Investigations on Ultrasonic Transducer Array Systems for NDE of Underwater Pipelines

The main objective of carrying out this investigation is to develop suitable transducer array systems so that underwater pipeline inspection could be carried out in a much better way, a focused beam and electronic steering can reduce inspection time as well. Better results are obtained by optimizing the array parameters. The spacing between the elements is assumed to be half the wavelength so that the interelement interaction is minimum. For NDT applications these arrays are operated at MHz range. The wavelengths become very small in these frequency ranges. Then the size of the array elements becomes very small, requiring hybrid construction techniques for their fabrication. Transducer elements have been fabricated using PVDF as the active, mild steel as the backing and conducting silver preparation as the bonding materials. The transducer is operated in the (3,3) mode. The construction of a high frequency array is comparatively complicated. The interelement spacing between the transducer elements becomes considerably small when high frequencies are considered. It becomes very difficult to construct the transducer manually. The electrode connections to the elements can produce significant loading effect. The array has to be fabricated using hybrid construction techniques. The active materials has to be deposited on a proper substrate and etching techniques are required to fabricate the array. The annular ring, annular cylindrical or other similar structural forms of arrays may also find applications in the near future in treatments were curved contours of the human body are affected.

Phase transitions in lithium ammonium sulfate below room temperature: An ultrasonic study

A detailed ultrasonic study of the elastic properties of lithium ammonium sulfate ~LiNH4SO4! or LAS has been carried out below room temperature. The elastic constants of LAS at room temperature are reported. The discrepancy present in earlier elastic constant data associated with the different choice of axes for this orthorhombic system are clarified. The results of the temperature variation study down to 220 K confirm the ferroelastic phase transition at 285 K and establish a thermal hysteresis of about 2.5 K between the cooling and heating cycles. Results of the investigation on the suspected weak phase transition at 256 K suggest that this transition occurs at 242 K on cooling and at 256 K on heating, thus having a thermal hysteresis of about 14 K. However, since the observed elastic anomaly for this transition is very small, the nature of this transition still remains unclear

Third order elastic constants of bcc Cu-Al-Ni

We have measured the changes in the ultrasonic wave velocity, induced by the application of uniaxial stresses in a Cu-Al-Ni single crystal. From these measurements, the complete set of third-order elastic constants has been obtained. The comparison of results for Cu-Al-Ni with available data for other Cu-based alloys has shown that all these alloys exhibit similar anharmonic behavior. By using the measured elastic constants in a Landau expansion for elastic phase transitions, we have been able to give an estimation of the value of a fourth-order elastic constants combination. The experiments have also shown that the application of a stress in the [001] direction, reduces the material resistance to a (110)[110] shear and thus favors the martensitic transition.

Tomographic imaging of molecular orbitals in length and velocity form

Recently Itatani et al. [Nature 432, 876 (2004)] introduced the new concept of molecular orbital tomography, where high harmonic generation (HHG) is used to image electronic wave functions. We describe an alternative reconstruction form, using momentum instead of dipole matrix elements for the electron recombination step in HHG. We show that using this velocity-form reconstruction, one obtains better results than using the original length-form reconstruction. We provide numerical evidence for our claim that one has to resort to extremely short pulses to perform the reconstruction for an orbital with arbitrary symmetry. The numerical evidence is based on the exact solution of the time-dependent Schrödinger equation for 2D model systems to simulate the experiment. Furthermore we show that in the case of cylindrically symmetric orbitals, such as the N2 orbital that was reconstructed in the original work, one can obtain the full 3D wave function and not only a 2D projection of it. Vor kurzem führten Itatani et al. [Nature 432, 876 (2004)] das Konzept der Molelkülorbital-Tomographie ein. Hierbei wird die Erzeugung hoher Harmonischer verwendet, um Bilder von elektronischen Wellenfunktionen zu gewinnen. Wir beschreiben eine alternative Form der Rekonstruktion, die auf Impuls- statt Dipol-Matrixelementen für den Rekombinationsschritt bei der Erzeugung der Harmonischen basiert. Wir zeigen, dass diese "Geschwindigkeitsform" der Rekonstruktion bessere Ergebnisse als die ursprüngliche "Längenform" liefert. Wir zeigen numerische Beweise für unsere Behauptung, dass man zu extrem kurzen Laserpulsen gehen muss, um Orbitale mit beliebiger Symmetrie zu rekonstruieren. Diese Ergebnisse basieren auf der exakten Lösung der zeitabhängigen Schrödingergleichung für 2D-Modellsysteme. Wir zeigen ferner, dass für zylindersymmetrische Orbitale wie das N2-Orbital, welches in der oben zitierten Arbeit rekonstruiert wurde, das volle 3D-Orbital rekonstruiert werden kann, nicht nur seine 2D-Projektion.

Piezoelectric Ultrasonic Micromotors

This report describes development of micro-fabricated piezoelectric ultrasonic motors and bulk-ceramic piezoelectric ultrasonic motors. Ultrasonic motors offer the advantage of low speed, high torque operation without the need for gears. They can be made compact and lightweight and provide a holding torque in the absence of applied power, due to the traveling wave frictional coupling mechanism between the rotor and the stator. This report covers modeling, simulation, fabrication and testing of ultrasonic motors. Design of experiments methods were also utilized to find optimal motor parameters. A suite of 8 mm diameter x 3 mm tall motors were machined for these studies and maximum stall torques as large as 10^(- 3) Nm, maximum no-load speeds of 1710 rpm and peak power outputs of 27 mW were realized. Aditionally, this report describes the implementation of a microfabricated ultrasonic motor using thin-film lead zirconate titanate. In a joint project with the Pennsylvania State University Materials Research Laboratory and MIT Lincoln Laboratory, 2 mm and 5 mm diameter stator structures were fabricated on 1 micron thick silicon nitride membranes. Small glass lenses placed down on top spun at 100-300 rpm with 4 V excitation at 90 kHz. The large power densities and stall torques of these piezoelectric ultrasonic motors offer tremendous promis for integrated machines: complete intelligent, electro-mechanical autonomous systems mass-produced in a single fabrication process.

Visual SLAM for underwater vehicles using video velocity log and natural landmarks

A visual SLAM system has been implemented and optimised for real-time deployment on an AUV equipped with calibrated stereo cameras. The system incorporates a novel approach to landmark description in which landmarks are local sub maps that consist of a cloud of 3D points and their associated SIFT/SURF descriptors. Landmarks are also sparsely distributed which simplifies and accelerates data association and map updates. In addition to landmark-based localisation the system utilises visual odometry to estimate the pose of the vehicle in 6 degrees of freedom by identifying temporal matches between consecutive local sub maps and computing the motion. Both the extended Kalman filter and unscented Kalman filter have been considered for filtering the observations. The output of the filter is also smoothed using the Rauch-Tung-Striebel (RTS) method to obtain a better alignment of the sequence of local sub maps and to deliver a large-scale 3D acquisition of the surveyed area. Synthetic experiments have been performed using a simulation environment in which ray tracing is used to generate synthetic images for the stereo system

Distribució espacial i ús de l'hàbitat de la comunitat de peixos a l'estany de Banyoles

En el marc d'un projecte més ampli sobre la comunitat de peixos de la conca lacustre de Banyoles, s'ha estudiat la distribució espacial de les diferents espècies així com l'ús que aquestes fan de l'hàbitat. El poblament piscícola de l'estany de Banyoles és el resultat d'un llarg historial d'introducció d'espècies exòtiques i extinció de les poblacions autòctones locals. S'ha revisat la seva composició actual detectant un total de 18 espècies (4 autòctones i 14 introduïdes) de les quals només 13 presenten una població estable. L'estudi de l'hàbitat s'ha centrat a l'Estany, l'element principal del sistema lacustre, analitzant per separat la zona litoral i la zona limnètica. En el primer cas s'han realitzat les captures d'individus mitjançant pesca elèctrica des d'una embarcació adaptada per aquesta pràctica. La totalitat del litoral ha estat dividida en trams de característiques homogènies on s'han obtingut les captures per unitat d'esforç per cada espècie. El mostreig s'ha desenvolupat entre l'estiu de 1997 i la primavera del 2000 realitzant un total de 10 campanyes de pesca. Les espècies més abundants al litoral són la perca americana (Micropterus salmoides) i el peix sol (Lepomis gibbosus), essent també presents la perca (Perca fluviatilis), carpa (Cyprinus carpio) i el gardí (Scardinius erythrophthalmus). S'han capturat altres espècies com ara anguila (Anguilla anguilla), bagra (Squalius cephalus), sandra (Sander lucioperca), carpí (Carassius auratus) i madrilleta vera (Rutilus rutilus), però són molt menys abundants en nombre. S'ha examinat, per cadascuna de les espècies, si existeix selecció de l'hàbitat i en cas afirmatiu, quin és el preferent en base a la classificació del litoral en sis tipus de vegetació predominant. Les espècies més abundants, perca americana i peix sol, ocupen tots els hàbitats disponibles però amb una densitat diferent. La perca mostra també una clara selecció de l'hàbitat a favor de les zones molt estructurades amb abundant presència de jonca litoral. Carpa i gardí seleccionen els ambients més fondos amb major presència de matèria orgànica d'origen vegetal procedent del bogar. En general els individus ocupen les zones amb una densitat de vegetació intermèdia, majoritàriament zones de jonca a l'estiu i zones amb mansega a l'hivern, on troben refugi i els recursos tròfics necessaris. La perca americana, a més, presenta una elevada fidelitat a un mateix punt del litoral al llarg de la seva vida. La zona limnètica ha estat prospectada mensualment mitjançant ecosondació, realitzant transectes perpendiculars a l'eix principal de l'Estany, cobrint la seva totalitat. La composició d'espècies s'ha obtingut a partir de les captures fetes amb xarxes (tresmalls) amb periodicitat estacional. L'anàlisi geoestadística de la densitat de peixos ha permès descriure l'estructura espacial d'aquesta a partir dels variogrames, així com la seva variabilitat tant espacial com temporal, i obtenir els mapes de densitat. A l'hivern, la densitat de peixos a la zona limnètica assoleix els seus valors mínims i els individus es troben formant agregats dispersos, pels diferents estrats de fondària. A partir de la primavera la densitat augmenta, pel reclutament i la major freqüència d'individus que abandonen el litoral; la densitat esdevé més homogènia a les primer capes de fondària. A l'estiu la densitat és màxima i l'estrat més homogeni coincideix amb la posició de la termoclina. Aquest estructura varia en disminuir la temperatura i barrejar-se la columna d'aigua, tornant a la situació hivernal. La perca i la madrilleta vera són les espècies predominants en aquest ambient, juntament amb la carpa. La seva distribució no és homogènia i respon a les característiques limnològiques de les diferents cubetes de l'Estany. Una particularitat d'aquest, relacionada amb el seu origen càrstic, es la formació d'una ploma hidrotermal que afecta la distribució dels peixos, probablement en augmentar la terbolesa. S'ha integrat l'ús de l'hàbitat de les espècies que ocupen tant la zona limnètica com la litoral a partir del seguiment d'individus, concretament de perca i bagra. S'ha utilitzat un sistema automàtic de posicionament que estima la localització dels individus marcats amb transmissor de telemetria acústica. L'anàlisi dels desplaçaments mostra un rang superior per la bagra en comparació amb la perca. Ambdues espècies mostren una orientació en els seus desplaçaments. La perca ocupa el litoral a la nit i es desplaça a la zona limnètica de dia, amb un ritme d'activitat marcat per dos màxims coincidint amb la sortida i posta de sol; en canvi la bagra mostra una major activitat nocturna amb zones de repòs properes al litoral. S'ha estimat igualment els dominis vital de cada individu marcat.

Are there hazardous auditory effects of high-frequency turbines and ultrasonic dental scalers on dental professionals?

The purpose of this pilot study was to survey dentists in the St. Louis area to assess their subjective opinion of commonly used dental handpieces as well as history of noise exposure and use of hearing protection. Selected handpieces were then chosen to measure their output levels and determine if emissions are hazardous to the auditory system.

Velocity discrimination of angular motion at different frequencies in individuals with normal vestibular function

The purpose of this study was to evaluate discrimination of angular velocity in individuals with normal vestibular function using a newly developed adaptive psychophysical measure. Vestibular psychophysical testing may complement existing clinical measures in diagnosing and treating patients with imbalance.

Velocities of compressional and shear waves in limestones

Carbonate rocks are important hydrocarbon reservoir rocks with complex textures and petrophysical properties (porosity and permeability) mainly resulting from various diagenetic processes (compaction, dissolution, precipitation, cementation, etc.). These complexities make prediction of reservoir characteristics (e.g. porosity and permeability) from their seismic properties very difficult. To explore the relationship between the seismic, petrophysical and geological properties, ultrasonic compressional- and shear-wave velocity measurements were made under a simulated in situ condition of pressure (50 MPa hydrostatic effective pressure) at frequencies of approximately 0.85 MHz and 0.7 MHz, respectively, using a pulse-echo method. The measurements were made both in vacuum-dry and fully saturated conditions in oolitic limestones of the Great Oolite Formation of southern England. Some of the rocks were fully saturated with oil. The acoustic measurements were supplemented by porosity and permeability measurements, petrological and pore geometry studies of resin-impregnated polished thin sections, X-ray diffraction analyses and scanning electron microscope studies to investigate submicroscopic textures and micropores. It is shown that the compressional- and shear-wave velocities (V-p and V-s, respectively) decrease with increasing porosity and that V-p decreases approximately twice as fast as V-s. The systematic differences in pore structures (e.g. the aspect ratio) of the limestones produce large residuals in the velocity versus porosity relationship. It is demonstrated that the velocity versus porosity relationship can be improved by removing the pore-structure-dependent variations from the residuals. The introduction of water into the pore space decreases the shear moduli of the rocks by about 2 GPa, suggesting that there exists a fluid/matrix interaction at grain contacts, which reduces the rigidity. The predicted Biot-Gassmann velocity values are greater than the measured velocity values due to the rock-fluid interaction. This is not accounted for in the Biot-Gassmann velocity models and velocity dispersion due to a local flow mechanism. The velocities predicted by the Raymer and time-average relationships overestimated the measured velocities even more than the Biot model.