The Graphic Designer as (a)Digital Nomad : A qualitative study

Syftet med denna studie var att undersöka hur digitala nomader utövar sitt yrke som grafiska designers, varför de valde att bli digitala nomader samt vilka fördelar och nackdelar som finns. Totalt intervjuades 10 före detta och nuvarande digitala nomader via email och svaren sammanställdes och analyserades för att finna teman och sammanhang. Resultatet visar att deltagarna valde en digital nomadisk livsstil främst på grund av den frihet det innebär. De är även helt beroende av internet, då det är den grundläggande teknologin som möjliggör distansarbete. Att vara digital nomad verkar inte ha en negativ inverkan på den grafiska designprocessen och alla verktyg som behövs anser de finns tillgängliga digitalt. Den del av det traditionella designyrket på en byrå som deltagarna i studien saknade mest var kreativa diskussioner med kollegor.

Demonstration of Solar Heating and Cooling System using Sorption Integrated Solar Thermal Collectors

Producing cost-competitive small and medium-sized solar cooling systems is currently a significant challenge. Due to system complexity, extensive engineering, design and equipment costs; the installation costs of solar thermal cooling systems are prohibitively high. In efforts to overcome these limitations, a novel sorption heat pump module has been developed and directly integrated into a solar thermal collector. The module comprises a fully encapsulated sorption tube containing hygroscopic salt sorbent and water as a refrigerant, sealed under vacuum with no moving parts. A 5.6m2 aperture area outdoor laboratory-scale system of sorption module integrated solar collectors was installed in Stockholm, Sweden and evaluated under constant re-cooling and chilled fluid return temperatures in order to assess collector performance. Measured average solar cooling COP was 0.19 with average cooling powers between 120 and 200 Wm-2 collector aperture area. It was observed that average collector cooling power is constant at daily insolation levels above 3.6 kWhm-2 with the cooling energy produced being proportional to solar insolation. For full evaluation of an integrated sorption collector solar heating and cooling system, under the umbrella of a European Union project for technological innovation, a 180 m2 large-scale demonstration system has been installed in Karlstad, Sweden. Results from the installation commissioned in summer 2014 with non-optimised control strategies showed average electrical COP of 10.6 and average cooling powers between 140 and 250 Wm-2 collector aperture area. Optimisation of control strategies, heat transfer fluid flows through the collectors and electrical COP will be carried out in autumn 2014.

Globalização de capacidades tecnológicas inovadoras e o papel de subsidiárias de empresas transnacionais (ETNs) no contexto de países em desenvolvimento: a trajetória de uma empresa do setor de TIC no Brasil

This dissertation seeks to add new evidence to the international debate on globalization of innovation in the developing countries context. Globalization of innovation, in this dissertation, is defined and measured by the types, levels and rate of innovative technological capability accumulation and the underlying technological learning processes (sources of capabilities) at the firm level in late-industrializing countries ¿ or developing countries. This relationship is examined within a large transnational corporation (TNC) subsidiary of the information and communication technology (ICT) sector in Brasil: Motorola do Brasil during over the period from 1996 to 2006. In the international literature there is a strong debate on the extent to which innovative technological capabilities have been spreading internationally. But, the most of the studies are focused on early industrialized countries. In other words, there is still a scarcity of analysis, mainly at the firm level, from the perspective of developing countries. This dissertation supports itself in analytical basis developed in the international literature on accumulation of technological capabilities and learning in the context of developing countries. The learning processes examined in this dissertation are: (i) intra-firm learning processes; (ii) inter-firm learning processes (links between mother and sister companies); and (iii) links between the firm and other organizations of the innovation system (universities, research institutes, among others). Based on first-hand empirical evidence, qualitative and quantitative, collected on the basis of extensive fieldwork, this dissertation examines these issues with adequate level of detail and depth, in this large company in Brazil. The study results suggest that: Concerning the path of the technological capability accumulation, the firm exhibited heterogeneity in the path of accumulation of technological capabilities to distinct functions. For the functions Software Engineering and Process and Management Project the firm reached the Level 6 (Innovative Intermediate Superior), on a scale that ranges from 1 to 7; In relation to technological capability sources, the firm deliberately sought and built sources of knowledge in order to develop and sustain its innovative technological capabilities. The dissertation, thus, contributes to adding new empirical evidence to the debate on globalization of innovative capabilities from a late-industrializing perspective.

Globalização de capacidades tecnológicas inovadoras e o papel de subsidiárias de empresas transnacionais( ETNs) No contexto de países em desenvolvimento: a trajetória de uma empresa do setor de TIC no Brasil

This dissertation seeks to add new evidence to the international debate on globalization of innovation in the developing countries context. Globalization of innovation, in this dissertation, is defined and measured by the types, levels and rate of innovative technological capability accumulation and the underlying technological learning processes (sources of capabilities) at the firm level in late-industrializing countries ¿ or developing countries. This relationship is examined within a large transnational corporation (TNC) subsidiary of the information and communication technology (ICT) sector in Brasil: Motorola do Brasil during over the period from 1996 to 2006. In the international literature there is a strong debate on the extent to which innovative technological capabilities have been spreading internationally. But, the most of the studies are focused on early industrialized countries. In other words, there is still a scarcity of analysis, mainly at the firm level, from the perspective of developing countries. This dissertation supports itself in analytical basis developed in the international literature on accumulation of technological capabilities and learning in the context of developing countries. The learning processes examined in this dissertation are: (i) intra-firm learning processes; (ii) inter-firm learning processes (links between mother and sister companies); and (iii) links between the firm and other organizations of the innovation system (universities, research institutes, among others). Based on first-hand empirical evidence, qualitative and quantitative, collected on the basis of extensive fieldwork, this dissertation examines these issues with adequate level of detail and depth, in this large company in Brazil. The study results suggest that: Concerning the path of the technological capability accumulation, the firm exhibited heterogeneity in the path of accumulation of technological capabilities to distinct functions. For the functions Software Engineering and Process and Management Project the firm reached the Level 6 (Innovative Intermediate Superior), on a scale that ranges from 1 to 7; In relation to technological capability sources, the firm deliberately sought and built sources of knowledge in order to develop and sustain its innovative technological capabilities. The dissertation, thus, contributes to adding new empirical evidence to the debate on globalization of innovative capabilities from a late-industrializing perspective.

Processos de aprendizagem e suas influências sobre a acumulação de competência tecnológica : o caso da Empresa Enxuta Industrial Ltda.

Esta dissertação é um estudo de caso sobre aprendizagem tecnológica que, considerando as evidências empíricas descritas no Capítulo 6 e à luz da Tabela 3.1, procurou identificar a trajetória de acumulação de competência tecnológica da Enxuta Industrial Ltda., ao longo do período estudado (1980 - 2000), para as funções tecnológicas de investimentos (decisão e controle sobre a planta e engenharia de projetos), de processos e organização da produção, de produtos e de equipamentos. Para construir a estrutura de competências tecnológicas para a indústria de eletrodomésticos foi utilizada a estrutura desenvolvida por Figueiredo (2000). Por outro lado, considerando as evidências empíricas descritas no Capítulo 7 e à luz da Tabela 3.2, procurou-se identificar a influência dos processos de aprendizagem utilizados pela empresa sobre a sua trajetória de acumulação de competência tecnológica. Os processos de aprendizagem são avaliados à luz de quatro características chave: variedade, intensidade, funcionamento e interação, a partir do uso da estrutura desenvolvida por Figueiredo (2000). Este estudo verificou que o modo e a velocidade de acumulação de competência tecnológica na Enxuta Industrial Ltda. foram influenciados pelos processos e mecanismos de aprendizagem usados para adquirir conhecimento tecnológico e convertê-lo em organizacional. Estes processos e mecanismos de aprendizagem propiciaram a empresa alcançar uma maior velocidade na acumulação de capacidades tecnológicas, quando de sua entrada na indústria de eletrodomésticos, o que proporcionou alcançar o desenvolvimento tecnológico necessário para atuar nesta indústria. Porém, a simples incidência desses processos na empresa não garantiu uma implicação positiva para a acumulação de competência tecnológica. Pois, no período de 1991 - 1995, verificou-se a deterioração do funcionamento dos processos de aprendizagem utilizados na empresa, o que pode ter influenciada negativamente a repetibilidade e a interação daqueles processos. Isto parece ter contribuído para que a empresa falhasse em construir e acumular competências tecnológicas inovadoras naquele período. Através do uso de estrutura existente na literatura, aplicada a uma indústria diferente de estudos anteriores, esta dissertação sugere que deve existir um esforço organizado, contínuo e integrado para a geração e disseminação de conhecimento tecnológico na empresa, o que pode acelerar a acumulação de competências tecnológicas, desta forma propiciando à empresa a construção de uma trajetória de aproximação da fronteira de desenvolvimento tecnológica da indústria.

Política habitacional em zonas urbanas: o caso do conjunto habitacional Vila da Barca, em Belém

o presente estudo é o resultado da pesquisa feita durante o Mestrado em Gestão Empresarial da Escola de Administração Pública e de Empresas, da Fundação Getúlio Vargas. Este trabalho buscou compreender a produção espacial da cidade de Belém, precisamente sobre a Vila da Barca, situada às margens da Baia do Guajará, região que teve alguns de seus moradores remanejados para o Projeto de Habitação e Urbanização do local como parte da política pública habitacional da área, realizada pelo Governo Municipal em parceria com o Governo Federal. Este projeto habitacional é gerenciado pela Secretaria Municipal de Habitação - SEHAB. O objetivo principal deste estudo voltou-se para a avaliação do Projeto de Habitação da Vila da Barca no sentido de identificar como se efetivou o processo de concepção, remanejamento e reinstalação das famílias do setor analisado. Além disso, buscou-se conhecer o que foi feito em relação ao desenvolvimento desse espaço urbano. A metodologia se desenvolveu em duas fases: aplicação de questionários aos moradores e, de entrevistas aos técnicos envolvidos (Gerente de Desenvolvimento Urbano (GIDUR); Técnico Social e Engenheiro, funcionários da Caixa Econômica Federal em Belém). A pesquisa procurou demonstrar a opinião dos envolvidos no processo de efetivação dessa política pública, compreender a produção desse espaço urbano em suas diferentes dimensões e perceber os aspectos positivos e negativos do projeto, verificando alguns elementos de construção desse espaço. Como conclusão, percebe-se que é preciso construir formas atuais eficazes de exercer por parte da sociedade o controle social sobre o poder do Estado e sobre os mecanismos que controlam o mercado. Esse é o desafio maior da contemporaneidade

A organização social e o acesso à cultura: o caso das bibliotecas parque do Estado do Rio de Janeiro

Esta dissertação procura analisar qual a contribuição das Organizações Sociais para o acesso a direitos culturais, a partir da experiência das Bibliotecas Parque do Estado do Rio de Janeiro, em especial a de Manguinhos e a da Rocinha. Ciente de que as formas de cooperação para a efetivação de direitos culturais são múltiplas e que precisam ser pensadas a partir da inter-relação de vários atores e aspectos, todas invariavelmente necessitam desaguar em molduras de gestão viabilizadoras do acesso à cultura. A pesquisa adota o método do estudo de caso, valendo-se de pesquisas bibliográfica, documental e de campo. Apresenta o cenário de construção dos direitos culturais, em larga expansão no Brasil, e destaca que, para materializá-los, torna-se necessário estudar, avaliar e adotar modelos organizacionais alternativos aos tradicionais que caracterizam a administração pública direta e indireta. Aborda o campo da gestão e dos direitos culturais no contexto das três principais reformas do aparelho do Estado Republicano, ocorridas nas décadas de 30, 60 e 90, com ênfase na última, que incorpora a teoria da Nova Gestão Pública, base desta dissertação. Focaliza a Organização Social como modelo opcional à gestão de instituições ou programas culturais, a partir da realidade existente, das motivações, das vantagens e das perspectivas e aduz uma narrativa acerca do processo de concepção da legislação do estado do Rio de Janeiro. Verifica como surgiram esses equipamentos culturais e como se deu a formação da rede de Bibliotecas Parque. Descreve o processo de implantação das Organizações Sociais de Cultura no estado e apresenta o gestor das bibliotecas e sua relação com a secretaria de Cultura. Conclui que há necessidade de aperfeiçoamento de mecanismos de gestão, a fim de que o modelo possa, de fato, oferecer contribuição para o acesso a direitos culturais.

Modos projetuais de simulação: uso de ferramentas de simulação térmica no processo projetual de arquitetura

This thesis aims to describe and demonstrate the developed concept to facilitate the use of thermal simulation tools during the building design process. Despite the impact of architectural elements on the performance of buildings, some influential decisions are frequently based solely on qualitative information. Even though such design support is adequate for most decisions, the designer will eventually have doubts concerning the performance of some design decisions. These situations will require some kind of additional knowledge to be properly approached. The concept of designerly ways of simulating focuses on the formulation and solution of design dilemmas, which are doubts about the design that cannot be fully understood nor solved without using quantitative information. The concept intends to combine the power of analysis from computer simulation tools with the capacity of synthesis from architects. Three types of simulation tools are considered: solar analysis, thermal/energy simulation and CFD. Design dilemmas are formulated and framed according to the architect s reflection process about performance aspects. Throughout the thesis, the problem is investigated in three fields: professional, technical and theoretical fields. This approach on distinct parts of the problem aimed to i) characterize different professional categories with regards to their design practice and use of tools, ii) investigate preceding researchers on the use of simulation tools and iii) draw analogies between the proposed concept, and some concepts developed or described in previous works about design theory. The proposed concept was tested in eight design dilemmas extracted from three case studies in the Netherlands. The three investigated processes are houses designed by Dutch architectural firms. Relevant information and criteria from each case study were obtained through interviews and conversations with the involved architects. The practical application, despite its success in the research context, allowed the identification of some applicability limitations of the concept, concerning the architects need to have technical knowledge and the actual evolution stage of simulation tools

Do modelo geométrico ao modelo físico: o tridimensional na educação do arquiteto e urbanista

In the teaching practice of architecture and urbanism in Brazil, educational legislation views modeling laboratories and workshops as an indispensable component of the infrastructure required for the good functioning of any architectural course of study. Although the development of information technology at the international level has created new possibilities for digital production of architectural models, research in this field being underway since the early 1990s, it is only from 2007 onwards that such technologies started to be incorporated into the teaching activity of architecture and urbanism in Brazil, through the pioneering experience at LAPAC/FEC/UNICAMP. It is therefore a recent experiment whose challenges can be highlighted through the following examples: (i) The implementation of digital prototyping laboratories in undergraduate courses of architecture and urbanism is still rare in Brazil; (ii) As a new developing field with few references and application to undergraduate programs, it is hard to define methodological procedures suitable for the pedagogical curricula already implemented or which have already been consolidated over the years; (iii) The new digital ways for producing tridimensional models are marked with specificities which make it difficult to fit them within the existing structures of model laboratories and workshops. Considering the above, the present thesis discusses the tridimensional model as a tool which may contribute to the development of students skills in perceiving, understanding and representing tridimensional space. Analysis is made of the relation between different forms of models and the teaching of architectural project, with emphasis on the design process. Starting from the conceptualization of the word model as it is used in architecture and urbanism, an attempt is made to identify types of tridimensional models used in the process of project conception, both through the traditional, manual way of model construction as well as through the digital ones. There is also an explanation on how new technologies for digital production of models through prototyping are being introduced in undergraduate academic programs of architecture and urbanism in Brazil, as well as a review of recent academic publications in this area. Based on the paradigm of reflective practice in teaching as designed by Schön (2000), the experiment applied in the research was undertaken in the integrated workshop courses of architectural project in the undergraduate program of architecture and urbanism at Universidade Federal do Rio Grande do Norte. Along the experiment, physical modeling, geometric modeling and digital prototyping are used in distinct moments of the design process with the purpose of observing the suitability of each model to the project s phases. The procedures used in the experiments are very close to the Action Research methodology in which the main purpose is the production of theoretical knowledge by improving the practice. The process was repeated during three consecutive semesters and reflection on the results which were achieved in each cycle helped enhancing the next one. As a result, a methodological procedure is proposed which consists of the definition of the Tridimensional Model as the integrating element for the contents studied in a specific academic period or semester. The teaching of Architectural Project as it is developed along the fifth academic period of the Architecture and Urbanism undergraduate program of UFRN is taken as a reference

O projeto de arquitetura de espaços temporários com o uso de sistema construtivo remontável: um estudo exploratório

The purpose of this research is to study the portable or reassemblable architectures, which, different from conventional architecture (whose designs are of permanent buildings), corresponds to the designing of spaces with temporary purposes. The focus of the study is the architectural design of spaces that are produced from building systems that can to be moved to different places (process of assembly / disassembly / reassembly) in order to identify the types of spaces generated and the processes used in their design / projecting. The aim is to investigate relationships between the initial project conceived based on a Reassemblable Construction System (RCS) and its application in the architectural design of professionals and students in order to contribute to the understanding of the specificities of this type of design activity. To this end it was developed the exploratory research based on multimedia methods, which includes: documentary analysis, technical visits, interviews, surveys, academic exercise and documentation by images. Although the study is not conclusive, the results indicate significant differences between the point of view of the RCS´s designers and its users (architects and architecture students) since the users demonstrated to have some difficulty to access the features provided for the first group, in particular the students. It is also demonstrated that the use of RCSs seems to change the appreciation / hierarchization of the conditions of project design, since, unlike what happens in traditional architectural design, the designers who use them seem to be more concerned with constructive issues, especially the structural elements (support and covering), instead of functionality, aesthetics and even physical characteristics of the site

A influência de decisões arquitetônicas na eficiência energética do Campus vol. 1/UFRN

Building design is an effective way to achieve HVAC energy consumption reduction. However, this potentiality is often neglected by architects due to the lack of references to support design decisions. This works intends to propose architectural design guidelines for energy efficiency and thermal performance of Campus/UFRN buildings. These guidelines are based on computer simulations results using the software DesignBuilder. The definition of simulation models has begun with envelope variables, partially done after a field study of thirteen buildings at UFRN/Campus. This field study indicated some basic envelope patterns that were applied in simulation models. Occupation variables were identified with temperature and energy consumption monitoring procedures and a verification of illumination and equipment power, both developed at the Campus/UFRN administration building. Three simulation models were proposed according to different design phases and decisions. The first model represents early design decisions, simulating the combination of different types of geometry with three levels of envelope thermal performance. The second model, still as a part of early design phase, analyses thermal changes between circulation halls lateral and central and office rooms, as well as the heat fluxes and monthly temperatures in each circulation hall. The third model analyses the influence of middle-design and detail design decisions on energy consumption and thermal performance. In this model, different solutions of roofs, shading devices, walls and external colors were simulated. The results of all simulation models suggest a high influence of thermal loads due to the incidence of solar radiation on windows and surfaces, which highlights the importance of window shading devices, office room orientation and absorptance of roof and walls surfaces

Análise de métodos de predição de conforto térmico de habitação em clima quente-úmido com condicionamento passivo

The assessment of building thermal performance is often carried out using HVAC energy consumption data, when available, or thermal comfort variables measurements, for free-running buildings. Both types of data can be determined by monitoring or computer simulation. The assessment based on thermal comfort variables is the most complex because it depends on the determination of the thermal comfort zone. For these reasons, this master thesis explores methods of building thermal performance assessment using variables of thermal comfort simulated by DesignBuilder software. The main objective is to contribute to the development of methods to support architectural decisions during the design process, and energy and sustainable rating systems. The research method consists on selecting thermal comfort methods, modeling them in electronic sheets with output charts developed to optimize the analyses, which are used to assess the simulation results of low cost house configurations. The house models consist in a base case, which are already built, and changes in thermal transmittance, absorptance, and shading. The simulation results are assessed using each thermal comfort method, to identify the sensitivity of them. The final results show the limitations of the methods, the importance of a method that considers thermal radiance and wind speed, and the contribution of the chart proposed

Todo Brasileiro merece nível A : habitação multifamiliar para o programa minha casa minha vida energeticamente eficiente

This thesis describes the theoretical, methodological and programmatic proposal for a multifamily residential building located in the urban expansion area of Parnamirim/RN, inserted in the program Minha Casa Minha Vida and level of energy efficiency "A", as the RegulamentoTécnico de Qualidade (RTQ-R/INMETRO) for residential buildings. The development project initially consists of procedures as the study of theoretical, architectural programming and cases studies. With the delimitation of a field solution, situated between the reference and the context, proposals are studied to determine the solution and architectural detailing of the proposal. The architectural program was built based on the method of Problem Seeking (Peña and Parshall, 2001) and research has highlighted aspects of reducing the environmental impact and of the program Minha Casa Minha Vida , among others. The design process was characterized by the incorporation of aspects reviewed and programmed, seeking them compatible and have an economically viable building, socio-spatial quality and energy efficient. The results show that it is possible to obtain a building that meets the constraints of the program that provides housing and energy efficiency level A - and many other environmental qualities and constructive, particularly through architectural design

A organização do processo de projeto de arquitetura no meio profissional: uma análise da produção em escritórios

This paper examines, through case studies, the organization of the production process of architectural projects in architecture offices in the city of Natal, specifically in relation to building projects. The specifics of the design process in architecture, the production of the project in a professional field in Natal, are studied in light of theories of design and its production process. The survey, in its different phases, was conducted between March 2010 and September 2012 and aimed to identify, understand, and analyze comparatively, by mapping the design process, the organization of production of building projects in two offices in Natal, checking as well the relationships of their agents during the process. The project was based on desk research and exploration, adopting, for both, data collection tools such as forms, questionnaires, and interviews. With the specific aim of mapping the design process, we adopted a technique that allows obtaining the information directly from employee agents involved in the production process. The technique consisted of registering information by completing daily, during or at the end of the workday, an individual virtual agenda, in which all agent collaborators described the tasks performed. The data collected allowed for the identification of the organizational structure of the office, its hierarchy, the responsibilities of agents, as well as the tasks performed by them during the two months of monitoring at each office. The research findings were based on analyses of data collected in the two offices and on comparative studies between the results of these analyses. The end result was a diagnostic evaluation that considered the level of organization and elaborated this perspective, as well as proposed solutions aimed at improving both the organization of the process and the relationships between the agents under the lens analyzed

A produção do mobiliário urbano nos espaços públicos :o desenho do mobiliário urbano nos projetos de reordenamento das orlas do Rio Grande do Norte

This work aims to analyze and evaluate the Urban furniture designed to public areas according to the Revitalization planning for Rio Grande do Norte coastland, defining visual relations among urban elements in the landscape of revitalized public urban areas with cultural, paisagistic and touristic values and the design process used for developing urban furniture to those areas, observing the incoming consequences use to that process in a specific urban context which alters use, functions, cultural images as well as social values attributed to each particular place. Environmental perceptions, legibility of local cultural references and their representation through the design of urban elements, act in a positive or negative manner over the inhabitants cognition process of some particular revitalized area, determining new use and attributions to those areas. Designs for coastal urban interventions try excessively to standardize technical media, construction materials and planning configurations, creating artificial sceneries that segregates users, imposing new structures and usage, generating, consequently, the so called non-places and burlesque regionalism. The research is divided into 4 chapters: 1) Theoretical support (Industrial design; Urban furniture; Public urban spaces; Urban image and environmental perception; Urban occupation and interventions in coastland areas); 2) Methodological procedures and data collection; 3) Analysis of Rio Grande do Norte coastal areas and their urban interventions; 4) Final considerations and Industrial Design contributions to the subject