High stability interleaved fibre Michelson interferometer for on-line precision displacement measurements

A self-reference fiber Michelson interferometer measurement system, which employs fiber Bragg gratings (FBGs) as in-fiber reflective mirrors and interleaves together two fiber Michelson interferometers that share the common-interferometric-optical path, is presented. One of the fiber interferometers is used to stabilise the system by the use of an electronic feedback loop to compensate the influences resulting from the environmental disturbances, while the other one is used to perform the measurement task. The influences resulting from the environmental disturbances have been eliminated by the compensating action of the electronic feedback loop, this makes the system suitable for on-line precision measurement. By means of the homodyne phase-tracking technique, the linearity of the measurement results of displacement measurements has been very high.

Displacement sensor using channelled spectrum dispersed on a linear CCD array

A novel form of low coherence interferometric sensor is described. The channelled spectrum produced by illuminating a sensing interferometer with a broadband source is analysed directly using a CCD array. The system currently provides unambiguous measurement over a range of 1.5 mm with an accuracy of better than 6 µm.

High stability multiplexed fiber interferometer and its application on absolute displacement measurement and on-line surface metrology

We propose a self-reference multiplexed fibre interferometer (MFI) by using a tunable laser and fibre Bragg grating (FBG). The optical measurement system multiplexes two Michelson fibre interferometers with shared optical path in the main part of optical system. One fibre optic interferometer is used as a reference interferometer to monitor and control the high accuracy of the measurement system under environmental perturbations. The other is used as a measurement interferometer to obtain information from the target. An active phase tracking homodyne (APTH) technique is applied for signal processing to achieve high resolution. MFI can be utilised for high precision absolute displacement measurement with different combination of wavelengths from the tuneable laser. By means of Wavelength-Division-Multiplexing (WDM) technique, MFI is also capable of realising on-line surface measurement, in which traditional stylus scanning is replaced by spatial light-wave scanning so as to greatly improve the measurement speed and robustness.

Designing post-disaster supply chains:learning from housing reconstruction projects

Post-disaster housing reconstruction projects face several challenges. Resources and material supplies are often scarce; several and different types of organizations are involved, while projects must be completed as quickly as possible to foster recovery. Within this context, the chapter aims to increase the understanding of relief supply chain design in reconstruction. In addition, the chapter is introducing a community based and beneficiary perspective to relief supply chains by evaluating the implications of local components for supply chain design in reconstruction. This is achieved through the means of secondary data analysis based on the evaluation reports of two major housing reconstruction projects that took place in Europe the last decade. A comparative analysis of the organizational designs of these projects highlights the ways in which users can be involved. The performance of reconstruction supply chains seems to depend to a large extent on the way beneficiaries are integrated in supply chain design impacting positively on the effectiveness of reconstruction supply chains.

Displacement sensor using channelled spectrum dispersed on a linear CCD array

A novel form of low coherence interferometric sensor is described. The channelled spectrum produced by illuminating a sensing interferometer with a broadband source is analysed directly using a CCD array. The system currently provides unambiguous measurement over a range of 1.5 mm with an accuracy of better than 6 µm.

Crisis communication and social media : the changing environment for natural disaster response

Over the past two years there have been several large-scale disasters (Haitian earthquake, Australian floods, UK riots, and the Japanese earthquake) that have seen wide use of social media for disaster response, often in innovative ways. This paper provides an analysis of the ways in which social media has been used in public-to-public communication and public-to-government organisation communication. It discusses four ways in which disaster response has been changed by social media: 1. Social media appears to be displacing the traditional media as a means of communication with the public during a crisis. In particular social media influences the way traditional media communication is received and distributed. 2. We propose that user-generated content may provide a new source of information for emergency management agencies during a disaster, but there is uncertainty with regards to the reliability and usefulness of this information. 3. There are also indications that social media provides a means for the public to self-organise in ways that were not previously possible. However, the type and usefulness of self-organisation sometimes works against efforts to mitigate the outcome of the disaster. 4. Social media seems to influence information flow during a disaster. In the past most information flowed in a single direction from government organisation to public, but social media negates this model. The public can diffuse information with ease, but also expect interaction with Government Organisations rather than a simple one-way information flow. These changes have implications for the way government organisations communicate with the public during a disaster. The predominant model for explaining this form of communication, the Crisis and Emergency Risk Communication (CERC), was developed in 2005 before social media achieved widespread popularity. We will present a modified form of the CERC model that integrates social media into the disaster communication cycle, and addresses the ways in which social media has changed communication between the public and government organisations during disasters.

Crisis communication and social media:the changing environment for natural disaster response

Over the past two years there have been several large-scale disasters (Haitian earthquake, Australian floods, UK riots, and the Japanese earthquake) that have seen wide use of social media for disaster response, often in innovative ways. This paper provides an analysis of the ways in which social media has been used in public-to-public communication and public-to-government organisation communication. It discusses four ways in which disaster response has been changed by social media: 1. Social media appears to be displacing the traditional media as a means of communication with the public during a crisis. In particular social media influences the way traditional media communication is received and distributed. 2. We propose that user-generated content may provide a new source of information for emergency management agencies during a disaster, but there is uncertainty with regards to the reliability and usefulness of this information. 3. There are also indications that social media provides a means for the public to self-organise in ways that were not previously possible. However, the type and usefulness of self-organisation sometimes works against efforts to mitigate the outcome of the disaster. 4. Social media seems to influence information flow during a disaster. In the past most information flowed in a single direction from government organisation to public, but social media negates this model. The public can diffuse information with ease, but also expect interaction with Government Organisations rather than a simple one-way information flow. These changes have implications for the way government organisations communicate with the public during a disaster. The predominant model for explaining this form of communication, the Crisis and Emergency Risk Communication (CERC), was developed in 2005 before social media achieved widespread popularity. We will present a modified form of the CERC model that integrates social media into the disaster communication cycle, and addresses the ways in which social media has changed communication between the public and government organisations during disasters.

Tunnel monitoring using multicore displacement sensor

In this paper, we report the first demonstration of multiplexed fibre Bragg grating strain sensors in a multicore fibre for shape measurement and their application to structural monitoring. Sets of gratings, acting as strain gauges, are co-located in the multicore fibre such that they enable the curvature to be determined via differential strain measurement. Multiple sets of these gratings allow the curvature to be measured at several points along the fibre. In this paper, the multicore fibre is configured to measure the deflection of a simple mechanical beam arising from the displacement of concrete tunnel sections. Laboratory tests are presented in which the system was demonstrated capable of displacement measurement with a resolution of ±0.1 mm over a range of several millimetres. © 2006 IOP Publishing Ltd.