Preparation of reticulated MAX-phase support with morphology-controllable nanostructured ceria coating for gas exhaust catalyst devices

Reticulated porous Ti3AlC2 ceramic, a member of the MAX-phase family (Mn+1AXn phases, where M is an early transition metal, A is an A-group element, and X is carbon and/or nitrogen), was prepared from the highly dispersed aqueous suspension by a replica template method. Through a cathodic electrogeneration method, nanocrystalline catalytic CeO2 coatings were deposited on the conductive porous Ti 3AlC2 supports. By adjusting the pH value and cathodic deposition current, coatings exhibiting nanocellar, nanosheets-like, or bubble-free morphologies can be obtained. This work expects to introduce a novel practically feasible material system and a catalytic coating preparation technique for gas exhaust catalyst devices.

Additively manufactured device for dynamic culture of large arrays of 3D tissue engineered constructs

The ability to test large arrays of cell and biomaterial combinations in 3D environments is still rather limited in the context of tissue engineering and regenerative medicine. This limitation can be generally addressed by employing highly automated and reproducible methodologies. This study reports on the development of a highly versatile and upscalable method based on additive manufacturing for the fabrication of arrays of scaffolds, which are enclosed into individualized perfusion chambers. Devices containing eight scaffolds and their corresponding bioreactor chambers are simultaneously fabricated utilizing a dual extrusion additive manufacturing system. To demonstrate the versatility of the concept, the scaffolds, while enclosed into the device, are subsequently surface-coated with a biomimetic calcium phosphate layer by perfusion with simulated body fluid solution. 96 scaffolds are simultaneously seeded and cultured with human osteoblasts under highly controlled bidirectional perfusion dynamic conditions over 4 weeks. Both coated and noncoated resulting scaffolds show homogeneous cell distribution and high cell viability throughout the 4 weeks culture period and CaP-coated scaffolds result in a significantly increased cell number. The methodology developed in this work exemplifies the applicability of additive manufacturing as a tool for further automation of studies in the field of tissue engineering and regenerative medicine.

Maallikon suorittama defibrillaatio sydänpysähdyspotilaan hoitoketjussa

Sudden cardiac arrest (CA) is one of the leading causes of death in Europe. It has been estimated that about 40 % of CA victims have ventricular fibrillation (VF) at the time of the first heart rhythm analysis. The treatment for VF is immediate cardiopulmonary resuscitation (CPR) and rapid defibrillation. The automated external defibrillator (AED) and the concept of public access defibrillation (PAD) may be a key to shortening defibrillation delays. Recent studies have shown that PAD programs are associated with high survival rates from VF when devices have been placed in certain risk sites and used by trained laypersons. Today many public places are equipped with AEDs. The purpose of this study was to find new ways of utilizing layperson defibrillation and promote the concept of public access defibrillation (PAD). The study explored the use of AEDs by non-medical first responders in Finland and cabin crew on board a commercial aircraft. A simulated study was performed to explore the role of dispatcher assistance in layperson CPR and defibrillation. A 15-year follow-up study of 59 one-year survivors after successful out-of-hospital resuscitation was performed to evaluate the long-term quality of life of the CA patients. Although there are many AEDs in use by non-medical first responders in Finland, the results of the study showed that there are large variations between individual first response units. This is considered to be caused by the lack of national standards and regulations that would define a full integration of first-responder programmes into the Emergency Medical Services system. The goal of rapid defibrillation in five minutes after the onset of CA is difficult to achieve in Finland due to sparse population and long distances. Local PAD programs may shorten the defibrillation delays. Dispatcher assistance in defibrillation by a layperson not trained to use an AED seems feasible and does not compromise the performance of CPR. In a simulated study, the quality of mouth-to-mouth ventilation performed by laypersons was found to be better after CPR training compared with performance with dispatcher assistance before training. Training was not found to have an influence on the quality of compressions or defibrillation compared with dispatcher assistance of untrained laypersons. The target groups for CPR and defibrillation training need further evaluation. The placements of the AEDs in public areas should be known by the emergency response center and the location should be marked with an international sign. The finding that once a good neurological outcome after CA is achieved, it can be maintained for more than 10 years, encourages further efforts to improve the survival of CA patients.

Worldwide outdoor round robin study of organic photovoltaic devices and modules

Accurate characterization and reporting of organic photovoltaic (OPV) device performance remains one of the important challenges in the field. The large spread among the efficiencies of devices with the same structure reported by different groups is significantly caused by different procedures and equipment used during testing. The presented article addresses this issue by offering a new method of device testing using “suitcase sample” approach combined with outdoor testing that limits the diversity of the equipment, and a strict measurement protocol. A round robin outdoor characterization of roll-to-roll coated OPV cells and modules conducted among 46 laboratories worldwide is presented, where the samples and the testing equipment were integrated in a compact suitcase that served both as a sample transportation tool and as a holder and test equipment during testing. In addition, an internet based coordination was used via plasticphotovoltaics.org that allowed fast and efficient communication among participants and provided a controlled reporting format for the results that eased the analysis of the data. The reported deviations among the laboratories were limited to 5% when compared to the Si reference device integrated in the suitcase and were up to 8% when calculated using the local irradiance data. Therefore, this method offers a fast, cheap and efficient tool for sample sharing and testing that allows conducting outdoor measurements of OPV devices in a reproducible manner.

Dynamics and control of buckling type devices using SMA wire integrated beam

An analysis and design study using Shape Memory Alloy (SMA) wire integrated beam and its buckling shape control are reported. The dynamical system performance is analyzed with a mathematical set-up involving nonlocal and rate sensitive kinetics of phase transformation in the SMA wire. A standard phenomenological constitutive model reported by Brinson (1993) is modified by considering certain consistency conditions in the material property tensors and by eliminating spurious singularity. Considering the inhomogeneity effects, a finite element model of the SMA wire is developed. Simulations are carried out to study the buckling shape control of a beam integrated with SMA wire.

Cluster based training for scaling non-linear support vector machines

Support Vector Machines(SVMs) are hyperplane classifiers defined in a kernel induced feature space. The data size dependent training time complexity of SVMs usually prohibits its use in applications involving more than a few thousands of data points. In this paper we propose a novel kernel based incremental data clustering approach and its use for scaling Non-linear Support Vector Machines to handle large data sets. The clustering method introduced can find cluster abstractions of the training data in a kernel induced feature space. These cluster abstractions are then used for selective sampling based training of Support Vector Machines to reduce the training time without compromising the generalization performance. Experiments done with real world datasets show that this approach gives good generalization performance at reasonable computational expense.

The pulling power of chocolate: Effects of approach-avoidance training on approach bias and consumption

Previous research has shown that action tendencies to approach alcohol may be modified using computerized ApproacheAvoidance Task (AAT), and that this impacted on subsequent consumption. A recent paper in this journal (Becker, Jostman, Wiers, & Holland, 2015) failed to show significant training effects for food in three studies: Nor did it find effects on subsequent consumption. However, avoidance training to high calorie foods was tested against a control rather than Approach training. The present study used a more comparable paradigm to the alcohol studies. It randomly assigned 90 participants to ‘approach’ or ‘avoid’ chocolate images on the AAT, and then asked them to taste and rate chocolates. A significant interaction of condition and time showed that training to avoid chocolate resulted in faster avoidance responses to chocolate images, compared with training to approach it. Consistent with Becker et al.'s Study 3, no effect was found on amounts of chocolate consumed, although a newly published study in this journal (Schumacher, Kemps, & Tiggemann, 2016) did do so. The collective evidence does not as yet provide solid basis for the application of AAT training to reduction of problematic food consumption, although clinical trials have yet to be conducted.

Digital competence and professional development of vocational education and training teachers in Queensland

Teaching with digital technologies is essential to the development of 21st century students’ graduate capabilities. However, relatively little is known about the extent to which Queensland VET teachers engage with digitally-enhanced teaching, or have the capacity to do so. Using a mixed methods approach, this thesis investigated the current digital teaching capacities of VET teachers and how current professional development opportunities are helping to address their learning needs.

In-training assessment - Its potential in enhancing clinical teaching

Context In-training assessment (ITA) has established its place alongside formative and summative assessment at both the undergraduate and postgraduate level. In this paper the authors aimed to identify those characteristics of ITA that could enhance clinical teaching. Methods A literature review and discussions by an expert working group at the Ninth Cambridge Conference identified the aspects of ITA that could enhance clinical teaching. Results The features of ITA identified included defining the specific benefits to the learner, teacher and institution, and highlighting the patient as the context for ITA and clinical teaching. The ‘mapping’ of a learner’s progress towards the clinical teaching objectives by using multiple assessments over time, by multiple observers in both a systematic and opportunistic way correlates with the incremental nature of reaching clinical competence. Conclusions The importance of ITA based on both direct and indirect evidence of what the learner actually does in the real clinical setting is emphasized. Particular attention is given to addressing concerns in the more controversial areas of assessor training, ratings and documentation for ITA. Areas for future research are also identified.

Stability Training and Measurement System for Sportsperson (P84)

Balance and stability are very important for everybody and especially for sports-person who undergo extreme physical activities. Balance and stability exercises not only have a great impact on the performance of the sportsperson but also play a pivotal role in their rehabilitation. Therefore, it is very essential to have knowledge about a sportsperson’s balance and also to quantify the same. In this work, we propose a system consisting of a wobble board, with a gyro enhanced orientation sensor and a motion display for visual feedback to help the sportsperson improve their stability. The display unit gives in real time the orientation of the wobble board, which can help the sportsperson to apply necessary corrective forces to maintain neutral position. The system is compact and portable. We also quantify balance and stability using power spectral density. The sportsperson is made stand on the wobble board and the angular orientation of the wobble board is recorded for each 0.1 second interval. The signal is analized using discrete Fourier transforms. The power of this signal is related to the stability of the subject. This procedure is used to measure the balance and stability of an elite cricket team. Representative results are shown below: Table 1 represents power comparison of two subjects and Table 2 represents power comparison of left leg and right leg of one subject. This procedure can also be used in clinical practice to monitor improvement in stability dysfunction of sportsperson with injuries or other related problems undergoing rehabilitation.