Assessment of the teaching-learning process in students of the health area: cardiopulmonary resuscitation maneuvers

OBJECTIVETo evaluate the skills and knowledge of undergraduate students in the health area on cardiopulmonary resuscitation maneuvers with the use of an automatic external defibrillator.METHODThe evaluation was performed in three different stages of the teaching-learning process. A theoretical and practical course was taught and the theoretical classes included demonstration. The evaluation was performed in three different stages of the teaching-learning process. Two instruments were applied to evaluate the skills (30-items checklist) and knowledge (40-questions written test). The sample comprised 84 students.RESULTSAfter the theoretical and practical course, an increase was observed in the number of correct answers in the 30-items checklist and 40-questions written test.CONCLUSIONAfter the theoretical class (including demonstration), only one of the 30-items checklist for skills achieved an index ≥ 90% of correct answers. On the other hand, an index of correct answers greater than 90% was achieved in 26 (86.7%) of the 30 items after a practical training simulation, evidencing the importance of this training in the defibrillation procedure.

Managers' perspective on continuous health education in a region of São Paulo State

OBJECTIVEAnalysing the concepts of Continuous Health Education - CHE (EPS - in Portuguese), operated by municipal managers and translated into official documents.METHODQualitative research with the use of official documents and semi-structured interviews with the Municipal Health Secretaries or Coordinators of Primary Health Care in the Northeast Region of São Paulo State, and thematic analysis of empirical material.RESULTSResults indicate difficulties in the municipalities problematizing their management practices, services and health care; EPS tools presented are insufficient and unsatisfactory for amending the array of problems raised and are still far from the routine of Primary Care services.CONCLUSIONDespite efforts to implement EPS actions for the strengthening of primary care, the process appears to be incipient.

Workloads and strain process in Community Health Agents

ABSTRACT OBJECTIVE To identify the workloads present in the work activities of community health agents (CHAs) and the resulting strain processes. METHOD A descriptive, exploratory, cross-sectional and quantitative study conducted with 137 CHAs. Data were collected through a questionnaire and interview guided by the health surveillance software called SIMOSTE (Health Monitoring System of Nursing Workers), following the ethical codes of the current law. RESULTS In total, were identified 140 workloads involved in 122 strain processes, represented by the occurrence of health problems of the CHAs. The mechanical (55.00%) and biological (16.43%) loads stood out. The most common strain processes were the external causes of morbidity and mortality (62.31%) and diseases of the musculoskeletal system and connective tissue (10.66%). CONCLUSION From the identified overloads, it became evident that all workloads are present in the work process of CHAs, highlighting the mechanical load, represented mainly by external causes of morbidity and mortality that are related to occupational accidents.

Molecular machines governing exocytosis of synaptic vesicles.

Calcium-dependent exocytosis of synaptic vesicles mediates the release of neurotransmitters. Important proteins in this process have been identified such as the SNAREs, synaptotagmins, complexins, Munc18 and Munc13. Structural and functional studies have yielded a wealth of information about the physiological role of these proteins. However, it has been surprisingly difficult to arrive at a unified picture of the molecular sequence of events from vesicle docking to calcium-triggered membrane fusion. Using mainly a biochemical and biophysical perspective, we briefly survey the molecular mechanisms in an attempt to functionally integrate the key proteins into the emerging picture of the neuronal fusion machine.

Validation of the New Mix Design Process for Cold In-Place Rehabilitation Using Foamed Asphalt, 2007

Asphalt pavement recycling has grown dramatically over the last few years as a viable technology to rehabilitate existing asphalt pavements. Iowa's current Cold In-place Recycling (CIR) practice utilizes a generic recipe specification to define the characteristics of the CIR mixture. As CIR continues to evolve, the desire to place CIR mixture with specific engineering properties requires the use of a mix design process. A new mix design procedure was developed for Cold In-place Recycling using foamed asphalt (CIR-foam) in consideration of its predicted field performance. The new laboratory mix design process was validated against various Reclaimed Asphalt Pavement (RAP) materials to determine its consistency over a wide range of RAP materials available throughout Iowa. The performance tests, which include dynamic modulus test, dynamic creep test and raveling test, were conducted to evaluate the consistency of a new CIR-foam mix design process to ensure reliable mixture performance over a wide range of traffic and climatic conditions. The “lab designed” CIR will allow the pavement designer to take the properties of the CIR into account when determining the overlay thickness.

Spinning welfare: The gains from process innovation in cotton and car production

Economists and economic historians want to know how much better life is today than in the past.Fifty years ago economic historians found surprisingly small gains from 19th century US railroads,while more recently economists have found relatively large gains from electricity, computers and cellphones. In each case the implicit or explicit assumption is that researchers were measuring the valueof a new good to society. In this paper we use the same techniques to find the value to society ofmaking existing goods cheaper. Henry Ford did not invent the car, and the inventors of mechanisedcotton spinning in the industrial revolution invented no new product. But both made existing productsdramatically cheaper, bringing them into the reach of many more consumers. That in turn haspotentially large welfare effects. We find that the consumer surplus of Henry Ford s production linewas around 2% by 1923, 15 years after Ford began to implement the moving assembly line, while themechanisation of cotton spinning was worth around 6% by 1820, 34 years after its initial invention.Both are large: of the same order of magnitude as consumer expenditure on these items, and as largeor larger than the value of the internet to consumers. On the social savings measure traditionally usedby economic historians, these process innovations were worth 15% and 18% respectively, makingthem more important than railroads. Our results remind us that process innovations can be at least asimportant for welfare and productivity as the invention of new products.

Introducing systematic dispatcher-assisted cardiopulmonary resuscitation (telephone-CPR) in a non-Advanced Medical Priority Dispatch System (AMPDS): implementation process and costs.

OBJECTIVE: In order to improve the quality of our Emergency Medical Services (EMS), to raise bystander cardiopulmonary resuscitation rates and thereby meet what is becoming a universal standard in terms of quality of emergency services, we decided to implement systematic dispatcher-assisted or telephone-CPR (T-CPR) in our medical dispatch center, a non-Advanced Medical Priority Dispatch System. The aim of this article is to describe the implementation process, costs and results following the introduction of this new "quality" procedure. METHODS: This was a prospective study. Over an 8-week period, our EMS dispatchers were given new procedures to provide T-CPR. We then collected data on all non-traumatic cardiac arrests within our state (Vaud, Switzerland) for the following 12months. For each event, the dispatchers had to record in writing the reason they either ruled out cardiac arrest (CA) or did not propose T-CPR in the event they did suspect CA. All emergency call recordings were reviewed by the medical director of the EMS. The analysis of the recordings and the dispatchers' written explanations were then compared. RESULTS: During the 12-month study period, a total of 497 patients (both adults and children) were identified as having a non-traumatic cardiac arrest. Out of this total, 203 cases were excluded and 294 cases were eligible for T-CPR. Out of these eligible cases, dispatchers proposed T-CPR on 202 occasions (or 69% of eligible cases). They also erroneously proposed T-CPR on 17 occasions when a CA was wrongly identified (false positive). This represents 7.8% of all T-CPR. No costs were incurred to implement our study protocol and procedures. CONCLUSIONS: This study demonstrates it is possible, using a brief campaign of sensitization but without any specific training, to implement systematic dispatcher-assisted cardiopulmonary resuscitation in a non-Advanced Medical Priority Dispatch System such as our EMS that had no prior experience with systematic T-CPR. The results in terms of T-CPR delivery rate and false positive are similar to those found in previous studies. We found our results satisfying the given short time frame of this study. Our results demonstrate that it is possible to improve the quality of emergency services at moderate or even no additional costs and this should be of interest to all EMS that do not presently benefit from using T-CPR procedures. EMS that currently do not offer T-CPR should consider implementing this technique as soon as possible, and we expect our experience may provide answers to those planning to incorporate T-CPR in their daily practice.

The role of institutions in the contractual process

Human beings increase their productivity by specializingtheir resources and exchanging their products. Theorganization of exchange is costly, however, becausespecialized activities need coordination and incentiveshave to be aligned. This work first describes how theseexchanges are organized in an institutional environment.It then focuses on the dual effect of this environment-as with any other specialized resource, institutions maybe used for expropriation purposes. They enjoyspecialization advantages in safeguarding exchange butthey also make possible new forms of opportunism,causing new costs of exchange. Three perverse tendenciesare identified:In the legal field, there is a surplus ofmandatory rules and, at the same time, a deficit in default rules. Second, courts activity is biased againstthe quasi-judicial role of the parties and the market. Third, Market enforcement is based on reputationalassets that are badly exposed to opportunism.

On the throughput-WIP trade-off in queueing systems, diminishing returns and the threshold property: A linear programming approach

We present a new unifying framework for investigating throughput-WIP(Work-in-Process) optimal control problems in queueing systems,based on reformulating them as linear programming (LP) problems withspecial structure: We show that if a throughput-WIP performance pairin a stochastic system satisfies the Threshold Property we introducein this paper, then we can reformulate the problem of optimizing alinear objective of throughput-WIP performance as a (semi-infinite)LP problem over a polygon with special structure (a thresholdpolygon). The strong structural properties of such polygones explainthe optimality of threshold policies for optimizing linearperformance objectives: their vertices correspond to the performancepairs of threshold policies. We analyze in this framework theversatile input-output queueing intensity control model introduced byChen and Yao (1990), obtaining a variety of new results, including (a)an exact reformulation of the control problem as an LP problem over athreshold polygon; (b) an analytical characterization of the Min WIPfunction (giving the minimum WIP level required to attain a targetthroughput level); (c) an LP Value Decomposition Theorem that relatesthe objective value under an arbitrary policy with that of a giventhreshold policy (thus revealing the LP interpretation of Chen andYao's optimality conditions); (d) diminishing returns and invarianceproperties of throughput-WIP performance, which underlie thresholdoptimality; (e) a unified treatment of the time-discounted andtime-average cases.

Insects associated with the composting process of solid urban waste separated at the source

Sarcosaprophagous macroinvertebrates (earthworms, termites and a number of Diptera larvae) enhance changes in the physical and chemical properties of organic matter during degradation and stabilization processes in composting, causing a decrease in the molecular weights of compounds. This activity makes these organisms excellent recyclers of organic matter. This article evaluates the succession of insects associated with the decomposition of solid urban waste separated at the source. The study was carried out in the city of Medellin, Colombia. A total of 11,732 individuals were determined, belonging to the classes Insecta and Arachnida. Species of three orders of Insecta were identified, Diptera, Coleoptera and Hymenoptera. Diptera corresponding to 98.5% of the total, was the most abundant and diverse group, with 16 families (Calliphoridae, Drosophilidae, Psychodidae, Fanniidae, Muscidae, Milichiidae, Ulidiidae, Scatopsidae, Sepsidae, Sphaeroceridae, Heleomyzidae, Stratiomyidae, Syrphidae, Phoridae, Tephritidae and Curtonotidae) followed by Coleoptera with five families (Carabidae, Staphylinidae, Ptiliidae, Hydrophilidae and Phalacaridae). Three stages were observed during the composting process, allowing species associated with each stage to be identified. Other species were also present throughout the whole process. In terms of number of species, Diptera was the most important group observed, particularly Ornidia obesa, considered a highly invasive species, and Hermetia illuscens, both reported as beneficial for decomposition of organic matter.

A process approach to the utility for gambling

This paper argues that any specific utility or disutility for gamblingmust be excluded from expected utility because such a theory is consequentialwhile a pleasure or displeasure for gambling is a matter of process, notof consequences. A (dis)utility for gambling is modeled as a process utilitywhich monotonically combines with expected utility restricted to consequences.This allows for a process (dis)utility for gambling to be revealed. Asan illustration, the model shows how empirical observations in the Allaisparadox can reveal a process disutility of gambling. A more general modelof rational behavior combining processes and consequences is then proposedand discussed.