Qualidade da carne de bovinos recriados em pastagens associada a suplementação e terminação a pasto ou no confinamento

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Equilíbrio eletrolítico e condicionamento térmico precoce na criação de frangos de corte submetidos ao estresse térmico /Mayara Maia Rodrigues. -: Mayara Maia Rodrigues. -

Pós-graduação em Ciência Animal - FMVA

Elaboração de um roteiro interpretativo para trilha de ciclista da Florestal Estadual Edmundo Navarro de Andrade, Rio Claro/SP

The State Forest Edmundo Navarro de Andrade (FEENA), Rio Claro/SP has a huge potential for cyclists tracks; the Unit already have a trail at the principal entrance, passing by firebreaks bordering the towers quadrants and finishing at the municipal road. This work aims the ambiental interpretation of this trail already established and implant activities planned before at the public use program of the State Forest according to the management plan of the Unit; to interpret the tracks for mountain bike cyclists; promote the conservation of natural, historic and cultural resources of the Forest. At the present work has been accomplished the Ambiental Interpretation through the panels, containing the characteristic native flora and fauna, the existing water resources at the Unit and also the representatives individuals of the exotic arboreal species, found around the trail. Ten points were chosen for interpretation, therefore, for preparation of the script it was considered besides the bibliographic literature, experiences of project team members at FEENA, Unit Management Plan knowledge relating the gaps in the public use program and field work. The panels contain figures and texts about the chosen topics, to promote a language easily understandable to the visitor and concomitantly, inform to the population who attends the Unit, increasing this way the user satisfaction

Dispositivo de microdescargas em gases na pressão atmosférica

This work describes the development of an electro-mechanical micro-discharges device operating at ambient condition of pressure and temperature, capable to produce plasma jets for surface finishing. The discharges are produced through a needle shape electrode hollow cathode type by which flows the helium gas. The voltage applied on the electrode is provided for an AC/AC switching voltage converter of full-bridge topology. The converter is energized by a power line of 110/220 VAC, 60 Hz and gives a 1000 V peak-to-peak from 5 kHz to 40 kHz square waveform output. The output frequency is defined by a control signal provided by an external signal generator. The equipment setup includes output acquisition of voltage and current and a photo-detector for photo-electrical measurements, which allows an optical characterization of the plasma jet

Usinagem do alumínio da classe 6005 com uso de ferramenta cerâmica

The machining process is so much important in the economic world. Many machining parameters have been studied to maximize results, in terms of cost and lifetime. (decrease of cutting tool wear, improved surface finish, among others). The objective of this study is to evaluate the wear of a ceramic tool in the machining of the aluminum alloy 6005 A. The analysis of the wear of the cutting tools is very important due to its big impact on the final finishing of the piece as a whole. The evaluation took place in two stages, first it was done a detailed study of the literature of the whole machining process, where the study of the formation and swarf classification were among the most important steps in this phase. The second step consisted in the machining of the piece of aluminum 6005 A with a ceramic cutting tool constituded of aluminum oxide and magnesium oxide with silicon carbide impregnation. The swarf generated in this process was then photographed with a Zeiss optical microscope and analyzed for its size and shape. Through this comparison it was concluded that the swarf are generated shear swarfs, shaped like a tangled, fragmented and arcs connected, thus classifying the material as medium difficulty machining. Through the image analysis tool it was concluded that the parameter of lower wear was the: Vc = 500m / min, f = 0.10mm / rev and ap = 0.5mm

Torneamento da liga de alumínio da classe 6005 utilizando ferramenta cerâmica

Machining processes are one of the most important manufacturing processes in the modern world. In these processes, there are many elements which will influence in the final result of the machined part. Among them, the tools are the principal factor of the rising cost, because its global influence on the process. In aeronautical industries, this can be more evidenced due the need to machining several alloys, between them, aluminum alloys. These alloys have to demonstrate a specific surface finishing to be used in aircraft's fuselage. This kind of industry is one of the segments which is still rising in Brazil, and they are looking viable alternatives in the manufacturing processes of materials, due the need to produce more and more parts and equipment, with costs increasingly reduced. The purpose of this project is the development of a ceramic with differentiated properties. The ceramics were developed using a pre-sintering at 1200 °C, with posterior sintering at 1600°C, and subjected to dry turning process on aluminum alloy 6005. The characterizations showed that ceramics presented with toughness on the center of 1700 MPa and on the surface of 1950 MPa, density 98,5 ±0,14. g/cm³. Ceramics were grinded and faceted, according to ISO standard 1832, and subjected to turning tests in a ROMI lathe brand, model GL240M, using cutting speeds of 500, 800 and 1000 m/min with different feed rates. The machining results showed low occurrence of flank wear to all cutting speeds, and better surface finishing average values of Ra = 0,4935 μm and Rt = 8,112 μm. In general, it could be seen that the tool presents important potential to machining 6005 alloy, and that the use of correct parameters can decrease and/or eliminate subsequent processes, providing important reductions in costs related to the machining processes

Energy Restriction During Breeding Gilt Development: An Economic Analysis

Swine production has increasingly become a lowmargin business. As costs of production have increased, producers are continuing to increase efficiency in both market pig production and gilt development. Restricting energy during gilt development reduces feeding costs and can enhance some productivity measures, but can also negatively impact other areas of production. Thus, the net economic returns from a restricted energy gilt development program are unclear. This study utilized gilt development and market pig production data for two genetic lines of hogs, LWxLR (a cross between industry Large White and Landrace) and L45X (a Nebraska line selected 23 generations for increased litter size) from Johnson and Miller and Johnson et al., to estimate the returns to finishing market hogs using conventional and restricted energy gilt development programs.

Elaboração de um roteiro interpretativo para trilha de ciclista da Florestal Estadual Edmundo Navarro de Andrade, Rio Claro/SP

The State Forest Edmundo Navarro de Andrade (FEENA), Rio Claro/SP has a huge potential for cyclists tracks; the Unit already have a trail at the principal entrance, passing by firebreaks bordering the towers quadrants and finishing at the municipal road. This work aims the ambiental interpretation of this trail already established and implant activities planned before at the public use program of the State Forest according to the management plan of the Unit; to interpret the tracks for mountain bike cyclists; promote the conservation of natural, historic and cultural resources of the Forest. At the present work has been accomplished the Ambiental Interpretation through the panels, containing the characteristic native flora and fauna, the existing water resources at the Unit and also the representatives individuals of the exotic arboreal species, found around the trail. Ten points were chosen for interpretation, therefore, for preparation of the script it was considered besides the bibliographic literature, experiences of project team members at FEENA, Unit Management Plan knowledge relating the gaps in the public use program and field work. The panels contain figures and texts about the chosen topics, to promote a language easily understandable to the visitor and concomitantly, inform to the population who attends the Unit, increasing this way the user satisfaction

Dispositivo de microdescargas em gases na pressão atmosférica

This work describes the development of an electro-mechanical micro-discharges device operating at ambient condition of pressure and temperature, capable to produce plasma jets for surface finishing. The discharges are produced through a needle shape electrode hollow cathode type by which flows the helium gas. The voltage applied on the electrode is provided for an AC/AC switching voltage converter of full-bridge topology. The converter is energized by a power line of 110/220 VAC, 60 Hz and gives a 1000 V peak-to-peak from 5 kHz to 40 kHz square waveform output. The output frequency is defined by a control signal provided by an external signal generator. The equipment setup includes output acquisition of voltage and current and a photo-detector for photo-electrical measurements, which allows an optical characterization of the plasma jet

Usinagem do alumínio da classe 6005 com uso de ferramenta cerâmica

The machining process is so much important in the economic world. Many machining parameters have been studied to maximize results, in terms of cost and lifetime. (decrease of cutting tool wear, improved surface finish, among others). The objective of this study is to evaluate the wear of a ceramic tool in the machining of the aluminum alloy 6005 A. The analysis of the wear of the cutting tools is very important due to its big impact on the final finishing of the piece as a whole. The evaluation took place in two stages, first it was done a detailed study of the literature of the whole machining process, where the study of the formation and swarf classification were among the most important steps in this phase. The second step consisted in the machining of the piece of aluminum 6005 A with a ceramic cutting tool constituded of aluminum oxide and magnesium oxide with silicon carbide impregnation. The swarf generated in this process was then photographed with a Zeiss optical microscope and analyzed for its size and shape. Through this comparison it was concluded that the swarf are generated shear swarfs, shaped like a tangled, fragmented and arcs connected, thus classifying the material as medium difficulty machining. Through the image analysis tool it was concluded that the parameter of lower wear was the: Vc = 500m / min, f = 0.10mm / rev and ap = 0.5mm

Torneamento da liga de alumínio da classe 6005 utilizando ferramenta cerâmica

Machining processes are one of the most important manufacturing processes in the modern world. In these processes, there are many elements which will influence in the final result of the machined part. Among them, the tools are the principal factor of the rising cost, because its global influence on the process. In aeronautical industries, this can be more evidenced due the need to machining several alloys, between them, aluminum alloys. These alloys have to demonstrate a specific surface finishing to be used in aircraft's fuselage. This kind of industry is one of the segments which is still rising in Brazil, and they are looking viable alternatives in the manufacturing processes of materials, due the need to produce more and more parts and equipment, with costs increasingly reduced. The purpose of this project is the development of a ceramic with differentiated properties. The ceramics were developed using a pre-sintering at 1200 °C, with posterior sintering at 1600°C, and subjected to dry turning process on aluminum alloy 6005. The characterizations showed that ceramics presented with toughness on the center of 1700 MPa and on the surface of 1950 MPa, density 98,5 ±0,14. g/cm³. Ceramics were grinded and faceted, according to ISO standard 1832, and subjected to turning tests in a ROMI lathe brand, model GL240M, using cutting speeds of 500, 800 and 1000 m/min with different feed rates. The machining results showed low occurrence of flank wear to all cutting speeds, and better surface finishing average values of Ra = 0,4935 μm and Rt = 8,112 μm. In general, it could be seen that the tool presents important potential to machining 6005 alloy, and that the use of correct parameters can decrease and/or eliminate subsequent processes, providing important reductions in costs related to the machining processes

Lipid and selenium sources on fatty acid composition of intramuscular fat and muscle selenium concentration of Nellore steers

The objective of this study was to evaluate the effect of lipid and selenium sources in diets for finishing Nellore steers on the fatty acid composition and selenium concentration of the longissimus muscle. Fifty Nellore steers (body weight = 458 +/- 39 kg) were assigned to one of six dietary treatments: 1) diet containing sunflower seed and inorganic selenium; 2) sunflower seed and organic selenium; 3) whole cottonseed and inorganic selenium; 4) whole cottonseed and organic selenium; 5) soybeans and inorganic selenium; and 6) soybeans and organic selenium. Diets were formulated with the same amount of nitrogen and calories and supplied once daily to steers in collective pens, with three animals per pen, for 120 d. At the end of the trial, steers were slaughtered and samples of the longissimus muscle were collected for fatty acid and selenium analysis. Effect of selenium sources was detected for selenium concentration in the longissimus muscle. Organic selenium had higher concentrations in the meat compared with inorganic selenium. The total saturated, monounsaturated and polyunsaturated fatty acids did not differ between the sources of lipids and selenium. For selenium sources, no differences were observed between the concentrations of polyunsaturated fat. Also, no differences in C18:2 cis-9 trans-11 concentrations were noted; however, steers fed sunflower seed presented greater proportions of this fatty acid in the meat. The results indicated that the use of sunflower seed, cottonseed or soybeans and organic or inorganic selenium in feedlot diets to Nellore cattle does not alter the great part of the fatty acid profile of the longissimus muscle. However, the inclusion of sunflower seed in the diet increases the meat CLA cis-9, trans-11, which is desirable and beneficial for the health of consumers.

Fatty acid composition of the longissimus dorsi muscle in crossbred steers fed different sources of fatty acids

The objective of this study was to evaluate the fatty acid composition of the longissimus dorsi muscle in carcasses of 3/4 Bos taurus taurus 1/4 Bos taurus indicus steers fed different sources of fatty acids. Thirty-six steers aged 14 months, with a mean live weight of 320 kg, were fed the following diets for 96 days:1) control diet, containing no supplemental fat source; 2) CaSFA, diet containing 50 g calcium salts of fatty acids per kg total dry matter; 3) CS diet, containing 210 g cottonseed per kg total dry matter. The fatty acid composition of the longissimus dorsi muscle was determined by gas chromatography. No difference in slaughter weight, carcass weight, backfat thickness, or longissimus dorsi muscle area was observed between animals receiving the diets CaSFA and CS. Animals consuming the two fat-supplemented diets presented higher concentrations of oleic (C18:1), palmitic (C16:0) and stearic (C18:0) acids, corresponding to an average 80.76% of total fatty acids, and higher concentrations of vaccenic acid (C18:1 t11) in the muscle when compared with the control group. Supplementation of the diet of feedlot crossbred steers with CaSFA or cottonseed did not promote significant alterations in the lipid composition of the longissimus dorsi muscle.

Ceramic Primer Heat-Treatment Effect on Resin Cement/Y-TZP Bond Strength

The purpose of this study was to evaluate the effect of different heat-treatment strategies for a ceramic primer on the shear bond strength of a 10-methacryloyloxydecyl-dihydrogen-phosphate (MDP)-based resin cement to a yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) ceramic. Specimens measuring 4.5 x 3.5 x 4.5 mm(3) were produced from Y-TZP presintered cubes and embedded in polymethyl methacrylate (PMMA). Following finishing, the specimens were cleaned using an ultrasound device and distilled water and randomly divided into 10 experimental groups (n=14) according to the heat treatment of the ceramic primer and aging condition. The strategies used for the experimental groups were: GC (control), without primer; G20, primer application at ambient temperature (20 degrees C); G45, primer application + heat treatment at 45 degrees C; G79, primer application + heat treatment at 79 degrees C; and G100, primer application + heat treatment at 100 degrees C. The specimens from the aging groups were submitted to thermal cycling (6000 cycles, 5 degrees C/55 degrees C, 30 seconds per bath) after 24 hours. A cylinder of MDP-based resin cement (2.4 mm in diameter) was constructed on the ceramic surface of the specimens of each experimental group and stored for 24 hours at 37 degrees C. The specimens were submitted to a shear bond strength test (n=14). Thermal gravimetric analysis was performed on the ceramic primer. The data obtained were statistically analyzed by two-way analysis of variance and the Tukey test (alpha=0.05). The experimental group G79 without aging (7.23 +/- 2.87 MPa) presented a significantly higher mean than the other experimental groups without aging (GC: 2.81 +/- 1.5 MPa; G20: 3.38 +/- 2.21 MPa; G100: 3.96 +/- 1.57 MPa), showing no difference from G45 only (G45: 6 +/- 3.63 MPa). All specimens of the aging groups debonded during thermocycling and were considered to present zero bond strength for the statistical analyses. In conclusion, heat treatment of the metal/zirconia primer improved bond strength under the initial condition but did not promote stable bonding under the aging condition.

Effect of supplementation of two sources and two levels of copper on lipid metabolism in Nellore beef cattle

This study was conducted with 35 Nellore beef cattle to determine the effect of supplementation of two levels and two copper sources (organic and inorganic) on metabolism of lipids and cholesterol of meat. The five treatments used were: Control: without copper supplementation, 110 or 140: 10 or 40 mg/kg DM (as Cu sulfate), O10 or O40: 10 or 40 mg/kg DM (as Cu proteinate). In general, the copper supplementation changed the fatty acid profile of meat (p < 0.05), with a higher proportion of unsaturated fatty acids and reduction of saturated fatty acids. There was no effect of supplementation on blood cholesterol and triglycerides, however; in general, there was a reduction in cholesterol concentration in the L dorsi (p < 0.05) compared to the control treatment through the reduction (p < 0.05) in the concentrations of GSH and GSH/GSSG ratio. The Cu supplementation did have an influence on metabolism of lipids. The production of healthier meat is beneficial to public health by reducing the risk of cardiovascular disease. (C) 2012 Elsevier Ltd. All rights reserved.