Activation of lower back muscles via FES for pressure sores prevention in paraplegia: a case study

The aim of this paper is to show the feasibility of the use of functional electrical stimulation (FES) applied to the lower back muscles for pressure sores prevention in paraplegia. The hypothesis under study is that FES induces a change in the pressure distribution on the contact area during sitting. Tests were conducted on a paraplegic subject (T5), sitting on a standard wheelchair and cushion. Trunk extensors (mainly the erector spinae) were stimulated using surface electrodes placed on the skin. A pressure mapping system was used to measure the pressure on the sitting surface in four situations: (a) no stimulation; (b) stimulation on one side of the spine only; (c) stimulation on both sides, at different levels; and (d) stimulation at the same level on both sides, during pressure-relief manoeuvres. A session of prolonged stimulation was also conducted. The experimental results show that the stimulation of the erector spinae on one side of the spine can induce a trunk rotation on the sagittal plane, which causes a change in the pressure distribution. A decrease of pressure on the side opposite to the stimulation was recorded. The phenomenon is intensified when different levels of stimulation are applied to the two sides, and such change can be sustained for a considerable time (around 5 minutes). The stimulation did not induce changes during pressure-relief manoeuvres. Finally, from this research we can conclude that the stimulation of the trunk extensors can be a useful tool for pressure sores prevention, and can potentially be used in a routine for pressure sores prevention based on periodical weight shifts.

The impact of large scale atmospheric circulation patterns on wind power generation and its potential predictability: a case study over the UK

Over recent years there has been an increasing deployment of renewable energy generation technologies, particularly large-scale wind farms. As wind farm deployment increases, it is vital to gain a good understanding of how the energy produced is affected by climate variations, over a wide range of time-scales, from short (hours to weeks) to long (months to decades) periods. By relating wind speed at specific sites in the UK to a large-scale climate pattern (the North Atlantic Oscillation or "NAO"), the power generated by a modelled wind turbine under three different NAO states is calculated. It was found that the wind conditions under these NAO states may yield a difference in the mean wind power output of up to 10%. A simple model is used to demonstrate that forecasts of future NAO states can potentially be used to improve month-ahead statistical forecasts of monthly-mean wind power generation. The results confirm that the NAO has a significant impact on the hourly-, daily- and monthly-mean power output distributions from the turbine with important implications for (a) the use of meteorological data (e.g. their relationship to large scale climate patterns) in wind farm site assessment and, (b) the utilisation of seasonal-to-decadal climate forecasts to estimate future wind farm power output. This suggests that further research into the links between large-scale climate variability and wind power generation is both necessary and valuable.

Pricing the options inherent in leased commercial property: a UK case study

This paper sets out the findings of a group of research and development projects carried out at the Department of Real Estate & Planning at the University of Reading and at Oxford Property Systems over the period 1999 – 2003. The projects have several aims: these are to identify the fundamental drivers of the pricing of different lease terms in the UK property sector; to identify current and best market practice and uncover the main variations in lease terms; to identify key issues in pricing lease terms; and to develop a model for the pricing of rent under a variety of lease variations. From the landlord’s perspective, the main factors driving the required ‘compensation’ for a lease term amendment include expected rental volatility, expected probability of tenant vacation, and the expected costs of tenant vacation. These data are used in conjunction with simulation technology to reflect the options inherent in certain lease types to explore the required rent adjustment. The resulting cash flows have interesting qualities which illustrate the potential importance of option pricing in a non-complex and practical way.

Extending higher educational opportunities through e-learning: a case study from Sri Lanka

The Knowledge Economy favours high skilled and adaptable workers, typically those with a degree. Information and Communication Technologies (ICTs) have the potential to extend educational opportunities through e-Learning. In Sri Lanka efforts have been made to employ ICTs in this way. The case study of Orange Valley University (pseudonymous) is presented, exploring the impact of ICT-based distance education on access to higher education. This ethnographic research employed questionnaires, qualitative interviews and documentary analysis. Online learning was found to appeal to a specific segment of the population. Flexibility and prestige were found to be important influences on programme selection. The majority possessed resources and skills for e-Learning; access and quality issues were considered.

Case study on the whole life carbon cycle in buildings

Global temperatures are expected to rise by between 1.1 and 6.4oC this century, depending, to a large extent, on the amount of carbon we emit to the atmosphere from now onwards. This warming is expected to have very negative effects on many peoples and ecosystems and, therefore, minimising our carbon emissions is a priority. Buildings are estimated to be responsible for around 50% of carbon emissions in the UK. Potential reductions involve both operational emissions, produced during use, and embodied emissions, produced during manufacture of materials and components, and during construction, refurbishments and demolition. To date the major effort has focused on reducing the, apparently, larger operational element, which is more readily quantifiable and reduction measures are relatively straightforward to identify and implement. Various studies have compared the magnitude of embodied and operational emissions, but have shown considerable variation in the relative values. This illustrates the difficulties in quantifying embodied, as it requires a detailed knowledge of the processes involved in the different life cycle phases, and requires the use of consistent system boundaries. However, other studies have established the interaction between operational and embodied, which demonstrates the importance of considering both elements together in order to maximise potential reductions. This is borne out in statements from both the Intergovernmental Panel on Climate Change and The Low Carbon Construction Innovation and Growth Team of the UK Government. In terms of meeting the 2020 and 2050 timeframes for carbon reductions it appears to be equally, if not more, important to consider early embodied carbon reductions, rather than just future operational reductions. Future decarbonisation of energy supply and more efficient lighting and M&E equipment installed in future refits is likely to significantly reduce operational emissions, lending further weight to this argument. A method of discounting to evaluate the present value of future carbon emissions would allow more realistic comparisons to be made on the relative importance of the embodied and operational elements. This paper describes the results of case studies on carbon emissions over the whole lifecycle of three buildings in the UK, compares four available software packages for determining embodied carbon and suggests a method of carbon discounting to obtain present values for future emissions. These form the initial stages of a research project aimed at producing information on embodied carbon for different types of building, components and forms of construction, in a simplified form, which can be readily used by building designers in optimising building design in terms of minimising overall carbon emissions. Keywords: Embodied carbon; carbon emission; building; operational carbon.

Getting pupils to 'see the point' of school subjects: history, a case study

This paper examines the factors that influence pupil take up of a subject, in this case history, at GCSE. The research indicates that pupils enjoy history but significant factors prevent many from choosing it for further study; these include factors that are beyond the control of teachers, such as government policy and the way this is interpreted by senior managers in school, and factors that are within the control of teachers. The paper suggests that there are lessons that departments can learn from more successful departments but there are also important side effects of government policy that are having unintended consequences.

English teachers in the digital age – a case study of policy and expert practice from England

This article is a case study of how English teachers in England have coped with the paradigm shift from print to digital literacy. It reviews a large scale national initiative that was intended to upskill all teachers, considers its weak impact and explores the author’s involvement in the evaluation of the project’s direct value to English teachers. It explores how this latter evaluation revealed how best practice in English using ICT was developing in a variable manner. It then reports on a recent small scale research project that investigated how very good teachers have adapted ICT successfully into their teaching. It focuses on how the English teachers studied in the project are developing a powerful new pedagogy situated in the life worlds of their students and suggests that this model may be of benefit to many teachers. The issues this article reports on have resonance in all English speaking countries. This article is also a personal story of the author’s close involvement with ICT and English over 20 years, and provides evidence for his conviction that digital technologies will eventually transform English teaching.

Variations in the mainstreaming of sustainability: a case study approach

The construction sector has a major role to play in delivering the transition to a low carbon economy and in contributing to sustainable development; however, integrating sustainability into everyday business remains a major challenge for the sector. This research explores the experience of three large construction and engineering consultancy firms in mainstreaming sustainability. The aim of the paper is to identify and explain variations in firm level strategies for mainstreaming sustainability. The three cases vary in the way in which sustainability is ramed – as a problem of risk, business opportunity or culture – and in its location within the firm. The research postulates that the mainstreaming of sustainability is not the uniform linear process often articulated in theories of strategic change and management, but varies with the dominant organisational culture and history of each firm. he paper concludes with a reflection on the implications of this analysis for management theories and for firm level strategies.

An in-depth view of the facets, antecedents and effects of leaders’ change competency: lessons from a case study

Leaders across companies initiate and implement change and thus are crucial for successful organizations. This study takes a competency perspective on leaders and investigates the competencies leaders show to facilitate effective change. The article explores the content of the construct of leaders’ change competency and examines its antecedents and effects. We conducted a case study in a German tourism company undergoing a major change process. The study identified (a) distinct content facets regarding the construct of leaders’ change competency along its two dimensions of leaders’ readiness for change and leaders’ change ability; (b) the construct’s antecedents, specifically contextual factors, leaders’ competency potentials, and attitudes toward change; and (c) beneficial effects of leaders’ change competency. The study ends with implications for research and leadership practice as well as suggestions for future studies on leaders’ change competency.

Case study modeling of turbulent and mesoscale fluxes over the BOREAS region

Results from aircraft and surface observations provided evidence for the existence of mesoscale circulations over the Boreal Ecosystem-Atmosphere Study (BOREAS) domain. Using an integrated approach that included the use of analytical modeling, numerical modeling, and data analysis, we have found that there are substantial contributions to the total budgets of heat over the BOREAS domain generated by mesoscale circulations. This effect is largest when the synoptic flow is relatively weak, yet it is present under less favorable conditions, as shown by the case study presented here. While further analysis is warranted to document this effect, the existence of mesoscale flow is not surprising, since it is related to the presence of landscape patches, including lakes, which are of a size on the order of the local Rossby radius and which have spatial differences in maximum sensible heat flux of about 300 W m−2. We have also analyzed the vertical temperature profile simulated in our case study as well as high-resolution soundings and we have found vertical profiles of temperature change above the boundary layer height, which we attribute in part to mesoscale contributions. Our conclusion is that in regions with organized landscapes, such as BOREAS, even with relatively strong synoptic winds, dynamical scaling criteria should be used to assess whether mesoscale effects should be parameterized or explicitly resolved in numerical models of the atmosphere.

Assessment of a 1 hour gridded precipitation dataset to drive a hydrological model: a case study of the summer 2007 floods in the Upper Severn, UK

In this study a gridded hourly 1-km precipitation dataset for a meso-scale catchment (4,062 km2) of the Upper Severn River, UK was constructed using rainfall radar data to disaggregate a daily precipitation (rain gauge) dataset. The dataset was compared to an hourly precipitation dataset created entirely from rainfall radar data. Results found that when assessed against gauge readings and as input to the Lisflood-RR hydrological model, the rain gauge/radar disaggregated dataset performed the best suggesting that this simple method of combining rainfall radar data with rain gauge readings can provide temporally detailed precipitation datasets for calibrating hydrological models.