Pienitehoisen CHP-laitoksen verkkoonliityntä

Työn tavoitteena on pienitehoisen CHP-laitoksen verkkoonliitynnän suunnittelu. Laitos polttaa Einco Oy:n CFB-kuivurissa (Circulating fluidized-bed) termisesti kuivattua lietettä hönkäkaasujen kanssa Einco Oy:n CTC-reaktorissa (Constant temperature combustion). CFB-kuivuri ja CTC-reaktori on kytketty höyryvoimalaitosprosessiin, jonka turbogeneraattorista saadaan sähköenergiaa. Työssä on tutkittu nykypäivän hajautetun tuotannon pienvoimalaitoksen verkkoonliitynnän suojausvaatimuksia, sähkönlaatuvaatimuksia, suosituksia ja mahdollisen verkonhaltijan ohjeita sekä generaattorilaitteistojen ominaisuuksia. Generaattorilaitteistot ovat vierasmagnetoitu tahtigeneraattori tai itsemagnetoitu tahtigeneraattori, kestomagneettitahtigeneraattori tai verkkomagnetoitu epätahtigeneraattori. Lisäksi on tarkasteltu ja vertailtu generaattorilaitteistojen verkkoonliitynnässä tarvittavien eri automaatiolaitteiden ominaisuuksia. Verkkoonliitynnät on suunniteltu 400 kW generaattorilaitteistovaihtoehdoille kahdella tavalla: suoraan verkkoon kytkettynä ja taajuusmuuttajalla verkkoon kytkettynä. Työn päätuloksia ovat suunnitellut sähköliittymät sekä suojaus- ja ohjauspiirit, ensiö- ja toisiosuojaukset, toteutustason piirustukset ja automaation toimintaselostus. Lisäksi suunnitelluille automaatiokokoonpanoille on laskettu hankintakustannukset. Taajuusmuuttajan avulla verkkoon kytketty suoravetoturbogeneraattori on todettu teknisesti ja taloudellisesti toimivaksi.

Approach to the Lower Pliocene marine-continental correlation from southern Spain. The micrommamal site of Alhaurín el Grande-1 (Málaga Basin, Betic Cordillera, Spain)

A new micromammal site at Alhaurín el Grande (Málaga, southern Spain) located above early Pliocene marine deposits allows an approach to the marine-continental correlation for this age. The early Pliocene marine filling throughout the Málaga Basin is developed in three transgressive-regressive sequences (Pl-1, Pl-2, and Pl-3 units) bounded by discontinuities. At the top of the intermediate sequence Pl-2, peaty sediments have yielded fossils of Rodentia, Lagomorpha, Insectivora, and Crocodylia. The presence of Cricetus barrieri Mein & Michaux, 1970 in combination with murids, both of primitive morphology, such as Apodemus gudrunae Van de Weerd, 1976, and more advanced forms (i.e. Occitanomys brailloni Michaux, 1969 and Stephanomys donnezani cordii Ruiz Bustos, 1986), points to an early Ruscinian age (MN 14 biozone). Based on the planktonic foraminifers, the biostratigraphic data indicate that marine sediments just below the micromammal beds belong to the MPl-2 biozone of the early Zanclean. Available paleomagnetic data from the marine sediments show that the micromammal bed must be located between the normal geomagnetic subchron C3n3n (4.89-4.80 Ma) and the subchron C3n2n (4.63-4.49 Ma), limiting the age of this site to the late part of the early Zanclean.

Magnetoestratigrafía de las sucesiones del Mioceno medio y superior del Vallés occidental (Depresión del Vallés-Penedés, NE España): Implicaciones biocronológicas y cronoestratigráficas.

The magnetostratigraphic analysis of the middle to late Miocene continental deposits from the Valles-Penedes basin, combined with its well-documented fossil mammal record, provides a well-resoluted chronology for the upper basin infill. It is based on the biostratigraphic and magnetostratigraphic cross-correlation of 18 sections throughout the alluvial and transitional/shallow marine sequences in the Western Valles area. The biostratigraphic framework consists of 24 mammal localities of upper Aragonian and Vallesian age. Correlation of the studied sections to the geomagnetic polarity time scale (GPTS) is based on the distinctive pattern of local magnetozones, as well as the radiometric age of the late Vallesian fauna from the Bicorp Basin (9.6 + 0.3 Ma) and the known relationship of the late Vallesian assemblages with marine beds belonging to the planktonic forarninifera N16 zone. It has led to an absolute dating of the fauna1 events and a precise chronostratigraphy of the Vallesian marnrnal stage in its type area. The Hipparion First Appearance Datum (FAD) defines the lower Vallesian boundary and is dated at 11.1 Ma, at the base of chron C5r. ln. It is in good agreement with radiometric ages from the early Hipparion bearing sites in the Vienna Basin (1 1.1 * 0.5 Ma) and the classic Howenegg locality in Germany (10.8 * 0.3 Ma). It also agrees with the age of the turkish localities of Yailacilar (1 1.6 + 0.25 Ma) and Yenieskihisar-2 (1 1.1 * 0.2 Ma) with absence of Hipparion. Al1 these support the isochrony of the dispersa1 of Hipparion throughout the Mediterranean region. A possible isochrony at a larger geographical scale (Old World, Mesogea) must await more reliable ages of the Hipparion FAD in Asia and Africa. The Cricetulodon FAD that defines the MN9a/MN9b boundary occurs at the middle part of C5n. Assuming an on average constant sedimentation rate, this datum has an age of approximately 10.4 Ma. The earlyllate Vallesian boundary is marked by one of the most distinct fauna1 events of the late Neogene: the dispersa1 of the muridae Progonomys into Europe and North Africa, which coincides with an important macromarnmal turnover. The first extensive appearance of Progonomys in Europe (MN9íMN10 boundary) is dated at 9.7 Ma (C4Ar3r), showing a remarkable diachrony with the Himalayan region. F9i d lly, the FAD of Rotundomys bressnnus occurs in the upper part of C4Ar.ln (9.2-9.3 Ma). The Vallesian spans 2.4 Myr, from 11.1 Ma (CSr.ln) to 8.7 Ma (C4An), and correlates to the early Tortonian.

Teho-osaston ja valvontaosaston rakentamisen kannattavuus Oulun yliopistollisessa sairaalassa

Diplomityön tavoitteena oli määrittää Oulun yliopistollisen sairaalan Leikkaus- ja tehohoidon tulosyksikön teho- ja valvontaosaston paikkatarve sekä selvittää, miten sijainti vaikuttaa toimintaan, kun teho-osasto muuttaa kirurgian poliklinikan tiloihin ja sijainti muuttuu yhteispäivystysyksikköön, leikkausosastoon ja vuodeosastoihin nähden. Lisäksi selvitettiin, mihin uusi valvontaosasto kannattaa rakentaa sekä ra kentamishankkeen kannattavuus käyttämällä kolmea eri laskentamenetelmää. Työn teoria- ja empiriaosuus on osittain yhdistetty, mikä helpottaa työn seuraamista ja parantaa loogisuutta. Teoriaosuudessa käsitellään investointien kannattavuuden arviointia, poistojen vaikutusta talouteen, Pohjois-Pohjanmaan sairaanhoitopiiriä ja Leikkaus- ja tehohoidon tulosyksikön toimintaa sekä erityisesti tehohoitotyötä ja teho-osaston toimintaa. Empiriaosuus koostuu erityisvastuualueen väestönkehityksen arvioinnista, johon tulevaisuuden tehohoitotarve pohjautuu sekä teho- ja valvon taosaston paikkatarpeen määrityksestä ja investoinnin kannattavuuden arvioinnista. Työ antaa hyvän pohjan teho- ja valvontaosaston rakentamissuunnittelulle, ja investointien tarkastelu taloudelliselta näkökulmalta toimii tukena investointipäätöksenteolle. Tämän työn tuloksena teho- ja valvontaosaston rakentaminen on kannattavaa kolmen eri investointilaskelmamenetelmän perusteella.

A system to assess the stability of airborne nanoparticle agglomerates under aerodynamic shear

Stability of airborne nanoparticle agglomerates is important for occupational exposure and risk assessment in determining particle size distribution of nanomaterials. In this study, we developed an integrated method to test the stability of aerosols created using different types of nanomaterials. An aerosolization method, that resembles an industrial fluidized bed process, was used to aerosolize dry nanopowders. We produced aerosols with stable particle number concentrations and size distributions, which was important for the characterization of the aerosols' properties. Next, in order to test their potential for deagglomeration, a critical orifice was used to apply a range of shear forces to them. The mean particle size of tested aerosols became smaller, whereas the total number of particles generated grew. The fraction of particles in the lower size range increased, and the fraction in the upper size range decreased. The reproducibility and repeatability of the results were good. Transmission electron microscopy imaging showed that most of the nanoparticles were still agglomerated after passing through the orifice. However, primary particle geometry was very different. These results are encouraging for the use of our system for routine tests of the deagglomeration potential of nanomaterials. Furthermore, the particle concentrations and small quantities of raw materials used suggested that our system might also be able to serve as an alternative method to test dustiness in existing processes.

Psychiatrie [New developments in psychiatry].

Three issues are discussed: i) While number of psychiatric beds has been reduced in most countries and although treatments proposed in psychiatric hospitals have evolved, they continue to be viewed as asylums implementing constraints. Considering this prevents their adequate use and leads to patients' stigmatisation, promotion of a better knowledge of contemporary hospital treatments is needed. 2) In addition, most psychiatric disorders emerging during adolescence and early adulthood, it is important to develop accessible care on university campuses. 3) While risk of weight gain and metabolic syndrome under neuroleptics or mood stabilisers is known, there is a need for the development of <red flags> that are easy to identify. A 5% increase in weight during the first month of treatment indicates the risk for important later weight gain.

Radiative Heat Transfer in Boiler Furnaces

Better models are needed for radiative heat transfer in boiler furnaces. If the process is known better, combustion in the furnace can be optimized to produce low emissions. It makes the process to be environmental friendly. Furthermore, if there is a better model of the furnace it can more fully explain what is happening inside the furnace. Using of the model one can quickly and easily analyze how it operates with bio fuels, moist fuels or difficult fuels and improve the operation. Models helps with better estimation of furnace dimensions and result in more accurate understanding of operation. Key component lacking in these models is radiative heat transfer in particle laden gases. If there are no particles than radiative heat transfer can be calculated approximately. There are two problems with current models when used with flow modeling. The first one is a need to account for a particle laden gas and the second one is an absence of a fast algorithm. Fast calculation is needed if radiative heat transfer calculation is done for a large CDF model. Computations slow down if time is required for calculating radiative properties over and over again. This thesis presents a band model for radiative heat transfer in boiler furnaces. Advantage is a quickness of calculation and account of particles in the process.

Calcination of aluminum hydroxide over pressure and residence time

This work investigates the possible effect of pressure and residence time to the reaction of aluminum hydroxide into aluminum oxide. Various pressurized conditions are used as well as the help of various residence times. The aim is to increase the conversion of the reaction with the use of different pressures and residence times. The tests were performed with a laboratory scale fluidized bed reactor at the Outotec R&D Center in Frankfurt. Additional test work such as particle size analysis and differential thermal analysis were also carried out. Some calcined samples were also characterized with X-ray diffraction at the University of Auckland to obtain a reaction pathway when using pressurized conditions. All of the results are then compared with previous results.

Laitepuhdistamon ylijäämäliete ja sen kuiva-ainepitoisuuden nostaminen

Työssä tutkittiin pienpuhdistamon ylijäämälietteen ominaisuuksia ja käyttäytymistä pienpuhdistamon ylijäämälietteen tiivistys- tai kuivausmenetelmän kehittämisen teoriapohjaksi. Työ sisältää myös lietteiden tiivistysmenetelmien kustannustarkastelua. Kokeellisessa osuudessa käytettiin työn teettäjän Oy KWH Pipe Ab:n valmistamien pienpuhdistamojen ylijäämälietettä. Tutkittava ylijäämäliete oli peräisin asukasvastineluvultaan 5–95 pienistä aktiivilietelaitepuhdistamoista. Tiivistys- tai kuivausmenetelmän kehittämisen tarkoituksena on saavuttaa kustannussäästöjä pienpuhdistamon ylijäämälietteen kuljetusmatkojen vähentämisen kautta. Soveltuvia vertailtavia sovelluksia ovat staattiseen laskeuttamiseen perustuvat menetelmät, mekaaniset ruuvi- ja linkokuivaimet, kuivauslava ja flotaatio. Tarkasteltavien menetelmien tuli olla käytöltä ja huollolta sekä käyttökuluiltaan edullisia ja yksinkertaisia. Ylijäämälietteiden ominaisuuksia ja käyttäytymistä tutkittiin kirjallisuuslähteistä ja käytännön kokein. Kokeissa tarkasteltiin ylijäämälietteen laskeutumis- ja nousuominaisuuksia, redox-potentiaalin vaihtelua seisovassa näytteessä ja flotaation onnistumista testattavalle lietteelle. Kokeet tehtiin kullakin kerralla eri ajankohtana otetuille lietenäytteille, käytettyjä puhdistamoja oli useita ja mitoitus, kuormitus sekä jäteveden laatu vaihteli paljon.

Redução seletiva aplicada à especiação de mercúrio em peixes: uma adaptação do método de Magos

In the selective reduction procedure proposed by Magos SnCl2 was used as reductant for inorganic mercury while total mercury was determined after reduction with a mixture of SnCl2 and CdCl2. The difference between total mercury and inorganic mercury determines the content of organic mercury. The procedure of the present work differs of Magos in that the mercury vapour is carried to the absorption cell after magnetic stirring of the solution in the reaction flask; in the Magos procedure, mercury vapour is carried by bubbling the gas in to the solution. In contrast to the Magos procedure this slight modification overcame the necessity of at calibration by analyte addition, saving time and gainning accuracy.

O efeito da granulometria na decrepitação durante a decomposição térmica de calcários e carvão

The use of fluidized bed combustors to burn coal is largely studied to permit the addition of limestone to capture SO2. The particle size for coal and limestone is an important parameter in this process. Thermogravimetry (TG) is used to elucidate the combustion and sulfation processes, but the experimental parameters must be evaluated to be representative in fluidized bed combustors. In the present study the effect of particle size is analyzed in the calcination of limestones and the combustion of coal through the thermogravimetric curve for limestone and derivative thermogravimetric curve for coal. Small peaks representing mass losses between 400 and 500 ºC are observed due to the jumping of particles out of the crucible. This effect, recognized as decrepitation is observed for mid-sized particles provoked by the release of water vapor trapped within their lattice.

Crassostrea patagonica (d'Orbigny, 1842) shell concentrations from the late Miocene Rio Negro province, NE Patagonia, Argentina

The Río Negro Formation (late Miocene-early Pliocene) mainly consists of continental deposits, but it contains a middle member of marine origin. It represents a transgressive-regressive sequence that can be seen at several outcrops along the N Patagonian coast. The taphonomical approach to the El Espigón marine deposits permits the identification of four main layers containing different kinds of skeletal accumulation, which mainly consist of oyster shells [Crassostrea patagonica (D'Orbigny, 1842)]. These concentrations display three different morphologies (pouches, pavements and bouquets) with a different taphonomic signature. These deposits were formed in shallow marine environments influenced by wave activity that produced valve concentrations of different entities. They contain several shell beds that represent event, composite, hiatal to lag skeletal concentrations. Traces of bioturbation in the sediment (Thalassinoides, Teichichnus) and bioerosion on the shells (Entobia, Gastrochaeonolites, Caulostrepsis), and encrusters (cirripeds, bryozoans), are also abundant in the outcrop and consititue common components of these Miocene materials. Layers 1 and 2 of the sequence were deposited in shoreface/foreshore environments at the beginning of a highstand systems tract, while layers 3 and 4 were deposited at the end, or at the beginning of a forced regression, in foreshore environments. A final erosional episode cut the top of the layer 4, which truncated the abundant bioturbaation developed there.

Diagnostiikkamenetelmät höyrykattilan leijukerroksen tilan ja käytettävyysongelmien tunnistamiseksi

Diplomityön tavoitteena oli tutkia höyrykattiloiden leijukerrosten käytettävyysongelmia ja kirjallisuudesta löytyvien diagnostiikkamenetelmien toimivuutta leijukerroksen tilan ja käytettävyysongelmien tunnistamiseksi. Diagnostiikkamenetelmien toimivuutta testattiin VTT:n kiertoleijukoelaitteen prosessimittauksiin perustuen. Analysoinnissa käytettiin prosessimittauksia, jotka ovat yleisesti käytössä energiantuotannon leijukerroskattiloissa. Analysoitavina koeajotapauksina olivat kylmäkokeet partikkelikokojakaumaltaan vaihtelevalle leijutusmateriaalille, tuhkapartikkelien aiheuttama petimateriaalin karkeneminen ja agglomeroituminen, sekä vaihtelevien ajoarvojen vaikutus leijukerroksen hydrodynaamiseen käyttäytymiseen. Kokeellisesta osiosta saaduista tuloksista selvisi leijutusilman tilavuusvirran, petimassan ja partikkelikoon vaikutus analysoitavaan prosessimittaukseen. Tuloksista oli havaittavissa myös kiertävän petimateriaalin ja pohjapedin osuuksien vaikutus mitattuun painesignaaliin. Petipartikkelien agglomeroitumisen ja karkenemisen todettiin lisäävän kiertoleijukoelaitteistossa nousuputken pohjapedin määrää suhteessa kiertävään petimateriaaliin, mikä voitiin havaita painemittauksista.

Model-based study of a chemical-looping combustion process

Chemical-looping combustion (CLC) is a novel combustion technology with inherent separation of the greenhouse gas CO2. The technique typically employs a dual fluidized bed system where a metal oxide is used as a solid oxygen carrier that transfers the oxygen from combustion air to the fuel. The oxygen carrier is looping between the air reactor, where it is oxidized by the air, and the fuel reactor, where it is reduced by the fuel. Hence, air is not mixed with the fuel, and outgoing CO2 does not become diluted by the nitrogen, which gives a possibility to collect the CO2 from the flue gases after the water vapor is condensed. CLC is being proposed as a promising and energy efficient carbon capture technology, since it can achieve both an increase in power station efficiency simultaneously with low energy penalty from the carbon capture. The outcome of a comprehensive literature study concerning the current status of CLC development is presented in this thesis. Also, a steady state model of the CLC process, based on the conservation equations of mass and energy, was developed. The model was used to determine the process conditions and to calculate the reactor dimensions of a 100 MWth CLC system with bunsenite (NiO) as oxygen carrier and methane (CH4) as fuel. This study has been made in Oxygen Carriers and Their Industrial Applications research project (2008 – 2011), funded by the Tekes – Functional Material program. I would like to acknowledge Tekes and participating companies for funding and all project partners for good and comfortable cooperation.

Estudo termogravimétrico do efeito da temperatura e da atmosfera na absorção de dióxido de enxofre por calcário

Thermogravimetry was applied to investigate the effects of temperature and atmosphere on conversion of sulfur dioxide (SO2) absorbed by limestone. Ranges of temperature and particle size were studied, typical of fluidized-bed coal combustion. Isothermal experiments were performed at different temperatures (between 750 and 950 ºC) under local atmospheric pressure (~ 697 mmHg) in dynamic atmospheres of air and nitrogen. The maximum conversion was 29% higher in nitrogen atmosphere than in air atmosphere. The optimum conversion temperature was found at 831 ºC in air atmosphere and at 894 ºC in nitrogen atmosphere.