Phonon confinement model to measure the average sizes of anatase nanoparticles synthesized by a solvothermal method using H2O2

In this work, crystalline titanium dioxide (TiO2) nanoparticles with variable average crystallite sizes (e.g., 8 nm) and surface areas (e.g., 192 m² g-1) were synthesized in pure anatase phase using H2O2 to reduce the hydrolysis rate of the titanium ions. An isopropanol (IP) solution was employed as the reaction medium. The TiO2 nanoparticles were characterized by powder X-ray diffraction analysis (XRD), Raman spectroscopy and transmission electron microscopy (TEM). By changing the synthesis parameters it was possible to control nanoparticle size and avoid the coalescence process. A dependence of the Raman wavenumber on the nanocrystal sizes was determined, which is quite useful for a quick check of the size of TiO2 nanocrystals.

Análise de materiais para sistemas de fechamento ósseo através da caracterização superficial e comportamento mecânico

Pós-graduação em Engenharia Mecânica - FEB

Caracterização mecânica e microestrutural de juntas soldadas a laser em aços maraging com posterior tratamento térmico e termoquímico de superfície a plasma

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação microbiológica da superfície muscular de carcaças ovinas durante as operações de abate em matadouro

In order to evaluate the hygienic-sanitary conditions of lamb carcasses for human consumption, this study aimed at quantifying populations of indicator microorganisms, such as: mesophiles and psychrotrophs, molds and yeasts, Escherichia coli, Staphylococcus spp. and at identifying pathogenic microorganisms (Salmonella sp. and Listeria spp.). The study was conducted in one lamb slaughterhouse located in the State of São Paulo. Swab samples were collected from muscle surface of forequarter and hindquarter regions of 30 half-carcasses after skinning, evisceration and washing processes. Population counts were between the following values in log10: 2,00 ± 0,32 and 2,59 ± 0,76 UFC/cm2 for mesophiles; 1,52 ± 0,98 and 2,35 ± 1,17 UFC/cm2 for psychrotrophs; 0,75 ± 0,87 and 1,23 ± 0,97 UFC/cm2 for molds and yeasts; 0,00 ± 0,00 and 0,31 ± 0,84 NMP/cm2 for Escherichia coli and 1,75 ± 0,71 and 1,95 ± 0,68 UFC/cm2 for Staphylococcus spp. Salmonella sp. and Listeria spp. were not detected from any of the sampled points. These results indicate the necessity to improve the hygienic-sanitary conditions.

O efeito do consumo abusivo de alvool no torque de remoção de implantes de titânio

Studies have reported that alcohol may lead to imbalance in bone formation and resorption, however, its effects on osseointegration of titanium implants continues to be an inconclusive subject. In this context, the aim of this study was to make a biomechanical evaluation of the effect of abusive alcohol consumption on the removal torque of osseointegrated titanium implants. Male Wistar rats (n=30) were divided into two experimental groups (15 each) receiving only water (Control) or 36% alcohol solution oral administration. Thirty days later, all animals were submitted to titanium implant (2.2 mm x 4 mm) placement in the right and left tibiae. The surgical alveoli were prepared with a 2 mm drill mounted in a counter-angle hand-piece (20:1 ratio, 35 Ncm torque at 1200 rpm) under abundant cooling. Five animals from each group were euthanized at 15, 30, and 60 days. Tibiae were submitted to reverse torque analysis. Data obtained were submitted to statistical analysis by the non-parametric Kruskal-Wallis and Dunn Tests (p < 0.05). Animals in the alcohol group presented lower removal torque values when compared with control group animals for all periods tested (p < 0.05). It can be concluded that abusive alcohol consumption can reduce the removal torque of titanium implants placed in rat tibiae, suggesting that alcohol may interfere in the osseointegration process of titanium implants.

O efeito do consumo abusivo de álcool no torque de remoção de implante de titânio

Studies have reported that alcohol may lead to imbalance in bone formation and resorption, however, its effects on osseointegration of titanium implants continues to be an inconclusive subject. In this context, the aim of this study was to make a biomechanical evaluation of the effect of abusive alcohol consumption on the removal torque of osseointegrated titanium implants. Male Wistar rats (n=30) were divided into two experimental groups (15 each) receiving only water (Control) or 36% alcohol solution oral administration. Thirty days later, all animals were submitted to titanium implant (2.2 mm x 4 mm) placement in the right and left tibiae. The surgical alveoli were prepared with a 2 mm drill mounted in a counter-angle hand-piece (20:1 ratio, 35 Ncm torque at 1200 rpm) under abundant cooling. Five animals from each group were euthanized at 15, 30, and 60 days. Tibiae were submitted to reverse torque analysis. Data obtained were submitted to statistical analysis by the non-parametric Kruskal-Wallis and Dunn Tests (p < 0.05). Animals in the alcohol group presented lower removal torque values when compared with control group animals for all periods tested (p < 0.05). It can be concluded that abusive alcohol consumption can reduce the removal torque of titanium implants placed in rat tibiae, suggesting that alcohol may interfere in the osseointegration process of titanium implants.

Recobrimento de múltiplas recessões com enxerto subepitelial: tratamento de descontaminação da superfície radicular com laser de Erbium YAG

Multiple gingival recessions may cause mainly dentinary sensibility and aesthetic alterations. The subepithelial graft is a mucogingival technique which can be used to treat multiple gingival recessions. In this case report the Erbium YAG laser was applied to promote radicular surface decontamination, an important step to reach reinsertion of the gingival tissues on exposed radicular surface.

Wettability behavior of nanotubular TiO2 intended for biomedical applications

Nanotubes have been subject of studies with regard to their ability to promote differentiation of several cells lines. Nanotubes have been used to increase the roughness of the implant surfaces and to improve bone tissue integration on dental implant. In this study TiO2 nanotube layer prepared by anodic oxidation was evaluated. Nanotube formation was carried out using Glycerol-H2O DI(50-50 v/v)+NH4F(0,5 a 1,5% and 10-30V) for 1-3 hours at 37ºC. After nanostructure formation the topography of surface was observed using field-emission-scanning-microscope (FE-SEM). Contact angle was evaluated on the anodized and non-anodized surfaces using a water contact angle goniometer in sessile drop mode with 5 μL drops. In the case of nanotube formation and no treatment surface were presented 39,1° and 75,9°, respectively. The contact angle describing the wettability of the surface is enhanced, more hydrophilic, on the nanotube surfaces, which can be advantageous for enhancing protein adsorption and cell adhesion.

Reações alérgicas aos implantes osseointegráveis de titânio: uma revisão de literatura

Titanium dental implants have been common practice in the dental office, which can increases the number of allergic reactions to this material. Objectives: to alert dental surgeons and specialists of this possible phenomenon through a literature review. Material and methods: an electronic search at PubMed was performed with the keywords “dental implants”, “titanium”, and “allergy” from January 1990 to May 2013. Only articles published in the English language were included. Letters to editor were excluded. Results: from the 22 initially retrieved articles, only 7 were included, being 4 clinical case reports and 3 experimental studies. For clinical cases, the reactions included edema, erythema, exfoliative cheilitis, and eczema. Regarding experimental studies, skin rash and dermatitis were reported. A patch test was not used in two clinical reports. Only one study used histological analysis to attest the lack of allergic reactions. Conclusion: within the limits of the available literature, allergic reactions to titanium dental implants are extremely rare and seem to be related to the female gender. More controlled clinical studies are necessary to elucidate this question.

Avaliação dos preparos da superfície cerâmica para a colagem de acessórios ortodônticos

The purpose of this study was to evaluate the effects of two conditioning methods used to enhance the shear strength of orthodontic brackets bonded to porcelain surfaces. A total of 18 feldspathic specimens were used. The specimens were divided randomly into two groups (n = 9): group free silane, the porcelain specimens were etched with hidrofuoric acid 10% (Acid Gel-Maquira) for 4 minutes followed by adhesive-primer (Transbond XT) and the metallic brackets (Morelli Roth Light .022" x .030") were bonded with a light-cured microfilled resin (Transbond XT Light Cure Orthodontic Adhesive); group silane, the porcelain specimens were etched with hidrofuoric acid 10% (Acid Gel-Maquira) for 4 minutes followed by silane (Silano Ângelus) for 1 minute, adhesive-primer (Transbond XT) and the metallic brackets (Morelli Roth Light .022" x .030") were bonded with a light-cured microfilled resin (Transbond XT Light Cure Orthodontic Adhesive). All specimens were stored in solution of artificial saliva at ambient temperature for 24 hours. The debonding was done with shear strength through a universal testing machine (DL 500-Emic) calibrated with a fixed speed of 1mm/minute. Statical analysis was performed using the Student t test. The results indicated that in the free silane group the mean bond strength was 9,97 MPA, significantly lower than the silane group, that was 12,38 MPa (p < 0,05). The both groups were effective for bonding, although the silane group had the highest bond strength values.

Formulação de extrato aquoso de tremoço branco (Lupinus albus L.) adicionado de suco de pitanga utilizando metodologia de superfície de resposta

The aim of the present study was to verify, through the response surface methodology, the optimum conditions for the combined use of aqueous extract of white lupine (Lupinus albus L.) and tropical pitanga juice (Eugenia unifl ora L.) in the development of a drink. Therefore, the independent variables were represented by the volume of aqueous extract of lupine (mL) and by the volume of pitanga juice (mL). The dependent variables (responses) were obtained through sensory test of acceptance (“appearance”, “aroma”, “taste” and “overall acceptability”). The combined optimization of the variables pointed the second formulation (50mL of aqueous extract of lupine and 30mL of pitanga juice) of the experimental project as the most adequate. In conclusion it was possible to get a drink with attractive sensory characteristics using aqueous extract of white lupine and tropical pitanga juice. The usage of response surface methodology made possible the determination of regions of maximum acceptance for each attribute evaluated in the formulation of a drink with aqueous extract of white lupine and pitanga juice, with a minimum of tests.

Resposta olfativa de fêmeas de Chrysomya Megacephala (F.) (Diptera: Calliphoridae) frente a posturas prévias e caracterização química dos compostos apolares da superfície de seus ovos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Contribuições do design gráfico para o design de superfície

Graphic Design is a profession established with advent artistic vanguards of the twentieth century. As professional activity, it works with planning and projects which involve the visual solution of communication and information problems. Then, The Surface Design is the professional practice pledged with the elaboration of projects for coatings and application in products, giving attention to the production and materials in the processes. The relation between both Design areas is connected, at first, by the two-dimensional characteristic. In Brazil, academic study about Surface Design is in evolution and some universities works with this subject. Analyzing the concepts and characteristics concerning methodologies that comprehend both Graphic Design and Surface Design becomes a current and including subject. Therefore, it is necessary the conceptual unfolding and methodological in order to establish relations and contributions involved in the field of Graphic Design and apply them in Surface Design. Thus, the present study aimed to check concepts and particular functions of Graphic Design and to establish its relations and contributions for Surface Design. The results of this study can be used as teaching support and professional practice.

Design de superfície - abordagem qualitativa para fachadas corporativas

This paper reports the stage of a research on the corporate identity in commercial buildings. The objective of the research is to develop a system that aims to help the designer to enhance the transmission of the brand identity on the construction. At this step, we looked for the ascertainment of the variables that contribute to it in buildings considered as icons of brand identification in the building. And this paper also presents an analysis of a flagship located in Tokyo, from the Dior brand, which we used Surface Design techniques, combining cultural studies to geometric modeling, to Gestalt and Semiotics.