Benthic foraminifera across the Cretaceous/Paleogene boundary in the Southern Ocean

The impact of an asteroid at the Cretaceous/Paleogene (K/Pg) boundary triggered dramatic biotic, biogeochemical and sedimentological changes in the oceans that have been intensively studied. Paleo-biogeographical differences in the biotic response to the impact and its environmental consequences, however, have been less well documented. We present a high-resolution analysis of benthic foraminiferal assemblages at Southern Ocean ODP Site 690 (Maud Rise, Weddell Sea, Antarctica). At this high latitude site, late Maastrichtian environmental variability was high, but benthic foraminiferal assemblages were not less diverse than at lower latitudes, in contrast to those of planktic calcifiers. Also in contrast to planktic calcifiers, benthic foraminifera did not suffer significant extinction at the K/Pg boundary, but show transient assemblage changes and decreased diversity. At Site 690, the extinction rate was even lower (~3%) than at other sites. The benthic foraminiferal accumulation rate varied little across the K/Pg boundary, indicating that food supply to the sea floor was affected to a lesser extent than at lower latitude sites. Compared to Maastrichtian assemblages, Danian assemblages have a lower diversity and greater relative abundance of heavily calcified taxa such as Stensioeina beccariiformis and Paralabamina lunata. This change in benthic foraminiferal assemblages could reflect post-extinction proliferation of different photosynthesizers (thus food for the benthos) than those dominant during the Late Cretaceous, therefore changes in the nature rather than in the amount of the organic matter supplied to the seafloor. However, severe extinction of pelagic calcifiers caused carbonate supersaturation in the oceans, thus might have given competitive advantage to species with large, heavily calcified tests. This indirect effect of the K/Pg impact thus may have influenced the deep-sea dwellers, documenting the complexity of the effects of major environmental disturbance.

Southern Ocean CO2 uptake and buffer factor from model run 2012-2100, with links to model results

The Southern Ocean is a key region for global carbon uptake and is characterised by a strong seasonality with the annual CO2 uptake being mediated by biological carbon draw-down in summer. Here, we show that the contribution of biology to CO2 uptake will become even more important until 2100. This is the case even if biological production remains unaltered and can be explained by the decreasing buffer capacity of the ocean as its carbon content increases. The same amount of biological carbon draw-down leads to a more than twice as large reduction in CO2 (aq) concentration and hence to a larger CO2 gradient between ocean and atmosphere that drives the gas-exchange. While the winter uptake south of 44°S changes little, the summer uptake increases largely and is responsible for the annual mean response. The combination of decreasing buffer capacity and strong seasonality of biological carbon draw-down introduces a strong and increasing seasonality in the anthropogenic carbon uptake.

Impact of CO2-driven acidification on the development of the sea cucumber Apostichopus japonicus (Selenka) (Echinodermata: Holothuroidea)

We evaluated the impact of ocean acidification on the early development of sea cucumber Apostichopus japonicus. The effect of pH-levels (pH 8.04, 7.85, 7.70 and 7.42) were tested on post-fertilization success, developmental (stage duration) and growth rates. Post-fertilization success decreased linearly with pH leading to a 6% decrease at pH 7.42 as compared to pH 8.1. The impact of pH on developmental time was stage-dependent: (1) stage duration increased linearly with decreasing pH in early-auricularia stage; (2) decreased linearly with decreasing pH in the mid-auricularia stage; but (3) pH decline had no effect on the late-auricularia stage. At the end of the experiment, the size of doliolaria larvae linearly increased with decreasing pH. In conclusion, a 0.62 unit decrease in pH had relatively small effects on A. japonicus early life-history compared to other echinoderms, leading to a maximum of 6% decrease in post-fertilization success and subtle effects on growth and development.

Politics of the 1945 Constitution:Democratization and Its Impact on Political Institutions in Indonesia

Introduction : Before 1998, no one could think about the amendment of the 1945 Constitution. The 1945 Constitution was a product of nationalist who had hard fought for independence from the Dutch colonization. This historical background made it the symbol of independence of the Indonesian nation. Thus, it has been considered as forbidden to touch contents of the 1945 Constitution whereas political leaders have legitimized their authoritarian rulership by utilizing a symbolic character of the Constitution. With the largest political turmoil since its independence, that is, a breakdown of authoritarian regime and democratic transformation in 1998-1999, however, a myth of the "sacred and inviolable" constitution has disappeared. A new theme has then aroused: how can the 1945 Constitution be adapted for a new democratic regime in Indonesia? 　　　The Indonesian modern state has applied the 1945 Constitution as the basic law since its independence in 1945, except for around 10 years in the 1950s. In the period of independence struggle, contrary to the constitutional provision that a kind of presidential system is employed, a cabinet responsible for the Central National Committee was installed. Politics under this institution was in practice a parliamentary system of government. After the Dutch transferred sovereignty to Indonesia in 1949, West European constitutionalism and party politics under a parliamentary system was fully adopted with the introduction of two new constitutions: the 1949 Constitution of Federal Republic of Indonesia and the 1950 Provisional Constitution of Republic of Indonesia. Since a return from the 1950 Constitution to the 1945 Constitution was decided with the Presidential Decree in 1959, the 1945 Constitution had supported two authoritarian regimes of Soekarno's "Guided Democracy" and Soeharto's "New Order" as a legal base. When the 32-year Soeharto's government fell down and democratization started in 1998, the 1945 Constitution was not replaced with a new one, as seen in many other democratizing countries, but successively reformed to adapt itself to a new democratic regime. In the result of four constitutional amendments in 1999-2002, political institutions in Indonesia are experiencing a transformation from an authoritative structure, in which the executive branch monopolized power along with incompetent legislative and judicial branches, to a modern democratic structure, in which the legislative branch can maintain predominance over the executive. However, as observed that President Abdurrahman Wahid, the first president ever elected democratically in Indonesian history, was impeached after one and a half years in office, democratic politics under a new political institution has never been stable. 　　　Under the 1945 Constitution, how did authoritarian regimes maintain stability? Why can a democratic regime not achieve its stability? What did the two constitutional amendments in the process of democratization change? In the first place, how did the political institutions stipulated by the 1945 Constitution come out? Through answering the above questions, this chapter intends to survey the historical continuity and change of political institutions in Indonesia along with the 1945 Constitutions and to analyze impact of regime transformation on political institutions. First, we examine political institutions stipulated by the original 1945 Constitution as well as historical and philosophical origins of the constitution. Second, we search constitutional foundations in the 1945 Constitution that made it possible for Soekarno and Soeharto to establish and maintain authoritarian regimes. Third, we examine contents of constitutional amendments in the process of democratization since 1998. Fourth, we analyze new political dynamics caused by constitutional changes, looking at the impeachment process of President Abdurrahman Wahid. Finally, we consider tasks faced by Indonesia that seeks to establish a stable democracy.

An Experimental and Numerical Study of Ballistic Impacts on a Turbine Casing Material at Varying Temperatures

An experimental and numerical study of ballistic impacts on steel plates at various temperatures (700ºC, 400ºC and room temperature) has been carried out. The motivation for this work is the blade‐off event that may occur inside a jet engine turbine. However, as a first attempt to understand this complex loading process, a somewhat simpler approach is carried out in the present work. The material used in this study is the FV535 martensitic stainless steel, which is one of the most commonly used materials for turbine casings. Based on material test data, a Modified Johnson‐Cook (MJC) model was calibrated for numerical simulations using the LS‐DYNA explicit finite element code (see Figure 1). To check the mesh size sensitivity, 2D axisymmetric finite element models with three different mesh sizes and configurations were used for the various temperatures. Two fixed meshes with 64 and 128 elements over the 2mm thick plate and one mesh with 32 elements over the thickness with adaptive remeshing were used in the simulations. The formation of adiabatic shear bands in the perforation process has been found critical in order to achieve good results. Adiabatic shear bands are formed by the temperature rise due to the accumulation of plastic strain during impact (see Figure 2). The influence of the thermal softening in the plastic model has hence been analyzed for the room temperature impact tests, where the temperature gradient is highest

Making Transport Safer: V2V-Based Automated Emergency Braking System

An important goal in the field of intelligent transportation systems (ITS) is to provide driving aids aimed at preventing accidents and reducing the number of traffic victims. The commonest traffic accidents in urban areas are due to sudden braking that demands a very fast response on the part of drivers. Attempts to solve this problem have motivated many ITS advances including the detection of the intention of surrounding cars using lasers, radars or cameras. However, this might not be enough to increase safety when there is a danger of collision. Vehicle to vehicle communications are needed to ensure that the other intentions of cars are also available. The article describes the development of a controller to perform an emergency stop via an electro-hydraulic braking system employed on dry asphalt. An original V2V communication scheme based on WiFi cards has been used for broadcasting positioning information to other vehicles. The reliability of the scheme has been theoretically analyzed to estimate its performance when the number of vehicles involved is much higher. This controller has been incorporated into the AUTOPIA program control for automatic cars. The system has been implemented in Citroën C3 Pluriel, and various tests were performed to evaluate its operation.

Flow and fracture behaviour of FV535 steel at different triaxialities, strain rates and temperatures

The new generation jet engines operate at highly demanding working conditions. Such conditions need very precise design which implies an exhaustive study of the engine materials and behaviour in their extreme working conditions. With this purpose, this work intends to describe a numerically-based calibration of the widely-used Johnson–Cook fracture model, as well as its validation through high temperature ballistic impact tests. To do so, a widely-used turbine casing material is studied. This material is the Firth Vickers 535 martensitic stainless steel. Quasi-static tensile tests at various temperatures in a universal testing machine, as well as dynamic tests in a Split Hopkinson Pressure Bar, are carried out at different triaxialities. Using ABAQUS/Standard and LS-DYNA numerical codes, experimental data are matched. This method allows the researcher to obtain critical data of equivalent plastic strain and triaxility, which allows for more precise calibration of the Johnson–Cook fracture model. Such enhancement allows study of the fracture behaviour of the material across its usage temperature range.

Differences in the structural response of 'granny-smith' apples under mechanical impact and compression

Apple fruits, cv. Granny Smith, were subjected to mechanical impact and compression loads utilizing a steel rod with a spherical tip 19 mm diameter, 50.6 g mass. Energies applied were low enough to produce enzymatic reaction: 0.0120 J for impact, and 0.0199 J for compression. Bruised material was cut and examined with a transmission electron microscope. In both compression and impact, bruises showed a central region located in the flesh parenchyma, at a distance that approximately equalled the indentor tip radius. The parenchyma cells of this region were more altered than cells from the epidermis and hypodermis. Tissues under compression presented numerous deformed parenchyma cells with broken tonoplasts and tissue degradation as predicted by several investigators. The impacted cells supported different kinds of stresses than compressed cells, resulting in the formation of intensive vesiculation, either in the vacuole or in the middle lamella region between cell walls of adjacent cells. A large proportion of parenchyma cells completely split or had initiated splitting at the middle lamella. Bruising may develop with or without cell rupture. Therefore, cell wall rupture is not essential for the development of a bruise, at least the smallest one, as predicted previously

Bruise Development and Fruit Response of Pear (cv.'Blanquilla') under Impact Conditions

Pear fruits cv. 'Blanquilla', at various ripening stages, were studied under impact conditions. A 50-6-g spherical steel indentator, with a radius of curvature of 0-94 cm, was dropped on to the fruit from three heights: 4, 6 and 10 cm (0-0199, 0-0299 and 0-0499 J). The variables measured were analyzed. All variables were observed to be related to the impact energy except impact duration, which was related to the fruit firmness. Bruising correlated with impact energy when considering different heights, but not with any specific variable when studying the impact phenomenon at individual heights; however, there was a clear correlation between impact bruising and firmness. Three bruise shapes were observed, corresponding to preclimacteric, climacteric and postclimacteric fruits; a theory for this response is offered. According to the results, the impact response in postclimacteric pear fruits (with firmness values of less than 25 N, and a maturity index above 55) may be explained by the role played by the skin rather than by the pulp.