Análise da adição de resíduo oriundo do tratamento de esgotos em massa cerâmica utilizada para fabricação de telhas

Sludge of Wastewater Treatment Plants (WTPs) disposal is a problem for any municipality, for this reason the amount of sludge production is now a key issue in selecting treatment methods. It is necessary to investigate new applications for this waste type, due to the restrictions imposed by the environmental organs. The raw materials used in the Red Ceramic, are generally very heterogeneous, for this reason, such materials can tolerate the presence of different types of wastes. In Rio Grande do Norte, the roof tiles production corresponds to 60,61% from the total of ceramic units produced. Due to the importance of the ceramic industry of roof tiles for the state, allied to the environmental problem of the sludge disposal, this work had for objective to verify the possibility of the incorporation of sewage sludge in ceramic body used for production of roof tiles. In the research, sludge originating from drying beds of WTP of the Central Campus from UFRN and clays originating from a ceramic industry from Goianinha/RN were used. The raw materials were characterized by techniques of: analysis of particles distribution by diffraction to laser; real density; consistence limits; chemical analysis by X-ray fluorescence; mineralogical analysis by X-ray diffraction; organic matter; and solids content. Five batches of roof tiles were manufactured in the approximate dosages of 2%, 4%, 6%, 8% and 10%. To evaluate the properties of each final product, tests of water absorption, impermeability, bending strength, leachability and solubility were accomplished. The roof tiles manufactured with sludge presented characteristics similar to the roof tiles without sludge in relation to the environmental risk. The results showed that it is possible to use approximately up to 4% of sludge in ceramic bodies for production of roof tiles. However, it is observed that the high amount of organic matter (71%) present in the sludge is shown as factor that limits the sludge incorporation in ceramic bodies, worsening the quality of the roof tiles. It is necessary the use of mixtures of different raw materials under point of view of the granulometry and of the other chemical and mineralogical properties for the obtaining of a satisfactory mass to the production of ceramic roof tiles

Um estudo sobre a interação estrela-planeta a partir da relação massa-período planetário com a atividade estelar

n this work, we analyze the behavior of the chromospheric and coronal activities as a function of the mass and the orbital period of extrasolar planets which were detected by transit technique. So we look for possible effects of the planet on the star s chromosphere and corona. For this study we selected a sample of 48 stars with chromospheric activity indicator and 23 with coronal activity indicator. Our work is based on the work from Pont et al. (2011) in order to study stars with planets which were obtained by transit technique. Furthermore, we studied the relationship between planetary mass and orbital period with the chromospheric and coronal activity in order to better understand which influences the planets cause in the outer layers of stellar atmosphere. In our analysis we can observe that the mass of the planets exerts no influence in the stellar activity. However, we observed that the stellar coronal and chromospheric activities decrease with the increase of the orbital period of the planet

Um estudo sobre a interação estrela-planeta a partirda relação massa-período planetário com a atividade estelar

In this work, we analyze the behavior of the chromospheric and coronal activities as a function of the mass and the orbital period of extrasolar planets which were detected by transit technique. So we look for possible effects of the planet on the star s chromosphere and corona. For this study we selected a sample of 48 stars with chromospheric activity indicator and 23 with coronal activity indicator. Our work is based on the work from Pont et al. (2011) in order to study stars with planets which were obtained by transit technique. Furthermore, we studied the relationship between planetary mass and orbital period with the chromospheric and coronal activity in order to better understand which influences the planets cause in the outer layers of stellar atmosphere. In our analysis we can observe that the mass of the planets exerts no influence in the stellar activity. However, we observed that the stellar coronal and chromospheric activities decrease with the increase of the orbital period of the planet

Efeitos da irrigação e adubação nitrogenada sobre a massa de forragem de cultivares de Panicum maximum Jacq.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da influência da matéria orgânica, na determinação quantitativa de metais em amostras de sedimento, por espectrometria de absorção atômica e análise de metais traços por fluorescência de raios-X

The proposal of this work is to evaluate the influence of the organic matter on the results of the analyses of the metals (Zn, Pb, Al, Cu, Cr, Fe, Cd e Ni) for Atomic Absorption Spectrometry (AAS), so much in the extraction stage as in the reading using for that the chemometrics. They were used for this study sample of bottom sediment collected in river Jundiaí in the vicinity of the city of Macaíba-RN, commercial humus and water of the station of treatment of sewer of UFRN. Through the analyses accomplished by EAA it was verified that the interference of the organic matter happens in the extraction stage and not in the reading. With relationship to the technique of X Ray Fluorescence Spectrometry (XRFS), the present work has as intended to evaluate the viability of this technique for quantitative analysis of trace metals (Cr, Ni, Cu, Zn, Rb, Sr and Pb) in having leached obtained starting from the extraction with acqua regia for an aqueous solution. The used samples constitute the fine fraction (<0.063 mm) of sediments of swamp of the river Jundiaí. The preparation of tablets pressed starting from the dry residue of those leached it allowed your analysis in the solid form. This preliminary study shows that, in the case of the digestion chemistry partially of the fine fractions of bottom sediments used for environmental studies, the technique of applied EFRX to the analysis of dry residues starting from having leached with acqua regia, compared her it analyzes of the leached with ICP-OES, it presents relative mistakes for Cu, Pb, Sr and Zn below 10%

Espectrometria de emissão óptica com plasma indutivamente acoplado aliada à quimiometria na determinação de íons metálicos no molusco Mytella falcata para discriminação de estuários potiguares

This work examined the possibility of using mussel Mytella falcata as bioindicator sample to detect metal ions in several estuaries potiguares, since species substances that accumulate in their tissues due to its characteristics filter feeders have been used for environmental monitoring. The chemometrics by principal components analysis was used to reduce the size of the original data in order to establish a pattern of distribution of metal ion. Samples were collected at three different points in the estuaries Curimataú, Guaraíra-Papeba, Potengi, Galinhos-Guamaré and Piranhas-Assu having been marked with the location using GPS (Global Positioning System). The determination of humidity content and digestion of the samples were performed using methods described in the Compendium of analytical standards of the Institute Adofo Lutz (2005) and the determination of metal ions of the elements Al, Ba, Cd, Cr, Cu, Mn, Ni, Pb, Sn and Zn were performed by optical emission spectrometry with inductively coupled plasma as described by USEPA method 6010C. The results show that it is possible to use this molluscum Mytella falcata in the estuaries of Rio Grande do Norte for the determination of metal ions. The data were subjected to principal components analysis (PCA) which enabled us to verify the distribution pattern of the metal ions studied in several estuaries potiguares and group them according to the metal ions in common with and relate them to the activities in each region

Produtividade de grãos de milho e massa seca de braquiárias em consórcio no sistema de integração lavoura-pecuária

Objetivou-se avaliar as produtividades de grãos de milho e massa seca de braquiárias em duas modalidades de consórcio em sistema de integração lavoura-pecuária no período de inverno-primavera em região do Cerrado. O experimento foi conduzido no ano de 2006, na Fazenda de Ensino, Pesquisa e Extensão (FEPE), pertencente à Faculdade de Engenharia (FE/UNESP - Campus de Ilha Solteira), localizada no município de Selvíria, MS. O delineamento experimental utilizado foi de blocos casualizados, em esquema fatorial 4x2, com cinco repetições. Os tratamentos constituíram-se de quatro espécies de braquiárias (Brachiaria brizantha cv. 'Marandu', Brachiaria decumbens, Brachiaria ruziziensis e Brachiaria híbrido cv. 'Mulato II') consorciadas na linha e a lanço no momento da semeadura do milho. Avaliaram-se os componentes da produção, a produtividade do milho, bem como a massa seca das braquiárias após a colheita do milho. As forrageiras consorciadas a lanço, com destaque para a Brachiaria ruziziensis proporcionaram menor desenvolvimento das plantas de milho e menores valores dos componentes da produção, bem como da produtividade de grãos. Apesar de satisfatórias produtividades de massa seca (acima de 2.500kg ha-1), com exceção da Brachiaria brizantha, as demais espécies consorciadas a lanço foram superiores, com destaque para a Brachiaria decumbens e a Brachiaria ruziziensis que apresentaram maior adaptabilidade e produtividade de forragem no consórcio com milho em sistema de integração lavoura-pecuária.

Influência da densidade de carga e da massa molar da poliacrilamida na reologia de sistemas microemulsionados

The knowledge of the rheological behavior of microemulsionated systems (SME) is of fundamental importance due to the diversity of industrial applications of these systems. This dissertation presents the rheological behavior of the microemulsionated system formed by RNX 95/alcohol isopropyl/p-toulen sodium sulfonate/kerosene/distilled water with the addition of polyacrylamide polymer. It was chosen three polymers of the polyacrylamide type, which differ in molar weight and charge density. It was studied the addition of these polymers in relatively small concentration 0,1% in mass and maximum concentration of 2,0%. It was made analysis of flow to determine the appearing viscosities of the SME and rheological parameters applying Bingham, Ostwald de Waale and Herschell-Buckley models. The behavior into saline environment of this system was studied for a solution of KCl 2,0%, replacing the distilled water. It was determined the behavior of microemulsions in relation with the temperature through curves of flow in temperatures of 25 to 60ºC in variations of 5ºC. After the analysis of the results the microemulsion without the addition of polymer presented a slight increase in its viscosity, but it does not mischaracterize it as a Newtonian fluid. However the additive systems when analyzed with low concentration of polymer adjusted well to the applied models, with a very close behavior of microemulsion. The higher concentration of the polymer gave the systems a behavior of plastic fluid. The results of the temperature variation point to an increase of viscosity in the systems that can be related to structural changes in the micelles formed in the own microemulsion without the addition of polymer

Caracterização e aplicação de vermicultura natural e quimicamente modificada na adsorção de azul de metileno

Chemical modification of clays has been extremely studied in the search for improvements of their properties for use in various areas, such as in combating pollution by industrial effluents and dyes. In this work, the vermiculite was chemically modified in two ways, characterized and evaluated the adsorption of methylene blue dye. First was changed with the addition of a surfactant (hexadecyltrimethylammonium bromide, BHTA) making it an organophilic clay and then by adding an acid (HCl) by acid activation. Some analyzes were performed as X-ray fluorescence (FRX), X-ray diffraction (DRX), adsorption isotherms of methylene blue dye, infrared (FTIR) , scanning electron microscopy (SEM), thermal gravimetric analysis and spectroscopy energy dispersive (EDS). Analysis by FRX of natural vermiculite indicates that addition of silicon and aluminum, clay presents in its structure the magnesium, calcium and potassium with 16 % organic matter cations. The DRX analyzes indicated that the organic vermiculite was an insertion of the surfactant in the space between the lamellae, vermiculite and acid partial destruction of the structure with loss of crystallinity. The adsorption isotherms of methylene blue showed that there was a significant improvement in the removal of dye to the vermiculite with the addition of cationic surfactant hexadecyltrimethylammonium bromide and treatment with acid using HCl 2 mol/L. In acid vermiculites subsequently treated with surfactant, the adsorption capacity increased with respect to natural vermiculite, however was much lower compared vermiculite modified with acid and surfactant separately. Only the acidic vermiculite treated with surfactant adjusted to the Langmuir model. As in the infrared spectrometry proved the characteristics of natural vermiculite. In the organic vermiculite was observed the appearance of characteristic bands of CH3, CH2, and (CH3)4N. Already on acid vermiculite, it was realized a partial destruction with decreasing intensity of the characteristic band of vermiculite that is between 1074 and 952 cm-1. In the SEM analysis, it was observed that there was partial destruction to the acid treatment and a cluster is noted between the blades caused by the presence of the surfactant. The TG shows that the higher mass loss occurs at the beginning of the heating caused by the elimination of water absorbed on the surface between layers. In the organic vermiculite also observed a loss of mass between 150 and 300 °C caused decomposition of the alkylammonium molecules (surfactants)

Detecção de metamidofós em solos por métodos ecotoxicológico e cromatografia líquida acoplada à espectrometria de massas sequencial (LC-MS/MS)

Soil contamination by pesticides is an environmental problem that needs to be monitored and avoided. However, the lack of fast, accurate and low cost analytical methods for discovering residual pesticide in complex matrices, such as soil, is a problem still unresolved. This problem needs to be solved before we are able to assess the quality of environmental samples. The intensive use of pesticides has increased since the 60s, because the dependence of their use, causing biological imbalances and promoting resistance and recurrence of high populations of pests and pathogens (upwelling). This has contributed to the appearance of new pests that were previously under natural control. To develop analytical methods that are able to quantify residues pesticide in complex environment. It is still a challenge for many laboratories. The integration of two analytical methods one ecotoxicological and another chemical demonstrates the potential for environmental analysis of methamidophos. The aim of this study was to evaluate an ecotoxicological method as "screening" analytical methamidophos in the soil and perform analytical confirmation in the samples of the concentration of the analyte by chemical method LC-MS/MS In this work we tested two soils: a clayey and sandy, both in contact with the kinetic methamidophos model followed pseudo-second order. The clay soil showed higher absorption of methamidophos and followed the Freundlich model, while the sandy, the Langmuir model. The chemical method was validated LC-MS/MS satisfactory, showing all parameters of linearity, range, precision, accuracy, and sensitivity adequate. In chronic ecotoxicological tests with C. dubia, the NOEC was 4.93 and 3.24 for ng L-1 of methamidophos to elutriate assays of sandy and clay soils, respectively. The method for ecotoxicological levels was more sensitive than LC-MS/MS detection of methamidophos, loamy and sandy soils. However, decreasing the concentration of the standard for analytical methamidophos and adjusting for the validation conditions chemical acquires a limit of quantification (LOQ) in ng L-1, consistent with the provisions of ecotoxicological test. The methods described should be used as an analytical tool for methamidophos in soil, and the ecotoxicological analysis can be used as a "screening" and LC-MS/MS as confirmatory analysis of the analyte molecule, confirming the objectives of this work

Bolton freeware: aplicativo de avaliação de discrepância de massa dentária desenvolvido pelo programa de pós-graduação em odontologia/UFRN

The calculation of tooth mass discrepancy, essential for good planning and a proper orthodontic finishing, when performed manually, besides being laborious, requires considerable time consumption. The aim of this study was to develop and test Bolton Freeware, a software for analysis of the tooth mass discrepancy of Bolton, aiming to minimize the consumption of time in a less onerous way. The digital analysis of the software was done by means of two-dimensional scanning of plaster study models and compared to manual evaluation (gold standard), using 75 pairs of stone plaster study models divided into two groups according to the magnitude of the Curve of Spee (group I from 0 to 2 mm, group II greater than 2 to 3mm). All the models had permanent dentition and were in perfect condition. The manual evaluation was performed with a digital caliper and a calculator, and the time required to perform the analysis for both methods was recorded and compared. In addition, the software was evaluated by orthodontists regarding its use, by means of questionnaires developed specifically for this purpose. Calibration was performed prior to manual analysis, and excellent levels of inter-rater agreement were achieved, with ICC > 0.75 and r > 0.9 for total and anterior proportion. It was observed in the evaluation of error of the digital method that some teeth showed a significant systematic error, being the highest measured at 0.08 mm. The analysis of total tooth mass discrepancy performed by Bolton Freeware, for those cases in which the curve of Spee is mild and moderate, differ from manual analysis, on average, 0.09 mm and 0.07 mm respectively, for each tooth evaluated, with r> 0, 8 for total and anterior proportion. According to the specificity and sensitivity test, Bolton Freeware has an improved ability to detect true negatives, i.e. the presence of discrepancy. The Bolton analysis digitally performed was faster, with an average difference of time consumed to perform the analysis of Bolton between the two methods of approximately 6 minutes. Most experts interviewed (93%) approved the usability of the software

Reavaliação da via aérea do paciente obeso submetido à cirurgia bariátrica após a redução do índice de massa corpórea

JUSTIFICATIVA E OBJETIVOS: A dificuldade na intubação traqueal é causa de mortalidade em anestesiologia e pode estar relacionada à obesidade. Diagnosticar uma intubação difícil contribui para o êxito da abordagem da via aérea, mas os parâmetros preditores de intubação difícil não estão bem estabelecidos. A classificação de Mallampati, a distância interincisivos, a circunferência do pescoço, a distância tireomentoniana e a presença da síndrome da apneia obstrutiva do sono são parâmetros que podem indicar uma intubação difícil. O tratamento cirúrgico da obesidade proporciona redução do índice de massa corpórea (IMC), com estabilização por volta de 2 anos. O objetivo desta pesquisa foi reavaliar os parâmetros descritos com os valores pré-cirúrgicos. MÉTODO: Cinquenta e um pacientes de ambos os sexos foram avaliados no período pré-operatório quanto a IMC, classificação de Mallampati, circunferência do pescoço, distância interincisivos, distância tireomentoniana e grau da síndrome de apneia obstrutiva do sono por meio da polissonografia. Após dois anos de cirurgia e redução do IMC < 35 kg.m-2, os preditores de intubação difícil foram reavaliados por outro médico anestesiologista com conhecimento do IMC prévio. Foram excluídos nove pacientes. Executou-se reavaliação dos parâmetros supracitados e, para os que não realizaram nova polissonografia, aplicou-se a escala de sonolência de Epiworth. RESULTADOS: Quarenta e dois pacientes foram reavaliados e mostraram redução do IMC e da circunferência do pescoço e aumento das distâncias interincisivos e tireomentoniana. Apenas um paciente apresentou redução na escala de Mallampati e somente quatro realizaram a polissonografia. CONCLUSÕES: A redução do IMC proporciona aumento das distâncias interincisivos e tireomentoniana e redução da circunferência do pescoço. O Mallampati permanece inalterado.

Avaliação do tempo de trânsito esofágico pelo ultrassom: influência do gênero e índice de massa corpórea

OBJETIVO: Utilizar a ultrassonografia do esôfago intra-abdominal para avaliar o tempo de trânsito esofágico para água e iogurte, em posição ortostática, e avaliar a influência do gênero e índice de massa corpórea. MATERIAIS E MÉTODOS: Foram estudados 89 indivíduos adultos jovens, sem clínica de doenças do trato gastrintestinal superior, sendo 40 do gênero feminino (média de 20,13 ± 1,62 anos) e 49 do gênero masculino (média de 20,43 ± 2,17 anos). O tempo de trânsito esofágico foi cronometrado, com o paciente em posição ortostática, durante a deglutição de água e iogurte. RESULTADOS: O tempo de trânsito esofágico para as mulheres e para os homens foi, respectivamente: para água, de 5,84 ± 1,60 segundos versus 6,66 ± 1,68 segundos, e para iogurte, de 9,12 ± 1,96 segundos versus 9,28 ± 1,70 segundos. Não se constatou diferença entre os gêneros masculino e feminino, apesar de o fator índice de massa corpórea ser menor nas mulheres. CONCLUSÃO: Os dados obtidos do tempo de trânsito esofágico para alimento líquido (água) e pastoso (iogurte), em posição ortostática, em adultos jovens não mostraram diferença entre os gêneros, mesmos nas mulheres com índice de massa corpórea menor em relação aos homens.

Influência da massa corporal sobre a aptidão física em adolescentes: estudo a partir de escolares do ensino fundamental e médio de Sorocaba/SP

Reconhecendo a exposição a riscos à saúde a que adolescentes obesos estão submetidos e a necessidade da produção de estudos, os quais relacionem excesso de peso corporal e capacidade física durante a puberdade, configura-se como objetivo da presente comunicação explorar as relações entre o sobrepeso e a aptidão física dos alunos de ensino fundamental e médio de escola particular paulista. Trata-se de estudo de coorte, considerando como variável independente o índice de massa corporal (IMC) e como dependentes a resistência muscular localizada (RML) abdominal, força de membros inferiores (MMII), flexibilidade e agilidade. Os dados de interesse foram colhidos em duas oportunidades (no início de dois anos letivos subseqüentes), segundo testes específicos. Foi realizada análise multivariada dos perfis médios, complementada com a construção dos intervalos de confiança simultâneos, ao nível de 5% de significância. Constatou-se prevalência de 21,42% de sobrepeso e associação deste com: i) em meninos, menores RML abdominal e força de MMII e não evolução nas médias de agilidade; ii) em meninas, menor RML abdominal e agilidade, no início do período considerado. Ao se compararem os resultados entre os dois momentos de avaliação, notou-se que: i) a agilidade, das meninas com peso corporal adequado diminuiu significantemente; ii) a RML abdominal, mesmo do grupo masculino com sobrepeso, aumentou; e iii) a agilidade, somente em meninos com IMC inferior, melhorou. Verificaram-se, também entre o sexo masculino, médias de RML abdominal, força de MMII e agilidade significantemente maiores que as do grupo feminino. Nesse sentido, revela-se que a prescrição da atividade física para adolescentes deve realmente ser específica segundo composição corporal e sexo.

Qualidade de vida de mulheres com baixa massa óssea na pós-menopausa

OBJETIVO: avaliar a qualidade de vida de pacientes com osteoporose e osteopenia, acompanhadas em ambulatórios especializados em osteoporose e climatério, comparando-as com pacientes com densidade mineral óssea (DMO) normal. MÉTODOS: estudo de série de casos transversal, observacional, que se propôs a analisar, por meio do questionário Medical Outcomes Study 36 Short-Form Health Survey (SF-36), a qualidade de vida de mulheres com osteopenia e osteoporose. Foram avaliadas 124 mulheres na pós-menopausa divididas em três grupos: 55 pacientes com diagnóstico densitométrico de osteoporose, 35 com o de osteopenia e 34 que apresentavam DMO normal. Os três grupos foram comparados com relação aos dados demográficos, características clínicas e de estilo de vida e aos diferentes domínios do SF-36. RESULTADOS: as pacientes dos grupos osteopenia e DMO normal apresentaram menor idade média (56,7±7,1 e 52,9±5,4 anos), maior índice de massa corpórea (IMC) (28,6±3,7 e 30,9±5,1 kg/m²) e menor tempo de menopausa (8,4±5,9 e 5,8±4,5 anos) quando comparadas ao grupo osteoporose (61,8±10,1 anos, IMC de 25,7±5,3 kg/m², 15,5±7,5 anos, respectivamente; p<0,05). de acordo com o SF-36, não houve diferença significativa entre os grupos com relação aos domínios, à exceção do domínio vitalidade, que se mostrou superior no grupo osteoporose. Com relação à impressão pessoal sobre seu estado de saúde, das pacientes que o consideraram bom, um maior percentual pertencia ao grupo osteoporose, e entre aquelas que o consideraram ruim, um percentual menor pertencia ao grupo osteopenia. CONCLUSÃO: a qualidade de vida foi similar em mulheres com osteoporose e osteopenia, em relação às com DMO normal, à exceção do domínio vitalidade, que foi superior, paradoxalmente, nas pacientes com osteoporose.