Resíduos da indústria pesqueira na indução de supressividade a Cylindrocladium spathiphylli e Ralstonia solanacearum e de biofertilizantes no controle de oídios

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Cultivo de larvas de Ucides cordatus (LINNAEU, 1763) sob diferentes intensidades luminosas

O caranguejo-uçá, Ucides cordatus, é uma espécie típica dos manguezais brasileiros e tem grande importância econômica para as populações litorâneas tradicionais. O presente trabalho investigou a influência da intensidade luminosa sobre a sobrevivência e a taxa de desenvolvimento larval de U. cordatus. Três intensidades luminosas foram avaliadas: claro - 710 lux, penumbra - 210 lux e escuro - 1 lux, em duas condições de cultivo, individual e coletivo. Houve diferenças significativas entre as taxas de sobrevivência das larvas zoea e as três intensidades luminosas avaliadas (p<0,05). As maiores taxas de ecdise para o estágio de megalopa foram obtidas no tratamento claro (42% nos cultivos coletivos e 30% nos cultivos individuais). No tratamento escuro, a metamorfose para megalopa foi de apenas 16% nos cultivos coletivos e de 7% nos cultivos individuais. Estes resultados indicam que a manutenção das larvas em baixas intensidades luminosas afeta negativamente a sobrevivência larval de U. cordatus.

Processing and characterization of extruded breakfast meal formulated with broken rice and bean flour

O objetivo deste trabalho foi elaborar um produto matinal extrusado de quirera de arroz e bandinha de feijão, além de verificar a influência do processo de extrusão nas suas características físico-químicas, nutricionais, tecnológicas e sensoriais. O produto final apresentou teor considerável de proteínas (9,9 g.100 g^-1), podendo ser considerado uma boa fonte desse nutriente para crianças e adolescentes. Para a fibra alimentar, observou-se teor de 3,71 g.100 g^-1 do produto pronto para o consumo. Dessa forma, o floco matinal de arroz e feijão pode receber a alegação de alimento fonte de fibras, de acordo com a legislação brasileira. Com relação às propriedades tecnológicas, o extrusado estudado apresentou índice de expansão de 8,89 e densidade aparente de 0,25 g.cm^-3. Quanto à análise sensorial, o floco matinal avaliado obteve notas médias de aceitação, situadas no intervalo de 6,8 a 7,7, que corresponde às categorias "gostei ligeiramente" e "gostei muito". Para a intenção de compra, 79% dos provadores opinaram que certamente ou possivelmente comprariam o produto. O emprego de quirera de arroz e bandinha de feijão é uma interessante alternativa para a elaboração de produto matinal extrusado, apresentando boas qualidades de ordem nutricional, tecnológica e sensorial.

Resistência do mexilhão Perna perna (Linnaeus, 1758) proveniente de bancos naturais da baixada santista, a variações de temperatura, salinidade, tempo de exposição ao ar e determinação da incidência de parasitismo

Pós-graduação em Ciências Biológicas (Zoologia) - IBRC

Plantas hortícolas dos quintais e sua importância para as famílias do assentamento Pirituba II , Itapeva/Itaberá,SP

Pós-graduação em Agronomia (Horticultura) - FCA

Análise microbiológica e físico-química de material proteico comestível derivado do processamento da gordura oriunda do abate de bovinos

Background: The use of all by-products of bovine slaughter is of high economic importance for the industries of products of animal origin. Among these products, fat has an important role, once fat rendering may generate several different products, such as protein material that may be used in the manufacture of meat products. However, in spite of the importance that the use of all by-products has for the economic balance of the industry, there are no reports on their use in Brazil, or studies that supply data on microbiological and physical-chemical local standards for this protein. Thus, the objective of this study was to evaluate microbiological and physical-chemical characteristics of protein material obtained from fat rendering, as well as to provide support for companies to use fat rendering to generate protein material, adding value to industrialized meat products.Materials, Methods & Results: The experimental production of edible protein obtained of fat rendering was conducted in slaughterhouse with supervision of the Brazilian Ministry of Agriculture, Livestock and Food Supply. Protein material was obtained in a continuous, humid heat system at high temperatures. Fat scraps containing protein were ground and cooked at high temperature (85 degrees C), and placed in a three phase decanter centrifuge. After centrifugation, protein material was ground again and packed. Samples were collected from 15 batches of protein material, and the following microbiological analyses were carried out: counts of aerobic mesophilic and psychrotrophic microorganisms, coliforms at 35 degrees C, Escherichia coli, sulfite-reducing Clostridium, and Staphylococcus aureus, besides presence or absence of Salmonella and Listeria monocytogens. The following physical-chemical analyses were also carried out: protein, total lipid, moisture, ash, carbohydrate, and energy content. Mean counts of mesophiles, psychrotrophs, and coliforms at 35 degrees C were 4.17; 3.69 and 1.87 (log CFU/g), respectively. Levels of protein, total lipids, moisture, ashes and carbohydrates were 27.50; 7.83; 63.88%; 0.24%; and 0.55%, respectively, and energy content was 182.63 kcal/100g.Discussion: Results of microbiological analyses demonstrated that, although low, the final product showed to be contaminated. Contamination that occurred during the second grinding procedure may be an explanation for these bacterial counts. Also, the temperature used for fat fusion was not enough to eliminate thermoduric microorganisms. However, even with the presence of indicator microorganisms in the samples, none was contaminated by E. coli, sulfite-reducing Clostridium, S. aureus, Salmonella or L. monocytogenes. Physical-chemical analyses showed that the product had adequate nutritional quality. Based on these results, it was possible to conclude that protein material obtained in fat rendering showed characteristics that enable the use of this product as raw material for processed meat products. Besides, the present study was the first one to present scientific results in relation to edible by-products obtained in fat rendering, supplying important information for slaughterhouses and meat-processing plants. The study also produced relevant data on the innocuousness of the product, which may be used to guide decision-making of health inspectors.

Ecological relevance of sentinels' biomarker responses: A multi-level approach

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uso de resíduos de madeiras e frutos da amazônia para o cultivo in vitro do cogumelo comestível shiitake

Local abundant residues with low or without commercial value with potential to make the production of edible mushrooms economically viable in any region of Brazil must be employed for cultivation. Thus, the radial mycelial growth of LED 20 strain of Lentinula edodes (Berk.) Pegler was verified in culture media prepared with extract of regional residues by using substrates based on Protium puncticulatum, Cariniana micrantha and Caryocar glabum sawdust, supplemented with 20% of grinded residues from the barks of the fruits of Astrocaryum aculeatum and Theobroma grandiflorum. Residues from eucalyptus (Eucalyptus spp) sawdust and wheat bran (Triticum aestivum L) were used as witness because they are commonly used in the cultivation of L. edodes. The experimental design used was totally randomized, in 4x3 factorial scheme, totalizing 12 treatments with five repetitions, being that each repetition corresponded to a Petri dish, adding up a total of 60 dishes, which were incubated under 25 degrees C. The diameter of the colony was daily evaluated during seven days of incubation. After that period, it was verified that media prepared with P. puncticulatum extract, whose supplementation with both brans was favorable for fungic development, presented some of the highest averages of mycelial growth of LED 20 strain of L. edodes, confirming the potential of those residues.

Características morfométricas, rendimentos no processamento e composição centesimal da carne do barbado

This study was carried out to evaluate the morphometric characteristics, the yield and the centesimal composition of different cuts of the Barbado's (Pinirampus pirinampu) flesh, captured in the Itaipu Reservoir. Were used 55 animals randomly distributed into three classes of body weight [less than 620 g (n = 15), between 620 and 1.120 g (n = 16) and greater than de 1.120 g (n = 24)]. Were measured the standard length (SL), the total length (TL), the head length (HL), the head height (HH), the trunk length (TRL), the trunk height (TH) and width of the trunk (WT). Then were established the morphometric relationships: (HL/SL), (HL/HH), (SL/TL), (WT/TRL), (WT/TH) (TH/TRL). Afterwards were measured the flesh's cut yield and the residue waste yield called: trunk (TC), fillet (FILLET), abdominal fillet (AF), head (HEAD), viscera (VISC), fin, spine and skin (SKSF). The levels of moisture, ash, fat and crude protein from FILLET and AF were determined. The body weight affected (P<0.05) the WT/TRL, WT/TH, TH/TRL, TR, FILLET, HEAD and SKSF, however didn't affected the centesimal parameters. In conclusion, the Barbado (Pinirampus pirinampu) has allometric growth and the flesh processing from fishes with more than 620 g provides better yields of edible parts. In addition, the chemical composition of meat suggests its potential for use in the manufacture of artisanal or industrial products.

Evaluation of Antimicrobial Activity of Silver Nanoparticles for Carboxymethylcellulose Film Applications in Food Packaging

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Nanocompósito de polpa de mamão e nanopartículas de quitosana para aplicação em embalagens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Horse chestnut (Aesculus hippocastanum L.) starch: Basic physico-chemical characteristics and use as thermoplastic material

Starch isolated from non-edible Aesculus hippocastanum seeds was characterized and used for preparing starch-based materials. The apparent amylose content of the isolated starch was 33.1%. The size of starch granules ranged from 0.7 to 35 pm, and correlated with the shape of granules (spherical, oval and irregular). The chain length distribution profile of amylopectin showed two peaks, at polymerization degree (DP) of 12 and 41-43. Around 53% of branch unit chains had DP in the range of 11-20. A. hippocastanum starch displayed a typical C-type pattern and the maximum decomposition temperature was 317 degrees C.Thermoplastic starch (TPS) prepared from A. hippocastanum with glycerol and processed by melt blending exhibited adequate mechanical and thermal properties. In contrast, plasticized TPS with glycerol:malic acid (1:1) showed lower thermal stability and a pasty and sticky behavior, indicating that malic acid accelerates degradation of starch during processing. (C) 2014 Elsevier Ltd. All rights reserved.

Estudo da influência da adição de resíduos de óleo em concretos para aplicação em pavimentos

Pós-graduação em Engenharia Civil - FEIS

Capacidade antioxidante e compostos bioativos em hortaliças analisadas em dois períodos de cultivo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Physicochemical characterisation and radical-scavenging activity of Cucurbitaceae seed oils

Oils extracted from Cucurbitaceae seeds were characterised for their fatty acid and tocopherol compositions. In addition, some physicochemical characteristics, total phenolic contents and the radical-scavenging activities were determined. Oil content amounted to 23.9% and 27.1% in melon and watermelon seeds, respectively. Physicochemical characteristics were similar to those of other edible oils and the oils showed significant antioxidant activities. Fatty acid composition showed total unsaturated fatty acid content of 85.2–83.5%, with linoleic acid being the dominant fatty acid (62.4–72.5%), followed by oleic acid (10.8–22.7%) and palmitic acid (9.2–9.8%). The oils, especially watermelon seed oil, showed high total tocopherol and phenolic contents. The γ-tocopherol was the predominant tocopherol in both oils representing 90.9 and 95.6% of the total tocopherols in melon and watermelon seed oils, respectively. The potential utilisation of melon and watermelon seed oils as a raw material for food, chemical and pharmaceutical industries appears to be favourable.