2 photos of Walter Sanders Residence: top image shows construction as seen from below; bottom image shows framing under construction

Lance Burghardt bracketed his exposures and provided 3 different shots of these items (2 tifs, 1 jpg). Each shares same housescan number, differentiated by suffix 1of3, 2of3, or 3of3....

Sir Robert Peel. From his private papers.

Vol. 1 also issued under title: Sir Robert Peel. In early life, 1788-1812; as Irish Secretary, 1812-1818; and as Secretary of State, 1822-1827.

How to fly; the pilot and his problems,

A development from the author's Flight school manual of the Naval air station at Pensacoln, Fla., written in 1926, later revised and published in 1928 under title: Practical flight tranining.

Frederick the Great, the memoirs of his reader, Henri de Catt (1758-1760)

Translation of: Unterhaltungen mit Friedrich dem Grossen.

Teaching College Writing in a High School Setting: The Impact of Concurrent Enrollment on Teacher Learning and Practice

Thesis (Ph.D.)--University of Washington, 2016-06

Precautionary principles: a jurisdiction-free framework for decision-making under risk

Fundamental principles of precaution are legal maxims that ask for preventive actions, perhaps as contingent interim measures while relevant information about causality and harm remains unavailable, to minimize the societal impact of potentially severe or irreversible outcomes. Such principles do not explain how to make choices or how to identify what is protective when incomplete and inconsistent scientific evidence of causation characterizes the potential hazards. Rather, they entrust lower jurisdictions, such as agencies or authorities, to make current decisions while recognizing that future information can contradict the scientific basis that supported the initial decision. After reviewing and synthesizing national and international legal aspects of precautionary principles, this paper addresses the key question: How can society manage potentially severe, irreversible or serious environmental outcomes when variability, uncertainty, and limited causal knowledge characterize their decision-making? A decision-analytic solution is outlined that focuses on risky decisions and accounts for prior states of information and scientific beliefs that can be updated as subsequent information becomes available. As a practical and established approach to causal reasoning and decision-making under risk, inherent to precautionary decision-making, these (Bayesian) methods help decision-makers and stakeholders because they formally account for probabilistic outcomes, new information, and are consistent and replicable. Rational choice of an action from among various alternatives-defined as a choice that makes preferred consequences more likely-requires accounting for costs, benefits and the change in risks associated with each candidate action. Decisions under any form of the precautionary principle reviewed must account for the contingent nature of scientific information, creating a link to the decision-analytic principle of expected value of information (VOI), to show the relevance of new information, relative to the initial ( and smaller) set of data on which the decision was based. We exemplify this seemingly simple situation using risk management of BSE. As an integral aspect of causal analysis under risk, the methods developed in this paper permit the addition of non-linear, hormetic dose-response models to the current set of regulatory defaults such as the linear, non-threshold models. This increase in the number of defaults is an important improvement because most of the variants of the precautionary principle require cost-benefit balancing. Specifically, increasing the set of causal defaults accounts for beneficial effects at very low doses. We also show and conclude that quantitative risk assessment dominates qualitative risk assessment, supporting the extension of the set of default causal models.

Disaggregation of Microcystis aeruginosa colonies under turbulent mixing: laboratory experiments in a grid-stirred tank

Samples of the cyanobacterium Microcystis aeruginosa from a small pond were used in laboratory experiments with a grid-stirred tank to quantify the effect of turbulent mixing on colony size. Turbulent dissipation in the tank was varied from 10(-9) m(2) s(-3) to 10(-4) m(2) s(-3), covering the range of turbulence intensities experienced by M. aeruginosa colonies in the field and exceeding the maximum dissipation by two orders of magnitude. Large colonies broke up into smaller colonies during the experiments; the mass fraction of colonies with diameter less than 200 mum increased over time. Colony disaggregation was observed to increase with turbulent dissipation. The maximum stable colony diameter across all experiments was in the range 220-420 mum. The overall change in size distribution during the experiments was relatively small, and the colony size distribution remained very broad throughout the experiments. Since colony size affects migration velocity, susceptibility to grazing and surface area to volume ratios, more work is needed to determine how to best represent this broad size distribution when modelling M. aeruginosa populations.

ADOLESCÊNCIA E SEXUALIDADE: UMA ANÁLISE DO DISCURSO DA MÍDIA SEGMENTADA

Esse estudo propõe uma reflexão sobre o tratamento dado ao tema sexualidade nas revistas Atrevida e Capricho, destinadas a adolescentes. Nosso corpus constitui-se de 62 edições, veiculadas nos anos de 1996 e 2006. No contexto social, há uma preocupação crescente com as questões de saúde sexual e reprodutiva, gravidez precoce e aborto inseguro entre os menores de 18 anos. O objetivo do presente trabalho é, portanto, verificar qual é a contribuição dessas revistas adolescentes no que diz respeito à informação e ao esclarecimento sobre sexualidade e indicar se, em virtude do tempo, houve uma variação na forma de tratar o assunto. Também é nosso interesse verificar de que maneira os discursos sobre sexualidade são construídos nestes espaços e, para tanto, utilizamos a análise do discurso como eixo teórico-metodológico. Concluímos que, embora o assunto tenha espaço nas duas revistas, sua cobertura é restrita e não há freqüência ou continuidade nos temas abordados. Nota-se um esforço em esclarecer sobre sexualidade e disseminar comportamentos seguros, porém, a cobertura do temas é feita, em grande parte das vezes, de modo bastante superficial e seguindo padrões de abordagem que não são capazes de abranger o tema em toda a sua complexidade.(AU)

The future of manufacturing

Anyone who looks at the title of this special issue will agree that the intent behind the preparation of this volume was ambitious: to predict and discuss “The Future of Manufacturing”. Will manufacturing be important in the future? Even though some sceptics might say not, and put on the table some old familiar arguments, we would strongly disagree. To bring subsidies for the argument we issued the call-for-papers for this special issue of Journal of Manufacturing Technology Management, fully aware of the size of the challenge in our hands. But we strongly believed that the enterprise would be worthwhile. The point of departure is the ongoing debate concerning the meaning and content of manufacturing. The easily visualised internal activity of using tangible resources to make physical products in factories is no longer a viable way to characterise manufacturing. It is now a more loosely defined concept concerning the organisation and management of open, interdependent, systems for delivering goods and services, tangible and intangible, to diverse types of markets. Interestingly, Wickham Skinner is the most cited author in this special issue of JMTM. He provides the departure point of several articles because his vision and insights have guided and inspired researchers in production and operations management from the late 1960s until today. However, the picture that we draw after looking at the contributions in this special issue is intrinsically distinct, much more dynamic, and complex. Seven articles address the following research themes: 1.new patterns of organisation, where the boundaries of firms become blurred and the role of the firm in the production system as well as that of manufacturing within the firm become contingent; 2.new approaches to strategic decision-making in markets characterised by turbulence and weak signals at the customer interface; 3.new challenges in strategic and operational decisions due to changes in the profile of the workforce; 4.new global players, especially China, modifying the manufacturing landscape; and 5.new techniques, methods and tools that are being made feasible through progress in new technological domains. Of course, many other important dimensions could be studied, but these themes are representative of current changes and future challenges. Three articles look at the first theme: organisational evolution of production and operations in firms and networks. Karlsson's and Skold's article represent one further step in their efforts to characterise “the extraprise”. In the article, they advance the construction of a new framework, based on “the network perspective” by defining the formal elements which compose it and exploring the meaning of different types of relationships. The way in which “actors, resources and activities” are conceptualised extends the existing boundaries of analytical thinking in operations management and open new avenues for research, teaching and practice. The higher level of abstraction, an intrinsic feature of the framework, is associated to the increasing degree of complexity that characterises decisions related to strategy and implementation in the manufacturing and operations area, a feature that is expected to become more and more pervasive as time proceeds. Riis, Johansen, Englyst and Sorensen have also based their article on their previous work, which in this case is on “the interactive firm”. They advance new propositions on strategic roles of manufacturing and discuss why the configuration of strategic manufacturing roles, at the level of the network, will become a key issue and how the indirect strategic roles of manufacturing will become increasingly important. Additionally, by considering that value chains will become value webs, they predict that shifts in strategic manufacturing roles will look like a sequence of moves similar to a game of chess. Then, lastly under the first theme, Fleury and Fleury develop a conceptual framework for the study of production systems in general derived from field research in the telecommunications industry, here considered a prototype of the coming information society and knowledge economy. They propose a new typology of firms which, on certain dimensions, complements the propositions found in the other two articles. Their telecoms-based framework (TbF) comprises six types of companies characterised by distinct profiles of organisational competences, which interact according to specific patterns of relationships, thus creating distinct configurations of production networks. The second theme is addressed by Kyläheiko and SandstroÍm in their article “Strategic options based framework for management of dynamic capabilities in manufacturing firms”. They propose a new approach to strategic decision-making in markets characterised by turbulence and weak signals at the customer interface. Their framework for a manufacturing firm in the digital age leads to active asset selection (strategic investments in both tangible and intangible assets) and efficient orchestrating of the global value net in “thin” intangible asset markets. The framework consists of five steps based on Porter's five-forces model, the resources-based view, complemented by means of the concepts of strategic options and related flexibility issues. Thun, GroÍssler and Miczka's contribution to the third theme brings the human dimension to the debate regarding the future of manufacturing. Their article focuses on the challenges brought to management by the ageing of workers in Germany but, in the arguments that are raised, the future challenges associated to workers and work organisation in every production system become visible and relevant. An interesting point in the approach adopted by the authors is that not only the factual problems and solutions are taken into account but the perception of the managers is brought into the picture. China cannot be absent in the discussion of the future of manufacturing. Therefore, within the fourth theme, Vaidya, Bennett and Liu provide the evidence of the gradual improvement of Chinese companies in the medium and high-tech sectors, by using the revealed comparative advantage (RCA) analysis. The Chinese evolution is shown to be based on capabilities developed through combining international technology transfer and indigenous learning. The main implication for the Western companies is the need to take account of the accelerated rhythm of capability development in China. For other developing countries China's case provides lessons of great importance. Finally, under the fifth theme, Kuehnle's article: “Post mass production paradigm (PMPP) trajectories” provides a futuristic scenario of what is already around us and might become prevalent in the future. It takes a very intensive look at a whole set of dimensions that are affecting manufacturing now, and will influence manufacturing in the future, ranging from the application of ICT to the need for social transparency. In summary, this special issue of JMTM presents a brief, but undisputable, demonstration of the possible richness of manufacturing in the future. Indeed, we could even say that manufacturing has no future if we only stick to the past perspectives. Embracing the new is not easy. The new configurations of production systems, the distributed and complementary roles to be performed by distinct types of companies in diversified networked structures, leveraged by the new emergent technologies and associated the new challenges for managing people, are all themes that are carriers of the future. The Guest Editors of this special issue on the future of manufacturing are strongly convinced that their undertaking has been worthwhile.

Die Sprache des Wahnsinns. Harald Kaas und sein Erzählband ‘Uhren und Meere’:Harald Kaas and his short story collection 'watches and seas'

This essay examines the only book published by the late Harald Kaas. His collection of short stories Uhren und Meere (1979), dealing with depictions of psycho-pathological states of mind, gained Kaas a short-lived notoriety as he himself was a certified schizophrenic possessing first-hand experience of psychiatric treatment. This essay sets out to investigate whether or to what extent the stories in Uhren und Meere can be understood as a document of the language of madness. It concludes that despite the biographical dimension of his schizophrenic experience, Kaas’s texts fail to voice an as it were unadulterated language of madness. However, when read in conjunction with his quasi-poetological interview statements, it is possible to determine the very nature of madness as a collapse of a logical system of language. Meaning that language cannot actively be used to express madness, while at the same time madness can express itself in a language that we necessarily fail to understand. The language of madness manifests itself as the madness of language.

Le prix de l'individualité. Maine de Brian, Samuel Taylor Coleridge et la volonté: Deux postétités distinctes

This thesis is concerned with Maine de Biran’s and Samuel Taylor Coleridge’s conceptions of will, and the way in which both thinkers’ posterities have been affected by the central role of these very conceptions in their respective bodies of thought. The research question that animates this work can therefore be divided into two main parts, one of which deals with will, while the other deals with its effects on posterity. In the first pages of the Introduction, I make the case for a comparison between two philosophers, and show how this comparison can bring one closer to truth, understood not in objective, but in subjective terms. I then justify my choice by underlining that, in spite of their many differences, Maine de Biran and Samuel Taylor Coleridge followed comparable paths, intellectually and spiritually, and came to similar conclusions concerning the essential activity of the human mind. Finally, I ask whether it is possible that this very focus on the human will may have contributed to the state of both thinkers’ works and of the reception of those works. This prologue is followed by five parts. In the first part, the similarities and differences between the two thinkers are explored further. In the second part, the connections between philosophy and singularity are examined, in order to show the ambivalence of the will as a foundation for truth. The third part is dedicated to the traditional division between subject and object in psychology, and its relevance in history and in moral philosophy. The fourth part tackles the complexity of the question of influence, with respect to both Maine de Biran’s and Coleridge’s cases, both thinkers being indebted to many philosophers of all times and places, and having to rely heavily on others for the publication, or the interpretation of their own works. The fifth part is concerned with the different aspects of the faculty of will, and primarily its relationship with interiority, as incommensurability, and actual, conditioned existence in a certain historical and spatial context. It ends with a return to the question of will and posterity and an announcement of what will be covered in the main body of the thesis. The main body is divided into three parts:‘L’émancipation’, ‘L’affirmation, and ‘La projection’. The first part is devoted to the way Maine de Biran and Samuel Taylor Coleridge extricated themselves from one epistemological paradigm to contribute to the foundation of another. It is divided in four chapters. The first chapter deals with the aforementioned change of paradigm, as corresponding to the emergence of two separate but associated movements, Romanticism and what the French philosopher refers to as ‘The Age of History’. The second chapter concerns the movement that preceded them, i.e. the Enlightenment, its main features according to both of our thinkers, and the two epistemological models that prevailed under it and influenced them heavily in their early years: Sensationism (Maine de Biran) and Associationism (Coleridge). The third chapter is about the probable influence of Immanuel Kant and his followers on Maine de Biran and Coleridge, and the various facts that allow us to claim originality for both thinkers’ works. In the fourth chapter, I contrast Maine de Biran and Coleridge with other movements and thinkers of their time, showing that, contrary to their respective thoughts, Maine de Biran and Coleridge could not but break free from the then prevailing systematic approach to truth. The second part of the thesis is concerned with the first part of its research question, namely, Maine de Biran’s and Coleridge’s conceptions of the will. It is divided into four chapters. The first chapter is a reflection on the will as a paradox: on the one hand, the will cannot be caused by any other phenomenon, or it is no longer a will; but it cannot be left purely undetermined, as if it is, it is then not different from chance. It thus needs, in order to be, to be contradictorily already moral. The second chapter is a comparison between Maine de Biran’s and Coleridge’s accounts of the origin of the will, where it is found that the French philosopher only observes that he has a will, whereas the English philosopher postulates the existence of this will. The comparison between Maine de Biran’s and Coleridge’s conceptions of the will is pursued in the third chapter, which tackles the question of the coincidence between the will and the self, in both thinkers’ works. It ends with the fourth chapter, which deals with the question of the relationship between the will and what is other to it, i.e. bodily sensations, passions and desires. The third part of the thesis focuses on the second part of its research question, namely the posterity of Maine de Biran’s and Coleridge’s works. It is divided into four chapters. The first chapter constitutes a continuation of the last chapter of the preceding part, in that that it deals with Maine de Biran’s and Coleridge’s relations to the ‘other’, and particularly their potential and actual audience, and with the way these relations may have affected their writing and publishing practices. The second chapter is a survey of both thinkers’ general reception, where it is found that, while Maine de Biran has been claimed by two important movements of thoughts as their initiator, Coleridge has been neglected by the only real movement he could have, or may indeed have pioneered. The third chapter is more directly concerned with the posterities of Maine de Biran’s and Coleridge’s conceptions of will, and attempts to show that the approach to, and the meaning of the will have evolved throughout the nineteenth century, and in the French Spiritualist and the British Idealist movements, from an essentially personal one to a more impersonal one. The fourth chapter is a partial conclusion, whose aim is to give a precise idea of where Maine de Biran and Coleridge stand, in relation to their century and to the philosophical movements and matters we are concerned with. The conclusion is a recapitulation of what has been found, with a particular emphasis on the dialogue initiated between Maine de Biran and Coleridge on the will, and the relation between will and posterity. It suggests that both thinkers have to pay the price of a problematic reception for the individuality that pervades their respective works, and goes further in suggesting that s/he who chooses to found his individuality on the will is bound to feel this incompleteness in his/her own personal life more acutely than s/he who does not. It ends with a reflection on fixedness and movement, as the two antagonistic states that the theoretician of the will paradoxically aspires to.

The individual and society in the GDR under Honecker : orthodoxy, dissidence and internal debate.

The thesis offers a comparative interdisciplinary approach to the examination of the intellectual debates about the relationship between individual and society in the GDR under Honecker. It shows that there was not only a continuum of debate between the academic disciplines, but also from the radical critics of the GDR leadership such as Robert Havemann, Rudolf Bahro and Stefan Heym through the social scientists, literary critics and legal theorists working in the academic institutions to theorists close to the GDR leadership. It also shows that the official line and policy of the ruling party itself on the question of the individual and society was not static over the period, but changed in response to internal and external pressures. Over the period 1971 - 1989 greater emphasis was placed by many intellectuals on the individual, his needs and interests. It was increasingly recognised that conflicts could exist between the individual and society in GDR socialism. Whereas the radical critics argued that these conflicts were due to features of GDR society, such as the hierarchical system of labour functions and bureaucracy, and extrapolated from this a general conflict between the political leadership and population, orthodox critics argued that conflicts existed between a specific individual and society and were largely due to external and historical factors. The internal critics also pointed to the social phenomena which were detrimental to the individual's development in the GDR, but they put forward less radical solutions. With the exception of a few radical young writers, all theorists studied in this thesis gave precedence to social interests over individual interests and so did not advocate a return to `individualistic' positions. The continuity of sometimes quite controversial discussions in the GDR academic journals and the flexibility of the official line and policy suggests that it is inappropriate to refer to GDR society under Honecker simply as totalitarian, although it did have some totalitarian features. What the thesis demonstrates is the existence of `Teiloffentlichkeiten' in which critical discussion is conducted even as the official, orthodox line is given out for public consumption in the high-circulation media.

Technical entrepreneurship in the UK:an examination of the relationship between the previous occupational background of the technical entrepreneur and the management of the small technology-based venture

With the growing appreciation of the contribution of small technology-based ventures to a healthy economy, an analysis of the individual who initiates and manages such ventures - the technical entrepreneur - is highly desirable, predominantly because of the influence of such an individual on the management and future strategy of the venture. An examination of recent research has indicated that a study of the previous experience and expertise of the entrepreneur, gained in previous occupations, may be highly relevant in determining the possible success of a new venture. This is particularly true where the specific expertise of the entrepreneur forms the main strategic advantage of the business, as in the case of small technology-based firms. Despite this, there has been very little research which has attempted to examine the relationship between the previous occupational background of the technical entrepreneur, and the management of the small technology-based firm. This thesis will examine this relationship, as well as providing an original contribution to the study of technical entrepreneurship in the UK. Consequently, the exploratory nature of the research prompted an inductive qualitative approach being adopted for the thesis. Through a two stage, multiple-site research approach, an examination was made of technical entrepreneurs heading award-winning technology-based small firms in the UK. The main research questions focused on management within the firm, the novelty and origin of the technology adopted, and the personal characteristics of the entrepreneur under study. The results of this study led to the creation of a specific typology for technical entrepreneurs, based on the individual's role in the development of technology within his previous occupation.

Mechanical properties of sheet metal under forming conditions

In the bulge test, a sheet metal specimen is clamped over a circular hole in a die and formed into a bulge by the hydraulic pressure on one side of the specirnen. As the unsupported part of the specimen is deformed in this way, its area is increased, in other words, the material is generally stretched and its thickness generally decreased. The stresses causing this stretching action are the membrane stresses in the shell generated by the hydraulic pressure, in the same way as the rubber in a toy balloon is stretched by the membrane stresses caused by the air inside it. The bulge test is a widely used sheet metal test, to determine the "formability" of sheet materials. Research on this forming process (2)-(15)* has hitherto been almost exclusively confined to predicting the behaviour of the bulged specimen through the constitutive equations (stresses and strains in relation to displacements and shapes) and empirical work hardening characteristics of the material as determined in the tension test. In the present study the approach is reversed; the stresses and strains in the specimen are measured and determined from the geometry of the deformed shell. Thus, the bulge test can be used for determining the stress-strain relationship in the material under actual conditions in sheet metal forming processes. When sheet materials are formed by fluid pressure, the work-piece assumes an approximately spherical shape, The exact nature and magnitude of the deviation from the perfect sphere can be defined and measured by an index called prolateness. The distribution of prolateness throughout the workpiece at any particular stage of the forming process is of fundamental significance, because it determines the variation of the stress ratio on which the mode of deformation depends. It is found. that, before the process becomes unstable in sheet metal, the workpiece is exactly spherical only at the pole and at an annular ring. Between the pole and this annular ring the workpiece is more pointed than a sphere, and outside this ring, it is flatter than a sphere. In the forming of sheet materials, the stresses and hence the incremental strains, are closely related to the curvatures of the workpiece. This relationship between geometry and state of stress can be formulated quantitatively through prolateness. The determination of the magnitudes of prolateness, however, requires special techniques. The success of the experimental work is due to the technique of measuring the profile inclination of the meridional section very accurately. A travelling microscope, workshop protractor and surface plate are used for measurements of circumferential and meridional tangential strains. The curvatures can be calculated from geometry. If, however, the shape of the workpiece is expressed in terms of the current radial (r) and axial ( L) coordinates, it is very difficult to calculate the curvatures within an adequate degree of accuracy, owing to the double differentiation involved. In this project, a first differentiation is, in effect, by-passed by measuring the profile inclination directly and the second differentiation is performed in a round-about way, as explained in later chapters. The variations of the stresses in the workpiece thus observed have not, to the knowledge of the author, been reported experimentally. The static strength of shells to withstand fluid pressure and their buckling strength under concentrated loads, both depend on the distribution of the thickness. Thickness distribution can be controlled to a limited extent by changing the work hardening characteristics of the work material and by imposing constraints. A technique is provided in this thesis for determining accurately the stress distribution, on which the strains associated with thinning depend. Whether a problem of controlled thickness distribution is tackled by theory, or by experiments, or by both combined, the analysis in this thesis supplies the theoretical framework and some useful experimental techniques for the research applied to particular problems. The improvement of formability by allowing draw-in can also be analysed with the same theoretical and experimental techniques. Results on stress-strain relationships are usually represented by single stress-strain curves plotted either between one stress and one strain (as in the tension or compression tests) or between the effective stress and effective strain, as in tests on tubular specimens under combined tension, torsion and internal pressure. In this study, the triaxial stresses and strains are plotted simultaneously in triangular coordinates. Thus, both stress and strain are represented by vectors and the relationship between them by the relationship between two vector functions. From the results so obtained, conclusions are drawn on both the behaviour and the properties of the material in the bulge test. The stress ratios are generally equal to the strain-rate ratios (stress vectors collinear with incremental strain vectors) and the work-hardening characteristics, which apply only to the particular strain paths are deduced. Plastic instability of the material is generally considered to have been reached when the oil pressure has attained its maximum value so that further deformation occurs under a constant or lower pressure. It is found that the instability regime of deformation has already occurred long before the maximum pressure is attained. Thus, a new concept of instability is proposed, and for this criterion, instability can occur for any type of pressure growth curves.