Inferior frontal gyrus white matter abnormalities in obsessive-compulsive disorder

The aim of the present study is to explore obsessive-compulsive disorder (OCD)-related abnormalities in white matter connectivity in OCD for a core region associated with inhibitory control [i.e. inferior frontal gyrus (IFG)]. Fifteen patients with OCD (11 men) and 15 healthy controls (nine men) underwent diffusion tensor imaging scanning to study four diffusivity indexes of white matter integrity [fractional anisotropy, mean diffusivity (MD), axial diffusivity and radial diffusivity (RD)]. The results showed that persons with OCD manifested significantly lower fractional anisotropy levels in the bilateral IFG as well as its parcellations in the pars opercularis, pars triangularis, and pars orbitalis. Significantly higher levels of MD, RD were evident for the OCD group in the IFG as a whole as well as in the bilateral subregions of the pars triangularis and pars opercularis (for MD and RD), the right side of the pars orbitalis (for RD), and the left side of the pars triangularis and right side pars opercularis (for axial diffusivity). Overall, the results suggest significant alterations in structural connectivity, probably associated with myelination and axonal abnormalities in the IFG of OCD patients.

Effects of light and temperature on isoprene emission at different leaf developmental stages of eschweilera coriacea in central Amazon

Isoprene emission from plants accounts for about one third of annual global volatile organic compound emissions. The largest source of isoprene for the global atmosphere is the Amazon Basin. This study aimed to identify and quantify the isoprene emission and photosynthesis at different levels of light intensity and leaf temperature, in three phenological phases (young mature leaf, old mature leaf and senescent leaf) of Eschweilera coriacea (Matamatá verdadeira), the species with the widest distribution in the central Amazon. In situ photosynthesis and isoprene emission measurements showed that young mature leaf had the highest rates at all light intensities and leaf temperatures. Additionally, it was observed that isoprene emission capacity (Es) changed considerably over different leaf ages. This suggests that aging leads to a reduction of both leaf photosynthetic activity and isoprene production and emission. The algorithm of Guenther et al. (1999) provided good fits to the data when incident light was varied, however differences among E S of all leaf ages influenced on quantic yield predicted by model. When leaf temperature was varied, algorithm prediction was not satisfactory for temperature higher than ~40 °C; this could be because our data did not show isoprene temperature optimum up to 45 °C. Our results are consistent with the hypothesis of the isoprene functional role in protecting plants from high temperatures and highlight the need to include leaf phenology effects in isoprene emission models.

Implementation and validation of a strain rate dependent anisotropic continuum model for masonry

A newly developed strain rate dependent anisotropic continuum model is proposed for impact and blast applications in masonry. The present model adopted the usual approach of considering different yield criteria in tension and compression. The analysis of unreinforced block work masonry walls subjected to impact is carried out to validate the capability of the model. Comparison of the numerical predictions and test data revealed good agreement. Next, a parametric study is conducted to evaluate the influence of the tensile strengths along the three orthogonal directions and of the wall thickness on the global behavior of masonry walls.

Updated List and identification key of 219 tree species of white sand forests of the Allpahuayo Mishana National Reserve, Loreto, Peru

White sand forests, although low in nutrients, are characterized not only by several endemic species of plants but also by several monodominant species. In general, plants in this forest have noticeably thin stems. The aim of this work was to elaborate a parallel dichotomous key for the identification of Angiosperm tree species occurring on white sand forests at the Allpahuayo Mishana National Reserve, Loreto, Peru. We compiled a list of species from several publications in order to have the most comprehensive list of species that occur on white sand forest. We found 219 species of Angiosperm, the more abundant species were Pachira brevipes (26.27%), Caraipa utilis (17.90%), Dicymbe uaiparuensis (13.27%), Dendropanax umbellatus (3.28%), Sloanea spathulata (2.52%), Ternstroemia klugiana (2.30%), Haploclathra cordata (2.28%), Parkia igneiflora (1.20%), Emmotum floribundum (1.06%), Ravenia biramosa (1.04%) among others. Most species of white sand forests can be distinguished using characteristics of stems, branches and leaves. This key is very useful for the development of floristic inventories and related projects on white sand forests from Allpahuayo Mishana National Reserve.

Search for new light gauge bosons in Higgs boson decays to four-lepton final states in pp collisions at s√=8TeV with the ATLAS detector at the LHC

This paper presents a search for Higgs bosons decaying to four leptons, either electrons or muons, via one or two light exotic gauge bosons Zd, H→ZZd→4ℓ or H→ZdZd→4ℓ. The search was performed using pp collision data corresponding to an integrated luminosity of about 20 fb−1 at the center-of-mass energy of s√=8TeV recorded with the ATLAS detector at the Large Hadron Collider. The observed data are well described by the Standard Model prediction. Upper bounds on the branching ratio of H→ZZd→4ℓ and on the kinetic mixing parameter between the Zd and the Standard Model hypercharge gauge boson are set in the range (1--9)×10−5 and (4--17)×10−2 respectively, at 95% confidence level assuming the Standard Model branching ratio of H→ZZ∗→4ℓ, for Zd masses between 15 and 55 GeV. Upper bounds on the effective mass mixing parameter between the Z and the Zd are also set using the branching ratio limits in the H→ZZd→4ℓ search, and are in the range (1.5--8.7)×10−4 for 15

Light responsive multilayer surfaces with controlled spatial extinction capability

Multilayer systems obtained using the Layer-by-Layer (LbL) technology have been proposed for a variety of biomedical applications in tissue engineering and regenerative medicine. LbL assembly is a simple and highly versatile method to modify surfaces and fabricate robust and highly-ordered nanostructured coatings over almost any type of substrates and with a wide range of substances. The incorporation of polyoxometalate (POM) inorganic salts as constituents of the layers presents a possibility of promoting light-stimuli responses in LbL substrates. We propose the design of a biocompatible photo-responsive multilayer system based on a Preyssler-type POM ([NaP5W30O110]14â ) and a natural origin polymer, chitosan, using the LbL methodology. The photo-reduction properties of the POM allow the spatially controlled disruption of the assembled layers due to the weakening of the electrostatic interactions between the layers. This system has found applicability in detaching devices, such as the cell sheet technology, which may solve the drawbacks actually found in other cell treatment proposals.

Desenvolvimento e avaliação das propriedades psicométricas da versão brasileira do Addiction Severity Index 6 (ASI-6) Light

Objetivo Desenvolver e avaliar as propriedades psicométricas de uma versão brasileira reduzida do Addiction Severity Index 6 Light (ASI-6 Light) previamente proposta com base em um estudo de validação dos construtos do instrumento e desenvolver os novos escores de cada área do instrumento baseados na Teoria de Resposta ao Item (TRI). Métodos Foram entrevistados 200 sujeitos, 100 com uso problemático de álcool e outras drogas e 100 sem uso problemático. Foram calculados os escores dos indivíduos com base na TRI. As propriedades psicométricas foram avaliadas pela correlação entre os escores do ASI-6 Light e do Alcohol, Smoking and Substance Involvement Screening Test (ASSIST), padrão-ouro do estudo. Foram avaliados os índices de sensibilidade e especificidade. Resultados Foi encontrada alta correlação entre os escores da área “álcool” do ASI-6 Light e os escores do ASSIST em relação ao álcool (r = 0,79), correlações moderadas em relação ao tabaco (r = 0,47) e cocaína/crack (r = 0,44) e baixa (r = 0,39) em relação à maconha. Ao correlacionarem-se os escores do ASSIST e os escores da área “drogas” do ASI-6 Light, obteve-se alta correlação em relação à cocaína/crack (r = 0,85), correlações moderadas em relação ao tabaco (r = 0,57) e maconha (r = 0,68) e baixa (r = 0,29) em relação ao álcool. A área sob a curva ROC da área “álcool” foi de 0,93 e a da área “drogas” foi de 0,88. Conclusão Boas evidências de validade das áreas “álcool” e “drogas” foram apresentadas. Essa nova versão tornou-se um instrumento de fácil manejo e de rápida aplicação, contendo os itens que melhor avaliam a gravidade de problemas.

Removal of ochratoxin A from contaminated white and red wines using oenological fining agents

Mycotoxins are toxic secondary metabolites produced by certain moulds, being ochratoxin A (OTA) one of the most relevant. Its chemical structure is a dihydro-isocoumarin connected at the 7-carboxy group to a molecule of L--phenylalanine via an amide bond. OTA contamination of wines might be a risk to consumer health, thus requiring treatments to achieve acceptable standards for human consumption [1]. According to the Regulation No. 1881/2006 of the European Commission, the maximum limit for OTA in wine is 2 µg/kg [2]. Therefore, the aim of this work was to know the effect of different fining agents on OTA removal, as well as their impact on white and red wine physicochemical characteristics. To evaluate their efficiency, 11 commercial fining agents (mineral, synthetic, animal and vegetable proteins) were used to get new approaches on OTA removal from white and red wines. Trials were performed in wines artificially supplemented (at a final concentration of 10 µg/L) with OTA. The most effective fining agent in removing OTA (80%) from white wine was a commercial formulation that contains gelatine, bentonite and activated carbon. Removals between 10-30% were obtained with potassium caseinate, yeast cell walls and pea protein. With bentonites, carboxymethylcellulose, polyvinylpolypyrrolidone and chitosan no considerable OTA removal was verified. In red wine, removals between 6-19% were obtained with egg albumin, yeast cell walls, pea protein, isinglass, gelatine, polyvinylpolypyrrolidone and chitosan. The most effective fining agents in removing OTA from red wine were an activated carbon (66%) followed again by the commercial formulation (55%), being activated carbon a well-known adsorbent of mycotoxins. These results may provide useful information for winemakers, namely for the selection of the most appropriate oenological product for OTA removal, reducing wine toxicity and simultaneously enhancing food safety and wine quality.

Analytical evaluation of fining treatments for white wines contaminated by Ochratoxin A

Mycotoxins are toxic secondary metabolites produced by certain molds. Ochratoxin A (OTA) is one of the most relevant. Its chemical structure is a dihydro-isocoumarin connected at the 7-carboxy group to a molecule of L--phenylalanine via an amide bond. OTA in wine is a risk to consumer health [1]. According to the Regulation No. 123/2005 of the European Commission, the maximum limit for OTA in wine is 2 µg/kg [2]. Then, it is important to control its occurrence. So, the aim of this work was to know the effect of different fining agents on OTA removal from white wine.

Food safety in wine: removal of ochratoxin A in contaminated white wine using commercial fining agents

The presence of mycotoxins in foodstuff is a matter of concern for food safety. Mycotoxins are toxic secondary metabolites produced by certain molds, being ochratoxin A (OTA) one of the most relevant. Wines can also be contaminated with these toxicants. Several authors have demonstrated the presence of mycotoxins in wine, especially ochratoxin A (OTA) [1]. Its chemical structure is a dihydro-isocoumarin connected at the 7-carboxy group to a molecule of L--phenylalanine via an amide bond. As these toxicants can never be completely removed from the food chain, many countries have defined levels in food in order to attend health concerns. OTA contamination of wines might be a risk to consumer health, thus requiring treatments to achieve acceptable standards for human consumption [2]. The maximum acceptable level of OTA in wines is 2.0 g/kg according to the Commission regulation No. 1881/2006 [3]. Therefore, the aim of this work was to reduce OTA to safer levels using different fining agents, as well as their impact on white wine physicochemical characteristics. To evaluate their efficiency, 11 commercial fining agents (mineral, synthetic, animal and vegetable proteins) were used to get new approaches on OTA removal from white wine. Trials (including a control without addition of a fining agent) were performed in white wine artificially supplemented with OTA (10 µg/L). OTA analysis were performed after wine fining. Wine was centrifuged at 4000 rpm for 10 min and 1 mL of the supernatant was collected and added of an equal volume of acetonitrile/methanol/acetic acid (78:20:2 v/v/v). Also, the solid fractions obtained after fining, were centrifuged (4000 rpm, 15 min), the resulting supernatant discarded, and the pellet extracted with 1 mL of the above solution and 1 mL of H2O. OTA analysis was performed by HPLC with fluorescence detection according to Abrunhosa and Venâncio [4]. The most effective fining agent in removing OTA (80%) from white wine was a commercial formulation that contains gelatine, bentonite and activated carbon. Removals between 10-30% were obtained with potassium caseinate, yeast cell walls and pea protein. With bentonites, carboxymethylcellulose, polyvinylpolypyrrolidone and chitosan no considerable OTA removal was verified. Following, the effectiveness of seven commercial activated carbons was also evaluated and compared with the commercial formulation that contains gelatine, bentonite and activated carbon. The different activated carbons were applied at the concentration recommended by the manufacturer in order to evaluate their efficiency in reducing OTA levels. Trial and OTA analysis were performed as explained previously. The results showed that in white wine all activated carbons except one reduced 100% of OTA. The commercial formulation that contains gelatine, bentonite and activated carbon (C8) reduced only 73% of OTA concentration. These results may provide useful information for winemakers, namely for the selection of the most appropriate oenological product for OTA removal, reducing wine toxicity and simultaneously enhancing food safety and wine quality.

Ebstein's anomaly with coarctation of the aorta. An unusual association

Ebstein's anomaly with coarctation of the aorta is an extremely unusual condition. In this report, the clinical and surgical features of 3 male patients, aged 7 months, 4 years and 14 years, are discussed. All patients were in situs solitus. The first 2 patients had atrioventricular and ventriculoarterial discordance and progressed to heart failure in the neonatal period. The third had atrioventricular and ventriculoarterial concordance, as well as Wolf-Parkinson-White syndrome, with frequent episodes of paroxysmal tachycardia. The 3 patients underwent surgery for correction of the coarctation of the aorta. The patient with atrioventricular and ventriculoarterial concordance underwent tricuspid valvuloplasty using a DeVega-like technique. In addition, ablation of 2 anomalous pathways (Kent bundle), which were detected by the electrophysiologic study, was also subsequently performed. The 3 patients showed a good postoperative outcome for 2 years, although, in those with discordance, the surgical procedure did not influence the dysplasia of the tricuspid valve, because this valve showed light to moderate dysfunction.

White-coat hypertension and normotension in the League of Hypertension of the Hospital das Clínicas, FMUSP: prevalence, clinical and demographic characteristics

OBJECTIVE: To assess the prevalence of white-coat normortension, white-coat hypertension, and white-coat effect. METHODS: We assessed 670 medical records of patients from the League of Hypertension of the Hospital das Clínicas of the Medical School of the University of São Paulo. White-coat hypertension (blood pressure at the medical office: mean of 3 measurements with the oscillometric device ³140 or ³90 mmHg, or both, and ambulatory blood pressure monitoring mean during wakefulness < 135/85) and white-coat normotension (office blood pressure < 140/90 and blood pressure during wakefulness on ambulatory blood pressure monitoring ³ 135/85) were analyzed in 183 patients taking no medication. The white-coat effect (difference between office and ambulatory blood pressure > 20 mmHg for systolic and 10 mmHg for diastolic) was analyzed in 487 patients on treatment, 374 of whom underwent multivariate analysis to identify the variables that better explain the white-coat effect. RESULTS: Prevalence of white-coat normotension was 12%, prevalence of white-coat hypertension was 20%, and prevalence of the white-coat effect was 27%. A significant correlation (p<0.05) was observed between white-coat hypertension and familial history of hypertension, and between the white-coat effect and sex, severity of the office diastolic blood pressure, and thickness of left ventricular posterior wall. CONCLUSION: White-coat hypertension, white-coat normotension, and white-coat effect should be considered in the diagnosis of hypertension.

Síndrome de Wolff-Parkinson-White associada a comunicação interatrial tipo seio venoso

A associação de comunicação interatrial (CIA) tipo seio venoso com síndrome de Wolff Parkinson White (WPW) é muito rara e ainda não descrita na literatura médica especializada. Descreve-se o caso de uma jovem portadora dessa associação de patologias tratada com ablação da via acessória por radiofreqüência, seguida de correção cirúrgica do defeito do septo interatrial.