L.) Osbeck seedlings

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Glyphosate has low toxicity to citrus plants growing in the field

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)