Caracterização de uma cerâmica 3Y-TZP e avaliação do efeito de tratamentos de superfície na adesão da cerâmica ao glaze ou cimento resinoso

Pós-graduação em Odontologia Restauradora - ICT

Quantificação de endotoxinas e sua relação com sinais / sintomas e volumetria da lesão periapical e do canal radicular em dentes com infecção endodôntica primária

Pós-graduação em Odontologia Restauradora - ICT

Digital radiography for determination of primary tooth length: in vivo and ex vivo studies

Background. Methods for determining the root canal length of the primary tooth should yield accurate and reproducible results. In vitro studies show some limitations, which do not allow their findings to be directly transferred to a clinical situation. Aim. To compare the accuracy of radiographic tooth length obtained from in vivo digital radiograph with that obtained from ex vivo digital radiograph. Method. Direct digital radiographs of 20 upper primary incisors were performed in teeth (2/3 radicular resorption) that were radiographed by an intraoral sensor, according to the long-cone technique. Teeth were extracted, measured, and mounted in a resin block, and then radiographic template was used to standardise the sensor-target distance (30 cm). The apparent tooth length (APTL) was obtained from the computer screen by means of an electronic ruler accompanying the digital radiography software (CDR 2.0), whereas the actual tooth length (ACTL) was obtained by means of a digital calliper following extraction. Data were compared to the ACTL by variance analysis and Pearson’s correlation test. Results. The values for APTL obtained from in vivo radiography were slightly underestimated, whereas those values obtained from ex vivo were slightly overestimated. No significance was observed between APTL and ACTL. Conclusion. The length of primary teeth estimated by in vivo and ex vivo comparisons using digital radiography was found to be similar to the actual tooth length.

Adaptação marginal do agregado de trióxido mineral com e sem cloreto de cálcio em retrocavidades

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Incomplete vertical root fracture associated with lateral compaction technique: a microscopic analysis

Objective: This study evaluated the effects of root canal obturation employing lateral compaction technique and spreader load of 1.5 kg on the incidence of complete (CVRF) or incomplete vertical root fractures (IVRF). Material and Methods: Twenty-seven distal roots of extracted human mandibular molars were used. All root canals were prepared by biomechanical step-back technique and obturated by lateral compaction technique. The prepared roots were distributed into two groups: G1- experimental (n = 17) and G2- control (n = 10). During obturation, load of 1.5 kg was applied to a size # 30 finger spreader. Pre- and post-obturation images of the coronal portion of the roots were captured by inverted digital microscopy and analyzed by one trained examiner. Data were evaluated by Fisher’s test (p < 0.05) using GrapH Pad Prism 5.0. Results: No roots exhibited CVRF. All fractures observed before and after obturation were IVRF or “other defects”. In G2 (control group), there was no increase of IVRF number. Interestingly, G1 presented an increase in the IVRF number to 70.59% in the 12 teeth out of 17 teeth studied. The statistical analysis showed that the mean of IVRF increased significantly in G1 when compared to G2 (p < 0.05). Conclusion: The application of a 1.5 kg spreader load during lateral compaction technique does not produce complete vertical root fractures, but may produce incomplete fractures or “other defects”.

Evaluación del comportamiento biológico de tres cementos obturadores endodónticos en tejido subcutáneo de ratones

The aim of this study was to evaluate the biological behavior of the root canal filling sealers: Endofill, Endomethasone and Sealer 26 when in contact with the subcutaneous connective tissue of rat. For the study one control and three experimental groups were used. A total of 15 animals were divided into 5 for each period: 7, 21, and 60 days. The obtained histological sections were processed and stained using the hematoxiline & eosine technique. The histological sections were subjective and comparatively analyzed using optic microscopy. The intensity of the inflammatory reaction and the level of fibrosis of the tissue were registered. The results were registered in scores and statistical analysis by KRUSKAL-WALLIS p<0,05 and MILLER methods. The statistical analysis revealed that in the period of 60 days, there was statistical significance to group II (Endofill) between group (control) and III (Endomethasone) with mononuclear cells into connective tissue. All materials promoted inflammatory reaction more intense at 7 and 21 days with the Endomethasone showing the best results.

Influência da reinstrumentação do degrau apical radicular após o posicionamento primário do cone principal de guta-percha noselamento apical

The aim of this study was to evaluate in vitro the apical leakage after the apical re-preparation and replacement of the principal gutta-percha point plus endodontic sealer (Sealer 26TM). Sixty extracted human canines were prepared by using a step back technique up to size 50 K type file apically. At each change of instrument the canals were irrigated with distilled water. After that step, the external surface roots were coated and subdivided into six groups with ten roots each: I – single gutta percha point technique; II – lateral condensation and III – hybrid technique. The IV, V and VI groups were similar to others groups but after to place the principal gutta percha point, it was removed, re-prepared up to size 60K file and in sequence replaced the principal gutta percha point and the root canal filling finished. The specimens were immersed in 2% Rhodamine BTM for 7 days at 37 oC. The apical leakage was measured by Image ToolsTM program. With Kruskal Wallis test statistical analysis showed that there was no significant difference between the techniques (p > 0.05).

Influência do cimento obturador e agente de irrigação final na infiltração marginal em situações de sobreobturações endodônticas

Objective: The objective of this paper was to verify if the final irrigation at 17% EDTA, separately or followed by chlorhexidine digluconate at 2% interferes on the apical marginal leakage in root canal overfilling, due to the use of two root canal filling materials (Sealer 26TM or SealapexTM). Methods: Forty lower incisors extracted, with a single root canal, were biomechanically prepared, at 2.0mm beyond the radicular apex, with ProTaper SystemTM, finishing it with the F3 instrument. Irrigation was accomplished with 1.0 mL NaOCl at 2.5% at each change of equipment caliper and, in the end, with 5.0 mL normal saline solution. After achieving this procedure, the foraminal channels was standardized with a file K 25 until its DO appears in the foraminal opening. From this moment, the teeth were subdivided into two groups of 20 specimens each, because of the final irrigation method used: I – irrigation with EDTA at 17% for 3min and II – identical protocol, thus, after EDTA aspiration at17%, it was again irrigated with chlorhexidine digluconate at 2%, also kept intra-canal for 3min. Each group was again sub-divided into two sub-groups (ten teeth each), according to the cement used (Sealer 26TM or SealapexTM), and filled by using a single gutta-percha F1 (ProTaperTM, Universal Filling), in such a manner that it goes 2.0 mm beyond the radicular apex. Soon after that, the teeth were immersed in Rhodamine BTM for 72h, vacuum and after the roots have been bucolingually grooved, the leakages marked were measured with program Image ToolTM. Results and Conclusions: The leakage magnitude was similar among themselves (p > 0.05), except for group Sealapex®, thus the final use with chlorhexidine reduced apical leakage (p < 0.05).

Influência da agulha irrigadora e da dilatação do canal radicular na eficácia da irrigação endodôntica

Introduction: The irrigation of root canals aims to their cleaning and disinfection, improving endodontic treatment success. Objective: To investigate the influence of the diameter and type of irrigation needle and the root canal enlargement on the mechanical efficacy of endodontic irrigation. Material and methods: Twelve human single-rooted mandibular incisors were used. During some instrumentation stages (enlargement by #20, #30, and #40 K file), root canals were filled with radiographic contrast solution mixed to propyleneglycol and zinc oxide. Needles with different diameters and designs were employed: G1 – 23G and lateral opening; G2 – 22G and apical opening; G3 – 30G and lateral opening; G4 – 30G and apical opening. The needles were inserted up to resistance, with 1 mm step-back to avoid root canal obliteration. The irrigation was performed with 2 mL of distilled water. Before and after irrigation/aspiration, teeth were radiographed at bucco-lingual and mesiodistal direction, using a digital radiographic system. Then, root canal areas, before (filled by contrast solution) and after irrigation (remnant of contrast solution), were submitted to image subtraction with Adobe Photoshop CS4 software. Subsequently, the areas were measured by Image Tool 3.0 software, allowing the obtaining of the cleaning percentage for each modality. Data were analysed by using Anova and Tukey’s test. The level of significance was set at P < 0.05. Results: For all root canal enlargements, 30G needles (G3 e G4) presented a better cleaning efficacy. In all groups, higher cleaning efficacy percentage was observed at #30 and #40 K file enlargement. Conclusion: Regardless their design, thinner needles were more effective; a better cleaning efficacy occurred in more enlarged root canals.

Evaluación comparativa in vitro de la capacidad de sellado del sistema de conductos radiculares por diferentes técnicas

The aim of this study was to evaluate in vitro the sealing ability of the root canal using different techniques: cold lateral compaction, modified Hybrid Tagger, Thermafil and System B. Material and methods. Were used 116 human single-roots, included in resin blocks, sectioned longitudinally, attached to a device with screws and divided into four groups (n=29). After instrumentation using a bur, depression was made in each third of the root canal in each of the halves. Teeth were filled upon the different techniques. For evaluation of the quality, pictures were taken with a 1.5X magnification, photos and radiographs were utilized. After statistical analysis, were performed both macroscopic and radiographic evaluation, by Chi-square test (χ2). Results. The Thermafil technique showed better results in terms of sealing capacity, failures and homogeneity followed by modified Hybrid Tagger, the System B and cold lateral compaction. Conclusions. Thermafil was the technique that shown to be macroscopic, radiographic and homogeneously best over the other techniques evaluated in regard to the filling of the depressions made (AU)

Resolução por retratamento não cirúrgico de dente com lesão periapical: relato de caso clínico

The development and maintenance of periapical lesion occurs as a result of bacterial infection of the root canal system. Faced with the failure of endodontic treatment, retreatment is the first option with great potential for success, when performed with proper disinfection of the root canal system. Case report: Patient aged 39 years needing dental care show at clinical examination moderate gingival bleeding in the region of tooth 22 and the presence of radiographic periapical bone rarefaction due to unsatisfactory endodontic treatment. It was indicated the endodontic retreatment. We performed procedures to remove the filling material, root canal preparation using manual and mechanical techniques and completion with the use of root canal medication based on calcium hydroxide. After root canal filling, clinical and radiographic success were demonstrated for the case. Conclusion: We conclude that the non-surgical retreatment with disinfection and proper use of medication to the base of calcium hydroxide promoted success after outcome monitoring for 2 years and 8 months (AU)

Filling of simulated lateral canals with gutta percha or resilon when using thermomechanical compaction

Aims: To evaluate the filling of simulated lateral canals with gutta-percha or Resilon when using thermomechanical compaction. Setting and Design: Forty-five human single-rooted teeth were subjected to tooth decalcification and clearing. Materials and Methods: After root canal preparation, artificial lateral canals were made at 2, 5, and 8 mm from the working length (WL), corresponding to the apical, middle, and cervical thirds, respectively. The specimens were divided (n = 15) according to the filling material: Dentsply gutta-percha (GD), Odous gutta-percha (GO), and Resilon cones (RE). Root canals were obturated by thermomechanical compaction using a #45 compactor and no sealer. Lateral canals were analyzed by digital radiography and digital images after tooth decalcification and clearing using the Image Tool software. Statistical Analysis Used: Data were subjected to the Kruskal-Wallis and Dunn tests at 5% significance. Results: In the coronal third, RE and GO presented more filling ability than GD (P < 0.05). In the middle and apical thirds, RE presented the best results. Conclusions: Resilon demonstrated filling ability as material for root canal obturation by using thermomechanical compaction.

Influence of the gutta-percha taper and finger spreader on lateral consensation effectiveness

Introduction: Lateral condensation effectiveness may be influenced by the gutta-percha and finger spreader taper used during root canal obturation. Objective: To evaluate the penetration ability of finger spreader into simulated root canals prepared using MTwo rotary system and filled with different gutta-percha and finger spreader tapers. Material and methods: Resin blocks with curved root canals had the apical diameter enlarged up to #25.06 and distributed into groups (n = 6) according to the gutta-percha taper (#25.02, #25.04, and #25.06) and the finger spreader (#30 and #35 NiTi, and stainless steel B) used to perform cold lateral condensation. After applying a load of 1.5 Kg over the finger spreaders’ head, the distance between the finger spread tip and the apical limit of the root canal preparation were obtained. The data were submitted to Anova and Tukey-Krammer’s test, with 5% of significance. Results: The gutta-percha cones with 0.02 taper enabled higher finger spreader penetration when compared to 0.04 and 0.06 tapers (p < 0.05), which were similar between each other (p > 0.05), regardless of the type and diameter of the finger spreader used. When different finger spreaders were compared among themselves, stainless steel B showed higher penetration ability (p < 0.05). Conclusion: It was concluded that the stainless-steel finger spreaders showed superior penetration ability and gutta-percha with lower tapers enabled a more effective lateral condensation at the apical third.

Dentinogenesis imperfecta type II: approach for dental treatment

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effectiveness of gutta-percha and Resilon in filling lateral root canals using thermomechanical technique

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)