Hemispheric processing of differently valenced and self-relevant attachment words in middle-aged married and separated individuals

The reliance in experimental psychology on testing undergraduate populations with relatively little life experience, and/or ambiguously valenced stimuli with varying degrees of self-relevance, may have contributed to inconsistent findings in the literature on the valence hypothesis. To control for these potential limitations, the current study assessed lateralised lexical decisions for positive and negative attachment words in 40 middle-aged male and female participants. Self-relevance was manipulated in two ways: by testing currently married compared with previously married individuals and by assessing self-relevance ratings individually for each word. Results replicated a left hemisphere advantage for lexical decisions and a processing advantage of emotional over neutral words but did not support the valence hypothesis. Positive attachment words yielded a processing advantage over neutral words in the right hemisphere, while emotional words (irrespective of valence) yielded a processing advantage over neutral words in the left hemisphere. Both self-relevance manipulations were unrelated to lateralised performance. The role of participant sex and age in emotion processing are discussed as potential modulators of the present findings.

Proteolytic processing of the Cyt1Ab1 toxin produced by Bacillus thuringiensis subsp. medellin

Bacillus thuringiensis produces d-endotoxins that require proteolytic processing to become active. The activation of the B. thuringiensis subsp. medellin 28 kDa (Cyt1Ab1) cytolytic toxin by trypsin, chymotrypsin and gut extract from Culex quinquefasciatus larvae was analyzed. The Cyt1Ab1 toxin of B. thuringiensis subsp. medellin was processed by all proteases tested to fragments between 23 and 25 kDa, while processing of the Cyt1Aa1 toxin produce fragments between 22.5 and 24.5 kDa. The Cyt1Ab1 toxin was preferentially processed at the alkaline pH of 12. The in vitro proteolytic processing of the Cyt1Ab1 toxin by C. quinquefasciatus larvae midgut extract showed a 25 kDa fragment; a similar result was observed when the activation was performed in the in vivo experiments. The solubilized Cyt1Ab1 toxin and the protease resistant cores generated by in vitro processing showed hemolytic activity but not mosquitocidal activity. Amino terminal sequence of the C. quinquefasciatus gut extract resistant fragment indicated that the cutting site was located between Lys31 and Asp32, with a sequence DDPNEKNNHNS; while for the trypsin-resistant fragment the cutting site was determined between Leu29 and Arg30, and for the chymotrypsin-resistant fragment between Arg30 and Lys31.

Effect of irrigation water and processing on the microbial quality of lettuces produced and sold on markets in Dakar (Senegal)

The aim of this survey is to assess the microbiological impact of irrigation water on lettuces produced on two urban agricultural sites and sold on markets; 6 and 7%, respectively, of lettuces coming from the sites of Pikine and Patte d'Oie were Salmonella spp. positive. Lettuces irrigated with shallow groundwater (''Ceanes'' water) were more contaminated (8% at both Pikine and Patte d'Oie sites) compared to those irrigated with wastewater (4% at Pikine) or well water (5% at Patte d'Oie). As for the lettuces in marketplaces, their contamination seems to depend on the type of treatment occurring before sale. Lettuces previously washed in the ``Ceanes'' were more contaminated than those rinsed with tap water at the marketplace. Salmonella spp. have been isolated from all marketplaces. However, the rates of contamination in markets surrounding Patte d'Oie are higher (9 and 11% at Grand Yoff and Dalifort) than those surrounding Pikine (4 and 2% at Zinc and Sham) or Rufisque, the control (2%). Our results confirm that the reuse of wastewater in irrigation is an alternative to animal manure. Its risk of microbial contamination can be significantly reduced by washing the vegetables with tap water before they are sold. Copyright (C) 2010 John Wiley & Sons, Ltd.

Sound objects in time, space and action

SOUND OBJECTS IN TIME, SPACE AND ACTIONThe term "sound object" describes an auditory experience that is associated with an acoustic event produced by a sound source. At cortical level, sound objects are represented by temporo-spatial activity patterns within distributed neural networks. This investigation concerns temporal, spatial and action aspects as assessed in normal subjects using electrical imaging or measurement of motor activity induced by transcranial magnetic stimulation (TMS).Hearing the same sound again has been shown to facilitate behavioral responses (repetition priming) and to modulate neural activity (repetition suppression). In natural settings the same source is often heard again and again, with variations in spectro-temporal and spatial characteristics. I have investigated how such repeats influence response times in a living vs. non-living categorization task and the associated spatio-temporal patterns of brain activity in humans. Dynamic analysis of distributed source estimations revealed differential sound object representations within the auditory cortex as a function of the temporal history of exposure to these objects. Often heard sounds are coded by a modulation in a bilateral network. Recently heard sounds, independently of the number of previous exposures, are coded by a modulation of a left-sided network.With sound objects which carry spatial information, I have investigated how spatial aspects of the repeats influence neural representations. Dynamics analyses of distributed source estimations revealed an ultra rapid discrimination of sound objects which are characterized by spatial cues. This discrimination involved two temporo-spatially distinct cortical representations, one associated with position-independent and the other with position-linked representations within the auditory ventral/what stream.Action-related sounds were shown to increase the excitability of motoneurons within the primary motor cortex, possibly via an input from the mirror neuron system. The role of motor representations remains unclear. I have investigated repetition priming-induced plasticity of the motor representations of action sounds with the measurement of motor activity induced by TMS pulses applied on the hand motor cortex. TMS delivered to the hand area within the primary motor cortex yielded larger magnetic evoked potentials (MEPs) while the subject was listening to sounds associated with manual than non- manual actions. Repetition suppression was observed at motoneuron level, since during a repeated exposure to the same manual action sound the MEPs were smaller. I discuss these results in terms of specialized neural network involved in sound processing, which is characterized by repetition-induced plasticity.Thus, neural networks which underlie sound object representations are characterized by modulations which keep track of the temporal and spatial history of the sound and, in case of action related sounds, also of the way in which the sound is produced.LES OBJETS SONORES AU TRAVERS DU TEMPS, DE L'ESPACE ET DES ACTIONSLe terme "objet sonore" décrit une expérience auditive associée avec un événement acoustique produit par une source sonore. Au niveau cortical, les objets sonores sont représentés par des patterns d'activités dans des réseaux neuronaux distribués. Ce travail traite les aspects temporels, spatiaux et liés aux actions, évalués à l'aide de l'imagerie électrique ou par des mesures de l'activité motrice induite par stimulation magnétique trans-crânienne (SMT) chez des sujets sains. Entendre le même son de façon répétitive facilite la réponse comportementale (amorçage de répétition) et module l'activité neuronale (suppression liée à la répétition). Dans un cadre naturel, la même source est souvent entendue plusieurs fois, avec des variations spectro-temporelles et de ses caractéristiques spatiales. J'ai étudié la façon dont ces répétitions influencent le temps de réponse lors d'une tâche de catégorisation vivant vs. non-vivant, et les patterns d'activité cérébrale qui lui sont associés. Des analyses dynamiques d'estimations de sources ont révélé des représentations différenciées des objets sonores au niveau du cortex auditif en fonction de l'historique d'exposition à ces objets. Les sons souvent entendus sont codés par des modulations d'un réseau bilatéral. Les sons récemment entendus sont codé par des modulations d'un réseau du côté gauche, indépendamment du nombre d'expositions. Avec des objets sonores véhiculant de l'information spatiale, j'ai étudié la façon dont les aspects spatiaux des sons répétés influencent les représentations neuronales. Des analyses dynamiques d'estimations de sources ont révélé une discrimination ultra rapide des objets sonores caractérisés par des indices spatiaux. Cette discrimination implique deux représentations corticales temporellement et spatialement distinctes, l'une associée à des représentations indépendantes de la position et l'autre à des représentations liées à la position. Ces représentations sont localisées dans la voie auditive ventrale du "quoi".Des sons d'actions augmentent l'excitabilité des motoneurones dans le cortex moteur primaire, possiblement par une afférence du system des neurones miroir. Le rôle des représentations motrices des sons d'actions reste peu clair. J'ai étudié la plasticité des représentations motrices induites par l'amorçage de répétition à l'aide de mesures de potentiels moteurs évoqués (PMEs) induits par des pulsations de SMT sur le cortex moteur de la main. La SMT appliquée sur le cortex moteur primaire de la main produit de plus grands PMEs alors que les sujets écoutent des sons associée à des actions manuelles en comparaison avec des sons d'actions non manuelles. Une suppression liée à la répétition a été observée au niveau des motoneurones, étant donné que lors de l'exposition répétée au son de la même action manuelle les PMEs étaient plus petits. Ces résultats sont discuté en termes de réseaux neuronaux spécialisés impliqués dans le traitement des sons et caractérisés par de la plasticité induite par la répétition. Ainsi, les réseaux neuronaux qui sous-tendent les représentations des objets sonores sont caractérisés par des modulations qui gardent une trace de l'histoire temporelle et spatiale du son ainsi que de la manière dont le son a été produit, en cas de sons d'actions.

Inhibition of the polymerase chain reaction by sputum samples from tuberculosis patients after processing using a silica-guanidiniumthiocyanate DNA isolation procedure

With the objective to evaluate PCR-mediated detection of Mycobacterium tuberculosis DNA as a diagnostic procedure for diagnosis of tuberculosis in individuals attending ambulatory services in Primary Health Units of the City Tuberculosis Program in Rio de Janeiro, Brazil, their sputum samples were collected and treated with a DNA extraction procedure using silica-guanidiniumthiocyanate. This procedure has been described to be highly efficient for extraction of different kind of nucleic acids from bacteria and clinical samples. Upon comparing PCR results with the number of acid-fast bacilli, no direct relation was observed between the number of bacilli present in the sample and PCR positivity. Part of the processed samples was therefore spiked with pure DNA of M. tuberculosis and inhibition of the PCR reaction was verified in 22 out of 36 (61%) of the samples, demonstrating that the extraction procedure as originally described should not be used for PCR analysis of sputum samples.

RADIC: un middleware de tolerancia a fallos que preserva el rendimiento

La tolerancia a fallos es una línea de investigación que ha adquirido una importancia relevante con el aumento de la capacidad de cómputo de los súper-computadores actuales. Esto es debido a que con el aumento del poder de procesamiento viene un aumento en la cantidad de componentes que trae consigo una mayor cantidad de fallos. Las estrategias de tolerancia a fallos actuales en su mayoría son centralizadas y estas no escalan cuando se utiliza una gran cantidad de procesos, dado que se requiere sincronización entre todos ellos para realizar las tareas de tolerancia a fallos. Además la necesidad de mantener las prestaciones en programas paralelos es crucial, tanto en presencia como en ausencia de fallos. Teniendo en cuenta lo citado, este trabajo se ha centrado en una arquitectura tolerante a fallos descentralizada (RADIC – Redundant Array of Distributed and Independant Controllers) que busca mantener las prestaciones iniciales y garantizar la menor sobrecarga posible para reconfigurar el sistema en caso de fallos. La implementación de esta arquitectura se ha llevado a cabo en la librería de paso de mensajes denominada Open MPI, la misma es actualmente una de las más utilizadas en el mundo científico para la ejecución de programas paralelos que utilizan una plataforma de paso de mensajes. Las pruebas iniciales demuestran que el sistema introduce mínima sobrecarga para llevar a cabo las tareas correspondientes a la tolerancia a fallos. MPI es un estándar por defecto fail-stop, y en determinadas implementaciones que añaden cierto nivel de tolerancia, las estrategias más utilizadas son coordinadas. En RADIC cuando ocurre un fallo el proceso se recupera en otro nodo volviendo a un estado anterior que ha sido almacenado previamente mediante la utilización de checkpoints no coordinados y la relectura de mensajes desde el log de eventos. Durante la recuperación, las comunicaciones con el proceso en cuestión deben ser retrasadas y redirigidas hacia la nueva ubicación del proceso. Restaurar procesos en un lugar donde ya existen procesos sobrecarga la ejecución disminuyendo las prestaciones, por lo cual en este trabajo se propone la utilización de nodos spare para la recuperar en ellos a los procesos que fallan, evitando de esta forma la sobrecarga en nodos que ya tienen trabajo. En este trabajo se muestra un diseño propuesto para gestionar de un modo automático y descentralizado la recuperación en nodos spare en un entorno Open MPI y se presenta un análisis del impacto en las prestaciones que tiene este diseño. Resultados iniciales muestran una degradación significativa cuando a lo largo de la ejecución ocurren varios fallos y no se utilizan spares y sin embargo utilizándolos se restablece la configuración inicial y se mantienen las prestaciones.

Design of Novel Frequency Generation Circuit with Application to Ultra-Wideband Distributed Oscillators

Given the urgence of a new paradigm in wireless digital trasmission which should allow for higher bit rate, lower latency and tigher delay constaints, it has been proposed to investigate the fundamental building blocks that at the circuital/device level, will boost the change towards a more efficient network architecture, with high capacity, higher bandwidth and a more satisfactory end user experience. At the core of each transciever, there are inherently analog devices capable of providing the carrier signal, the oscillators. It is strongly believed that many limitations in today's communication protocols, could be relieved by permitting high carrier frequency radio transmission, and having some degree of reconfigurability. This led us to studying distributed oscillator architectures which work in the microwave range and possess wideband tuning capability. As microvave oscillators are essentially nonlinear devices, a full nonlinear analyis, synthesis, and optimization had to be considered for their implementation. Consequently, all the most used nonlinear numerical techniques in commercial EDA software had been reviewed. An application of all the aforementioned techniques has been shown, considering a systems of three coupled oscillator ("triple push" oscillator) in which the stability of the various oscillating modes has been studied. Provided that a certain phase distribution is maintained among the oscillating elements, this topology permits a rise in the output power of the third harmonic; nevertheless due to circuit simmetry, "unwanted" oscillating modes coexist with the intenteded one. Starting with the necessary background on distributed amplification and distributed oscillator theory, the design of a four stage reverse mode distributed voltage controlled oscillator (DVCO) using lumped elments has been presented. All the design steps have been reported and for the first time a method for an optimized design with reduced variations in the output power has been presented. Ongoing work is devoted to model a wideband DVCO and to implement a frequency divider.

Tesitel botiga online

El projecte realitzat tracta sobre el desenvolupament i la posada en marxa d'una botiga online on es podran publicitar i vendre productes que distribueix l'empresa Tesitel.

Trypanosoma cruzi: establishment of permeable cells for RNA processing analysis with drugs

Pre-mRNA maturation in trypanosomatids occurs through a process called trans-splicing which involves excision of introns and union of exons in two independent transcripts. For the first time, we present the standardization of Trypanosoma cruzi permeable cells (Y strain) as a model for trans-splicing study of mRNAs in trypanosomes, following by RNase protection reaction, which localizes the SL exon and intron. This trans-splicing reaction in vitro was also used to analyze the influence of NFOH-121, a nitrofurazone-derivative, on this mechanism. The results suggested that the prodrug affects the RNA processing in these parasites, but the trans-splicing reaction still occurred.

Diseño y Desarrollo de un cliente Web Processing Services (WPS) para gvSIG

Configuració d'un entorn de desenvolupament en el IDE Eclipse. Introducció als SIG. Usos, utilitats i exemples. Conèixer la eina gvSIG. Conèixer els estàndards més estesos de l'Open Geospatial Consortium (OGC) i en especial del Web Processing Services. Analitzar, dissenyar i desenvolupar un client capaç de consumir serveis wps.

Sistema de comandes amb serveis web

Aquest treball aborda la construcció d'un sistema de programari distribuït emprant tecnologia orientada a aquest objecte. Veurem, doncs, les diverses fases per les quals passa la construcció del sistema, és a dir, l'especificació, el disseny i la implementació.

La botiga de l'àvia

Des del punt de vista tecnològic, aquest projecte presenta com a objectius la utilització d'una metodologia per al desenvolupament i la gestió del projecte, i també la utilització de la plataforma J2EE per a construir un sistema distribuït aplicant un patró arquitectònic de tres capes, que separi la presentació, la lògica de negoci i l'accés a les dades. De manera opcional es podran fer servir estructures avançades, com ara EJB i patrons de disseny.