Temporal Narrowing of Neutrons Produced by High-Intensity Short-Pulse Lasers

The production of neutron beams having short temporal duration is studied using ultraintense laser pulses. Laser-accelerated protons are spectrally filtered using a laser-triggered microlens to produce a short duration neutron pulse via nuclear reactions induced in a converter material (LiF). This produces a similar to 3 ns duration neutron pulse with 10(4) n/MeV/sr/shot at 0.56 m from the laser-irradiated proton source. The large spatial separation between the neutron production and the proton source allows for shielding from the copious and undesirable radiation resulting from the laser-plasma interaction. This neutron pulse compares favorably to the duration of conventional accelerator sources and should scale up with, present and future, higher energy laser facilities to produce brighter and shorter neutron beams for ultrafast probing of dense materials.

Dynamic modelling of die melt temperature profile in polymer extrusion: Effects of process settings, screw geometry and material

Extrusion is one of the major methods for processing polymeric materials and the thermal homogeneity of the process output is a major concern for manufacture of high quality extruded products. Therefore, accurate process thermal monitoring and control are important for product quality control. However, most industrial extruders use single point thermocouples for the temperature monitoring/control although their measurements are highly affected by the barrel metal wall temperature. Currently, no industrially established thermal profile measurement technique is available. Furthermore, it has been shown that the melt temperature changes considerably with the die radial position and hence point/bulk measurements are not sufficient for monitoring and control of the temperature across the melt flow. The majority of process thermal control methods are based on linear models which are not capable of dealing with process nonlinearities. In this work, the die melt temperature profile of a single screw extruder was monitored by a thermocouple mesh technique. The data obtained was used to develop a novel approach of modelling the extruder die melt temperature profile under dynamic conditions (i.e. for predicting the die melt temperature profile in real-time). These newly proposed models were in good agreement with the measured unseen data. They were then used to explore the effects of process settings, material and screw geometry on the die melt temperature profile. The results showed that the process thermal homogeneity was affected in a complex manner by changing the process settings, screw geometry and material.

Ultrashort self-assembling peptidomimetic nanomaterials target resistant pathogenic infections

The impending and increasing threat of antimicrobial resistance has led to a greater focus into developing alternative therapies as substitutes for traditional antibiotics for the treatment of multi-drug resistant infections.1 Our group has developed a library of short, cost-effective, diphenylalanine-based peptides (X1-FF-X2) which selective eradicate (viability reduced >90% in 24 hours) the most resistant biofilm forms of a range of Gram-positive and negative pathogens including: methicillin resistant and sensitive Staphyloccoccus aureus and Staphyloccoccus epidermidis; Pseudomonas aeruginosa, Proteus mirabilis and Escherichia coli. They demonstrate a reduced cell cytotoxic profile (NCTC929 murine fibroblast) and limited haemolysis.2 Our molecules have the ability respond to subtle changes in pH, associated with bacterial infection, self-assembling to form β-sheet secondary structures and supramolecular hydrogels at low concentrations (~0.5%w/v). Conjugation of variety of aromatic-based drugs at the X1 position, including non-steroidal anti-inflammatories (NSAIDs), confer further pharmacological properties to the peptide motif enhancing their therapeutic potential. In vivo studies using waxworms (Galleria mellonella) provide promising preliminary results demonstrating the low toxicity and high antimicrobial activity of these low molecular weight gelators in animal models. This work shows biofunctional peptide-based nanomaterials hold great promise for future translation to patients as antimicrobial drug delivery and biomaterial platforms.3 [1] G. Laverty, S.P. Gorman and B.F. Gilmore. Int.J.Mol.Sci. 2011, 12, 6566-6596. [2] G. Laverty, A.P. McCloskey, B.F. Gilmore, D.S. Jones, J Zhou, B Xu. Biomacromolecules. 2014, 15, 9, 3429-3439. [3] A.P. McCloskey, B.F. Gilmore and G.Laverty. Pathogens. 2014, 3, 791-821.

A review of high magnetic moment thin films for microscale and nanotechnology applications

The creation of large magnetic fields is a necessary component in many technologies, ranging from magnetic resonance imaging, electric motors and generators, and magnetic hard disk drives in information storage. This is typically done by inserting a ferromagnetic pole piece with a large magnetisation density MS in a solenoid. In addition to large MS, it is usually required or desired that the ferromagnet is magnetically soft and has a Curie temperature well above the operating temperature of the device. A variety of ferromagnetic materials are currently in use, ranging from FeCo alloys in, for example, hard disk drives, to rare earth metals operating at cryogenic temperatures in superconducting solenoids. These latter can exceed the limit on MS for transition metal alloys given by the Slater-Pauling curve. This article reviews different materials and concepts in use or proposed for technological applications that require a large MS, with an emphasis on nanoscale material systems, such as thin and ultra-thin films. Attention is also paid to other requirements or properties, such as the Curie temperature and magnetic softness. In a final summary, we evaluate the actual applicability of the discussed materials for use as pole tips in electromagnets, in particular, in nanoscale magnetic hard disk drive read-write heads; the technological advancement of the latter has been a very strong driving force in the development of the field of nanomagnetism.

The Use of High Surface Area Silica and Supercritical Carbon Dioxide to Enhance Solubility of Poorly Water-Soluble Drugs

Purpose Poor water-solubility of BCS class II drugs can limit their commercialization because of reduced oral bioavailability. It has been reported that loading of drug by adsorption onto porous silica would enhance drug solubility due to the increased surface area available for solvent diffusion. In this work, solid dispersions are formed using supercritical carbon dioxide (scCO2). The aim of this research was to characterise the solid-state properties of scCO2 dispersion and to investigate the impact of altering scCO2 processing conditions on final amorphous product performance that could lead to enhancement of drug dissolution rate for BCS class II drugs. Methods Indomethacin (IND) was purchased from Sigma-Aldrich (Dorset, UK) and was used as a model drug with two grades of high surface area silica (average particle sizes 3&[micro] and 7&[micro]), which were obtained directly from Grace-Davison (Germany). Material crystallinity was evaluated using powder X-ray diffraction (PXRD, Rigaku™, miniflex II, Japan) and high-speed differential scanning calorimetry (Hyper-DSC 8000, Perkin Elmer, USA). Materials were placed in a high-pressure vessel consisting of a CO2 cylinder, a Thar™ Technologies P50 high-pressure pump and a 750 ml high-pressure vessel (Thar, USA). Physical mixtures were exposed to CO2 gas above its critical conditions. SEM imaging and elemental analysis were conducted using a Jeol 6500 FEGSEM (Advanced MicroBeam Inc., Austria). Drug release was examined using USP type II dissolution tester (Caleva™, UK). Results The two grades of silica were found to be amorphous using PXRD and Hyper-DSC. Using PXRD, it was shown that an increase in incubation time and pressure resulted in a decrease in the crystalline content. Drug release profiles from the two different silica formulations prepared under the same conditions are shown in Figure 1. It was found that there was a significant enhancement in drug release, which was influenced, by silica type and other experiment conditions such as temperature, pressure and exposure time. SEM imaging and elemental analysis showed drug deposited inside silica pores as well as on the outer surface. Conclusion This project has shown that silica carrier platforms may be used as an alternative approach to generating polymeric solid dispersions of amorphous drugs exhibiting enhanced solubility.

Effect of radium-223 dichloride on symptomatic skeletal events in patients with castration-resistant prostate cancer and bone metastases: results from a phase 3, double-blind, randomised trial

BACKGROUND: Bone metastases frequently cause skeletal events in patients with metastatic castration-resistant prostate cancer. Radium-223 dichloride (radium-223) selectively targets bone metastases with high-energy, short-range α-particles. We assessed the effect of radium-223 compared with placebo in patients with castration-resistant prostate cancer and bone metastases.

METHODS: In this phase 3, double-blind, randomised ALSYMPCA trial, we enrolled patients who had symptomatic castration-resistant prostate cancer with two or more bone metastases and no known visceral metastases, who were receiving best standard of care, and had previously either received or were unsuitable for docetaxel. Patients were stratified by previous docetaxel use, baseline total alkaline phosphatase level, and current bisphosphonate use, then randomly assigned (2:1) to receive either six intravenous injections of radium-223 (50 kBq/kg) or matching placebo; one injection was given every 4 weeks. Randomisation was done with an interactive voice response system, taking into account trial stratification factors. Participants and investigators were masked to treatment assignment. The primary endpoint was overall survival, which has been reported previously. Here we report on time to first symptomatic skeletal event, defined as the use of external beam radiation to relieve bone pain, or occurrence of a new symptomatic pathological fracture (vertebral or non-verterbal), or occurence of spinal cord compression, or tumour-related orthopeadic surgical intervention. All events were required to be clinically apparent and were not assessed by periodic radiological review. Statistical analyses of symptomatic skeletal events were based on the intention-to-treat population. The study has been completed and is registered with ClinicalTrials.gov, number NCT00699751.

FINDINGS: Between June 12, 2008, and Feb 1, 2011, 921 patients were enrolled, of whom 614 (67%) were randomly assigned to receive radium-223 and 307 (33%) placebo. Symptomatic skeletal events occurred in 202 (33%) of 614 patients in the radium-223 group and 116 (38%) of 307 patients in the placebo group. Time to first symptomatic skeletal event was longer with radium-223 than with placebo (median 15·6 months [95% CI 13·5-18·0] vs 9·8 months [7·3-23·7]; hazard ratio [HR]=0·66, 95% CI 0·52-0·83; p=0·00037). The risks of external beam radiation therapy for bone pain (HR 0·67, 95% CI 0·53-0·85) and spinal cord compression (HR=0·52, 95% CI 0·29-0·93) were reduced with radium-233 compared with placebo. Radium-223 treatment did not seem to significantly reduce the risk of symptomatic pathological bone fracture (HR 0·62, 95% CI 0·35-1·09), or the need for tumour-related orthopaedic surgical intervention (HR 0·72, 95% CI 0·28-1·82).

INTERPRETATION: Radium-223 should be considered as a treatment option for patients with castration-resistant prostate cancer and symptomatic bone metastases.

FUNDING: Algeta and Bayer HealthCare Pharmaceuticals.

A miR-433 mediated mechanism of chemoresistance in high grade serous ovarian cancer (HGSOC).

Higher expression of the miR-433 microRNA (miRNA) is associated with poorer survival outcomes in patients with HGSOC that may be overcome by a greater understanding of the functional role of this miRNA. We previously described miR-433 as a critical cell cycle regulator and mediator of cellular senescence. Downregulation of the mitotic arrest deficiency 2 (MAD2) protein by miR-433 led to increased cellular resistance to paclitaxel in epithelial ovarian cancer cells (EOC). Furthermore immunohistochemical (IHC) analysis of MAD2 expression in patients with HGSOC showed that loss of MAD2 was significantly associated with poorer patient survival. Higher miR-433 expression is also associated with an increased resistance to the platins which is unrelated to loss of MAD2 expression. In silico analysis of the miR-433 target proteins in the TCGA database identified the association between a number of miR-433 targets and poorer patient survival. IHC analysis of the miR-433 target, histone deacetylase 6 (HDAC6), confirmed that its expression was significantly associated with a decrease in patient overall survival. The knock-down of HDAC6 by siRNA in EOC cells did not attenuate apoptotic responses to paclitaxel or platin although lower endogenous HDAC6 expression was associated with more resistant EOC cell lines. In vitro analysis revealed that EOC cells which survived chemotherapeutic kill with high doses of paclitaxel expressed higher miR-433 and concomitant decreased expression of the miR-433 targets. These cells were more chemoresistant compared to the parental cell line and repopulated as 3d organoid cultures in non-adherent stem cell selective conditions; thus indicating that the cells which survive chemotherapy were viable, capable of regrowth and had an increased potential for pluripotency. In conclusion, our data suggests that chemotherapy is not driving the transcriptional upregulation of miR-433 but rather selecting a population of cells with high miR-433 expression that may contribute to chemoresistant disease and tumour recurrence.

Effects of defined mixtures of persistent organic pollutants (POPs) on multiple cellular responses in the human hepatocarcinoma cell line, HepG2, using high content analysis screening

Persistent organic pollutants (POPs) are toxic substances, highly resistant to environmental degradation, which can bio-accumulate and have long-range atmospheric transport potential. Most studies focus on single compound effects, however as humans are exposed to several POPs simultaneously, investigating exposure effects of real life POP mixtures on human health is necessary. A defined mixture of POPs was used, where the compound concentration reflected its contribution to the levels seen in Scandinavian human serum (total mix). Several sub mixtures representing different classes of POP were also constructed. The perfluorinated (PFC) mixture contained six perfluorinated compounds, brominated (Br) mixture contained seven brominated compounds, chlorinated (Cl) mixture contained polychlorinated biphenyls and also p,p'-dichlorodiphenyldichloroethylene, hexachlorobenzene, three chlordanes, three hexachlorocyclohexanes and dieldrin. Human hepatocarcinoma (HepG2) cells were used for 2h and 48h exposures to the seven mixtures and analysis on a CellInsight™ NXT High Content Screening platform. Multiple cytotoxic endpoints were investigated: cell number, nuclear intensity and area, mitochondrial mass and membrane potential (MMP) and reactive oxygen species (ROS). Both the Br and Cl mixtures induced ROS production but did not lead to apoptosis. The PFC mixture induced the ROS production and likely induced cell apoptosis accompanied by the dissipation of MMP. Synergistic effects were evident for ROS induction when cells were exposed to the PFC+Br mixture. No significant effects were detected in the Br+Cl, PFC+Cl or total mixtures, which contain the same concentrations of chlorinated compounds as the Cl mixture plus additional compounds; highlighting the need for further exploration of POP mixtures in risk assessment.

Factors influencing the success of rural cataract surgery programs in China:The study of hospital administration and relative productivity (SHARP)

PURPOSE. To explore factors potentially influencing the success or failure of rural Chinese hospitals in increasing cataract surgical output and quality. METHODS. Focus groups (FGs, n = 10) were conducted with hospital administrators, doctors, and nurses at 28 county hospitals in Guangdong Province. Discussions explored respondents' views on increasing surgical volume and quality and improving patient satisfaction. Respondents numerically ranked possible strategies to increase surgical volume and quality and patient satisfaction. FG transcripts were independently coded by two reviewers utilizing the constant comparative method following the grounded theory approach, and numerical responses were scored and ranked. RESULTS. Ten FGs and 77 ranking questionnaires were completed by 33 administrators, 23 doctors, and 21 nurses. Kappa values for the two coders were greater than 0.7 for all three groups. All groups identified a critical need for enhanced management training for hospital directors. Doctors and nurses suggested reducing surgical fees to enhance uptake, although administrators were resistant to this. Although doctors saw the need to improve equipment, administrators felt current material conditions were adequate. Respondents agreed that patient satisfaction was generally high, and did not view increasing patient satisfaction as a priority. CONCLUSIONS. Our findings highlight agreements and disagreements among the three stakeholder groups about improving surgical output and quality, which can inform strategies to improve cataract programs in rural China. Respondents' beliefs about high patient satisfaction are not in accord with other studies in the area, highlighting a potential area for intervention. © 2013 The Association for Research in Vision and Ophthalmology, Inc.

Design, production and characterisation of granular adsorbent material for arsenic removal from contaminated wastewater

The objective of this research was to design granulated iron oxide for the adsorption of heavy metals from wastewater. Polyvinyl acetate (PVAc) was chosen as a suitable binder; as it is water insoluble. Initial experiments on selection of suitable solvent of the polymer were carried out using three solvents namely; methanol, acetone and toluene. Based on the initial tests on product yield and mechanical strength, acetone was selected as the solvent for the polyvinyl acetate binder. Design of experiment was then used to investigate the influence of granulation process variables; impeller speed, binder concentration and liquid to solid ratio on the properties of the granular materials. The response variables in the study were granules mean size, stability in water and granule strength. The results showed that the combination of high impeller speed and high binder concentration favour the formation of strong and stable granules. Results also showed that leaching of the binder into the simulated was water was negligible. Trial adsorption experiments carried out using the strongest and most stable iron oxide granules produced in this work showed removal efficiency of around 70% of synthetic arsenic solutions with initial concentration of 1000 ppb.

An optimized reverse-phase high performance liquid chromatographic method for evaluating percutaneous absorption of glucosamine hydrochloride

A relatively simple, selective, precise and accurate high performance liquid chromatography (HPLC) method based on a reaction of phenylisothiocyanate (PITC) with glucosamine (GL) in alkaline media was developed and validated to determine glucosamine hydrochloride permeating through human skin in vitro. It is usually problematic to develop an accurate assay for chemicals traversing skin because the excellent barrier properties of the tissue ensure that only low amounts of the material pass through the membrane and skin components may leach out of the tissue to interfere with the analysis. In addition, in the case of glucosamine hydrochloride, chemical instability adds further complexity to assay development. The assay, utilising the PITC-GL reaction was refined by optimizing the reaction temperature, reaction time and PITC concentration. The reaction produces a phenylthiocarbamyl-glucosamine (PTC-GL) adduct which was separated on a reverse-phase (RP) column packed with 5 microm ODS (C18) Hypersil particles using a diode array detector (DAD) at 245 nm. The mobile phase was methanol-water-glacial acetic acid (10:89.96:0.04 v/v/v, pH 3.5) delivered to the column at 1 ml min-1 and the column temperature was maintained at 30 degrees C. Galactosamine hydrochloride (Gal-HCl) was used as an internal standard. Using a saturated aqueous solution of glucosamine hydrochloride, in vitro permeation studies were performed at 32+/-1 degrees C over 48 h using human epidermal membranes prepared by a heat separation method and mounted in Franz-type diffusion cells with a diffusional area 2.15+/-0.1 cm2. The optimum derivatisation reaction conditions for reaction temperature, reaction time and PITC concentration were found to be 80 degrees C, 30 min and 1% v/v, respectively. PTC-Gal and GL adducts eluted at 8.9 and 9.7 min, respectively. The detector response was found to be linear in the concentration range 0-1000 microg ml-1. The assay was robust with intra- and inter-day precisions (described as a percentage of relative standard deviation, %R.S.D.) <12. Intra- and inter-day accuracy (as a percentage of the relative error, %RE) was <or=-5.60 and <or=-8.00, respectively. Using this assay, it was found that GL-HCl permeates through human skin with a flux 1.497+/-0.42 microg cm-2 h-1, a permeability coefficient of 5.66+/-1.6x10(-6) cm h-1 and with a lag time of 10.9+/-4.6 h.

Bio-removal of toxic metals by metal resistant anaerobic bacteria: molecular characterization and performance studies

Tese de dout., Ciências Biotecnológicas (Biotecnologia Ambiental), Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2010

Compostagem e caracterização de resíduos vegetais para utilização como substratos hortícolas

O objectivo deste trabalho foi estudar a utilização de 5 compostos de resíduos de origem vegetal, como componentes de substratos hortícolas. Estudaram-se os processos de compostagem de bagaço de azeitona, bagaço de uva, polpa de alfarroba, casca de eucalipto e casca de pinheiro, caracterizaram-se os compostos obtidos e testou-se a sua aptidão agronómica, como substratos para viveiro de tomate (Lycopersicum esculentum Mill.) em placas alveoladas e cultura de pelargónio (Pelargonium x hortorum) em vaso. Após uma preparação prévia, que em alguns dos resíduos vegetais constou de moenda, suplemento de azoto e aumento do teor de humidade, efectuou-se a sua compostagem em caixas com 1200 L de capacidade, isoladas termicamente, com arejamento por volteio manual. Depois foram analisadas as suas características físicas e químicas e testados na sua aptidão como constituintes únicos de substratos e em misturas com turfa de sphagnum. A maioria dos processos de compostagem apresentou uma evolução habitual da temperatura, com a máxima aproximando-se ou ultrapassando 60 oC. Como excepções, verificou-se um período de compostagem muito longo em bagaço de azeitona; o atraso da fase termofílica em polpa de alfarroba e, na 1ª compostagem de casca de pinheiro, a temperatura não alcançou a zona termofílica. A maioria dos resíduos manifestaram uma acentuada resistência à degradação durante a compostagem, à excepção da polpa de alfarroba e da casca de eucalipto. Contudo, a nível físico-químico e químico registaram-se evoluções acentuadas, sobretudo nas variáveis relacionadas com alterações da superfície das partículas, como por exemplo, a capacidade de troca catiónica. Outras variáveis apresentaram uma evolução interessante para o acompanhamento do processo e o conhecimento do grau de estabilidade do composto final. Foi apreciável o efeito proporcionado pela adição de lamas de estação de tratamento de águas residuais urbanas, como suplemento azotado, a nível das propriedades físicas dos compostos, do aumento da velocidade do processo de compostagem e do enriquecimento dos compostos em macro e micronutrientes. A compostagem não conduziu à melhoria significativa das propriedades físicas dos materiais, excepto em casca de eucalipto. Os compostos caracterizaram-se fundamentalmente por uma reduzida capacidade de retenção de água e uma elevada capacidade de arejamento. Os compostos obtidos com incorporação de lamas apresentaram os valores mais baixos de capacidade de arejamento, mesmo assim dentro dos limites satisfatórios e, os valores mais altos de capacidade de retenção de água. Na cultura em placas alveoladas, o comportamento de muitas das misturas com compostos não se diferenciou do da testemunha, observando-se uma flutuação sazonal do comportamento das misturas nos dois viveiros de cada ano, associada às condições ambientais mais exigentes do ponto de vista da disponibilidade de água. Observou-se um maior número de correlações significativas entre as características dos substratos e as variáveis relativas ao crescimento das plantas nos viveiros efectuados mais tarde, sob condições de maior evapotranspiração. As plantas obtidas no segundo viveiro de tomate foram instaladas em cultura. As características das plantas do viveiro, apresentaram elevada correlação com as respectivas produções obtidas no campo, evidenciando a importância da qualidade das plantas de viveiro, na produção. Nos ensaios de pelargónio em vaso, também se observaram comportamentos idênticos ao da testemunha em muitas das misturas com compostos. Observou-se no 2º ensaio, um maior número de tratamentos com resultados idênticos aos da testemunha, resultante das condições de menor exigência hídrica, as quais fizeram sobressair menos as diferenças de propriedades físicas das misturas. Contudo, a diferença de crescimento obtido em algumas misturas, atribuiu-se também à interferência da continuidade capilar entre o vaso de papel com a estaca enraizada e a mistura em estudo. O trabalho presente mostrou que é possível obter compostos a partir de resíduos orgânicos, com boas características e a preço competitivo para utilização como substratos hortícolas. O processo de compostagem sendo um elemento chave, é fácil de controlar se houver uma regulação eficaz do arejamento e do teor de humidade durante o processo. Apesar de alguns resíduos, como a polpa de alfarroba, serem caros, se tomarmos em consideração o custo da sua eliminação, poderão conduzir a substratos comercialmente viáveis. Em condições ambientais que favoreçam uma maior evapotranspiração ou, em culturas com maior exigência hídrica, pode ser aconselhável a mistura dos compostos estudados com turfa de sphagnum pouco decomposta para melhorar a capacidade de retenção de água.

Bio-synthesis of nanosized semiconductors using mine wastes as material sources

This work describes the synthesis of nanosized metal sulfides and respective SiO2 and/or TiO2 composites in high yield via a straightforward process, under ambient conditions (temperature and pressure), by adding to aqueous metals a nutrient solution containing biologically generated sulfide from sulfate-reducing bacteria (SRB). The nanoparticles‘ (NPs) morphological properties were shown not to be markedly altered by the SRB growth media composition neither by the presence of bacterial cells. We further extended the work carried out, using the effluent of a bioremediation system previously established. The process results in the synthesis of added value products obtained from metal rich effluents, such as Acid Mine Drainage (AMD), when associated with the bioremediation process. Precipitation of metals using sulfide allows for the possibility of selective recovery, as different metal sulfides possess different solubilities. We have evaluated the selective precipitation of CuS, ZnS and FeS as nanosized metal sulfides. Again, we have also tested the precipitation of these metal sulfides in the presence of support structures, such as SiO2. Studies were carried out using both artificial and real solutions in a continuous bioremediation system. We found that this method allowed for a highly selective precipitation of copper and a lower selectivity in the precipitation of zinc and iron, though all metals were efficiently removed (>93% removal). This research has also demonstrated the potential of ZnS-TiO2 nanocomposites as catalysts in the photodegradation of organic pollutants using the cationic dye, Safranin-T, as a model contaminant. The influence of the catalyst amount, initial pH and dye concentration were also evaluated. Finally, the efficiency of the precipitates as catalysts in sunlight mediated photodegradation was investigated, using different volumes of dye-contaminated water (150 mL and 10 L). This work demonstrates that all tested composites have the potential to be used as photocatalysts for the degradation of Safranin-T.

Effects of mixture of nanoparticles under different salinity in the clams Ruditapes philippinarum and Ruditapes decussatus

Dissertação de mestrado, Biologia Marinha, Faculdade de Ciências e Tecnologia, Universidadde do Algarve, 2015