Resiliencia y variables sociodemograficas

En el presente trabajo se aborda la definición de una de las variables dentro de lo que se denomina Capital psicológico positivo, la Resiliencia, sus principales características y algunas de las variables socio demográficas que en el estudio pretenden ver el nivel de relación existente entre cada una de ellas (indirecta o directamente) en el proceso resiliente de una persona para posteriores discusiones y su implicación dentro de la gestión empresarial y sus direcciones futuras.

Gestión de la cadena de suministros desde la dinámica de sistemas. Aproximación al mejoramiento de la toma de decisiones

El objetivo de este trabajo es hacer un estudio sobre la cadena de suministros en organizaciones empresariales desde la Dinámica de Sistemas y como esta puede aportar al desempeño y el control de las cadenas de suministros. Se buscará Abordar el cocimiento sobre tres perspectivas de Supply Chain y su relación con la dinámica de sistemas. También se buscará identificar los tipos de integración en las actividades de la gestión en la cadena de suministros y sus horizontes de planeación. Por último, se pretende analizar las aplicaciones de Supply Chain Management que se han basado en el uso de la metodología de dinámica de sistemas. Para esto, la investigación empezará por definir la problemática alrededor de unir estas dos áreas y definirá el marco teórico que fundan estas dos disciplinas. Luego se abordará la metodología usada por la Dinámica de Sistemas y los diferentes aspectos de la cadena de suministros. Se Ahondará en el acercamiento de las dos disciplinas y como convergen ayudando la SD a la SCM (Supply Chain Management). En este punto también se describirán los trabajos en los diferentes enfoques que se han hecho a partir de uso de la dinámica de sistemas. Por último, presentaremos las correspondientes conclusiones y comentarios acerca de este campo de investigación y su pertinencia en el campo de la Supply Chain. Esta investigación abarca dos grandes corrientes de pensamiento, una sistémica, a través de la metodología de dinámica de sistemas y la otra, lógico analítica la cual es usada en Supply Chain. Se realizó una revisión de la literatura sobre las aplicaciones de dinámica de sistemas (SD) en el área de Supply Chain, sus puntos en común y se documentaron importantes empleos de esta metodología que se han hecho en la gestión de la cadena de suministros.

Developing a system for assessing the costs associated with different procurement routes in the construction industry

In developing techniques for monitoring the costs associated with different procurement routes, the central task is disentangling the various project costs incurred by organizations taking part in construction projects. While all firms are familiar with the need to analyse their own costs, it is unusual to apply the same kind of analysis to projects. The purpose of this research is to examine the claims that new ways of working such as strategic alliancing and partnering bring positive business benefits. This requires that costs associated with marketing, estimating, pricing, negotiation of terms, monitoring of performance and enforcement of contract are collected for a cross-section of projects under differing arrangements, and from those in the supply chain from clients to consultants, contractors, sub-contractors and suppliers. Collaboration with industrial partners forms the basis for developing a research instrument, based on time sheets, which will be relevant for all those taking part in the work. The signs are that costs associated with tendering are highly variable, 1-15%, depending upon what precisely is taken into account. The research to date reveals that there are mechanisms for measuring the costs of transactions and these will generate useful data for subsequent analysis.

Re-engineering construction: going against the grain

An overtly critical perspective on 're-engineering construction' is presented. It is contended that re-engineering is impossible to define in terms of its substantive content and is best understood as a rhetorical label. In recent years, the language of re-engineering has heavily shaped the construction research agenda. The declared goals are to lower costs and improve value for the customer. The discourse is persuasive because it reflects the ideology of the 'enterprise culture' and the associated rhetoric of customer responsiveness. Re-engineering is especially attractive to the construction industry because it reflects and reinforces the existing dominant way of thinking. The overriding tendency is to reduce organizational complexities to a mechanistic quest for efficiency. Labour is treated as a commodity. Within this context, the objectives of re-engineering become 'common sense'. Knowledge becomes subordinate to the dominant ideology of neo-liberalism. The accepted research agenda for re-engineering construction exacerbates the industry's problems and directly contributes to the casualization of the workforce. The continued adherence to machine metaphors by the construction industry's top management has directly contributed to the 'bad attitudes' and 'adversarial culture' that they repeatedly decry. Supposedly neutral topics such as pre-assembly, partnering, supply chain management and lean thinking serve only to justify the shift towards bogus labour-only subcontracting and the associated reduction of employment rights. The continued casualization of the workforce raises real questions about the industry's future capacity to deliver high-quality construction. In order to appear 'relevant' to the needs of industry, it seems that the research community is doomed to perpetuate this regressive cycle.

Developing a system for assessing the costs associated with different procurement routes in the construction industry

In developing techniques for monitoring the costs associated with different procurement routes, the central task is disentangling the various project costs incurred by organizations taking part in construction projects. While all firms are familiar with the need to analyse their own costs, it is unusual to apply the same kind of analysis to projects. The purpose of this research is to examine the claims that new, ways of working such as strategic alliancing and partnering bring positive business benefits. This requires that costs associated with marketing, estimating, pricing, negotiation of terms, monitoring of performance and enforcement of contract are collected for a cross-section of projects under differing arrangements, and from those in the supply, chain from clients to consultants, contractors, subcontractors and suppliers. Collaboration with industrial partners forms the basis for developing a research instrument, bused on time sheets, which will be relevant for all those taking part in the work. The signs are that costs associated with,with tendering are highly variable, 1-15%, depending upon what precisely, is taken into account. The research to date reveals that there are mechanisms for measuring the costs of transactions and these will generate useful data for subsequent analysis.

Learning across business sectors: context, embeddedness and conceptual chasms

While the construction industry is frequently encouraged to learn from other business sectors, the difficulties of transferring knowledge from one context to another are rarely acknowledged. The problematic nature of knowledge is addressed with particular emphasis on the concept of contextual embeddedness. From this point of view, the process of 'knowledge transfer' depends upon a prolonged process of socialization between actors from both the 'receiving' and 'sending' contexts networking. It is contended that a significant conceptual chasm exists between the exhortations of industry leaders to learn from other sectors and the theoretical complexities associated with knowledge transfer. An ongoing research project is described that seeks to facilitate knowledge sharing between construction and aerospace. A novel approach to knowledge sharing based upon soft systems methodology (SSM) (Mode 2) is described and justified. Initial findings from the first cycle of the research are discussed and used to highlight the importance of context in the implementation of supply chain management.

Evaluating the likelihood of the adoption of an animal welfare assessment system in European agri-food supply chains

Purpose – The purpose of this paper is to analyse the likelihood of adoption of a recently designed Welfare Assessment System in agri-food supply chains and the factors affecting the adoption decision. The application is carried out for pig and poultry chains. Design/methodology/approach – This research consisted of two main components: interviews with retailers in pig and poultry supply chains in eight different EU countries to explore their perceptions towards the adoption possibilities of the welfare assessment system; and a conjoint analysis designed to evaluate the perceived adoption likelihood of the assessment system by different Standards Formulating Organisations (SFOs). Findings – Stakeholders were found to be especially concerned about the costs of implementation of the system and how it could, or should, be merged with existing assurance schemes. Another conclusion of the study is that the presence of a strong third independent party supporting the implementation of the welfare assessment system would be the most important influence on the decision whether, or not, to adopt it. Originality/value – This research evaluates the adoption possibilities of a novel Welfare Assessment System and presents the views of different supply chain stakeholders on an adoption of such a system. The main factors affecting the adoption decision are identified and analysed. Contrary to expectations, the costs of adoption of a new welfare assessment system were not considered to be the most important factor affecting the decision of supply chain stakeholders about the adoption of this new welfare system.

Placentation and maternal investment in mammals

The mammalian placenta exhibits striking interspecific morphological variation, yet the implications of such diversity for reproductive strategies and fetal development remain obscure. More invasive hemochorial placentas, in which fetal tissues directly contact the maternal blood supply, are believed to facilitate nutrient transfer, resulting in higher fetal growth rates, and to be a state of relative fetal advantage in the evolution of maternal-offspring conflict. The extent of interdigitation between maternal and fetal tissues has received less attention than invasiveness but is also potentially important because it influences the surface area for exchange. We show that although increased placental invasiveness and interdigitation are both associated with shorter gestations, interdigitation is the key variable. Gestation times associated with highly interdigitated labyrinthine placentas are 44% of those associated with less interdigitated villous and trabecular placentas. There is, however, no relationship between placental traits and neonatal body and brain size. Hence, species with more interdigitated placentas produce neonates of similar body and brain size but in less than half the time. We suggest that the effects of placental interdigitation on growth rates and the way that these are traded off against gestation length may be promising avenues for understanding the evolutionary dynamics of parentoffspring conflict. Keywords: placenta, parent-offspring conflict, life history, brain evolution, reproductive strategies, gestation.

The economic theory of international supply chains: a systems view

This paper offers an integrated analysis of out-sourcing, off-shoring and foreign direct investment within a systems view of international business. This view takes the supply chain rather than the firm as the basic unit of analysis. It argues that competition in the global economy selects supply chains that maximise the joint profit of all the firms in the chain. The systems view is compared with the firm-centred view commonly used in strategy literature. The paper shows that a firm’s strategy must be embedded within an efficient supply chain strategy, and that this strategy must be negotiated with, rather than imposed upon, other firms. The paper analyses the conditions under which various supply chain strategies - and by implication various firm-level strategies - are efficient. Only by adopting a systems view of supply chains is it possible to determine which firm-level strategies will succeed in a volatile global economy.

Economic analysis of international supply chains: an internalization perspective

Offshoring and outsourcing in global value chains have been extensively analyzed from a strategic management perspective (Gereffi & Li, 2012; Gereffi, Humphrey & Sturgeon, 2005; Mudambi & Venzin, 2010). This paper examines these issues from an internalization theory perspective by summarizing the contribution of internalization theory to supply chain analysis; considering how a division of labor is coordinated and comparing coordination by management with coordination by the market; and discussing the formal models of supply chains developed by economists. Supply chain researchers possessing an interest in economic principles and good mathematical skills can make an important contribution to internalization theory, and it is hoped that this paper will encourage them to do so.

Segmenting the Italian coffee market: marketing opportunities for economic agents working along the international coffee chain

Globalization, either directly or indirectly (e.g. through structural adjustment reforms), has called for profound changes in the previously existing institutional order. Some changes adversely impacted the production and market environment of many coffee producers in developing countries resulting in more risky and less remunerative coffee transactions. This paper focuses on customization of a tropical commodity, fair-trade coffee, as an approach to mitigating the effects of worsened market conditions for small-scale coffee producers in less developed countries. fair-trade labeling is viewed as a form of “de-commodification” of coffee through product differentiation on ethical grounds. This is significant not only as a solution to the market failure caused by pervasive information asymmetries along the supply chain, but also as a means of revitalizing the agricultural-commodity-based trade of less developed countries (LDCs) that has been languishing under globalization. More specifically, fair-trade is an example of how the same strategy adopted by developed countries’ producers/ processors (i.e. the sequence product differentiation - institutional certification - advertisement) can be used by LDC producers to increase the reputation content of their outputs by transforming them from mere commodities into “decommodified” (i.e. customized and more reputed) goods. The resulting segmentation of the world coffee market makes possible to meet the demand by consumers with preference for this “(ethically) customized” coffee and to transfer a share of the accruing economic rents backward to the Fair-trade coffee producers in LDCs. It should however be stressed that this outcome cannot be taken for granted since investments are needed to promote the required institutional innovations. In Italy FTC is a niche market with very few private brands selling this product. However, an increase of FTC market share could be a big commercial opportunity for farmers in LDCs and other economic agents involved along the international coffee chain. Hence, this research explores consumers’ knowledge of labels promoting quality products, consumption coffee habits, brand loyalty, willingness to pay and market segmentation according to the heterogeneity of preferences for coffee products. The latter was assessed developing a D-efficient design where stimuli refinement was tested during two focus groups.

Towards conceptualizing reverse service supply chains

Purpose – Recognizing the heterogeneity of services, this paper aims to clarify the characteristics of forward and the corresponding reverse supply chains of different services. Design/methodology/approach – The paper develops a two-dimensional typology matrix, representing four main clusters of services according to the degree of input standardization and the degree of output tangibility. Based on this matrix, this paper develops a typology and parsimonious conceptual models illustrating the characteristics of forward and the corresponding reverse supply chains of each cluster of services. Findings – The four main clusters of service supply chains have different characteristics. This provides the basis for the identification, presentation and explanation of the different characteristics of their corresponding reverse service supply chains. Research limitations/implications – The findings of this research can help future researchers to analyse, map and model forward and reverse service supply chains, and to identify potential research gaps in the area. Practical/implications – The findings of the research can help managers of service firms to gain better visibility of their forward and reverse supply chains, and refine their business models to help extend their reverse/closed-loop activities. Furthermore, the findings can help managers to better optimize their service operations to reduce service gaps and potentially secure new value-adding opportunities. Originality/value – This paper is the first, to the authors ' knowledge, to conceptualize the basic structure of the forward and reverse service supply chains while dealing with the high level of heterogeneity of services.

The role of convective parameterization in the simulation of a cyclone over the South Atlantic

Numerical simulations are carried out to examine the role of the Kuo and Kain-Fritsch (KF) cumulus parameterization schemes and dry dynamics on a cyclone development, in a weak baroclinic atmosphere, over subtropical South Atlantic Ocean. The initial phase of the cyclone development is investigated with a coarse horizontal mesh (75 km) and when the cyclone reaches the mature stage two different horizontal resolutions are used (75 and 25 km). The best performance simulation for the cyclone initial phase occurs when the Kuo convective scheme is applied, and this may be attributed to a greater diabatic warming in the troposphere. On the other hand, the dry simulation is not capable of simulating the correct location and intensity of the cyclone in its initial phase. During the mature phase, a cyclone over deepening occurs in the Kuo scheme experiment associated with larger latent heat release in a deep vertical column. The presence of downdraft currents in the KF scheme, which acts to cool and dry the lower levels, is essential to stabilize the atmosphere and to reproduce the nearest observation cyclone deepening rate. The largest cyclone deepening is found in the Kuo scheme high resolution experiment. This suggests that the KF convective scheme is less sensitive to the horizontal grid resolution. It was also revealed that the diabatic processes are crucial to simulate the observed features of this marine cyclone over subtropical region.

Materials Education and Research in Art and Design: A New Role for Libraries - Session 2. Educators

Educators representing interactions with materials speak to critical approaches, life-cycle concerns, critical thinking of composition/process/properties.