Hardware reduction in digital delta-sigma modulators via error masking - part I: MASH DDSM

Two classes of techniques have been developed to whiten the quantization noise in digital delta-sigma modulators (DDSMs): deterministic and stochastic. In this two-part paper, a design methodology for reduced-complexity DDSMs is presented. The design methodology is based on error masking. Rules for selecting the word lengths of the stages in multistage architectures are presented. We show that the hardware requirement can be reduced by up to 20% compared with a conventional design, without sacrificing performance. Simulation and experimental results confirm theoretical predictions. Part I addresses MultistAge noise SHaping (MASH) DDSMs; Part II focuses on single-quantizer DDSMs..

MyRoom: A user-centred model of affective responsive architecture

Can my immediate physical environment affect how I feel? The instinctive answer to this question must be a resounding “yes”. What might seem a throwaway remark is increasingly borne out by research in environmental and behavioural psychology, and in the more recent discipline of Evidence-Based Design. Research outcomes are beginning to converge with findings in neuroscience and neurophysiology, as we discover more about how the human brain and body functions, and reacts to environmental stimuli. What we see, hear, touch, and sense affects each of us psychologically and, by extension, physically, on a continual basis. The physical characteristics of our daily environment thus have the capacity to profoundly affect all aspects of our functioning, from biological systems to cognitive ability. This has long been understood on an intuitive basis, and utilised on a more conscious basis by architects and other designers. Recent research in evidence-based design, coupled with advances in neurophysiology, confirm what have been previously held as commonalities, but also illuminate an almost frightening potential to do enormous good, or alternatively, terrible harm, by virtue of how we make our everyday surroundings. The thesis adopts a design methodology in its approach to exploring the potential use of wireless sensor networks in environments for elderly people. Vitruvian principles of “commodity, firmness and delight” inform the research process and become embedded in the final design proposals and research conclusions. The issue of person-environment fit becomes a key principle in describing a model of continuously-evolving responsive architecture which makes the individual user its focus, with the intention of promoting wellbeing. The key research questions are: What are the key system characteristics of an adaptive therapeutic single-room environment? How can embedded technologies be utilised to maximise the adaptive and therapeutic aspects of the personal life-space of an elderly person with dementia?.

Transformation optics with photonic band gap media.

We introduce a class of optical media based on adiabatically modulated, dielectric-only, and potentially extremely low-loss, photonic crystals (PC). The media we describe represent a generalization of the eikonal limit of transformation optics (TO). The basis of the concept is the possibility to fit some equal frequency surfaces of certain PCs with elliptic surfaces, allowing them to mimic the dispersion relation of light in anisotropic effective media. PC cloaks and other TO devices operating at visible wavelengths can be constructed from optically transparent substances such as glasses, whose attenuation coefficient can be as small as 10 dB/km, suggesting the TO design methodology can be applied to the development of optical devices not limited by the losses inherent to metal-based, passive metamaterials.

A pll based frequency synthesizer in 0.13 um sige bicmos for mb-ofdm uwb systems

With the growing demand for high-speed and high-quality short-range communication, multi-band orthogonal frequency division multiplexing ultra-wide band (MB-OFDM UWB) systems have recently garnered considerable interest in industry and in academia. To achieve a low-cost solution, highly integrated transceivers with small die area and minimum power consumption are required. The key building block of the transceiver is the frequency synthesizer. A frequency synthesizer comprised of two PLLs and one multiplexer is presented in this thesis. Ring oscillators are adopted for PLL implementation in order to drastically reduce the die area of the frequency synthesizer. The poor spectral purity appearing in the frequency synthesizers involving mixers is greatly improved in this design. Based on the specifications derived from application standards, a design methodology is presented to obtain the parameters of building blocks. As well, the simulation results are provided to verify the performance of proposed design.

Global value Chains, rising power firms and economic and social upgrading

© Emerald Group Publishing Limited.Purpose – The purpose of this paper is to introduce the global value chain (GVC) approach to understand the relationship between multinational enterprises (MNEs) and the changing patterns of global trade, investment and production, and its impact on economic and social upgrading. It aims to illuminate how GVCs can advance our understanding about MNEs and rising power (RP) firms and their impact on economic and social upgrading in fragmented and dispersed global production systems. Design/methodology/approach – The paper reviews theGVCliterature focusing on two conceptual elements of the GVC approach, governance and upgrading, and highlights three key recent developments in GVCs: concentration, regionalization and synergistic governance. Findings – The paper underscores the complicated role of GVCs in shaping economic and social upgrading for emerging economies, RP firms and developing country firms in general. Rising geographic and organizational concentration in GVCs leads to the uneven distribution of upgrading opportunities in favor of RP firms, and yet economic upgrading may be elusive even for the most established suppliers because of power asymmetry with global buyers. Shifting end markets and the regionalization of value chains can benefit RP firms by presenting alternative markets for upgrading. Yet, without further upgrading, such benefits may be achieved at the expense of social downgrading. Finally, the ineffectiveness of private standards to achieve social upgrading has led to calls for synergistic governance through the cooperation of private, public and social actors, both global and local. Originality/value – The paper illuminates how the GVC approach and its key concepts can contribute to the critical international business and RP firms literature by examining the latest dynamics in GVCs and their impacts on economic and social development in developing countries.

The effect of curing on the performance of ACF bonded chip-on-flex assemblies after thermal ageing

Purpose – Anisotropic conductive film (ACF) is now an attractive technology for direct mounting of chips onto the substrate as an alternative to lead-free solders. However, despite its various advantages over other technologies, it also has many unresolved reliability issues. For instance, the performance of ACF assembly in high temperature applications is questionable. The purpose of this paper is to study the effect of bonding temperatures on the curing of ACFs, and their mechanical and electrical performance after high temperature ageing. Design/methodology/approach – In the work presented in this paper, the curing degree of an ACF at different bonding temperatures was measured using a differential scanning calorimeter. The adhesion strength and the contact resistance of ACF bonded chip-on-flex assembly were measured before and after thermal ageing and the results were correlated with the curing degree of ACF. The ACF was an epoxy-based adhesive in which Au-Ni coated polymer particles were randomly dispersed. Findings – The results showed that higher bonding temperatures had resulted in better ACF curing and stronger adhesion. After ageing, the adhesion strength increased for the samples bonded at lower temperatures and decreased for the samples bonded at higher temperatures. ACF assemblies with higher degrees of curing showed smaller increases in contact resistance after ageing. Conduction gaps at the bump-particle and/or particle-pad interfaces were found with the help of scanning electron microscopy and are thought to be the root cause of the increase in contact resistance. Originality/value – The present study focuses on the effect of bonding temperatures on the curing of ACFs, and their adhesion strength and electrical performances after high temperature ageing. The results of this study may help the development of ACFs with higher heat resistance, so that ACFs can be considered as an alternative to lead-free solders.

Macro-micro modelling of moisture induced stresses in an ACF flip chip assembly

Purpose – This paper discusses the use of modelling techniques to predict the reliability of an anisotropic conductive film (ACF) flip chip in a humid environment. The purpose of this modelling work is to understand the role that moisture plays in the failure of ACF flip chips. Design/methodology/approach – A 3D macro-micro finite element modelling technique was used to determine the moisture diffusion and moisture-induced stresses inside the ACF flip chip. Findings – The results show that the ACF layer in the flip chip can be expected to be fully saturated with moisture after 3?h at 121°C, 100%RH, 2?atm test conditions. The swelling effect of the adhesive due to this moisture absorption causes predominately tensile stress at the interface between the adhesive and the metallization, which could cause a decrease in the contact area, and therefore an increase in the contact resistance. Originality/value – This paper introduces a macro-micro modelling technique which enables more detailed 3D modelling analysis of an ACF flip chip than previously.

Reliability of power electronic modules

The electric car, the all electric aircraft and requirements for renewable energy are examples of potential technologies needed to address the world problem of global warming/carbon emission etc. Power electronics and packaged modules are fundamental for the underpinning of these technologies and with the diverse requirements for electrical configurations and the range of environmental conditions, time to market is paramount for module manufacturers and systems designers alike. This paper details some of the results from a major UK project into the reliability of power electronic modules using physics of failure techniques. This paper presents a design methodology together with results that demonstrate enhanced product design with improved reliability, performance and value within acceptable time scales

Multiphysics simulation of microwave curing in micro-electronics packaging applications

Purpose – This paper aims to present an open-ended microwave curing system for microelectronics components and a numerical analysis framework for virtual testing and prototyping of the system, enabling design of physical prototypes to be optimized, expediting the development process. Design/methodology/approach – An open-ended microwave oven system able to enhance the cure process for thermosetting polymer materials utilised in microelectronics applications is presented. The system is designed to be mounted on a precision placement machine enabling curing of individual components on a circuit board. The design of the system allows the heating pattern and heating rate to be carefully controlled optimising cure rate and cure quality. A multi-physics analysis approach has been adopted to form a numerical model capable of capturing the complex coupling that exists between physical processes. Electromagnetic analysis has been performed using a Yee finite-difference time-domain scheme, while an unstructured finite volume method has been utilized to perform thermophysical analysis. The two solvers are coupled using a sampling-based cross-mapping algorithm. Findings – The numerical results obtained demonstrate that the numerical model is able to obtain solutions for distribution of temperature, rate of cure, degree of cure and thermally induced stresses within an idealised polymer load heated by the proposed microwave system. Research limitations/implications – The work is limited by the absence of experimentally derived material property data and comparative experimental results. However, the model demonstrates that the proposed microwave system would seem to be a feasible method of expediting the cure rate of polymer materials. Originality/value – The findings of this paper will help to provide an understanding of the behaviour of thermosetting polymer materials during microwave cure processing.

Dynamic melting model for small samples in cold crucible

Purpose – A small size cold crucible offers possibilities for melting various electrically conducting materials with a minimal wall contact. Such small samples can be used for express contamination analysis, preparing limited amounts of reactive alloys or experimental material analyses. Aims to present a model to follow the melting process. Design/methodology/approach – The presents a numerical model in which different types of axisymmetric coil configurations are analysed. Findings – The presented numerical model permits dynamically to follow the melting process, the high-frequency magnetic field distribution change, the free surface and the melting front evolution, and the associated turbulent fluid dynamics. The partially solidified skin on the contact to the cold crucible walls and bottom is dynamically predicted. The segmented crucible shape is either cylindrical, hemispherical or arbitrary shaped. Originality/value – The model presented within the paper permits the analysis of melting times, melt shapes, electrical efficiency and particle tracks.

Uncertainty analysis to minimise risk in designing micro-electronics manufacturing processes

A design methodology based on numerical modelling, integrated with optimisation techniques and statistical methods, to aid the process control of micro and nano-electronics based manufacturing processes is presented in this paper. The design methodology is demonstrated for a micro-machining process called Focused Ion Beam (FIB). This process has been modelled to help understand how a pre-defined geometry of micro- and nano- structures can be achieved using this technology. The process performance is characterised on the basis of developed Reduced Order Models (ROM) and are generated using results from a mathematical model of the Focused Ion Beam and Design of Experiment (DoE) methods. Two ion beam sources, Argon and Gallium ions, have been used to compare and quantify the process variable uncertainties that can be observed during the milling process. The evaluations of the process performance takes into account the uncertainties and variations of the process variables and are used to identify their impact on the reliability and quality of the fabricated structure. An optimisation based design task is to identify the optimal process conditions, by varying the process variables, so that certain quality objectives and requirements are achieved and imposed constraints are satisfied. The software tools used and developed to demonstrate the design methodology are also presented.

A price worth paying?: Women and work – choice, constraint or satisficing

Purpose – Are women held back or holding back? Do women choose their jobs/careers or are they structurally or normatively constrained? The purpose of this paper is to shed fresh light on these questions and contribute to an on-going debate that has essentially focused on the extent to which part-time work is women’s choice, the role of structural and organisational constraints and the role of men in excluding women. Design/methodology/approach – The paper uses data from interviews with 80 working women – both full-time and part-time – performing diverse work roles in a range of organisations in the south east of England. Findings – It was found that many women do not make strategic job choices, rather they often ‘‘fall into’’ jobs that happen to be available to them. Some would not have aspired to their present jobs without male encouragement; many report incidents of male exclusion; and virtually all either know or suspect that they are paid less than comparable men. Those working reduced hours enjoy that facility, yet they are aware that reduced hours and senior roles are seen as incompatible. In short, they recognise both the positive and negative aspects of their jobs, whether they work full or part-time, whether they work in male-dominated or female-dominated occupations, and whatever their position in the organisational hierarchy. Accordingly, the paper argues that the concept of ‘‘satisficing’’, i.e. a decision which is good enough but not optimal, is a more appropriate way to view women’s working lives than are either choice or constraint theories. Originality/value – There is an ongoing, and often polarised, debate between those who maintain that women choose whether to give preference to work or home/family and others who maintain that women, far from being self-determining actors, are constrained structurally and normatively. Rather than supporting these choice or constraint theories, this paper argues that ‘‘satisficing’’ is a more appropriate and nuanced concept to explain women’s working lives.

Developing “middle leaders” in the public services? The realities of management and leadership development for public managers

Purpose – This paper aims to assess the actual contribution to organisational change of management and leadership development (MLD) activity for middle managers (MMs) in public service organisations (PSOs). Design/methodology/approach – Using the case study approach, the paper compares the content and outcomes of management and leadership training interventions for MMs in two large PSOs. The organisations, a fire brigade and a train operating company, are leaders in their sectors with respect to management development and “modernisation” of their services. Findings – The paper demonstrates how, in one case, MM development was largely an exercise in regulatory compliance, with little effect on individual MMs' performance or organisational outcomes. The second case demonstrates how MMs were effectively trained to enforce specific human resource policies which contributed to the successful implementation of top-down strategy yet paid little attention to the potential leadership role of MMs. Research limitations/implications – The paper highlights the need for further contextualised research at organisational level into the outcomes of MLD, especially in terms of different public service contexts. Practical implications – The paper demonstrates the dangers of designing and implementing development programmes without sufficient regard to professional practice and the realities of managerial discretion in PSOs. Originality/value – The paper provides an in-depth and contextualised insight into the conditions for success and failure in management development interventions in PSOs.

Sole agency vs multi-agency: An investigation of agency practice across England and Wales

Purpose: The purpose of this paper is to investigate the impact of different agency practice on agency fees, business efficiency, and housing market liquidity. Design/methodology/approach: The paper studies the effect of sole and multiple agency practices on estate agent efficiency, housing market liquidity, and commission fee levels. The analysis uses the survey data from 2000 to 2006 to investigate the different agency practices across England and Wales and their effect on estate agency business efficiency, housing market liquidity, selling price, and fee levels. Findings: The empirical analysis confirms that agency practice has a locality bias, that is, some regions are more likely to adopt sole agency practice than other regions. The estate agents with a sole agency practice charge a lower agency fee, help clients to achieve better selling price and are more efficient; whereas multiple agency practice facilitates liquidity in the housing market, but experiences higher fall-through rate. Research limitations/implications: The research focuses on estate agent rather than consumers due to the limitation of the data based on a research project concerning transaction costs designed prior to this analysis. Originality/value: There is little other research that investigates the residential estate agency practice and its impact on housing market in the past three decades in England and Wales. The findings are a useful guide for practitioners to better understand the issues associated with different agency practices and should enhance business efficiency and performance.

Journal citation among heterodox economists 1995-2007: Dynamics of community emergence

Purpose – This study aims to investigate the pattern among 17 heterodox economic journals over a prolonged period to provide evidence about the social dynamics among the group of researchers who publish in them and the extent to which they hold or develop a collective identity as heterodox economists. Design/methodology/approach – Traditional approaches to citation analysis are extended by the use of techniques from social network analysis. In addition to citation counts, measures of network position and clique membership are used to identify key journals and turning points in a longitudinal analysis. Findings – Important shifts in the nature of citation within the network of journals are identified in the 1998-2001 period and evidence is found of the emergence of a collective identity. Research limitations/implications – The methods prove a valuable extension of citation analysis and also focus greater consideration on the social relationships that citations represent. They are well suited to addressing the principal limitation of the study, its restriction to journals within the defined community rather than journals in general. Originality/value – This extends traditional approaches to citation analysis, provides an important new technique in identifying emergent collective identities and provides insight into the history and nature of the heterodox economic community.