The myGrid Notification Service

The notification service is the part of myGrid that enables asynchronous delivery of messages between distributed components. It includes features such as topic-based publish-subscribe messaging, push/pull models, asynchronous delivery, persistence, transient and durable subscriptions, durable topics, negotiation of QoS, hierarchical topic structure and federation of services. Some of these features are novel in the area of messaging middleware. A cost evaluation of some of these features indicate that the overhead incurred is justified in terms of compensating benefits gained.

Automated Negotiation Between Publishers And Consumers Of Grid Notifications

Notification Services mediate between information publishers and consumers that wish to subscribe to periodic updates. In many cases, however, there is a mismatch between the dissemination of these updates and the delivery preferences of the consumer, often in terms of frequency of delivery, quality, etc. In this paper, we present an automated negotiation engine that identifies mutually acceptable terms; we study its performance, and discuss its application to a Grid Notification Service. We also demonstrate how the negotiation engine enables users to control the Quality of Service levels they require.

Efficient Multi-Granularity Service Composition

Dynamic composition of services provides the ability to build complex distributed applications at run time by combining existing services, thus coping with a large variety of complex requirements that cannot be met by individual services alone. However, with the increasing amount of available services that differ in granularity (amount of functionality provided) and qualities, selecting the best combination of services becomes very complex. In response, this paper addresses the challenges of service selection, and makes a twofold contribution. First, a rich representation of compositional planning knowledge is provided, allowing the expression of multiple decompositions of tasks at arbitrary levels of granularity. Second, two distinct search space reduction techniques are introduced, the application of which, prior to performing service selection, results in significant improvement in selection performance in terms of execution time, which is demonstrated via experimental results.

Scriptural Archeology: Excavating the Presence of Women in the Torah

Women's roles in religious history have been traditionally described in terms of their relation and value to men. The normative religious texts provide an androcentric perspective on the gender relationships within the early community, the growth of Judaism in "Jacob's House" and the monotheistic worship of God. Yet these literary representations omit an entire half of the experience of the Jewish community: the perspective and participation of women. As Judith Plaskow argues extensively in Standing Again at Sinai, women are defined not in her own terms or in her own voice, but by her relationship and value to men through the androcentric vocabulary of the Torah. This statement is textually illustrated by the authorial and editorial presentation of women and their place in ancient Israelite society in the Torah. As Judaism grew increasingly androcentric in its leadership, women were increasingly reduced to marginal figures in the community by authorial and editorial revisions. Yet the participation of women of ancient Israel is not lost. Instead, the presence of women is buried beneath the androcentric presentation of the early Judaic community, waiting to be excavated by historical and scriptural examination. The retelling of the past is influenced by the present; memory is not static but takes on different shapes depending on the focus of concentration. However, tradition greatly influences the interpretation of religious history as well. In the book of Genesis, the literature emphasizes the divine appointment of male figures such as Abraham the father of the covenant and Jacob who is renamed and claimed by God as "Israel," placing them at the center of Jewish history. As a result, the other figures in these biblical narratives are described in relation to the patriarchs, those male bearers of the covenant, by their service or their value to him. Women are at the bottom of this hierarchy. Although female figures of exceptional quality are noted in later chronicles, such as Ruth, Deborah and Miriam, it is the very nature of their exception that highlights the androcentric editorial focus of the Torah. I agree with Peggy Day, whose own scriptural examination in Gender and Difference in Ancient Israel, makes the important distinction between the literary representation and the reality of ancient Israelite culture: they are not coextensive nor equivalent. Although the text represents the culture of ancient Israel as male dominated from the time of Abraham, this presentation omits the perspective of half of the population-the women. By beginning at the point of realization that women did exist and were active in their culture, and placing aside the androcentric perspective of the text and its editors, the reality of women's place in ancient Israel may be determined. Through this new perspective, the women of the Torah will emerge as the archetypes of strength, leadership and spiritual insight to provide Jewish women of the present with female, ancestral role models and a foundation for their gender's heritage, a more complete understanding of the partial record of Jewish history recorded in the Torah. Those stories that appear as the exception of women's presence will unveil an exceptional presence. As Tamar Frankiel eloquently states in The Voice of Sarah, "the women we call our 'Mothers'-Sarah, Rivkah (Rebekah), Rachel, and Leah-are not merely mothers, any more than the 'Fathers'-Abraham, Isaac and Jacob-are merely fathers "(Frankiel 5).

Re-framing risk transfer to assess integrative partnership opportunities: the S.A.R. approach and the AIG/BID/CNO regional surety bond facility of 2007

Identificar, compartilhar e gerenciar os riscos de contratar são preocupações que impedem o estabelicmento e a administração das Parcerias Públicos Particulares (PPP). Porem, gerentes das entidades públicas, bancos de formento, construtoras e seguradoras pesquisam e utilizam muitas técnicas para enfrentar a avaliação e gerenciamento dos riscos. A transferência de risco é uma indicação dos chamados benefícios que são inspirados pelos PPP, contudo devido às realidades contratuais e conceptuais, a entidade de cede o risco (o partido público) permanece quase sempre como o portador final do risco. Conseqüentemente, o partido público retem um interesse de resistência na gerência total destes riscos cedidos. Esta dissertação explora alguns defeitos das aproximações comuns a conceituar a gestão de risco no contexto de um PPP. Focalizando os conceitos da interdependência e da reciprocidade e usando na decisão para transferir o risco do projeto, esta dissertação molda a decisão para transferir o risco nos termos das realidades interdependentes de relacionamentos sistemáticos, alargam os conceitos técnicos do risco e da avaliação de risco, considerando o uso reflexivo das diferenças na analise de um estudo de caso. O autor explora estes conceitos em uma análise da decisão de um gerente de risco da empresa de construção civil brasileira Construtora Norberto Odebrecht (ODB) para projetar uma facilidade inovadora da ligação de garantia com Inter-American Development Bank (BID) e uma seguradora, American International Group (AIG), um negócio que ganhe o reconhecimento Trade Finance Magazine’s 2007 deal of the year. O autor mostra que por compreender a transferência de risco nos termos abordados nesta dissertação, um atore que transfere o risco pode identificar e criar mais oportunidades de estabelecer relacionamentos em longo prazo, através dos processos que a literatura atual do PPP ainda não considere. Os resultados devem fornecer contribuições para a pesquisas sobre a transferência do risco do projeto, na cooperação entre organizações e na seleção do sócio do projeto do potencial.

Modified value stream mapping of airport check-in procedures

In June 2014 Brazil hosted the FIFA World Cup and in August 2016 Rio de Janeiro hosts the Summer Olympics. These two seminal sporting events will draw tens of thousands of air travelers through Brazil’s airports, airports that are currently in the midst of a national modernization program to address years of infrastructure neglect and insufficient capacity. Raising Brazil’s major airports up to the standards air travelers experience at major airports elsewhere in the world is more than just a case of building or remodeling facilities, processes must also be examined and reworked to enhance traveler experience and satisfaction. This research paper examines the key interface between airports and airline passengers—airport check-in procedures—according to how much value and waste there is associated with them. In particular, the paper makes use of a value stream mapping construct for services proposed by Martins, Cantanhede, and Jardim (2010). The uniqueness of this construct is that it attributes each activity with a certain percentage and magnitude of value or waste which can then be ordered and prioritized for improvement. Working against a fairly commonly expressed notion in Brazil that Brazil’s airports are inferior to the airports of economically advanced countries, the paper examines Rio’s two major airports, Galeão International and Santos Dumont in comparison to Washington D.C.’s Washington National and Dulles International airports. The paper seeks to accomplish three goals: - Determine whether there are differences in airport passenger check-in procedures between U.S. and Brazilian airports in terms of passenger value - Present options for Brazilian government or private sector authorities to consider adopting or implementing at Brazilian airports to maximize passenger value - Validate the Martins et al. construct for use in evaluating the airport check-in procedures Observations and analysis proved surprising in that all airports and service providers follow essentially the same check-in processes but execute them differently yet still result in similar overall performance in terms of value and waste. Although only a few activities are categorized as completely wasteful (and therefore removed in the revised value stream map of check-in activities), the weighting and categorization of individual activities according to their value (or waste) presents decision-makers a means to prioritize possible corrective actions. Various overall recommendations are presented based on this analysis. Most importantly, this paper demonstrates the viability of using the construct developed by Martins et al to examine airport operations, as well as its applicability to the study of other service industry processes.

A framework for monitoring and runtime recovery of web service-based applications

Service provisioning is a challenging research area for the design and implementation of autonomic service-oriented software systems. It includes automated QoS management for such systems and their applications. Monitoring, Diagnosis and Repair are three key features of QoS management. This work presents a self-healing Web service-based framework that manages QoS degradation at runtime. Our approach is based on proxies. Proxies act on meta-level communications and extend the HTTP envelope of the exchanged messages with QoS-related parameter values. QoS Data are filtered over time and analysed using statistical functions and the Hidden Markov Model. Detected QoS degradations are handled with proxies. We experienced our framework using an orchestrated electronic shop application (FoodShop).

Hygrothermal effects on damping behavior of metal/glass fiber/epoxy hybrid composites

Continuous fiber/metal laminates (FML) offer significant improvements over current available materials for aircraft structures due to their excellent fatigue endurance and low density. Glass fibers/epoxy laminae and aluminum foil (Glare) are commonly used to obtain these hybrid composites. The environmental factors can limit the applications of composites by deteriorating the mechanical properties during service. Usually, epoxy resins absorb moisture when exposed to humid environments and metals are prone to surface corrosion. Therefore, the combination of the two materials in Glare (polymeric composite and metal). can lead to differences that often turn out to be beneficial in terms of mechanical properties and resistance to environmental influences. In this work. The viscoelastic properties. such as storage modulus (E') and loss modulus (E'), were obtained for glass fiber/epoxy composite, aluminum 2024-T3 alloy and for a glass fiber/epoxy/aluminum laminate (Glare). It was found that the glass fiber/epoxy (G/E) composites decrease the E' modulus during hygrothermal conditioning up to saturation point (6 weeks). However, for Glare laminates the E' modulus remains unchanged (49GPa) during the cycle of hygrothermal conditioning. The outer aluminum sheets in the Glare laminate shield the G/E composite laminae from moisture absorption. which in turn prevent, in a certain extent, the material from hygrothermal degradation effects. (c) 2005 Elsevier B.V. All rights reserved.

A Methodology for Building Service-Oriented Applications in the Presence of Non-Functional Properties

This thesis presents ⇡SOD-M (Policy-based Service Oriented Development Methodology), a methodology for modeling reliable service-based applications using policies. It proposes a model driven method with: (i) a set of meta-models for representing non-functional constraints associated to service-based applications, starting from an use case model until a service composition model; (ii) a platform providing guidelines for expressing the composition and the policies; (iii) model-to-model and model-to-text transformation rules for semi-automatizing the implementation of reliable service-based applications; and (iv) an environment that implements these meta-models and rules, and enables the application of ⇡SOD-M. This thesis also presents a classification and nomenclature for non-functional requirements for developing service-oriented applications. Our approach is intended to add value to the development of service-oriented applications that have quality requirements needs. This work uses concepts from the service-oriented development, non-functional requirements design and model-driven delevopment areas to propose a solution that minimizes the problem of reliable service modeling. Some examples are developed as proof of concepts

Electrochemical stability of SnO2-based coated Ti electrodes

The electrochemical behavior of SnO2-SbOx, based electrodes, with and without the addition of RuO2, was studied by cyclic voltammetry, service life measurements and electrochemical impedance spectroscopy in 0.5 M H2SO4 the physical characteristics of these materials were investigated using SEM, EDX and XRD. The resulting cyclic voltammograms obtained using SnO2-SbOx, and SnO2-SbOx-RuO2(x), x = 30, 5, 1 and 0.4 % showed that the OER overpotential decreased with the addition of RuO2. In the repetitive triangular potential voltammetry applied to the SnO2 electrode without and with RuO2 (1%), a higher anodic current is observed during the first potential scan; it is explained in terms of the oxidation of the Ti substrate. The addition of 1% RuO2 increased the service life from 8 to 20 hours at 10 mAcm(-2), while at 50 mAcm(-2) this increase was from 1 to 8 hours. AC Impedance diagrams obtained for the Ti/SnO2-SbOx and Ti/SnO2-SbOx-RuO2 electrodes at the rest potential and at a potential in the OER region can be explained by a single equivalent circuit containing two elements in series. The results showed that the charge transfer resistance and the resistance of the oxide film are lower in the oxide film containing RuO2. Surface analysis of Ti/SnO2-SbOx, revealed that it is relatively porous and formed by clusters of small particles. The Ti/SnO2-SbOx-RuO2 (1%) film is more compact, though. XRD analysis showed that a Sn1-xTixO2 oxide is formed on the Ti/SnO2-SbOx with 1% and without RuO2 electrodes.

A self-healing architecture for Web service-based applications

Web service-based application is an architectural style, where a collection of Web services communicates to each other to execute processes. With the popularity increase of developing Web service-based application and once Web services may change, in terms of functional and non-functional Quality of Service (QoS), we need mechanisms to monitor, diagnose, and repair Web services into a Web Application. This work presents a description of self-healing architecture that deals with these mechanisms. Other contributions of this paper are using the proxy server to measure Web service QoS values and to employ some strategies to recovery the effects from misbehaved Web services. © 2008 IEEE.

Preliminary overview of the economies of the Caribbean 2012-2013

Includes bibliography

In search of work. International migration of women in Latin America and the Caribbean. Selected bibliography

Includes bibliography

The privatization of public water utilities

Includes bibliography

Investing better in order to invest more. Finance and management of education in Latin America and the Caribbean

Includes bibliography